1,300 GPH! Submersible Water Pump – Draft Line Cleaning, Wort Chiller Recirculation

1300GPH Submersible Pump(5000L/H, 125W), Ultra Quiet Water Pump with 16.4ft. High Lift, Fountain Pump 3 Hose Adapter for Fish Tank, Pond, Aquarium, Statuary, Hydroponics, Hottub

Submersible Water Pump

More Info
Highlighted Features
  • Multifunctional Water Pump: Water Pump with the dimension:6.8*6.8*5.3inches, suitable for both indoor & outdoor use like aquariums, bird bathing, sculpture cleaning, vase fountains, etc.
  • With Bottom Suction Trainer: The water inlet is on the bottom of the pump, which could drain as much water as it can; The 360⁰ omnidirectional filtering cleans out excrement and crud while keeping water circulating all around.
  • Strong Power & High Lift: 1300GPH STRONG POWER and HIGH LIFT. Max Lift Height: 16.4 ft. 125W high efficiency motor for energy saving.
  • Ultra Quiet Design: The reliable and durable motor does not make much noise, providing you a quiet environment
  • Widely Applied: 5.9FT power cord long enough for easy installation. Equipped with 2/3", 4/5"and 1" in total 3 nozzles in the package. This submersible pump is perfect for aquarium, fountains, spout and hydroponic systems, etc.

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

Potential Uses:

  • I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly
  • As part of a recirculating wort chiller setup (on the chilled water side).

 

1300GPH Submersible Pump(5000L/H, 125W), Ultra Quiet Water Pump with 16.4ft. High Lift, Fountain Pump 3 Hose Adapter  – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Related: Our Line Cleaning Builds:

Also Consider:

ball lock jumperStainless Steel Ball Lock Jumper with Food Grade Silicone O-Rings: Allows you to connect multiple ball lock runs to clean multiple lines and taps at the same time. Works with both liquid and gas QDs.  Stainless Steel Ball Lock Jumper – via Valuebrew – An easy add-on… food grade o-rings, featured in our Keg Rebuild Post

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Leave a Reply