From the product description, check product page for current description, price and availability:

Our new NSF certified stainless steel five gallon kegs from Keg Land have two ball-lock male quick disconnect fittings that hold pressure even when not connected, allowing you to have several kegs aging while one is tapped. Also referred to as Corny Kegs or Soda Kegs. Precisely made with smooth robotically welded interior welds for ease of cleaning to stringent NSF standards. Made in China.

Features a 3 by 3.5″ oval lid for easy cleaning, and a pressure relief lid mounted valve for safety. An exclusive stainless hang tap is welded onto the inside of the lid to make it easier for you to suspend dry hopping bags and hop infusers. 25″ tall, and 8½” wide. These require 26″ of headspace once you connect ball lock fittings and hoses. Rubber bumpers on top and bottom protect this keg from damage.

From the product description, check product page for current description, price and availability:

Do you want to drink the clearest beer possible from your keg as quickly as possible? The Top Draw® Keg Lid Beer Pick Up Tube fits any homebrew keg with an oval lid, and includes a beer ball lock with a Top Draw Beer Pick Up Tube in the lid. As the level of the beer in the keg drops, the pick up tube remains 1″ below the surface, always drawing the clearest beer all the way until empty. The stainless float ball itself is 1.75″ in diameter.

Installs in a few seconds – just switch out keg lids. For shorter kegs, cut the silicone tube to length.

Includes 22″ of tubing, 304 grade stainless float with attached pickup tube, and oval keg lid with both a pressure relief valve, and a beer ball lock fitting welded into the center.

• Commentary: Pin Lock Keg Pricing and Availability
• Check Your CO2 Regulator for Leaks!
• How to get a keg ready for first use? New Keg Cleaning and Prep
• Portable Draft Beer Serving Options!
• Pin Lock Keg Pricing and Availability
• The Most Difficult Spot to Check for CO2 Leaks
• Keg O-Ring Materials Selection! – EPDM, Silicone and Buna-N?
• Why Do I Have Bubbles in My Beer Line? Diagnosing and Fixing Kegerator Foam Problems
• Five Benefits of Using Corny Kegs As Fermenters
• Rebuilding & Reconditioning Homebrew Kegs!
• Food Safe Replacement Keg O-Rings in Bulk
• Hands on Review: Kegland DuoTight Fittings & EVABarrier Tubing!
• Why Won’t My Beer Carbonate? Fixing Draft Beer Carbonation Problems
• What Does a Flow Control Faucet Do?
• Upgrade Your Kegerator – 6 Improvements!
• Serve Homebrew on Any Kegerator & Convert Commercial Kegerator to Homebrew
• Tips and Gear for Growler Filling
• What’s the Difference Between Ball Lock Kegs and Pin Lock Kegs?
• Checking for Draft System CO2 Leaks – Using The Pressure Gauge Method
• Tip: Consider Oetiker Stepless Clamps for Kegerator Gas and Beer Lines
• Hands On Review: Inkbird ITC-308 Dual Stage Temperature Controller +WiFi Version
• Universal Poppets Tips and Tricks!
• Convert Your Mark II Keg & Carboy Washer to a Recirculating Draft Line Cleaning Pump!
• Step by Step: Finding and Fixing Keg CO2 Leaks
• Kegerator Temperature Probe Placement – To Immerse or Not To Immerse? – three tests to determine optimal pla…
• Kegerator Beer Line Temperatures & Reducing Foam with a Recirculating Fan
• Kegging CO2 Use Estimations and Calculations
• Balancing Your Kegerator Draft System
• Building a Simple Ball Lock Draft Line Flushing Setup
• Build a Recirculating Draft Line Cleaning Pump
• Home Brew Keg Roundup – New & Used, 5 and 2.5 Gallon & More!
• Damp Kegerator? Fix Kegerator Condensation
• Homebrew Temp Controller Roundup! – Kegerator and Fermentation – concepts, applications and models
• Bulk Keg Orings and Keg Parts Reference