![](https://www.homebrewfinds.com/wp-content/uploads/2023/02/vbblackgray.png)
3D Printed Pub Style Tap Handle
Updated: July 22, 2024
3D Printed Tap Handles!
A while back I got an XYZprinting Da Vinci 3D Printer. I think 3D Printing has a bunch of possible applications for homebrewing. From tap handles to stir plates and on and on.
Got a great homebrew-related 3D printer project? Let us know so we can spread the word!
Note that the 3D printer featured in this post out of production.
- See: Amazon Best Sellers in 3D Printers for current models
Related: Make an E-Paper Tap Handle!
This article contains affiliate links. We may make a small percentage if you use our links to make a purchase. You won’t pay more and you’ll be supporting Homebrew Finds and more content like this. Thank you for your support!
Here’s a look at a 3D printed Pub Style Tap Handle designed by “InfiniTTTy” and available on thingiverse. A link to the STL files and project description can be found below.
I printed this on my XYZprinting Da Vinci 1.0 3D Printer. Here’s a look toward the beginning of the process. Note that my printer is out of production. See: Amazon Best Sellers in 3D Printers for current models
Ta Da… Printed Thing! I printed this on the Da Vinci’s Best Setting. It took about 3 hours.
This also gets a decorative cap on the top. You can, of course, print either of these pieces in your choice of colors. The color is based on what color filament you’re using.
Finished product. The bottoms on these end up with a little extra material that needs trimmed. I’ve been doing that with a utility knife. The one thing I would change for this build would be… get a sharper utility knife. Mine was too dull. I could have ended up with cleaner lines with a sharper knife. It’s amazing to me that I printed this.
I attached the top piece on with Gorilla‘s Gorilla Super Glue. Gorilla makes some stellar products including Gorilla Duct Tape. I don’t consider it patched when using that.. I consider it permanently fixed… 🙂
For size comparison. From left to right Dry Erase Board Tap Handle, 3d Printed Pub Style Handle, Standard Black Faucet Handle
Update: HBF Reader Ray asked about material cost. Great question. I pulled out my AWS-100 Digital Gram Scale – Review – and weighed it up. It came out to 26.34 grams. This figured out to about $1.23 in filament when it was printed.
Installed. Just served an oatmeal stout.
This is a nice little tap handle. I did some pulling and bending on it and it held together just fine. One of the commenters on the thingiverse page indicates that they have been using it for two years. Other styles of tap handles are available on thingiverse. Of course, if you don’t find what you like you can always… make it.
- Amazon Best Sellers in 3D Printers for current models
- Pub Style Tap Handle by InfiniTTTy on thingiverse
Got a great homebrew-related 3D printer project? Let us know so we can spread the word!
Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds
Our Top Draft Resources
- The Most Difficult Spot to Check for CO2 Leaks
- Keg O-Ring Materials Selection! – EPDM, Silicone and Buna-N?
- Why Do I Have Bubbles in My Beer Line? Diagnosing and Fixing Kegerator Foam Problems
- Five Benefits of Using Corny Kegs As Fermenters
- Rebuilding & Reconditioning Homebrew Kegs!
- Food Safe Replacement Keg O-Rings in Bulk
- Hands on Review: Kegland DuoTight Fittings & EVABarrier Tubing!
- Why Won’t My Homebrew Keg Carbonate? Fixing Draft Beer Carbonation Problems
- What Does a Flow Control Faucet Do?
- Upgrade Your Kegerator – 6 Improvements!
- Serve Homebrew on Any Kegerator & Convert Commercial Kegerator to Homebrew
- Tips and Gear for Growler Filling
- What’s the Difference Between Ball Lock Kegs and Pin Lock Kegs?
- Checking for Draft System CO2 Leaks – Using The Pressure Gauge Method
- Tip: Consider Oetiker Stepless Clamps for Kegerator Gas and Beer Lines
- Hands On Review: Inkbird ITC-308 Dual Stage Temperature Controller +WiFi Version
- Universal Poppets Tips and Tricks!
- Convert Your Mark II Keg & Carboy Washer to a Recirculating Draft Line Cleaning Pump!
- Step by Step: Finding and Fixing Keg CO2 Leaks
- Kegerator Beer Line Temperatures & Reducing Foam with a Recirculating Fan
- Kegging CO2 Use Estimations and Calculations
- Step by Step: Balancing Your Kegerator Draft System
- Building a Simple Ball Lock Draft Line Flushing Setup
- Build a Recirculating Draft Line Cleaning Pump
- Home Brew Keg Roundup – New & Used, 5 and 2.5 Gallon & More!
- Damp Kegerator? Fix Kegerator Condensation
- Portable Draft Beer Serving Options!
- Homebrew Temp Controller Roundup! – Kegerator and Fermentation – concepts, applications and models
- Bulk Keg Orings and Keg Repair Part Numbers
standarddraft pinned
This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
greatdealsMore Homebrew Finds!
- Last 50 Finds!
- Top Deals – a curated list of the best deals
- Homebrew Reviews – one of the largest libraries of homebrew reviews in existence!
- Our Top Posts – tips, how-tos, resources posts and more
- Let’s be Friends!
Recent Deals!
10 Most Recent Homebrew Resource Posts & How-To’s!
We are Homebrew Review HQ! Our 10 Most Recent Reviews
Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions. tag:lnksfxd toppost:3dtaphandle tag:tpr
You can smooth the surface of parts printed with ABS filament by using a warm acetone vapor set up. I believe the method is posted on the reprap wiki.
Hello HBF,
In your searches, have you come across any food grade filament? Or more specifically, beer grade?
Thanks!
Guessing there is something out there, but I”m not sure. I will say… I don’t know that I would use this for anything that has significant contact with beer during or after fermentation. The surface on these prints is typically not perfect. I think there are just too many spots to harbor bacteria.