Ferroday Magnetic Drive Homebrew Pump w/Stainless Steel Head

FERRODAY Wort Pump Brewing Pump Magnetic Drive Pump Food Safe Water Pump High Temp Pump Stainless Head Wort Pump 15RM with 1/2"NPT Thread Homebrew Pump Brew Beer Pump - Grey

Homebrew Pump from Ferroday

More Info
Highlighted Features
  • Safely Transfer Liquid: note: This is a magnetic drive pump, not a self-priming pump, please install the pump at least 12 inches lower than your vessel, the pump needs to be filled with liquid before turning on the power, otherwise the liquid will be transported extremely slowly (mishandling). Not for use with high viscosity liquids. Transferring liquids is an important part of any brew operation, and the most easy and safe way to transferring liquids is to use magnetic pump, the propeller will magnetically circulates liquids.
  • Quiet and Efficient: The pump’s main shaft is separated from the impeller, which has damping and anti-vibration function, aim to reduce the influence of motor vibration during working. Realized a high efficiency smooth running, and excellent quiet circulation. Maximum Lifting Height: 2.7Meters. Please note: Moving giant vessel with hot wort by hand is not safe
  • Solid Magnetic Pump: Fully-sealed magnetic pump, motor with connecting the magnetic shaft and magnetic propeller, all magnetically coupled for enhanced operation. This is a High output volume and quiet operation pump, industrial and home brew equipment. Great heat resistant up to 120℃/ 248℉
  • Easy to Use: Prime by running liquid through the pump by connecting with water hose prior to turning it on; The liquid travels from the water hose into the pump, and once the pump is powered on, the propeller will start to circulate the liquids; Perfect for transferring and circulation
  • After-Sales Service: We are committed to offer you high quality product as well as superior service! Please feel free to tell if any problem, we would try our best to help. Provide technical support. It is not recommended to run this pump continuously for more than 2 hours to avoid overheating of the motor

 

I use my homebrew pump (different model and different manufacturer) for vorlaufing/recirculating, transferring from my mash tun to brew kettle, chilling with a recirculating wort chiller and transferring to my fermenter.

FERRODAY Wort Pump Brewing Pump Magnetic Drive Pump Food Safe Water Pump High Temp Pump Stainless Head Wort Pump 15RM with 1/2″NPT Thread Homebrew Pump Brew Beer Pump – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Leave a Reply