210 GPH Submersible Utility Pump + Our Draft Line Cleaning Builds
210 GPH Submersible Pump
More InfoFrom the product description, check product page for current description, price and availability:
Highlighted Features
- 【ADJUSTABLE】Designed with a adjusting knob, allowing to adjust the water flow rate.
- 【STEADY STAY】Rubber suction cups can be a good fit in the glass surface, to help keep it stability.
- 【CLEANABLE】No need any tools to detach it, easy to separate, easy to clean.
- 【ULTRA-QUIET】Energy-saving low power, keep reliability and low noise operation, giving you quiet environment.
- 【WIDELY USED】This submersible pump is perfect for aquariums, fountains, ponds and hydroponic systems, etc.
From HBF: Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions.
I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup. Note that fittings sizes are different on this pump vs the one I use in that build. Adjust accordingly Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.
Lyqily 210GPH Water Pump Ultra Quiet 15W Submersible Fountain Aquarium Fish Pond Hydroponic Pump with 5.2ft High Lift, 5.9ft Two-pin Plug Power Cord, 2 Nozzles (0.33“/0.51” – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link
Our Line Cleaning Builds:
- Build A Recirculating Draft Line Cleaning Pump
- Mark II Keg and Carboy Cleaner Draft Line Cleaning Pump Conversion
- Building a Simple Ball Lock Draft Line Flushing Setup
Also Consider:
Stainless Steel Ball Lock Jumper with Food Grade Silicone O-Rings: Allows you to connect multiple ball lock runs to clean multiple lines and taps at the same time. Works with both liquid and gas QDs. Stainless Steel Ball Lock Jumper – via Valuebrew – An easy add-on… food grade o-rings, featured in our Keg Rebuild Post
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
pinned amazon