Building a Stainless Steel Spunding Valve

stainless steel spunding

A Spunding Valve allows you to maintain a set pressure.  If pressure in the vessel exceeds the set point, it is expelled.  It generally consists of an adjustable PRV valve, a tee, a gauge and a way to connect to your keg.  Read lots and lots more about Spunding Valves, ways to use them and different build options on our Spunding Valve Resource Post


Well… mostly stainless.  It’s going to be tough to get a stainless steel pressure gauge, Beyond, that, mostly stainless steel components are available.

Style 1: To connect the tee to an MFL QD, a swivel JIC to NPT fitting is required. Those are tough to find in stainless steel and usually… very expensive.  A solution to this piece of the puzzle is a very innovative ball lock QD that MoreBeer offers.  Instead of the typical flare threading, this one features MPT threads.  That means you don’t need a transitional fitting to get to the tee!

Torpedo Ball Lock Disconnect Gas In (Stainless) – 1/4 in. MPT KEG735

Ready Made Option – Ball Lock Spunding Valve (w/ Pressure Gauge) FIL42AS

This write-up is part of my Spunding Valve Resource Post – Jump To This Section

More Homebrew Finds!

Let’s Be Friends!

Subscribe To Our Email!8 Ways to Connect with HBF

Quick Catch-Ups

Top Content

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

adamztop5

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions. top:spundingvalvelnksto lnksto:spundingvalve rp:lnkstossspunding

Leave a Reply