The BlowTie is a pretty amazing Spunding Valve solution. Check out my Hands on Review
A Spunding Valve allows you to ferment under pressure, naturally and precisely carbonate in the keg, fix over-carbonated beers and lots more. See: Build a Spunding Valve – for loads of information on building and using a Spunding Valve.
This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
Ss Brewtech Sspunding Valve – Scaled (Up to 3BBL) via MoreBeer
More Info
From the product description, check product page for current description, price and availability:
The Sspunding Valve from Ss Brewtech allows you dial in the precise pressure at which you want your Unitank fermenting. A spunding valve is essentially an adjustable pressure relief valve. Normal PRVs that are found on kegs, couplers and come stock on Ss Unitanks, operate as safety features that will release pressure when it’s nearing dangerous levels. Spunding valves, on the other hand, allow you to set the release pressure much lower. Simply dial in your desired fermentation pressure, and the Sspunding valve will release excess pressure when it gets too high.
The scaled Sspunding valve includes an etched sleeve with a scale between 0-2 BAR, along with a pressure calibrated spring. This version is perfect for a home or nano brewer that wants to be able to dial in pressures on the fly without having to match the release pressure using a gauge. The scaled version also features a pressure release knob to quickly and easily verify or equalize tank pressure. If you’re looking for a more affordable option, check out FE892A for the non-scaled version.
The polycarbonate cup is designed to hold sanitizer so that the tank remains 100% sanitary throughout the course of the fermentation process.
You can pair the spunding valve with a 1.5″ tri-clamp tee (H666) and 90-degree elbow (H667), which enables the unit to be installed on the Unitank’s blow off arm, as shown in the photo.
All 304 Stainless Construction
Only for use with pressure rated Unitanks
1.5″ TC interface
Removable sanitizer cup
Easy disassembly for cleaning
Not for use on low pressure vessels (Chronicals, etc.)
For Your Safety: Always leave the fixed-pressure PRV included with the Unitank in place. Never exceed the maximum rated working pressure of the vessel at any time during operation.
Spunding Valve Applications
Pressurized fermentation. Ferment in a 5 or 10 gallon corny keg and use your Spunding Valve instead of an airlock. This allows you to ferment at your desired pressure.
Dry hop under pressure. This allows you to dry hop earlier while reducing oxygenation. Active yeast are more likely to metabolize oxygen that’s introduced during dry hopping during active fermentation. Since CO2 is not exiting beer as vigorously under pressure, wanted compounds, flavors and aromas are more likely to stay in your beer under pressure.
Naturally and accurately carbonate beer right in the keg.
An airlock replacement. Keep the valve wide open for non-pressurized fermentations. Only do this if you have plenty of head space. This wouldn’t make a great blow off tube.
Keg to keg transfers. Use the Spunding Valve to allow excess gas to exit the receiving keg as you transfer under pressure. Helps you achieve a slow, controlled and pressurized transfer.
Fix over-carbonated beers. Use the same general process as for carbonation (skipping the addition of fermentable sugar). Use a carbonation chart to determine proper pressure for the temperature the keg is at. The Spunding Valve allows excess pressure to vent until the new carbonation level is achieved. You can agitate the keg to fix carbonation more quickly.
Test for keg leaks. Pressurize your keg to serving pressure. Put the Spunding Valve on (with the pressure set well above your serving PSI) and note the reading. The gauge should remain steady. If pressure drops, you know you have a keg leak. It’s worth noting that this checks the entire keg including gas body o-ring. That spot is hard to check and other way as it’s only in function when the gas QD is on. When the gas QD is on… it’s difficult to spray and check for bubbles underneath the gas QD. Thanks to Scott Janish for this tip!
As an airlock for long term aging of beers. Airlocks can run dry over time. A Spunding Valve will not.
A Spunding Valve allows you to ferment under pressure, naturally and precisely carbonate in the keg, fix over-carbonated beers and lots more. See: Build a Spunding Valve – for loads of information on building and using a Spunding Valve.
As of this posting, MoreBeer has this on sale for $109.99, That’s a $39.96 savings. Shipping is free with a qualifying $59 order to many US addresses. Price, promotions and availability can change quickly. Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this this post was published; however, they may differ from those you see when you visit the product page. Check the product page for current price, description and availability.
This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
Jansamn Carbonation Lid,Carbonation Keg Lid for Cornelius Corny Kegs, Home Brew Keg Lid With 20″ Silicon Tube & 2 Micron Keg Diffusion Stone (Universal Lid)
More Info
From the product description, check product page for current description, price and availability:
【Well Made & Great Quality 】Keg lid and diffusion stone is made from 304 stainless steel. keg lid valve is plastic. 20 Inch Tube is food grade silicone
【 A Standard Carbonation Lid 】 Fits cornelius (corny) kegs and similar standard homebrew kegs. Our keg lid is the standard oval lid
【 Come With 20 Inch Tube & 2 Micron Diffusion Stone 】 Tube can attach to the dip tube.Take 2 micron diffusion stone insert into hose on the other side. Finally getting the lid into the keg to carbonate your beer
【MULTIPURPOSE】 – Carbonate beer, soda, water, juice, and even tonic or seltzer water at home; Can be used for carbonation or as a replacement for your current, worn out keg lid
【 How To Check Leaks Or Not 】 After injecting some CO2 in your keg, you can sprayed down the lid area with sanitizer to check for any leaks. You will see no bubbles, proving our keg lid is no leaks
Compare: at MoreBeer – similar function but not identical
The integrated post on this lid is ball lock, but the lid itself should work on all standard ball lock and pin lock kegs.
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
Gekufa Beer Carbonating Stone, 2 Micron Diffusion Air Stone, Stainless Steel Aeration Stone for Homebrew Beer Wine Soda Brewing, Carbonation Stone 2 Micron
More Info
From the product description, check product page for current description, price and availability:
[Premium Quality] Constructed of food grade material with 304 stainless steel 1/4″ barb to ensure durability, no rust or leak.
[Easy to Use] Easily attaches to plastic bottles, gas (grey) ball lock connectors, or liquid (black) ball lock connectors.
[Lightweight & Portable] The carbonation stone is lightweight, makes it more portable than traditional carbonation system.
[High Efficacy] With the help of aeration stone, your beverage can be carbonating easily and is available to drink almost immediately.
[Various Usage] Carbonation caps can carbonate multiple beverages, including beer, soda, wine and juice.
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
Brewer’s Best Conditioning Tablets 250 Count (approximate)
More Info
From the product description, check product page for current description, price and availability:
Brewer’s best conditioning tablets
Add 3 to 5 tablets per 12 oz bottle
250 count
This unique priming sugar is in tablet format and is made from dextrose, dry malt extract, and heading powder. To use, add 3 to 5 tablets per 12 oz. bottle depending on desired carbonation level, and condition for 1 week. Each 4.5 ounce pack contains approximately 250 tablets.
These take the place of traditional priming sugar. Carbonation tabs are also handy if you keg, but still want to naturally carbonate a few bottled beers. In that scenario, you would keg the majority of your beer and bottle portion of the batch adding these to each bottle so that you can skip a bottling bucket and traditional priming sugar.
Brewer’s Best Conditioning Tablets 250 Count – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
Beverage Factory BLL-N-AUS Replacement Lid for Home brew Keg
From the product description, check product page for current description, price and availability:
This is a universal replacement lid for home brew/soda kegs. BRAND new lid comes with closure O-Ring pressure release Valve with sturdy 1 inch metal ring to relieve pressure out of your keg.
One difference between Pin Lock and Ball Lock kegs is the type of lids that come with each. Ball Locks, generally, have a manual PRV valve, while Pin Locks do not. Ball Lock style lids are, in my opinion, superior because the manual PRV allows you to easily vent your keg as needed. The good news is that, for standard kegs, the lids are the same size and can be interchanged. That means you can use a Ball Lock style lid in a Pin Lock Keg. See: What’s the Difference Between Ball Lock Kegs and Pin Lock Kegs?
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
Jansamn Carbonation Lid,Carbonation Keg Lid for Cornelius Corny Kegs, Home Brew Keg Lid With 20″ Silicon Tube & 2 Micron Keg Diffusion Stone (Universal Lid)
More Info
From the product description, check product page for current description, price and availability:
【Well Made & Great Quality 】Keg lid and diffusion stone is made from 304 stainless steel. keg lid valve is plastic. 20 Inch Tube is food grade silicone
【 A Standard Carbonation Lid 】 Fits cornelius (corny) kegs and similar standard homebrew kegs. Our keg lid is the standard oval lid
【 Come With 20 Inch Tube & 2 Micron Diffusion Stone 】 Tube can attach to the dip tube.Take 2 micron diffusion stone insert into hose on the other side. Finally getting the lid into the keg to carbonate your beer
【MULTIPURPOSE】 – Carbonate beer, soda, water, juice, and even tonic or seltzer water at home; Can be used for carbonation or as a replacement for your current, worn out keg lid
【 How To Check Leaks Or Not 】 After injecting some CO2 in your keg, you can sprayed down the lid area with sanitizer to check for any leaks. You will see no bubbles, proving our keg lid is no leaks
Compare: at MoreBeer – similar function but not identical
The integrated post on this lid is ball lock, but the lid itself should work on all standard ball lock and pin lock kegs.
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
Gekufa Beer Carbonating Stone, 2 Micron Diffusion Air Stone, Stainless Steel Aeration Stone for Homebrew Beer Wine Soda Brewing, Carbonation Stone 2 Micron
More Info
From the product description, check product page for current description, price and availability:
[Premium Quality] Constructed of food grade material with 304 stainless steel 1/4″ barb to ensure durability, no rust or leak.
[Easy to Use] Easily attaches to plastic bottles, gas (grey) ball lock connectors, or liquid (black) ball lock connectors.
[Lightweight & Portable] The carbonation stone is lightweight, makes it more portable than traditional carbonation system.
[High Efficacy] With the help of aeration stone, your beverage can be carbonating easily and is available to drink almost immediately.
[Various Usage] Carbonation caps can carbonate multiple beverages, including beer, soda, wine and juice.
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
The BlowTie is a pretty amazing Spunding Valve solution. Check out my Hands on Review
A Spunding Valve allows you to ferment under pressure, naturally and precisely carbonate in the keg, fix over-carbonated beers and lots more. See: Build a Spunding Valve – for loads of information on building and using a Spunding Valve.
Save 15%! For a short time, MoreBeer is taking 15% off nearly everything, site wide when you use coupon code FLASH15. There are a few exceptions. Shipping is also free to most US addresses with a qualifying $59 order.
Check sale or product page for current availability & pricing
pinned
This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
From the product description, check product page for current description, price and availability:
A small barbed regulator for use with liquid or gas
Made from acetyl, nitrile, brass and stainless steel parts
Controls pressure from 0 – 150 psi
Includes 3/16 inch
Notes from HBF: This is an inline secondary regulator. You still need a primary regulator attached to your CO2 tank. The idea is, you set the primary to the highest pressure you will use (without exceeding specifications of any component of your system) and then use these regulators inline (one per line) to fine tune pressure and carbonation [See: Balancing Your Draft System]. As an example, you could set your primary to 25 PSI for faster force carbonation and set each line to a different pressure based on desired carbonation level. Since this does not have a gauge, you need some sort of a gauge to use for tuning this in. The gauge doesn’t have to stay connected, just while you’re setting the regulator. This is a perfect application of a Spunding Valve [See: Build a Spunding Valve! – How and Why]
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
From the product description, check product page for current description, price and availability:
An ideal solution if you want to serve different beers at different gas pressures. In a typical multiple line, multiple pressure system you would run a gas line from you main regulator into a secondary regulator where you would set different pressures. While that is ideal it is a little pricey. This little sweetheart lets you set different pressures at a far lower cost. What we do is set the main regulator at the highest pressure we want in the system – for example a keg of soda that you want to carbonate and serve at 25 psi. Run the gas line into a manifold and then install one of these after the manifold on each line where you want to decrease the pressure, for example lowering to 10psi to serve your British pale ale and 14 psi to serve your summertime lawnmower lager.
While this unit does not have a pressure gauge you can use an adjustable relief valve/spunding valve on your keg to tell the pressure. Pressure adjusments can be made with a screwdriver.
The maximum inlet pressure is 150 psi. Made from non corrosive acetyl, nitrile, and stainless parts. The regulator comes with two brass barbs to fit 3/16″ tubing on. Alternatively, you can remove the barbs and use 1/4″ tubing directly on the regulator. The aluminum manifolds linked above feature 1/4″ barbed outlets and are a good match with this regulator.
Works with 0 – 150 psi
Works with both gas and liquid
Comes with two brass barbs
Has two mounting points
Made from non corrosive acetyl, nitrile, and stainless parts
Notes from HBF: This is an inline secondary regulator. You still need a primary regulator attached to your CO2 tank. The idea is, you set the primary to the highest pressure you will use (without exceeding specifications of any component of your system) and then use these regulators inline (one per line) to fine tune pressure and carbonation [See: Balancing Your Draft System]. As an example, you could set your primary to 25 PSI for faster force carbonation and set each line to a different pressure based on desired carbonation level. Since this does not have a gauge, you need some sort of a gauge to use for tuning this in. The gauge doesn’t have to stay connected, just while you’re setting the regulator. This is a perfect application of a Spunding Valve [See: Build a Spunding Valve! – How and Why]
As of this posting, MoreBeer has this on sale for just $8.99. Shipping is free with a qualifying $59 order to many US addresses. Price, promotions and availability can change quickly. Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this this post was published; however, they may differ from those you see when you visit the product page. Check the product page for current price, description and availability.
This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
BlowTie v2 w/Gauge that has been updated to digital, see below for walk through of that process.
Updated: 5/15/2024
A Spunding Valve allows you to maintain a set pressure. If pressure in the vessel exceeds the set point, it is expelled. It generally consists of an adjustable PRV valve, a tee, a gauge and a way to connect to your keg.
Why a Spunding Valve?
There are loads of homebrew related applications for a Spunding valve ranging from pressurized fermentation to naturally carbonating to fixing over carbonated beers and lots more. Check out our resource post on the subject. It’s arguably the go-to resource on the Internet on the subject
BowTie v1 Assembly
BlowTie v1 & v2!
This review covers both the original v1 Kegland v1 BlowTie & v2. Both are DuoTight compatible. The biggest difference is v2 has an integrated gauge, where v1 required an add-on gauge.
BlowTie v1 assembly that has been updated to digital, see below for walk through of that process.
But first, more about DuoTight!
Kegland’s DuoTight Fittings are designed to work with EVABarrier Double Wall Tubing. They offer quick, reliable connections, easy implementation, a variety of fitting options and feature amazing versatility. They’re also, generally speaking, very well priced. DuoTights are push to connect fittings and require no tubing clamps.
The BlowTie Spunding Valve assembly consists of the BlowTie, a DuoTight Tee Fitting, a DuoTight to flare fitting, a DuoTight pressure gauge and two small pieces of EVABarrier Tubing.
The BlowTie is the heart of this build. It has DuoTight Push to Connect connections on both side as well as an adjustment knob to set pressure. Related: DuoTight Hands on Review. Continue reading →
From the product description, check product page for current description, price and availability:
A small barbed regulator for use with liquid or gas
Made from acetyl, nitrile, brass and stainless steel parts
Controls pressure from 0 – 150 psi
Includes 3/16 inch
Notes from HBF: This is an inline secondary regulator. You still need a primary regulator attached to your CO2 tank. The idea is, you set the primary to the highest pressure you will use (without exceeding specifications of any component of your system) and then use these regulators inline (one per line) to fine tune pressure and carbonation [See: Balancing Your Draft System]. As an example, you could set your primary to 25 PSI for faster force carbonation and set each line to a different pressure based on desired carbonation level. Since this does not have a gauge, you need some sort of a gauge to use for tuning this in. The gauge doesn’t have to stay connected, just while you’re setting the regulator. This is a perfect application of a Spunding Valve [See: Build a Spunding Valve! – How and Why]
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
From the product description, check product page for current description, price and availability:
A small barbed regulator for use with liquid or gas
Made from acetyl, nitrile, brass and stainless steel parts
Controls pressure from 0 – 150 psi
Includes 3/16 inch
Notes from HBF: This is an inline secondary regulator. You still need a primary regulator attached to your CO2 tank. The idea is, you set the primary to the highest pressure you will use (without exceeding specifications of any component of your system) and then use these regulators inline (one per line) to fine tune pressure and carbonation [See: Balancing Your Draft System]. As an example, you could set your primary to 25 PSI for faster force carbonation and set each line to a different pressure based on desired carbonation level. Since this does not have a gauge, you need some sort of a gauge to use for tuning this in. The gauge doesn’t have to stay connected, just while you’re setting the regulator. This is a perfect application of a Spunding Valve [See: Build a Spunding Valve! – How and Why]
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
Brewer’s Best Conditioning Tablets 250 Count (approximate)
More Info
From the product description, check product page for current description, price and availability:
Brewer’s best conditioning tablets
Add 3 to 5 tablets per 12 oz bottle
250 count
This unique priming sugar is in tablet format and is made from dextrose, dry malt extract, and heading powder. To use, add 3 to 5 tablets per 12 oz. bottle depending on desired carbonation level, and condition for 1 week. Each 4.5 ounce pack contains approximately 250 tablets.
These take the place of traditional priming sugar. Carbonation tabs are also handy if you keg, but still want to naturally carbonate a few bottled beers. In that scenario, you would keg the majority of your beer and bottle portion of the batch adding these to each bottle so that you can skip a bottling bucket and traditional priming sugar.
Brewer’s Best Conditioning Tablets 250 Count – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
Pin Lock Adjustable Pressure Relief Valve w Gauge 15psi Spunding
More Info
From the product description, check product page for current description, price and availability:
These are purpose built high quality valves by BrewMaster. Not just hardware store pieces like the competitors.
Two functions in one great piece of hardware!
The Pin Lock QD Adjustable Pressure Valve W/Gauge relieves pressure while filtering from one keg to another. At the same time it gives you the ability to read the pressure in the receiving keg. And Ferment under desired pressure!
Gauge reads 0~15 PSI.
The farthest end away from the Pin lock disconnect is how you adjust the pressure.
Simply turn the ap on way of the other until the desired pressure is maintained.
You can also naturally carbonate your beer in a keg without have to worry about oer carbonating.
This Ball Lock Adjustable Pressure valve with gauge allows you to relieve pressure while filtering your beer from one keg to another a lowing a closed system.
A Spunding Valve allows you to ferment under pressure, naturally and precisely carbonate in the keg, fix over-carbonated beers and lots more. See: Build a Spunding Valve – for loads of information on building and using a Spunding Valve.
As if this posting, this is eBay offering is selling for just $33.99. Shipping is also free to many US addresses. Prices, shipping and availability can change quickly. Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this this post was published; however, they may differ from those you see when you visit the product page. Check the product page for current price, description and availability.
Looking for deal on pin lock kegs? Generally speaking, Keg Connection can have some great deals on pin locks. Check out their pin lock kegs page for current selection and pricing
Check sale or product page for current availability & pricing
pinned
This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
A Spunding Valve allows you to ferment under pressure, naturally and precisely carbonate in the keg, fix over-carbonated beers and more. See: Build a Spunding Valve for more info. Take a look at Build Option 2 for a version that uses this fitting. A photo of this fitting as part of a Spunding Valve build is to the right. Note: The description of this has changed since I first purchased it in October of 2018. At that time it was titled HFS (R) Twin Fitting, Adapter 1/4″ male SAE 37 Degree Flare to 1/4″ Male NPT ; Stainless Steel 304.
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
pinned
amazon
Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions. prod:B014UJEVUG
From the product description, check product page for current description, price and availability:
Highly fermentable – perfect for increasing gravity/ alcohol
Use 4oz-5oz per 5 gallons to prime
Dextrose monohydrate (pure d-glucose)
Pure corn sugar (Dextrose monohydrate) for use as an adjunct in brewing, for winemaking, or for priming bottle conditioned beers. Half as sweet as table sugar (sucrose), but it has a neutral flavor that will not change the taste of your fermented beverage.
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
From the product description, check product page for current description, price and availability:
An ideal solution if you want to serve different beers at different gas pressures. In a typical multiple line, multiple pressure system you would run a gas line from you main regulator into a secondary regulator where you would set different pressures. While that is ideal it is a little pricey. This little sweetheart lets you set different pressures at a far lower cost. What we do is set the main regulator at the highest pressure we want in the system – for example a keg of soda that you want to carbonate and serve at 25 psi. Run the gas line into a manifold and then install one of these after the manifold on each line where you want to decrease the pressure, for example lowering to 10psi to serve your British pale ale and 14 psi to serve your summertime lawnmower lager.
While this unit does not have a pressure gauge you can use an adjustable relief valve/spunding valve on your keg to tell the pressure. Pressure adjusments can be made with a screwdriver.
The maximum inlet pressure is 150 psi. Made from non corrosive acetyl, nitrile, and stainless parts. The regulator comes with two brass barbs to fit 3/16″ tubing on. Alternatively, you can remove the barbs and use 1/4″ tubing directly on the regulator. The aluminum manifolds linked above feature 1/4″ barbed outlets and are a good match with this regulator.
Works with 0 – 150 psi
Works with both gas and liquid
Comes with two brass barbs
Has two mounting points
Made from non corrosive acetyl, nitrile, and stainless parts
Notes from HBF: This is an inline secondary regulator. You still need a primary regulator attached to your CO2 tank. The idea is, you set the primary to the highest pressure you will use (without exceeding specifications of any component of your system) and then use these regulators inline (one per line) to fine tune pressure and carbonation [See: Balancing Your Draft System]. As an example, you could set your primary to 25 PSI for faster force carbonation and set each line to a different pressure based on desired carbonation level. Since this does not have a gauge, you need some sort of a gauge to use for tuning this in. The gauge doesn’t have to stay connected, just while you’re setting the regulator. This is a perfect application of a Spunding Valve [See: Build a Spunding Valve! – How and Why]
As of this posting, MoreBeer has this on sale for just $8.99. Shipping is free with a qualifying $59 order to many US addresses. Price, promotions and availability can change quickly. Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this this post was published; however, they may differ from those you see when you visit the product page. Check the product page for current price, description and availability.
Stacks With… Site Wide Sale: For a short time, MoreBeer is taking 10% off nearly everything, site wide when you use coupon code SAVEME10. There are a few exceptions. Shipping is also free to most US addresses with a qualifying $59 order. 10% Off at MoreBeer! – remember promo code SAVEME10. That sale makes this great little tool just $8.09.
This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
From the product description, check product page for current description, price and availability:
Use this quick disconnect set to seal a soda bottle under CO2 pressure. An ideal way to bring homebrew to a party without all the accessories.
A single-handed connection and disconnection
Strong plastic that can handle 250 degrees, very durable, and is medical-grade compliant and made from FDA approved material
Easy installation into your home brewery
KENT Systems quarter turn design functions safely
TIP N’ TRICK: Add a CO2 tee inline with your current CO2 setup and install the H481 Kent Shut-Off Female QD w/ 1/4 in Barb included. This way you always have access to CO2 accessible to put your beer under pressure before leaving for the party.
Uses:
PET Bottles as Growlers: These are generally intended to convert 1L and 2L bottles to growlers. Fill up a 1L or 2L PET bottle with your favorite homebrew. Put one of these on (purge the headspace by squeezing if you want to) and then pressurize for transport. This should help to reduce oxygen pickup and maintain carbonation levels.
Fine tune or rapidly carbonate beer: You can also use this cap to rapidly carbonate beer. Same process as for transport, just set your regulator to the proper pressure and shake or agitate the PET bottle to help introduce CO2. Or hook it up to CO2 and let it sit in you kegerator.
The Kent System Is Unique!
This system is unique for a couple reason. First it’s comprised of two components (most caps are a single piece). One piece threads onto the bottle, the other is a QD that has a barb and connects to your CO2 system. Because of this two piece design you can use one QD with loads of caps, reducing costs vs traditional one piece designs.
A second thing that sets this system apart is… it’s the only solution I’m aware of that works with pin lock QDs, or better stated without the need for ball lock QDs. Since this is barbed in can hook to any compatible CO2 line no matter if you use ball lock or pin lock QDs.
As of this posting, MoreBeer has the Cap and QD set for $9.99, while extra caps are $4.99. Shipping is free with a qualifying $59 order to many US addresses. Price, promotions and availability can change quickly. Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this this post was published; however, they may differ from those you see when you visit the product page. Check the product page for current price, description and availability.
Save 10%! For a short time, MoreBeer is taking 10% off nearly everything, site wide when you use coupon code SAVEME10. There are a few exceptions. Shipping is also free to most US addresses with a qualifying $59 order. 10% Off at MoreBeer! – remember promo code SAVEME10.
Check sale or product page for current availability & pricing
pinned
This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
BowTie v1 Assembly
BlowTie v1 assembly that has been updated to digital, see below for walk through of that process.
The BlowTie is the heart of this build. It has DuoTight Push to Connect connections on both side as well as an adjustment knob to set pressure. Related: 
