2,200 Watt, 220V Stainless Heating Element

From the product description, check product page for current description, price and availability:

A powerful, 304 stainless steel heating element well suited for most kettles. With its weldless design and a diameter of 1 1/4″ it’s easy to install. Install by simply drilling a 1.25″ hole in your kettle and tightening the nut from the outside. The heating element requires a power cord which can be purchased separately (Electrical connection requires a computer power connection IEC320 C13 to your 220 v plug). 11.5″ Long”

• 2200 watt 220 v element
• Food grade, high temperature silicone seal
• The element itself is 11.5″ long, 0.75″ diameter
• Designed for use with 5 gallon batches

Please Note – Having electrical devices around liquid can be hazardous, and should not be left unattended. Please use caution while using this device, and read the instruction manual prior to use.

As if this posting, this is eBay offering is selling for just $44.99.  Shipping is also free to many US addresses.  Prices, shipping and availability can change quickly. Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this this post was published; however, they may differ from those you see when you visit the product page. Check the product page for current price, description and availability.

Beer Brewing 2200 Watt Stainless Steel Heating Element – Electric Kettle Keg

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

rp:ebay2200