Updated: February 18, 2025

This review is by Homebrew Finds Contributor Brad Probert.  Brad is an engineer, expert homebrewer and experienced reviewer.  Grab a link to Brad’s website at the end of this review.

Kegland Cannular Can Seamer

It’s been a long road for craft beer to be accepted in cans and not bottles. But it has been well established that cans are OK, too, and some take it even further to tout cans as a superior storage vessel for beer. I’ll avoid a full-blown comparison of the pros & cons of each, but I do feel it worth noting a couple of the selling points cans have. One is the claim that cans provide better storage with a more oxygen-proof seal than bottle caps, and 100% light blocking versus even brown colored glass. There is probably lots of debate on those two topics, but one benefit that is universally recognized is transportability. Cans are lighter and more compact, a whole lot less fragile, and you can take them to beaches and pools where glass containers are banned.

On the homebrew scale, until recently, the canners available have either been hand-crank monstrosities that look like an exhibit from a museum on the industrial revolution, or electrically driven units that look like steampunk movie props and cost a couple thousand dollars. Then in 2019, KegLand from Australia started exporting their Cannular can seamer that sells for $525 for the unit + power supply and is electrically powered. This changed the landscape significantly in the homebrew world, making canning much more within reach.

Compare Prices, Review Continues Below:

• Cannular Canning Machine – via William’s Brewing – search Cannular
• Cannular Bench Top Can Seamer CAN100 – via MoreBeer – search Cannular
• All Cannular models and options at MoreBeer
• Kegland Cannular Pro – via Amazon – search Cannular
• Also: Cannular Pro Semi-Auto Bench Top Can Seamer

Related Reviews:

• Hands on Review: Kegland Cannular Can and Bottle Filler!
  • Cannular Can and Bottle Filler | WiFi Enabled | RAPT Portal Compatible | Programmable Fill Profiles | Automatic CO2 Purge CAN250 via MoreBeer
  • Cannular Can and Bottle Filler + 24V DC Power Supply via William’s Brewing
• Hands on Review Nukatap Counter Pressure Bottle Filler!
• Hands on Review: Tapcooler Counter Pressure Bottle Filler for Forward Sealing Faucets
• Hands on Review DuoTights & EVABarrier

Empty CanLid on Foam

The Cannular operates with a combination of manual lever pulling and electric motor spinning. You start the process out with an empty aluminum can with no top on it. You sanitize the can, fill it with beer, and then take a sanitized lid and set it down on top of the can (ideally on foam, to ensure minimization of air in your canned product). From there, it gets placed on a small pedestal and a lever turn raises the can up into the machinery of the can seaming operation and locks it at that height. The push of a button gets the motor spinning and the can on its platform starts spinning around. Grabbing a different lever, you push back and hold it for a couple seconds, then pull it toward you for a couple seconds, and you’re done. Turn off the motor, lower your can back down on the pedestal, and you’ve canned one beer.

Continue reading →