Category Archives: Bottling

Rare Deal: Cannular Bench Top Can Seamer – Now a MAP Item – get a free $25 Gift Card + Hands on Review

Cannular Bench Top Can Seamer

Cannular Bench Top Can Seamer via Austin Homebrew Supply

More Info

From the product description, check product page for current description, price and availability:

Cannular Bench Top Can Seamer

The Cannular is a manual can seamer that is easy to use, reliable, and beautifully simple.

Whether you’re a brewery looking to offer canned beer to go or a homebrewer wanting to keep your creations fresh and fully protected from light, the Cannular is the answer. This bench top unit is one of the most compact and easy to use can seamers you’ll find. The Cannular only requires one person to operate, and each can takes roughly 5 seconds to seam. With a two-person team, one filling and one seaming, the Cannular becomes a suitable option for nano breweries doing small canning production runs.

The Cannular’s table spacer is specifically designed to work with 500ml (16.9 oz) Can Fresh aluminum cans (Available Here or Check the Options Above!). 330ml (11.2 oz) Can Fresh cans are also available (Available Here or Check the Options Above!), but you will need the correct table spacer to use them with the seamer (Available Here or Check the Options Above!). We have tested standard 202 cans and have been able to achieve good seals with proper adjustments. It is necessary to adjust the table height to ensure you have the appropriate amount of pressure applied when the can lift is raised.

Operation:
The beauty of the Cannular lies in how truly simple it is to operate. With only three points of operation, it only takes a few minutes to familiarize yourself with the machine. The seaming process is as follows:

Place lid atop the can and place the can on the table spacer
Turn the platform lever clockwise to raise the can to the seamer
Press the button to turn the machine on and begin spinning the can
Push the seaming lever away from you and hold for 1-2 seconds
Pull the seaming lever towards you and hold for 1-2 seconds
Press the button to turn off the machine and stop spinning the can
Turn the platform lever counterclockwise to lower the can
That’s all there is to it!

Construction:
The Cannular was designed to be compact, durable, and safe to operate in a wet environment. The platform assembly is made from 304 grade stainless steel, so no matter how messy your canning gets, there’s no need to worry about rusting or degradation. The body of the unit is made from hammered sheet metal and fastened together with stainless steel screws. Rubber feet help keep the unit from slipping and sliding while in use. In addition, the Cannular features built-in brackets near the feet so you have the option to mount the machine to your counter or bench-top. The Cannular runs off of 24V DC power via the Anderson socket located on the back. This lower voltage was chosen specifically to make the unit as safe to use in a wet environment as possible.

Power:
As noted above, the Cannular comes with a 24V DC Anderson socket located on the back of the unit. It does not, however, include a cord and plug. When purchasing the unit, you have the option of pairing it with either a power supply with 110V plug (Available Here or Check the Options Above!), or with a 6 ft. long cord with Anderson plug and alligator clips (Available Here or Check the Options Above!). The power supply is straight forward, and allows you to plug the unit into a standard 110V power socket. The alligator clips give you the option to power the unit from a battery, and can even be used with an 18V cordless power drill battery. This is certainly the most affordable option for powering the Cannular, and we’ve found that upwards of 200 cans can be seamed on a single battery charge.

Why Cans?
So why can when you can bottle? There’s no doubt that canning has become a more and more popular format for packaging beer among craft breweries over the last several years, and with good reason. Aluminum cans aren’t just more environmentally friendly than bottles, since cans require less energy to transport and recycle, they’re also much better at protecting the quality of the beer. Whereas bottles allow in light, which leads to skunking, aluminum cans offer 100% protection from UV.

Specifications:
Power: 250W
Rated Speed: 3300 RPM
Gearbox Ratio: 9.8 : 1
Dimensions: 14″ L x 9″ W x 19.5″ H
Weight: 40 lbs

The table spacer included with the Cannular is specifically designed to use Can Fresh 500ml aluminum cans, which are 167.8mm tall and 52.4mm in diameter. To use the Cannular with 11oz cans, you will need a Cannular Table Spacer for 330ml/11.1 oz. Cans.

When you receive your Cannular, the rollers have been set and tested at the factory. They should not need adjustment for 100,000 cans. The table, however, comes unadjusted and getting it set up correctly is very important to getting a proper seal. Cannular’s test show that a .4mm (.015″) actual overlap is all that is needed to seal to 90 PSI. The proper table tension takes a little practice and expect to waste a few cans getting it dialed in. Once you learn the proper tension re-adjusting it is very quick and easy. You want the tension to be tight but not so tight as to dent the can. Use cans at your fill height with water for proper tension adjustment.


 

  • The Cannular has become a MAP item.  MAP = Minimum Advertised Priced.  This is an agreement between manufacturers and retailers to sell items at a minimum price.  In practice it means that the Cannular will, generally speaking, not be discounted.
  • Free $25 Gift Card! As of this posting, Austin Homebrew Supply is giving away a free $25 gift card with all purchases of $100 or more.  I believe that the only exclusion is… gift cards.  This equates to a back door discount on lots of product lines that typically are not discounted.  It also stacks with items that are already on sale.  No coupon code is necessary.  The promotional gift card will be automatically added to your cart when you place $100 of qualifying merchandise in your cart.
  • It’s important to note that the Cannular is selling for full price.  The free gift card is toward a future purchase.
  • Learn More: Hands on Review: Kegland Cannular Bench Top Can Seamer – Homebrew Canner

Cannular Bench Top Can Seamer

Check sale or product page for current availability & pricing

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

tag:ahsgc

Thunder Group Full Size Sheet Pan – 18″ x 26″ – for Bottling & BBQ

More Info

From the product description, check product page for current description, price and availability:

  • Constructed out of durable aluminum
  • THE FULL SIZE SHEET PAN IS DESIGNED FOR USE IN LARGE COMMERICAL SIZE OVENS ONLY.
  • PLEASE MEASURE SIZE OF HOME OVEN TO VERIFY THE PAN WILL FIT 26″ WIDTH BEFORE PURCHASE.
  • Sheet pans are stackable for easy storage
  • NSF approved
  • Wire-reinforced rim

 

Why is this on Homebrew Finds?

  • How about tray that has a 54 bottle (or so) capacity to making bottling day easier?
  • The pictured tray (Thunder Group ALSP1826) is actually a full size sheet pan that’s about 18″ x 26″.  As you can see it easily hold 54 bottles.  Those are Anchor Steam bottles which are a little wider than standard beer bottles.  You can probably get a few more long neck style bottles on a full size sheet pan.  This is large enough to hold enough bottles for a full 5 gallon batch.  If you leave 1/2 gallon of trub behind, you would use right around 48 (12) ounce bottles.  These are estimates.
  • This tray catches those in-between bottle drips, helps keep your bottling area clean and generally speeds up bottling and cleanup.’
  • +BBQ…. When you’re done you have one tray to rinse off.  This also pulls double duty for me come time to BBQ.  I use this tray for preparing and transporting ribs.  Note that this is actually too large to fit in my standard size oven.  I like that because it means it stays out of the oven and I don’t have to worry about odds and ends getting baked on to it.

Thunder Group ALSP1826 19 Gauge Sheet Pan, Full Size 18″ x 26″ – this is the pan that’s pictured above – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also Search Amazon for “full size sheet pan”.  If you’re looking for something similar to mine, look for 18″ x 26″

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Stainless Steel Bottler Filler AND Cleaning Brush

Vaorwne 13.7 Length Food Grade Stainless Steel Spring Loaded Beer Bottle Filler With 13.7 Nylon Cleaning Brush Home Brewing

Vaorwne 13.7 Length Food Grade Stainless Steel Spring Loaded Beer Bottle Filler With 13.7 Nylon Cleaning Brush Home Brewing

More Info

From the product description, check product page for current description, price and availability:

  • Highly corrosion-resistant interior and exterior-Perfect for wet gases,Cylinders perform well at low temperatures
  • A removable tip and spring that make this model easy to sanitize.
  • Food Grade Stainless Steel 304 bottle filler
  • Easy to clean and sanitize,Spring loaded tip for easy filling,Fills bottles form bottom up,Keeps from spilling Brew during bottling
  • the nozzle spring can be removed if you prefer the action of a springless bottle filler.

 

Vaorwne 13.7 Length Food Grade Stainless Steel Spring Loaded Beer Bottle Filler With 13.7 Nylon Cleaning Brush Home Brewing – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link



This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

adamztop5

Announcing: Tapcooler Counter Pressure Bottle Filler for Forward Sealing Faucets! + Hands on Review

TAPCOOLER COUNTER PRESSURE BOTTLE FILLER FOR FORWARD SEALING FAUCETS

Tapcooler Counter Pressure Bottle Filler for Forward Sealing Faucets via Great Fermentations

More Info

From the product description, check product page for current description, price and availability:

  • The Tapcooler Counter Pressure Bottle Filler is an all-new, easy-to-use bottling device!
  • Allows you to perfectly bottle beer from a forward-sealing beer faucet without CO2 loss.
  • Purge bottles and headspace with CO2 to keep oxygen out, prolonging the life of your beer.
  • Perfect for bottling for competitions, sending bottles home with friends, or to take on the go!
  • Easy to setup and super easy clean.

Exclusive to Great Fermentations, the Tapcooler Counter Pressure Bottle Filler is the #1 way to fill bottles of your homebrew, directly from your kegging system. No more messing with alternate liquid lines or hard to assemble contraptions. Just fit the Tapcooler into any forward sealing faucet (i.e. Perlick, Intertap/Ultratap/Vent-Matic, etc..), hook up a CO2 line, and you’re good to go. Fill bottles for a competition, or just fill a couple take home bottles for your friends. The Tapcooler is quick and easy to use, and will help maintain the flavor, aroma, and carbonation level of your beer so it tastes the same out of the bottle as it would out of the tap.

FEATURES
For starters, a counter pressure bottle filler is better than most bottling solutions, as the bottle is under pressure while the carbonated beer flows in. Because the interior of the bottle is pressurized there is minimal loss of the CO2 in solution.

The Tapcooler solution improves upon the standard counter pressure filler, as it plugs DIRECTLY into your draft system faucet (tap). Most solutions require you to hook up a separate liquid line, which is not something standard draft systems have setup and requires additional prep (i.e. more time). With the Tapcooler, you can have it setup and ready to go in less than a minute! The Tapcooler design is also advantageous because after you are done filling the bottle, it stays in place hooked up to your faucet vs. other fillers require you to set aside and pick back up again for the next bottle.

Connecting your CO2 line is also a snap. You can either hook up directly with a 3/16 in. push-fit line, or connect your line to the included barb fitting. Optionally, you can purchase the gas ball lock adapter (item #GF884) which gives you the ability to attach a gas (grey) disconnect directly to the filler unit. This optional accessory is a MUST HAVE in our book!

With the Tapcooler design, your beer AND CO2 are filled from the bottom of the bottle through the telescoping bottle connection tube. First CO2 flows down into the bottom of the bottle to flush from the bottom up. Next you open the tap and beer flows down the same tube, filling from the bottom up. The result is a more effective purging of oxygen and little to no foam during the filling process

The telescoping bottle connection tube allows you to fill bottles as small as 4.5 in. tall up to 12.5 in. You can fill taller bottles with the Tapcooler, but the tube will not reach the bottom of the bottle which can lead to some splashing. When filling large mouth containers, a bottle stopper of suitable size and with a 9 mm hole may be used.

The filler features a push button CO2 purge valve which allows you to purge the bottle of oxygen before & after filling. It also includes an adjustable pressure relief valve, giving you the ability to change the filling speed. The pressure relief valve also acts as an overflow port for excess beer/foam to escape when filling.

One of our most favorite features of the Tapcooler, is that is super easy to clean. Cleaning other bottle fillers can be a chore and take lots of time. The Tapcooler comes apart easily and allows you to clean all parts effectively and easily after each use.

All metal parts that come into contact with your beer, are made of stainless steel (SS304). The barb and ball lock CO2 adaptors are made of aluminium.

Lastly, the Tapcooler comes chalk full of optional accessories which will adapt your filler perfectly to your setup. See the related parts section below for list of them!

FORWARD SEALING FAUCET COMPATIBLE
Tapcooler fits Ultratap, Vent-Matic, Perlick 600 series and Intertap faucets. These fillers can be converted to fit Perlick 500 series with optional tap connector (Item #GF891). Cannot be used with ventilated beer taps, i.e. not forward sealing beer taps.

SUMMARY OF AWESOMENESS

  • Hooks up directly to any forward sealing faucet for quick and easy use.
  • Quick setup and easy maintenance.
  • Perfect for bottling for competitions, sending bottles home with friends, or just to have some bottles on the go!
  • A range of accessories are offered for more range and easier use!
  • Purge bottles with CO2 before and after filling for longer lasting beer!
  • Pressure relief valve allows for control over filling speed and allows excess foam to escape for the perfect pour every time!
  • Stainless Steel design
  • Easy to use and clean!

 

This connects directly to your compatible forward sealing faucet (Ultratap, Vent-Matic, Perlick 600 series and Intertap – Review) and allows you to easily counter fill bottles directly from the tap!

  • Current price is $79.99.  Some additional add-ons are available on the product page.
  • FREE Shipping.  Great Fermentations is offering free shipping for qualifying orders of $55 or more to addresses on the contiguous US.
  • This has had some serious stock issues.  A general log as I’ve seen it can be found below.  As of this posting, it’s available again.  Based on past sell-outs, my recommendation would be to purchase sooner rather than later if you’re interested.  Check the product page to see if this is still around.

Availability Updates, approximate dates:

  • 1/13/20: This was a quick sellout when we introduced it.
  • 1/15/20: It became available again a while after.
  • 1/16/20: It moved to pre-order status not too long after becoming available again.
  • 1/17/20: These came back in stock.
  • 1/20/20: Sold out again sometime between 17th and 20th.  Pre-orders are not being taken this time.
  • 1/30/20 These came back in stock and sold out within hours
  • 4/30/20: Back in stock!  Get it while you can.
  • 5/11/20:  Out of stock again!  Hundreds of these sold in several days time.
  • We’re keeping a close on on the Tapcooler!  Connect with Homebrew Finds to Stay in the loop!

TAPCOOLER COUNTER PRESSURE BOTTLE FILLER FOR FORWARD SEALING FAUCETS

Learn More!  Hands on Review: Tapcooler Counter Pressure Bottle Filler for Forward Sealing Faucets!

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

pst:tcgf

Neoprene Insulated 6 Pack Carrier + Opener

G Francis 6 Pack Cooler Tote Beer Holder with Beer Bottle Opener Keychain - Neoprene Water Bottle Carrier, Beer Bottle Cooler Bag

G Francis 6 Pack Cooler Tote Beer Holder with Beer Bottle Opener Keychain – Neoprene Water Bottle Carrier, Beer Bottle Cooler Bag

More Info

From the product description, check product page for current description, price and availability:

  • NEOPRENE INSULATED CAN AND BOTTLE CARRIER: The G. Francis Neoprene 6 Pack Bottle Carrier with Beer Opener Keychain is great for on the go traveling, parties, BBQ, beaches, festivals, concerts, sport events and other indoor/ outdoor activities; The neoprene bottle sleeve helps to keep your beverages at a consistent temperature for up to 4 hours
  • NOT JUST FOR BEER: While this insulated beer bottle holder is designed for carrying beer bottles, it can be used for other liquids as well; Great for beer bottles, baby bottles, soda cans, juice boxes, coffee bottles, water bottles and most other bottles ranging from 8-20 ounces; The insulated bottle bag can fit (6) cans or bottles of your favorite beverages
  • STYLISH AND FUNCTIONAL: This bottle sleeve beer carrier comes in a soft black neoprene material making your new beer caddy discrete but also stylish; This soft fabric will protect your glass bottles from breaking and with the attached bartender bottle opener you can easily crack open your favorite drinks; this stylish bag can also be great for daycares and parents as an insulated bag for baby bottles or kids water bottle holder
  • GREAT FOR GIFTS: This water bottle cooler drink carrier and bottle openers are machine washable and lightweight; The bar bottle opener is made of stainless steel and can be unattached from the bag; Not only does the six pack cooler tote keep beer cold while allowing you to bring it where you go, but the neoprene insulated bottle holder insulates drinks for up to 4 hours making the beer cooler ideal for anyone on your list
  • CONTENTS INCLUDED: 6 pack beer bottle holder with 4.5 inches (114mm) diameter pockets that fit standard cans and 8 to 20-ounce bottles; 4 x 4.5 inch (101.6 x 114mm) front pocket; and detachable 3.5 x 1.3 inch (88.9 x 33mm) stainless steel bottle opener

 

G Francis 6 Pack Cooler Tote Beer Holder with Beer Bottle Opener Keychain – Neoprene Water Bottle Carrier, Beer Bottle Cooler Bag – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

adamztop5

BUILT Neoprene Insulated 6 Pack Carrier

BUILT Six-Pack Soft-Grip Insulated Neoprene Beer Bottle Carrier Tote Tweed Camo 5158526

BUILT Six-Pack Soft-Grip Insulated Neoprene Beer Bottle Carrier Tote Tweed Camo 5158526

More Info

Highlighted Features
  • Stretchy Neoprene Insulation: Made from durable neoprene, this carrier tote keeps up to 6 bottles or cans cool and protected, making it perfect for transporting your favorite craft beers or home brews.
  • Versatile Beverage Transport: Whether you're carrying beer, water, soda, or juice, this tote is designed to keep your drinks upright and safe during transport. Ideal for social gatherings, picnics, tailgating, camping, or a day at the beach.
  • Protection for Fragile Items: Designed to safeguard your drinks, this neoprene tote protects against spills, splashes, bumps, and drops. It's perfect for carrying fragile glass bottles or jars, ensuring they stay safe and secure.
  • Keeps Beverages Cool for Hours: With its insulating properties, the tote keeps your beverages cool for up to 4 hours, making it ideal for outdoor events and gatherings. Enjoy your drinks at the perfect temperature, wherever you are.
  • Soft-Grip Handles: The soft-grip handles provide a comfortable and secure hold, making it easy to carry your beverages wherever you go. The ergonomic design ensures a pleasant carrying experience.

 

BUILT Six-Pack Soft-Grip Insulated Neoprene Beer Bottle Carrier Tote Tweed Camo 5158526 – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Buy a Cannular Home Beer Canning Machine… Get a Free Kegland Ball Lock Keg! + Hands on Review

Cannular Canning Machine

More Info

From the product description, check product page for current description, price and availability:

The KegLand Cannular can seamer is one of the most compact and easy to use benchtop can seamers around. With a single operator you can seam/seal the cans in under 5 seconds meaning this compact machine is suitable for small breweries or brewpubs doing small production runs. The Cannular comes with a die for a size 202 beer can lid.  Additional dies will be available in the future, but for right now, only cans with a size 202 lid can be canned on this machine.

SAFE 24 VOLT POWER (OPTIONAL) If you have ever used a can seamer you would know that you can sometimes spill liquids while processing cans. As a result we have made the Cannular machine with 24v DC so even when you make a mess you don’t have a risk of electrocuting yourself. This also makes the machine easier to clean and wash down. An optional step down transformer plugs into any 110 volt outlet. If you do not purchase this optional transformer, you need to get an Anderson Plug twin wire lead so you can feed power into the Cannular Canning Machine.  Suitable DC power sources besides transformers include cordless drill batteries, and even car batteries.

GO ANYWHERE & EASILY RECYCLED Cans are a fantastic choice for outdoor events, parties, pool events, or at the beach. Broken glass can be dangerous and difficult to clean up completely. Cans on the other hand are the safest choice in this respect.

LIGHT BLOCK  Many beverages especially beer can get damaged quickly due to light. If you expose many beers to sunlight for even 5 minutes the beer can become light damaged (“skunked”). Even softer light such as indoor lights will damage beer over time and noticeable skunking can occur with both incandescent and fluorescent light globes within hours. So unless you keep your glass bottles in the dark all the time you will compromise the beer quality. Aluminium cans solve this problem by blocking 100% of damaging light. Dimensions 14″ depth x 9″ wide x 20″ height.

The Cannular Canning machine comes already adjusted to use the 500ml cans that we sell. If however you use different can sizes or the machine has become out of alignment in shipping you may need to adjust the Cannular.

 

  • Get a Free Keg!  William’s Brewing is letting you pick your own gift.  Choose from 6 options based on your order total.  See coupon codes and thresholds above.  You can pick any gift as long as you’ve reached that order threshold.  No need to add the item to your cart.  It will be automatically added when you use the coupon code.  Grab the details: Choose your own Gift at William’s Brewing  – Use coupon code KEG and you’ll get a free brand new 5 gallon Kegland Keg when you buy a Cannular!
  • No need to add the keg to your cart, just use coupon code KEG and it will be added automatically at checkout.

Cannular Canning Machine

Check sale or product page for current availability & pricing

Also: Hands on Review: Kegland Cannular Bench Top Can Seamer – Homebrew Canner

Shipping is free or reasonably priced flat rate to addresses in the lower 48 states depending on your order size for most items. Price, promotions and availability can change quickly.  Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this this post was published; however, they may differ from those you see when you visit the product page.  Check the product page for current price, description and availability.

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

tag:wmsbuyageta

BUILT Neoprene Insulated 6 Pack Carrier

BUILT NY Six-Pack Insulated Neopreane Beer Bottle Tote, Navy

Neoprene 6 Pack Carrier from Built NY.  Helps keep your beer cold and protects bottles.


From the product description, check product page for current description, price and availability:

  • Insulates six 12-20 ounces cans or bottles up to four hours (time varies depending on external temperatures)
  • Made from neoprene (the wetsuit material)
  • Soft-grip handles
  • Stores flat
  • Stain resistant; machine wash cold, drip dry

BUILT NY Six-Pack Insulated Neoprene Beer Bottle Tote, Navy


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

adamztop5

Rare Deal, Buy a Blichmann Beer Gun Bottle Filler, Get a Free $20 Gift Card + Hands on Review

blichmann engineering beer gun deal

Blichmann Beer Gun Bottle Filler via Adventures in Homebrewing

More Info

From the product description, check product page for current description, price and availability:

Introducing the new and improved Blichmann BeerGun Bottle Filler 2.0! More ergonomic, faster and easier to clean, and even more intuitive!

New Features Include:

  • Accessory Kit #1 now included as a standard item(Shipped From Blichmann with a Ball Lock Fitting, Pin lock Will need to be added as a separate item)
  • Ergonomic warm-touch grip with ambidextrous thumb actuated CO2 valve
  • Positively retained beer seal tip – no more lost tips!
  • Anti-microbial beer hose keeps contamination at bay!
  • Includes a convenient plastic tool case
  • Tool free super fast disassembly

 

  • Blichmann gear is rarely discounted as it is generally under a MAP (minimum advertised pricing agreement).  For the most part, the price is similar no matter where buy it.
  • As of this posting, this combo is selling for $112.13.  This is a bit higher than what I understand MAP to be.  Compare at MoreBeer.
  • Free Gift Card!  As of this posting, Adventures in Homebrewing is giving away a free $20 gift card, with every single purchase of $100 or moreEVERYTHING QUALIFIES.  The one exception is gift cards.  Promotional gift card will be automatically added to your cart.
  • Get Free Shipping: Shipping is free to addresses in the contiguous US.
  • Note that no Blichmann product is directly discounted.  All Blichmann gear is selling for full price.  With this deal, you get a free gift card good toward a future purchase.

Blichmann BeerGun Bpttle Filler with Accessory Kit

Check sale or product page for current availability & pricing

Related Reviews:

Blichmann Engineering Reviews!

More Homebrew Finds!

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

aih

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.  prod:aihbeergun tag:aihfreegc

Pick Up a Cannular Bench Top Can Seamer + Get a Deal on Cans + Hands on Review

Cannular Bench Top Can Seamer CAN100

Cannular Bench Top Can Seamer via MoreBeer

More Info

From the product description, check product page for current description, price and availability:

The Cannular is a manual can seamer that is easy to use, reliable and beautifully simple.

Whether you’re a brewery looking to offer canned beer to go or a homebrewer wanting to keep your creations fresh and fully protected from light, the Cannular is the answer. This bench top unit is one of the most compact and easy to use can seamers you’ll find. The Cannular only requires one person to operate, and each can takes roughly 5 seconds to seam. With a two-person team, one filling and one seaming, the Cannular becomes a suitable option for nano breweries doing small canning production runs.

Operation:
The beauty of the Cannular lies in how truly simple it is to operate. With only three points of operation, it only takes a few minutes to familiarize yourself with the machine. The seaming process is as follows:

Place lid atop the can and place the can on the platform
Turn the platform lever clockwise to raise the can to the seamer
Press the button to turn the machine on and begin spinning the can
Push the seaming lever away from you and hold for 1-2 seconds
Pull the seaming lever towards yourself and hold for 1-2 seconds
Press the button to turn off the machine and stop spinning the can
Turn the platform lever counterclockwise to lower the can
That’s all there is to it!

Construction:
The Cannular was designed to be compact, durable, and safe to operate in a wet environment. The platform assembly is made from 304 grade stainless steel, so no matter how messy your canning gets, there’s no need to worry about rusting or degradation. The body of the unit is made from hammered sheet metal and bolted together with stainless steel screws. Rubber feet help keep the unit from slipping and sliding while in use. Additionally, the Cannular features built-in brackets near the feet so you have the option to mount the machine to your counter or benchtop. The Cannular runs off of 24v DC power via the Anderson socket located on the back. This lower voltage was chosen specifically to make the unit as safe to use in a wet environment as possible.

Power:
As noted above, the Cannular comes with a 24v DC Anderson socket located on the back of the unit. It does not, however, include a cord and plug. When purchasing the unit, you’ll have the option of pairing it with either a power supply with 110v plug, or with a 6 ft. long cord with Anderson plug and alligator clips. The power supply is straight forward, and allows you to plug the unit into a standard 110v power socket. The alligator clips give you the option to power the unit from a battery, and can even be used with an 18v cordless power drill battery. This is certainly the most affordable option for powering the Cannular, and we’ve found that upwards of 200 cans can be seamed on a single battery charge.

Why Cans?
So why can when you can bottle? There’s no doubt that canning has become a more and more popular format for packaging beer among craft breweries over the last several years, and with good reason. Aluminum cans aren’t just more environmentally friendly than bottles, since cans require less energy to transport and recycle, they’re also much better at protecting the quality of the beer. Whereas bottles allow in light, which leads to skunking, aluminum cans offer 100% protection from UV and other wavelengths of light that are harmful to beer. There’s still great debate surrounding whether cans or bottles are better at keeping beer fresh, but if done correctly, cans are theoretically the superior option. When a crown cap is crimped onto a bottle, the lining of the cap can form an imperfect seal on the bottle, allowing small amounts of oxygen in, as well as small amounts of CO2 out. Over time this can result in oxidation of the beer and lost carbonation. Seamed cans, on the other hand, form a much better seal that can prevent these issues. Of course, it’s important to make sure that the can is purged of oxygen before being filled, and that the can lid is sealed atop foam to eliminate oxygen from the headspace. Aside from all the “sciency stuff”, cans are just plain safer. Take your beer backpacking, camping, or poolside and rest assured that broken glass won’t ruin your day!

Specifications:
Power: 250W
Rated Speed: 3300 RPM
Gearbox Ratio: 9.8 : 1
Power Plug: Anderson Type 40A
Can Height: 45-170mm (1.8 – 6.7 inches)*
Can Diameter: 35-75mm (1.4 – 2.9 inches)*
Dimensions: 14″ L x 9″ W x 19.5″ H
Weight: 40 lbs

 

The lowdown…

Cannular Bench Top Can Seamer CAN100

Check sale or product page for current availability & pricing

Price, promotions and availability can change quickly.  Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this this post was published; however, they may differ from those you see when you visit the product page.  Check the product page for current price, description and availability.

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

tag:b3peroff prod:b3cannular

Introducing… Custom, Reusable, Professionally Printed Homebrew Can Labels + Grab a Cannular!

hiomebrew can labels

Introducing Homebrew Can Labels from GrogTag!

More Info

From the product description, check product page for current description, price and availability:

PERSONALIZED BEER CAN LABELS

GrogTag’s custom can labels are professionally printed, high quality labels that elevate any beer can into something special and unique. They are perfect for any occasion, such as a wedding favor or a Father’s Day gift.

QUALITY CUSTOMIZABLE CAN LABELS

Just choose from one of our professional design templates, then add your own text or upload a photo to make it personalized. Don’t be fooled by the name, our customizable can labels are actually quality vinyl stickers that can be put on any smooth surface (like a beer can). So get ready to upgrade your can labels, with GrogTag! Give your homemade wine, beer, cider, mead or kombucha a personalized commercial-grade printed label.

BEER CAN LABEL TEMPLATES

If you are new to GrogTag, we offer a selection of custom products that were created with the home wine, mead, and beer maker in mind. Our customizable can labels are just that – large labels that are the perfect size for your homebrew canning setups. Shop now for a template that best fits your beer, make it custom and personalized, then place your order … it’s that easy!

REUSABLE HOMEBREW CAN LABELS

All of our reusable beer can labels fit great on 12 or 16 ounce cans and are printed on a commercial digital print press, so they will come out looking professional every time. Our vinyl labels are repositionable which means they can peel off and re-stick in case you didn’t get it right the first time. It also means your tags look as good coming out of the ice bucket/water as they do going in. To top it off you’ll get them fast! All of our labels and coasters print and ship within 3 business days.

PROFESSIONAL CAN LABEL DESIGNS FOR PARTY LABELS AND GIFTS

Use one of our templates to quickly create a design perfect for special occasions such as parties, creating personal gifts, or just impressing guests. Our growing selection of templates are flexible, with loads of great color options and styles. Use our professionally designed templates to quickly create custom craft can labels that you can apply at home. Our templates allow you to upload photos, edit text and swap colors. Using our templates is a quick way to ensure a quality looking custom 16oz can label. As always, designing any of our products, like our customized homebrew can labels is free, so enjoy! Join our newsletter and get the inside scoop on upcoming deals and sales and read our blog for more tips to maximize your creativity.


 

Custom Beer Can Labels from GrogTag

grogtag.com coupon

OneBom Stainless Steel Bottler Filler & Cleaning Brush

OneBom Beer Bottle Filler, 14’’ Length Food Grade Stainless Steel,with Filler Brush, Removable Spring Tip, Using 3/8’’ Tubing

Beer Bottle Filler, 14’’ Length Food Grade Stainless Steel,with Filler Brush, Removable Spring Tip, Using 3/8’’ Tubing by OneBom

More Info

From the product description, check product page for current description, price and availability:

  • 2 IN 1 FUNCTION – The nozzle spring can be removed if you prefer the action of a springless bottle filler.
  • WELL MADE – This spring tip beer bottle filler constructed from 304 stainless steel, more durable and longer lifetime than the plastic one. It`s the best choice if you don`t like replace the filler again and again.
  • EASY TO SANITIZE – Thanks to the design of removable spring nozzle,you can easy to clean it , comes with free bottle brush to help you clean.No more having to fiddle with the spigot during bottling, and no more mess from the dripping hose between bottles!
  • SIMPLE TO USE – Attach the 3/8’’ silicone tube to the top side,connect the tubing to the tap of the keg and depress the spring-loaded button foot-valve against the bottom of the bottle or container to start filling.

 

OneBom Beer Bottle Filler, 14’’ Length Food Grade Stainless Steel,with Filler Brush, Removable Spring Tip, Using 3/8’’ Tubing – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link



This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

adamztop5

12 x 740 mL PET Bottles, Caps and Labels by Mr Beer – $18.14 + Free Shipping

Mr. Beer 740ml Deluxe Home Brewing Beer Bottling Set, New, Free Shipping

Mr. Beer 740ml Deluxe Home Brewing Beer Bottling Set.  Includes 12 x 740 mL PET bottles, screw on caps and labels.

As if this posting, this is eBay offering is selling for just $18.14. Shipping is also free to many US addresses.  Prices, shipping and availability can change quickly. Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this post was published; however, they may differ from those you see when you visit the product page. Check the product page for current price, description and availability.

Mr. Beer 740ml Deluxe Home Brewing Beer Bottling Set, New, Free Shipping

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

rp:mrbeerbottles

Yaebrew Stainless Steel Counter Pressure Bottle Filler

YaeBrew Counter Pressure Bottle Filler - Stainless Steel Beer Bottle Filler CO2 Kit Tool Homebrew

YaeBrew Counter Pressure Bottle Filler – Stainless Steel Beer Bottle Filler CO2 Kit Tool Homebrew


From the product description, check product page for current description, price and availability:

  • Hand held counter pressure filler
  • Fill bottles from keg without loosing carbonation
  • Adjustable pressure relief system
  • Material: 304 stainless steel
  • Flush and fill from the bottom of the bottle.

YaeBrew Counter Pressure Bottle Filler – Stainless Steel Beer Bottle Filler CO2 Kit Tool Homebrew – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Compare to: This from MoreBeer – this accomplishes the same basic purpose, however, note it is from a different manufacturer and most likely has different specs


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

adamztop5

Stainless Steel Carbonation Cap for PET Bottles – works on gas AND liquid posts

Carbonation Cap 1-Pack – Stainless Steel CO2 Beer, Soda, Water, Juice Carbonator for Plastic Bottles and Ball Connectors

Carbonation Cap 1-Pack – Stainless Steel


From the product description, check product page for current description, price and availability:

  • Practical: This Carbonation Cap 1-Pack – Stainless Steel CO2 Beer, Soda, Water, Juice Carbonator for Plastic Bottles and Ball Connectors creates an easy and effective beverage carbonation process
  • Versatile: Carbonate beer, soda, water, juice, and even tonic or seltzer water at home; This cap can be attached to standard plastic bottles, gas ball lock connectors, or liquid ball lock connectors
  • Easy to Use: Fill a standard 2-liter bottle with homebrew or water/juice, attach the cap and a CO2 system, and shake
  • Durable: Constructed from stainless steel for strength and longevity
  • Contents: Package includes (1) Carbonation Cap; Requires gas line assembly, CO2 tank, and regulator (not included)

PET Bottles as Growlers: These are generally intended to convert 1L and 2L bottles to growlers.  Fill up a 1L or 2L PET bottle with your favorite homebrew.  Put one of these on (purge the headspace by squeezing if you want to) and then pressurize for transport.  This should help to reduce oxygen pickup and maintain carbonation levels.

Fine tune or rapidly carbonate beer: You can also use this cap to rapidly carbonate beer.  Same process as for transport, just set your regulator to the proper pressure and shake or agitate the PET bottle to help introduce CO2.  Or hook it up to CO2 and let it sit in you kegerator.

Carbonation Cap 1-Pack – Stainless Steel CO2 Beer, Soda, Water, Juice Carbonator for Plastic Bottles and Ball Connectors – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

adamztop5

Cannular Bench Top Can Seamer – $381.65 via MoreBeer’s Cyber Monday Sale + Hands on Review

Cannular Bench Top Can Seamer CAN100

Cannular Bench Top Can Seamer via MoreBeer

More Info

From the product description, check product page for current description, price and availability:

The Cannular is a manual can seamer that is easy to use, reliable and beautifully simple.

Whether you’re a brewery looking to offer canned beer to go or a homebrewer wanting to keep your creations fresh and fully protected from light, the Cannular is the answer. This bench top unit is one of the most compact and easy to use can seamers you’ll find. The Cannular only requires one person to operate, and each can takes roughly 5 seconds to seam. With a two-person team, one filling and one seaming, the Cannular becomes a suitable option for nano breweries doing small canning production runs.

Operation:
The beauty of the Cannular lies in how truly simple it is to operate. With only three points of operation, it only takes a few minutes to familiarize yourself with the machine. The seaming process is as follows:

Place lid atop the can and place the can on the platform
Turn the platform lever clockwise to raise the can to the seamer
Press the button to turn the machine on and begin spinning the can
Push the seaming lever away from you and hold for 1-2 seconds
Pull the seaming lever towards yourself and hold for 1-2 seconds
Press the button to turn off the machine and stop spinning the can
Turn the platform lever counterclockwise to lower the can
That’s all there is to it!

Construction:
The Cannular was designed to be compact, durable, and safe to operate in a wet environment. The platform assembly is made from 304 grade stainless steel, so no matter how messy your canning gets, there’s no need to worry about rusting or degradation. The body of the unit is made from hammered sheet metal and bolted together with stainless steel screws. Rubber feet help keep the unit from slipping and sliding while in use. Additionally, the Cannular features built-in brackets near the feet so you have the option to mount the machine to your counter or benchtop. The Cannular runs off of 24v DC power via the Anderson socket located on the back. This lower voltage was chosen specifically to make the unit as safe to use in a wet environment as possible.

Power:
As noted above, the Cannular comes with a 24v DC Anderson socket located on the back of the unit. It does not, however, include a cord and plug. When purchasing the unit, you’ll have the option of pairing it with either a power supply with 110v plug, or with a 6 ft. long cord with Anderson plug and alligator clips. The power supply is straight forward, and allows you to plug the unit into a standard 110v power socket. The alligator clips give you the option to power the unit from a battery, and can even be used with an 18v cordless power drill battery. This is certainly the most affordable option for powering the Cannular, and we’ve found that upwards of 200 cans can be seamed on a single battery charge.

Why Cans?
So why can when you can bottle? There’s no doubt that canning has become a more and more popular format for packaging beer among craft breweries over the last several years, and with good reason. Aluminum cans aren’t just more environmentally friendly than bottles, since cans require less energy to transport and recycle, they’re also much better at protecting the quality of the beer. Whereas bottles allow in light, which leads to skunking, aluminum cans offer 100% protection from UV and other wavelengths of light that are harmful to beer. There’s still great debate surrounding whether cans or bottles are better at keeping beer fresh, but if done correctly, cans are theoretically the superior option. When a crown cap is crimped onto a bottle, the lining of the cap can form an imperfect seal on the bottle, allowing small amounts of oxygen in, as well as small amounts of CO2 out. Over time this can result in oxidation of the beer and lost carbonation. Seamed cans, on the other hand, form a much better seal that can prevent these issues. Of course, it’s important to make sure that the can is purged of oxygen before being filled, and that the can lid is sealed atop foam to eliminate oxygen from the headspace. Aside from all the “sciency stuff”, cans are just plain safer. Take your beer backpacking, camping, or poolside and rest assured that broken glass won’t ruin your day!

Specifications:
Power: 250W
Rated Speed: 3300 RPM
Gearbox Ratio: 9.8 : 1
Power Plug: Anderson Type 40A
Can Height: 45-170mm (1.8 – 6.7 inches)*
Can Diameter: 35-75mm (1.4 – 2.9 inches)*
Dimensions: 14″ L x 9″ W x 19.5″ H
Weight: 40 lbs

 

Cyber Monday Sale!  MoreBeer’s Cyber Monday Sale is live!  Shipping for most items will be free, with a $59 order to addresses in the contiguous US and their Free Shipping Program.  This is included in the mix and marked down to just $381.65 when you use coupon code CYBERSANTA

Check sale or product page for current availability & pricing

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

prod:b3cannular

King Crimp Capping Gauge – Are you Getting a Good Crimp?

King Crimp Cap Gauge.

More Info

From the product description, check product page for current description, price and availability:

  • STAINLESS STEEL CROWN GAUGE for Breweries & Home Brewer kits. Check your capped beer for proper crimping, and prevent spoiled beer.
  • MANUFACTURED TO EXACT SPECIFICATIONS suggested by bottle cap manufacturers. Precise holes (1.120 in, 1.125 in, 1.130 in, 1.135 in) needed for testing crimped crowns (caps) on 26mm bottles
  • EASY TO USE GO/NO-GO GAUGE – The two center holes (marked”GO”) represent the lower and higher allowable tolerance for a properly crimped 26mm bottle. The two outer holes (marked “NO-GO”) represent crimped crowns either too small, or too big for the 26mm bottle.
  • VITAL FOR QUALITY CONTROL – increase brew quality and shelf life by ensuring proper capping of your 26mm crowns

 

Use to double check your capped homebrew for proper crimping.

What are others saying?  Search this product’s Amazon reviews for “homebrew” – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Crown Gauge for 26 mm Beer Bottles – a Go/No-Go Gauge for Testing Crowns and Crimpers. Breweries, Brewmasters and Home Brewers can Increase Quality Control for Beer, Wine or Kombucha Bottling – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Cannular Home Beer Canning Machine + Transformer! – Save $50 + Hands on Review

Cannular Canning Machine

More Info

From the product description, check product page for current description, price and availability:

The KegLand Cannular can seamer is one of the most compact and easy to use benchtop can seamers around. With a single operator you can seam/seal the cans in under 5 seconds meaning this compact machine is suitable for small breweries or brewpubs doing small production runs. The Cannular comes with a die for a size 202 beer can lid.  Additional dies will be available in the future, but for right now, only cans with a size 202 lid can be canned on this machine.

SAFE 24 VOLT POWER (OPTIONAL) If you have ever used a can seamer you would know that you can sometimes spill liquids while processing cans. As a result we have made the Cannular machine with 24v DC so even when you make a mess you don’t have a risk of electrocuting yourself. This also makes the machine easier to clean and wash down. An optional step down transformer plugs into any 110 volt outlet. If you do not purchase this optional transformer, you need to get an Anderson Plug twin wire lead so you can feed power into the Cannular Canning Machine.  Suitable DC power sources besides transformers include cordless drill batteries, and even car batteries.

GO ANYWHERE & EASILY RECYCLED Cans are a fantastic choice for outdoor events, parties, pool events, or at the beach. Broken glass can be dangerous and difficult to clean up completely. Cans on the other hand are the safest choice in this respect.

LIGHT BLOCK  Many beverages especially beer can get damaged quickly due to light. If you expose many beers to sunlight for even 5 minutes the beer can become light damaged (“skunked”). Even softer light such as indoor lights will damage beer over time and noticeable skunking can occur with both incandescent and fluorescent light globes within hours. So unless you keep your glass bottles in the dark all the time you will compromise the beer quality. Aluminium cans solve this problem by blocking 100% of damaging light. Dimensions 14″ depth x 9″ wide x 20″ height.

The Cannular Canning machine comes already adjusted to use the 500ml cans that we sell. If however you use different can sizes or the machine has become out of alignment in shipping you may need to adjust the Cannular.

 

As of this posting, William’s Brewing has these for $449.99.  Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this post was published; however, they may differ from those you see when you visit the product page.  Check the product page for current price, description and availability

$50 Off: As of this posting, William’s Brewing is discounting most orders by up to $50 based on order total as part of their 40th Anniversary Sale.  Coupon codes are available for each discount level.  Check William’s Brewing for current availability and details.

  • 10SAVE takes $10 off orders of $99.99
  • 20SAVE takes $20 off orders of $199.99
  • 30SAVE takes $30 off orders of $299.99
  • 40SAVE takes $40 off orders of $399.99
  • 50SAVE takes $50 off orders of $499.99

Add on a transformer (you need either that or the power cord clips to use with a battery) and you’ll qualify for the full $50 off when you use coupon code 50SAVE

Cannular Canning Machine

Also: Hands on Review: Kegland Cannular Bench Top Can Seamer – Homebrew Canner

Check sale or product page for current availability & pricing


This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Cannular Bench Top Can Seamer via MoreBeer – $382.49!, Save $67.50 + Hands on Review

Cannular Bench Top Can Seamer CAN100

Cannular Bench Top Can Seamer via MoreBeer

More Info

From the product description, check product page for current description, price and availability:

The Cannular is a manual can seamer that is easy to use, reliable and beautifully simple.

Whether you’re a brewery looking to offer canned beer to go or a homebrewer wanting to keep your creations fresh and fully protected from light, the Cannular is the answer. This bench top unit is one of the most compact and easy to use can seamers you’ll find. The Cannular only requires one person to operate, and each can takes roughly 5 seconds to seam. With a two-person team, one filling and one seaming, the Cannular becomes a suitable option for nano breweries doing small canning production runs.

Operation:
The beauty of the Cannular lies in how truly simple it is to operate. With only three points of operation, it only takes a few minutes to familiarize yourself with the machine. The seaming process is as follows:

Place lid atop the can and place the can on the platform
Turn the platform lever clockwise to raise the can to the seamer
Press the button to turn the machine on and begin spinning the can
Push the seaming lever away from you and hold for 1-2 seconds
Pull the seaming lever towards yourself and hold for 1-2 seconds
Press the button to turn off the machine and stop spinning the can
Turn the platform lever counterclockwise to lower the can
That’s all there is to it!

Construction:
The Cannular was designed to be compact, durable, and safe to operate in a wet environment. The platform assembly is made from 304 grade stainless steel, so no matter how messy your canning gets, there’s no need to worry about rusting or degradation. The body of the unit is made from hammered sheet metal and bolted together with stainless steel screws. Rubber feet help keep the unit from slipping and sliding while in use. Additionally, the Cannular features built-in brackets near the feet so you have the option to mount the machine to your counter or benchtop. The Cannular runs off of 24v DC power via the Anderson socket located on the back. This lower voltage was chosen specifically to make the unit as safe to use in a wet environment as possible.

Power:
As noted above, the Cannular comes with a 24v DC Anderson socket located on the back of the unit. It does not, however, include a cord and plug. When purchasing the unit, you’ll have the option of pairing it with either a power supply with 110v plug, or with a 6 ft. long cord with Anderson plug and alligator clips. The power supply is straight forward, and allows you to plug the unit into a standard 110v power socket. The alligator clips give you the option to power the unit from a battery, and can even be used with an 18v cordless power drill battery. This is certainly the most affordable option for powering the Cannular, and we’ve found that upwards of 200 cans can be seamed on a single battery charge.

Why Cans?
So why can when you can bottle? There’s no doubt that canning has become a more and more popular format for packaging beer among craft breweries over the last several years, and with good reason. Aluminum cans aren’t just more environmentally friendly than bottles, since cans require less energy to transport and recycle, they’re also much better at protecting the quality of the beer. Whereas bottles allow in light, which leads to skunking, aluminum cans offer 100% protection from UV and other wavelengths of light that are harmful to beer. There’s still great debate surrounding whether cans or bottles are better at keeping beer fresh, but if done correctly, cans are theoretically the superior option. When a crown cap is crimped onto a bottle, the lining of the cap can form an imperfect seal on the bottle, allowing small amounts of oxygen in, as well as small amounts of CO2 out. Over time this can result in oxidation of the beer and lost carbonation. Seamed cans, on the other hand, form a much better seal that can prevent these issues. Of course, it’s important to make sure that the can is purged of oxygen before being filled, and that the can lid is sealed atop foam to eliminate oxygen from the headspace. Aside from all the “sciency stuff”, cans are just plain safer. Take your beer backpacking, camping, or poolside and rest assured that broken glass won’t ruin your day!

Specifications:
Power: 250W
Rated Speed: 3300 RPM
Gearbox Ratio: 9.8 : 1
Power Plug: Anderson Type 40A
Can Height: 45-170mm (1.8 – 6.7 inches)*
Can Diameter: 35-75mm (1.4 – 2.9 inches)*
Dimensions: 14″ L x 9″ W x 19.5″ H
Weight: 40 lbs

 

Black Friday!  MoreBeer’s Black Friday Sale is live!  They are discounting over 150 products by up to 50%.  They are also doing some special limited availability Daily Deals.  Shipping for most items will be free, with a $59 order to addresses in the contiguous US and their Free Shipping Program.  This is included in the mix and marked down to just $382.49.

Check sale or product page for current availability & pricing

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

prod:b3cannular

Cannular Bench Top Can Seamer via MoreBeer! + Get a Deal on Cans + Hands on Review

Cannular Bench Top Can Seamer CAN100

Cannular Bench Top Can Seamer via MoreBeer

More Info

From the product description, check product page for current description, price and availability:

The Cannular is a manual can seamer that is easy to use, reliable and beautifully simple.

Whether you’re a brewery looking to offer canned beer to go or a homebrewer wanting to keep your creations fresh and fully protected from light, the Cannular is the answer. This bench top unit is one of the most compact and easy to use can seamers you’ll find. The Cannular only requires one person to operate, and each can takes roughly 5 seconds to seam. With a two-person team, one filling and one seaming, the Cannular becomes a suitable option for nano breweries doing small canning production runs.

Operation:
The beauty of the Cannular lies in how truly simple it is to operate. With only three points of operation, it only takes a few minutes to familiarize yourself with the machine. The seaming process is as follows:

Place lid atop the can and place the can on the platform
Turn the platform lever clockwise to raise the can to the seamer
Press the button to turn the machine on and begin spinning the can
Push the seaming lever away from you and hold for 1-2 seconds
Pull the seaming lever towards yourself and hold for 1-2 seconds
Press the button to turn off the machine and stop spinning the can
Turn the platform lever counterclockwise to lower the can
That’s all there is to it!

Construction:
The Cannular was designed to be compact, durable, and safe to operate in a wet environment. The platform assembly is made from 304 grade stainless steel, so no matter how messy your canning gets, there’s no need to worry about rusting or degradation. The body of the unit is made from hammered sheet metal and bolted together with stainless steel screws. Rubber feet help keep the unit from slipping and sliding while in use. Additionally, the Cannular features built-in brackets near the feet so you have the option to mount the machine to your counter or benchtop. The Cannular runs off of 24v DC power via the Anderson socket located on the back. This lower voltage was chosen specifically to make the unit as safe to use in a wet environment as possible.

Power:
As noted above, the Cannular comes with a 24v DC Anderson socket located on the back of the unit. It does not, however, include a cord and plug. When purchasing the unit, you’ll have the option of pairing it with either a power supply with 110v plug, or with a 6 ft. long cord with Anderson plug and alligator clips. The power supply is straight forward, and allows you to plug the unit into a standard 110v power socket. The alligator clips give you the option to power the unit from a battery, and can even be used with an 18v cordless power drill battery. This is certainly the most affordable option for powering the Cannular, and we’ve found that upwards of 200 cans can be seamed on a single battery charge.

Why Cans?
So why can when you can bottle? There’s no doubt that canning has become a more and more popular format for packaging beer among craft breweries over the last several years, and with good reason. Aluminum cans aren’t just more environmentally friendly than bottles, since cans require less energy to transport and recycle, they’re also much better at protecting the quality of the beer. Whereas bottles allow in light, which leads to skunking, aluminum cans offer 100% protection from UV and other wavelengths of light that are harmful to beer. There’s still great debate surrounding whether cans or bottles are better at keeping beer fresh, but if done correctly, cans are theoretically the superior option. When a crown cap is crimped onto a bottle, the lining of the cap can form an imperfect seal on the bottle, allowing small amounts of oxygen in, as well as small amounts of CO2 out. Over time this can result in oxidation of the beer and lost carbonation. Seamed cans, on the other hand, form a much better seal that can prevent these issues. Of course, it’s important to make sure that the can is purged of oxygen before being filled, and that the can lid is sealed atop foam to eliminate oxygen from the headspace. Aside from all the “sciency stuff”, cans are just plain safer. Take your beer backpacking, camping, or poolside and rest assured that broken glass won’t ruin your day!

Specifications:
Power: 250W
Rated Speed: 3300 RPM
Gearbox Ratio: 9.8 : 1
Power Plug: Anderson Type 40A
Can Height: 45-170mm (1.8 – 6.7 inches)*
Can Diameter: 35-75mm (1.4 – 2.9 inches)*
Dimensions: 14″ L x 9″ W x 19.5″ H
Weight: 40 lbs

 

As of this posting, MoreBeer has this for just $449.99. Maybe that seems expensive, but when it comes to can seamers, in my opinion, it’s a bargain.  Shipping is free with a qualifying $59 order to many US addresses. Price, promotions and availability can change quickly.  Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this this post was published; however, they may differ from those you see when you visit the product page.  Check the product page for current price, description and availability.

Cannular Bench Top Can Seamer CAN100

Deal on Cans!  For a short time, MoreBeer is taking 15% off nearly everything, site wide when you use coupon code BC15.  There are a few exceptions.  Shipping is also free to most US addresses with a qualifying $59 order.  15% Off at MoreBeer!  – remember promo code BC15.  This does not work on the Cannular, however it does work on cases of 207 new 16 ounce cans making them $84.99 with free shipping.

Also: Hands on Review: Kegland Cannular Bench Top Can Seamer – Homebrew Canner

Check sale or product page for current availability & pricing

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

tag:b3peroff prod:b3cannular