Category Archives: Bottle Fillers

In Stock and Shipping… WilliamsWarn BrewBottler Counter Pressure Bottle Filler – $159.99

WilliamsWarn BrewBottler Counter Pressure Bottle Filler KEG921

WilliamsWarn BrewBottler Counter Pressure Bottle Filler via MoreBeer

More Info

From the product description, check product page for current description, price and availability:

The next generation WilliamsWarn BrewBottler. This counter-pressure bottle filler allows you to bottle from a ball lock homebrew keg without losing any carbonation. The BrewBottler can accommodate bottles up to approximately 330 mm (13″) in height and 150 mm (5.9″) in diameter. This allows a variety of bottle types to be used, including bottle sizes up to 3L (101 oz.).

Filling
Once the gas and beverage hoses are connected via the simple push-lock fittings on top of the valve, you just open the gas side for a few seconds to pressurize the bottle and purge air, close that and then open the beverage side to allow beverage to enter. With back-pressure in place, the beverage fills without foaming issues or carbonation loss. Pressure release and therefore fill flow rate are controlled by how open the variable pressure valve is set.

A 500ml bottle (1 US pint) can be filled in 40 seconds and a full 5-gallon keg can be bottled in roughly 30 minutes. Since your beer was already carbonated before you bottled it, your bottled beer is ready to consume immediately! And thanks to the purging process, your beer will be exposed to less oxygen and will maintain its original flavor profile for longer. Keep some bottles on hand, send them to your next competition, or take them to a party to impress your buddies.


 

  • MoreBeer has this for $159.99. If you’re familiar with WilliamsWarn you’ll recognize that this is very well priced for anything with their name on it.
  • Delivery is currently estimated in early May Update… It’s in stock and shipping as of this update. Check the product page to see if you can get in on this shipment.

WilliamsWarn BrewBottler Counter Pressure Bottle Filler KEG921

Also:

Continue reading

KegLand Counter Pressure Bottle Filler… on sale for $49.99

KegLand Counter Pressure Bottle Filler (Duotight Compatible) KEG910

KegLand Counter Pressure Bottle Filler (Duotight Compatible) via MoreBeer

More Info

From the product description, check product page for current description, price and availability:

Ready to head over to your friend’s spot, but all your homebrew is kegged? With the KegLand Counter Pressure Bottle Filler you can get those tasty suds into a to-go bottle in no time flat. Filling a growler straight from the tap is always an option, but if you want your beer to be at its best when you share it with the world, counter pressure filling is the only way to go. This handy filling device will make sure your brew doesn’t pick up oxygen or lose carbonation in the filling process, keeping your creation in tip-top condition.

The KegLand filler shines in its versatility. Few counter pressure fillers have as many connection options. Use your preffered 3/16″ or 1/4″ draft line clamped directly to the barbs. The barbs are Duotight-compatible, so you also have the option of using a 6.35mm x 8mm Duotight reducer to connect EVABarrier tubing—the best draft line option if you want to quickly break down the filler after use without fussing with hose clamps. Additionally, you can replace the barbs with Ball Lock Bulkheads to directly connect gas and bev QDs.

Whether you’re filling bottles to share or filling your competition submission, the KegLand Counter Pressure Filler will make sure your beer doesn’t suffer any degredation.

Features:

Foam free draw from the keg to bottle
Bleed valve to purge CO2 from the bottles
6.35mm (1/4″) Duotight compatible barb for CO2 inlet
6.35mm (1/4″) Duotight compatible barb for beer inlet
6.35mm (1/4″) Duotight compatible barb for blow off valve
Duotight fittings, ball lock bulkheads, and ball lock disconnects sold separately.

KegLand Part Number: KL01243


 

KegLand Counter Pressure Bottle Filler (Duotight Compatible) KEG910

Also:

Continue reading

KegLand Counter Pressure Bottle Filler… $39.99! Limited Availability

KegLand Counter Pressure Bottle Filler (Duotight Compatible) KEG910

KegLand Counter Pressure Bottle Filler (Duotight Compatible) via MoreBeer

More Info

From the product description, check product page for current description, price and availability:

Ready to head over to your friend’s spot, but all your homebrew is kegged? With the KegLand Counter Pressure Bottle Filler you can get those tasty suds into a to-go bottle in no time flat. Filling a growler straight from the tap is always an option, but if you want your beer to be at its best when you share it with the world, counter pressure filling is the only way to go. This handy filling device will make sure your brew doesn’t pick up oxygen or lose carbonation in the filling process, keeping your creation in tip-top condition.

The KegLand filler shines in its versatility. Few counter pressure fillers have as many connection options. Use your preffered 3/16″ or 1/4″ draft line clamped directly to the barbs. The barbs are Duotight-compatible, so you also have the option of using a 6.35mm x 8mm Duotight reducer to connect EVABarrier tubing—the best draft line option if you want to quickly break down the filler after use without fussing with hose clamps. Additionally, you can replace the barbs with Ball Lock Bulkheads to directly connect gas and bev QDs.

Whether you’re filling bottles to share or filling your competition submission, the KegLand Counter Pressure Filler will make sure your beer doesn’t suffer any degredation.

Features:

Foam free draw from the keg to bottle
Bleed valve to purge CO2 from the bottles
6.35mm (1/4″) Duotight compatible barb for CO2 inlet
6.35mm (1/4″) Duotight compatible barb for beer inlet
6.35mm (1/4″) Duotight compatible barb for blow off valve
Duotight fittings, ball lock bulkheads, and ball lock disconnects sold separately.

KegLand Part Number: KL01243


 

Limited Availability Deal of the Day: As of this posting, this on sale as as a MoreBeer Deal of the DayShipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

KegLand Counter Pressure Bottle Filler (Duotight Compatible) KEG910

Also:

Continue reading

Announcing: Kegland’s Nukatap Counter Pressure Bottle Filler!

Nukatap Counter Pressure Bottle Filler

Nukatap Counter Pressure Bottle Filler via MoreBeer

More Info

From the product description, check product page for current description, price and availability:

Running late but don’t want to leave home without a couple of bottles of your latest creation? The Nukatap Counter Pressure Bottle Filler will have your precious cargo packed and ready at the drop of a hat! Slip it right into the nozzle of your Nukatap, Intertap, or other forward-sealing faucet to fill bottles right from the tap. Gas can be quickly connected using a bare end of 8 mm OD EVABarrier tubing, or connect the included Ball Lock Adapter to hook up gas using a Ball Lock Quick Disconnect. Not enough room under your draft tower? No problem! Like the gas-in port, you can swap out the push-in spout for the Duotight adapter, allowing you to connect tubing directly to the filler, or connect a Ball Lock Post Adapter and use a Ball Lock jumper line to fill right off your keg. While other fillers on the market force you to purchase upgrade accessories to improve functionality, the Nukatap Filler gives you more options to fill right from the get-go.

This unit is designed to fill multiple sizes of beer bottles up to 500 mL thanks to the telescopic filling stem. We recommend starting with it fully extended, then insert the stem till your at the bottom of the bottle, purge the bottle with CO2, then press the stem all the way in to form a seal on your bottle.

Counterpressure filling is the absolute best option for packaging beer from your keg without affecting its quality. Filling a growler straight from the tap is always an option, but if you want your beer to be at its best when you share it with the world, this is only way to go. The Nukatap Filler will make sure your brew doesn’t pick up oxygen or lose carbonation in the filling process, keeping your creation in tip-top condition

Includes:

All stainless steel counter pressure filler
Push-in spout compatible with forward-sealing faucets
(2) 8 mm Duotight adapters for filler and NukaTap spout
(2) Ball Lock Post Adapters (Red / Yellow)
19.5″ length of 8 mm OD x 5 mm ID EVABarrier tubing
KegLand Part Number: KL21760


 

This connects directly to your compatible forward sealing faucet (Intertap, Nukatap and more) and allows you to easily counter fill bottles directly from the tap.

This is DuoTight compatible, although you don’t need to use DuoTights throughout your entire tap system to use it.

Nukatap Counter Pressure Bottle Filler

Learn More… Hands on Review Nukatap Counter Pressure Bottle Filler!

Continue reading

Yaebrew Stainless Steel Counter Pressure Bottle Filler

YaeBrew Counter Pressure Bottle Filler - Stainless Steel Beer Bottle Filler CO2 Kit Tool Homebrew

YaeBrew Counter Pressure Bottle Filler – Stainless Steel Beer Bottle Filler CO2 Kit Tool Homebrew


From the product description, check product page for current description, price and availability:

  • Hand held counter pressure filler
  • Fill bottles from keg without loosing carbonation
  • Adjustable pressure relief system
  • Material: 304 stainless steel
  • Flush and fill from the bottom of the bottle.

YaeBrew Counter Pressure Bottle Filler – Stainless Steel Beer Bottle Filler CO2 Kit Tool Homebrew – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Compare to: This from MoreBeer – this accomplishes the same basic purpose, however, note it is from a different manufacturer and most likely has different specs

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

adamztop5

Tapcooler Counter Pressure Bottle Filler for Forward Sealing Faucets + Hands on Review

Tapcooler Counter Pressure Bottle Filler for Forward Sealing Faucets

Tapcooler Counter Pressure Bottle Filler for Forward Sealing Faucets

More Info

Highlighted Features
  • Fill bottles of beer, directly from your tap/faucet with this innovative counter pressure filler.
  • Improves upon standard counter pressure fillers, as it plugs DIRECTLY into your draft system faucet (tap). Most solutions require you to hook up a separate liquid line, which is not something standard draft systems have setup and requires additional prep (i.e. more time). With the Tapcooler, you can have it setup and ready to go in less than a minute!
  • Connecting your CO2 line is also a snap. You can either hook up directly with a 3/16 in. push-fit line, or connect your line to the included barb fitting.
  • With the Tapcooler design, your beer AND CO2 are filled from the bottom of the bottle through the telescoping bottle connection tube. First CO2 flows down into the bottom of the bottle to flush from the bottom up. Next you open the tap and beer flows down the same tube, filling from the bottom up. The result is a more effective purging of oxygen and little to no foam during the filling process.
  • The filler features a push button CO2 purge valve which allows you to purge the bottle of oxygen before & after filling. It also includes an adjustable pressure relief valve, giving you the ability to change the filling speed. The pressure relief valve also acts as an overflow port for excess beer/foam to escape when filling.

 

Tapcooler Counter Pressure Bottle Filler for Forward Sealing Faucets – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Compare:

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

WilliamsWarn Counter Pressure Bottle Filler

WilliamsWarn Counter Pressure Bottle Filler

WilliamsWarn Counter Pressure Bottle Filler


From the product description, check product page for current description, price and availability:

  • The best counter-pressure Bottler available to the small-scale brewer. True counter pressure filling without any spillage or loss of CO2.
  • Bottle a fully carbonated 5 Gallon Cornelius Keg in under 30 minutes. Very easy to use (see video link below).
  • Adjustable height – can accommodate bottles from 205mm (8 inches) to 370mm (14.5 inches) height. Can fill growlers up to 3.75 inches in diameter.
  • The bottler will allow you to pressurize the bottle with CO2 before filling to allow counter pressure in the bottle and a CO2 layer to eliminate oxidation. Making sure your beverage doesn’t lose carbonation and freshness when bottled. A critical piece of equipment for any home brewer who enters home brew competitions. This is the difference between meddling at a beer competition and no mention at all.

WilliamsWarn Counter Pressure Bottle Filler – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Compare: WilliamsWarn Counter Pressure Bottle Filler at MoreBeer


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

adamztop5

Yaebrew Stainless Steel Counter Pressure Bottle Filler

YaeBrew Counter Pressure Bottle Filler - Stainless Steel Beer Bottle Filler CO2 Kit Tool Homebrew

YaeBrew Counter Pressure Bottle Filler – Stainless Steel Beer Bottle Filler CO2 Kit Tool Homebrew


From the product description, check product page for current description, price and availability:

  • Hand held counter pressure filler
  • Fill bottles from keg without loosing carbonation
  • Adjustable pressure relief system
  • Material: 304 stainless steel
  • Flush and fill from the bottom of the bottle.

YaeBrew Counter Pressure Bottle Filler – Stainless Steel Beer Bottle Filler CO2 Kit Tool Homebrew – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Compare to: This from MoreBeer – this accomplishes the same basic purpose, however, note it is from a different manufacturer and most likely has different specs

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

adamztop5

Yaebrew Stainless Steel Counter Pressure Bottle Filler

YaeBrew Counter Pressure Bottle Filler - Stainless Steel Beer Bottle Filler CO2 Kit Tool Homebrew

YaeBrew Counter Pressure Bottle Filler – Stainless Steel Beer Bottle Filler CO2 Kit Tool Homebrew


From the product description, check product page for current description, price and availability:

  • Hand held counter pressure filler
  • Fill bottles from keg without loosing carbonation
  • Adjustable pressure relief system
  • Material: 304 stainless steel
  • Flush and fill from the bottom of the bottle.

YaeBrew Counter Pressure Bottle Filler – Stainless Steel Beer Bottle Filler CO2 Kit Tool Homebrew – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Compare to: This from MoreBeer – this accomplishes the same basic purpose, however, note it is from a different manufacturer and most likely has different specs

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

adamztop5

Counter Pressure Bottle Filler, 304 Stainless Steel by Luckeg

Counter Pressure Beer Bottle Filler - LUCKEG Brand 304 Stainless Steel Beer Counter Pressure Filler CO2 Beer Brewing Kit for Home Brewing and Wine Making

Counter Pressure Beer Bottle Filler – LUCKEG Brand 304 Stainless Steel Beer Counter Pressure Filler CO2 Beer Brewing Kit for Home Brewing and Wine Making

More Info

From the product description, check product page for current description, price and availability:

  • 1.Material: 304 Stainless Steel for the Bottle Filler Body, Anti-rust, Corrosion Resistant and Durable;
  • 2.Easy Use: Very Efficient to bottle beer directly from the Beer Kegs, Will have no Sediment at the bottom of the bottle;
  • 3.Special: Features a special valve that allows CO2 and beer to flow down the same stainless tube, directly to the bottom of the bottle;
  • 4.Adjustable pressure relief on the side of the unit allows you control the speed of fill by adjusting the pressure in the bottle;
  • 5.Guarantee: Quality Guarantee, any problem for Bottle Filler, Money Back or Replacement free.

 

Counter Pressure Beer Bottle Filler – LUCKEG Brand 304 Stainless Steel Beer Counter Pressure Filler CO2 Beer Brewing Kit for Home Brewing and Wine Making


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Counter Pressure Bottle Filler with Gauge, 304 Stainless Steel

Counter Pressure Bottle Filler, Upgraded 304 Stainless Steel Home Brew CO2 Beer Bottle Growler Filler with 0-60 psi Pressure Gauge, 1/4'' Gas/Liquid Barb Bottling Brewing Kit

Counter Pressure Bottle Filler, Upgraded 304 Stainless Steel Home Brew CO2 Beer Bottle Growler Filler with 0-60 psi Pressure Gauge, 1/4” Gas/Liquid Barb Bottling Brewing Kit

More Info

From the product description, check product page for current description, price and availability:

  • 【Oxygen Free Filling & Less Foamy Mess】This “T” type counter pressure bottle filler stays stationary when moving the bottle and lets co2/beer flow down to the bottom of the bottle directly from the stainless tube. The gas stopper is placed tightly between the bottle and stainless tube, which provides a good seal without threat of popping off. All process means a faster transition between filling and capping, less oxygen ingress, minimal foaming and CO2 loss!
  • 【Pressure Gauge to Determine Bottle Pressure】Compared to the basic counter pressure bottle filler, this bottle filler is designed with a 0-60 psi pressure gauge to easily monitor the pressure in the bottle, no need to do pressure equivalence tests again and again, which effectively reduces unaccessary foam and bottling failures caused by unequal pressure between bottle and beer keg! Be sure that the bottle pressure is 3-5 psi lower than the keg pressure when liquid enters the bottle.
  • 【Simpler Structure & Easier to Use】This counter pressure bottle filler has been integrated the functional structure, simple enough but includes all necessary function parts. Features a special three-way valve on top that controls the co2/beer in and closes the bottle filler. A pressure relief valve on the side allows you to control the speed of filling by adjusting pressure in the bottle. The function setting makes this bottle filler easy to use with one hand while the other holds the bottle!
  • 【Healthy & Sturdy Stainless Steel】This beer bottle filler is mainly made of stainless steel 304, features great anti-rust & anti-corrosion characteristics, has a solid construction, all parts connect each other tightly. All components in contact with beer are made of stainless steel or silicone that will not produce any strange smell and provide you with fresh beer. Durable bottle filler features a long life that you don’t need buy other bottling tools frequently, efficiently saves your wallet!
  • 【Great Extension Ability & Fill Larger Bottles】 The gas stopper that comes with this bottle filler model is designed for the bottles whose inside diameter is greater than 0.67 inch but less than 1 inch, usually can fill 12 oz bottles, 22 oz bottles, growlers and also can fill other larger size bottles by replacing the oringinal gas stopper with your own other different size gas stoppers. If you are not fully satisfied with our product, please remember that we are always here for you.

 

Compare: Deluxe Counter Pressure Bottle Filler KEG804 – via MoreBeer, not identical, but similar function

Counter Pressure Bottle Filler, Upgraded 304 Stainless Steel Home Brew CO2 Beer Bottle Growler Filler with 0-60 psi Pressure Gauge, 1/4” Gas/Liquid Barb Bottling Brewing Kit – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link



Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Yaebrew Stainless Steel Counter Pressure Bottle Filler

YaeBrew Counter Pressure Bottle Filler - Stainless Steel Beer Bottle Filler CO2 Kit Tool Homebrew

YaeBrew Counter Pressure Bottle Filler – Stainless Steel Beer Bottle Filler CO2 Kit Tool Homebrew


From the product description, check product page for current description, price and availability:

  • Hand held counter pressure filler
  • Fill bottles from keg without loosing carbonation
  • Adjustable pressure relief system
  • Material: 304 stainless steel
  • Flush and fill from the bottom of the bottle.

YaeBrew Counter Pressure Bottle Filler – Stainless Steel Beer Bottle Filler CO2 Kit Tool Homebrew – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link



Compare to: This from MoreBeer – this accomplishes the same basic purpose, however, note it is from a different manufacturer and most likely has different specs


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

adamztop5

Stainless Steel Spring Loaded Bottle Filler

Beer Bottle Filler 13.7in Stainless Steel Brewing Accessories Bottling Tubing Filler

Beer Bottle Filler 13.7in Stainless Steel Brewing Accessories Bottling Tubing Filler

More Info

From the product description, check product page for current description, price and availability:

  • ✿ Made of high quality stainless steel, better than plastic
  • ✿ Easy to fill, filling bottles from the bottom up, not spilling beer when bottling
  • ✿ Bottle filling machine that is easy to clean and disinfect, preferably using a bucket with a filling faucet
  • ✿ The spring at the tip of the bottler stops the flowing until you press it to the bottom of the bottle
  • ✿ Stainless steel bottle filling, 4 inch tubing, highly resistant to corrosion inside and outside, ideal for humid gases

 

Beer Bottle Filler 13.7in Stainless Steel Brewing Accessories Bottling Tubing Filler – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Yaebrew Stainless Steel Counter Pressure Bottle Filler

YaeBrew Counter Pressure Bottle Filler - Stainless Steel Beer Bottle Filler CO2 Kit Tool Homebrew

YaeBrew Counter Pressure Bottle Filler – Stainless Steel Beer Bottle Filler CO2 Kit Tool Homebrew


From the product description, check product page for current description, price and availability:

  • Hand held counter pressure filler
  • Fill bottles from keg without loosing carbonation
  • Adjustable pressure relief system
  • Material: 304 stainless steel
  • Flush and fill from the bottom of the bottle.

YaeBrew Counter Pressure Bottle Filler – Stainless Steel Beer Bottle Filler CO2 Kit Tool Homebrew – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link



Compare to: This from MoreBeer – this accomplishes the same basic purpose, however, note it is from a different manufacturer and most likely has different specs


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

adamztop5

Counter Pressure Bottle Filler with Gauge, 304 Stainless Steel

Counter Pressure Bottle Filler, Upgraded 304 Stainless Steel Home Brew CO2 Beer Bottle Growler Filler with 0-60 psi Pressure Gauge, 1/4'' Gas/Liquid Barb Bottling Brewing Kit

Counter Pressure Bottle Filler, Upgraded 304 Stainless Steel Home Brew CO2 Beer Bottle Growler Filler with 0-60 psi Pressure Gauge, 1/4” Gas/Liquid Barb Bottling Brewing Kit

More Info

From the product description, check product page for current description, price and availability:

  • 【Oxygen Free Filling & Less Foamy Mess】This “T” type counter pressure bottle filler stays stationary when moving the bottle and lets co2/beer flow down to the bottom of the bottle directly from the stainless tube. The gas stopper is placed tightly between the bottle and stainless tube, which provides a good seal without threat of popping off. All process means a faster transition between filling and capping, less oxygen ingress, minimal foaming and CO2 loss!
  • 【Pressure Gauge to Determine Bottle Pressure】Compared to the basic counter pressure bottle filler, this bottle filler is designed with a 0-60 psi pressure gauge to easily monitor the pressure in the bottle, no need to do pressure equivalence tests again and again, which effectively reduces unaccessary foam and bottling failures caused by unequal pressure between bottle and beer keg! Be sure that the bottle pressure is 3-5 psi lower than the keg pressure when liquid enters the bottle.
  • 【Simpler Structure & Easier to Use】This counter pressure bottle filler has been integrated the functional structure, simple enough but includes all necessary function parts. Features a special three-way valve on top that controls the co2/beer in and closes the bottle filler. A pressure relief valve on the side allows you to control the speed of filling by adjusting pressure in the bottle. The function setting makes this bottle filler easy to use with one hand while the other holds the bottle!
  • 【Healthy & Sturdy Stainless Steel】This beer bottle filler is mainly made of stainless steel 304, features great anti-rust & anti-corrosion characteristics, has a solid construction, all parts connect each other tightly. All components in contact with beer are made of stainless steel or silicone that will not produce any strange smell and provide you with fresh beer. Durable bottle filler features a long life that you don’t need buy other bottling tools frequently, efficiently saves your wallet!
  • 【Great Extension Ability & Fill Larger Bottles】 The gas stopper that comes with this bottle filler model is designed for the bottles whose inside diameter is greater than 0.67 inch but less than 1 inch, usually can fill 12 oz bottles, 22 oz bottles, growlers and also can fill other larger size bottles by replacing the oringinal gas stopper with your own other different size gas stoppers. If you are not fully satisfied with our product, please remember that we are always here for you.

 

Compare: Deluxe Counter Pressure Bottle Filler KEG804 – via MoreBeer, not identical, but similar function

Counter Pressure Bottle Filler, Upgraded 304 Stainless Steel Home Brew CO2 Beer Bottle Growler Filler with 0-60 psi Pressure Gauge, 1/4” Gas/Liquid Barb Bottling Brewing Kit – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

14″ Stainless Steel Spring Loaded Bottle Filler + Cleaning Brush

Eyourlife 304 Stainless Steel Bottling Stick 14" Length Spring Loaded Beer Bottle Filler Set with Filler Brush, Using 3/8’’ Tube

Eyourlife 304 Stainless Steel Bottling Stick 14″ Length Spring Loaded Beer Bottle Filler Set with Filler Brush, Using 3/8’’ Tube

More Info

From the product description, check product page for current description, price and availability:

  • __Easy to sanitize: Due to the design of removable Spring Loaded, it can be cleaned easily. And it also comes with free bottle brush to help you clean the filler.
  • __Convenient to use: Step 1: Attach the 3/8″ silicone tube to the top side; Step 2:connect the tubing to the tap of the keg and depress the spring-loaded button foot-valve against the bottom of the bottle or container to start filling. Step 3: When you press the wand tip against the bottom of the bottle, bottling wand starts its flow, stops when you lower the bottle away from it.
  • __Size: Total length:35cm/14″. End caliber:9.5mm. No more having to fiddle with the spigot during bottling, and no more mess from the dripping hose between bottles!
  • __Products included: 1 x Nylon Bristle Brush; 1 x Loaded Bottle Filler. Quality & Satisfaction Warranty.

 

Eyourlife 304 Stainless Steel Bottling Stick 14″ Length Spring Loaded Beer Bottle Filler Set with Filler Brush, Using 3/8’’ Tube – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Yaebrew Stainless Steel Counter Pressure Bottle Filler

YaeBrew Counter Pressure Bottle Filler - Stainless Steel Beer Bottle Filler CO2 Kit Tool Homebrew

YaeBrew Counter Pressure Bottle Filler – Stainless Steel Beer Bottle Filler CO2 Kit Tool Homebrew


From the product description, check product page for current description, price and availability:

  • Hand held counter pressure filler
  • Fill bottles from keg without loosing carbonation
  • Adjustable pressure relief system
  • Material: 304 stainless steel
  • Flush and fill from the bottom of the bottle.

YaeBrew Counter Pressure Bottle Filler – Stainless Steel Beer Bottle Filler CO2 Kit Tool Homebrew – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Compare to: This from MoreBeer – this accomplishes the same basic purpose, however, note it is from a different manufacturer and most likely has different specs


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

adamztop5

Save on Used Counter Pressure Bottle Fillers at MoreBeer

9104

  • As of this posting, MoreBeer has a limited number of used counter pressure bottle fillers on sale.  Selections include the standard offering and the deluxe counter pressure bottle filler.
  • Availability is limited.
  • Shipping is also free to most US addresses with most $59 orders.

Counter Pressure Bottle Fillers at MoreBeer < sorts to show sale items first

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Check sale or product page for current availability & pricing

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:b3si

Tapcooler Counter Pressure Bottle Filler for Forward Sealing Faucets + Hands on Review

Tapcooler Counter Pressure Bottle Filler for Forward Sealing Faucets

Tapcooler Counter Pressure Bottle Filler for Forward Sealing Faucets

More Info


Highlighted Features
  • Fill bottles of beer, directly from your tap/faucet with this innovative counter pressure filler.
  • Improves upon standard counter pressure fillers, as it plugs DIRECTLY into your draft system faucet (tap). Most solutions require you to hook up a separate liquid line, which is not something standard draft systems have setup and requires additional prep (i.e. more time). With the Tapcooler, you can have it setup and ready to go in less than a minute!
  • Connecting your CO2 line is also a snap. You can either hook up directly with a 3/16 in. push-fit line, or connect your line to the included barb fitting.
  • With the Tapcooler design, your beer AND CO2 are filled from the bottom of the bottle through the telescoping bottle connection tube. First CO2 flows down into the bottom of the bottle to flush from the bottom up. Next you open the tap and beer flows down the same tube, filling from the bottom up. The result is a more effective purging of oxygen and little to no foam during the filling process.
  • The filler features a push button CO2 purge valve which allows you to purge the bottle of oxygen before & after filling. It also includes an adjustable pressure relief valve, giving you the ability to change the filling speed. The pressure relief valve also acts as an overflow port for excess beer/foam to escape when filling.

 

Tapcooler Counter Pressure Bottle Filler for Forward Sealing Faucets – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Compare:

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Rare Deal, Buy a Blichmann Beer Gun Bottle Filler, Get a Free $20 Gift Card + Hands on Review

blichmann engineering beer gun deal

Blichmann Beer Gun Bottle Filler via Adventures in Homebrewing

More Info

From the product description, check product page for current description, price and availability:

Introducing the new and improved Blichmann BeerGun Bottle Filler 2.0! More ergonomic, faster and easier to clean, and even more intuitive!

New Features Include:

  • Accessory Kit #1 now included as a standard item(Shipped From Blichmann with a Ball Lock Fitting, Pin lock Will need to be added as a separate item)
  • Ergonomic warm-touch grip with ambidextrous thumb actuated CO2 valve
  • Positively retained beer seal tip – no more lost tips!
  • Anti-microbial beer hose keeps contamination at bay!
  • Includes a convenient plastic tool case
  • Tool free super fast disassembly

 

  • Blichmann gear is rarely discounted as it is generally under a MAP (minimum advertised pricing agreement).  For the most part, the price is similar no matter where buy it.
  • As of this posting, this combo is selling for $112.13.  This is a bit higher than what I understand MAP to be.  Compare at MoreBeer.
  • Free Gift Card!  As of this posting, Adventures in Homebrewing is giving away a free $20 gift card, with every single purchase of $100 or moreEVERYTHING QUALIFIES.  The one exception is gift cards.  Promotional gift card will be automatically added to your cart.
  • Get Free Shipping: Shipping is free to addresses in the contiguous US.
  • Note that no Blichmann product is directly discounted.  All Blichmann gear is selling for full price.  With this deal, you get a free gift card good toward a future purchase.

Blichmann BeerGun Bpttle Filler with Accessory Kit

Check sale or product page for current availability & pricing

Related Reviews:

Blichmann Engineering Reviews!

More Homebrew Finds!

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

aih

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.  prod:aihbeergun tag:aihfreegc