GROWNEER 550GPH Submersible Pump – on sale for $15.99 + Recirculating Draft Line Cleaning Build

GROWNEER 550GPH Submersible Pump 30W Ultra Quiet Fountain Water Pump, 2000L/H, with 7.2ft High Lift, 3 Nozzles for Aquarium, Fish Tank, Pond, Hydroponics, Statuary

550 GPH Subermsible Pump by Growneer

More Info
Highlighted Features
  • WATER FLOW CONTROL -- The GROWNEER water pump features a control knob to adjust the flow of water, allowing you to achieve the desired water pressure. The maximum flow rate is 550 GPH (2000 L/H). Note: It's recommended to use a residual current protection socket or circuit breaker when using outdoors
  • STRONG POWER & HIGH LIFT -- Maximum Lift Height: 7.2 ft. The water submersible pump model number is SML-630. 30W high-efficiency motor, energy-saving. Lift height refers to the maximum height that water rises after the water pipe is connected to the nozzle. (Make sure the joint is tightly sealed)
  • 3 NOZZLES WATER PUMP -- Each submersible water pump has 3 nozzles to choose from: 0.51"/0.62"/0.75". Provides different water flows according to your needs. Threaded fittings make it more stable. Detachable and cleanable
  • SUCTION CUP & 5.9FT POWER CORD -- The aquarium pump has a long enough cord for easy installation. 4 independent powerful suction cups help keep it in place so you can stick it vertically or horizontally to the right side of your aquarium
  • WIDE APPLICATION -- The water fountain pump circulates and aerates the water, making it more attractive to your fish or turtles. This submersible pump is ideal for aquariums, fountains, spouts hydroponic systems, etc

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

8/29 4:30 PM Central: This is on sale for $16.99. Shipping is also free to many US addresses with Prime Membership [Try Prime for Free] or a qualifying orderPrices, promotions and availability can change quickly.  Check product page for current info – More About Prices

GROWNEER 550GPH Submersible Pump 30W Ultra Quiet Fountain Water Pump, 2000L/H, with 7.2ft High Lift, 3 Nozzles for Aquarium, Fish Tank, Pond, Hydroponics, Statuary – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Our Line Cleaning Builds:

Also Consider:

ball lock jumperStainless Steel Ball Lock Jumper with Food Grade Silicone O-Rings: Allows you to connect multiple ball lock runs to clean multiple lines and taps at the same time. Works with both liquid and gas QDs.  Stainless Steel Ball Lock Jumper – via Valuebrew – An easy add-on… food grade o-rings, featured in our Keg Rebuild Post

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Leave a Reply