Category Archives: Carbonation

TWO x Stainless Carbonation Cap for PET Bottles by Luckeg + Draft Line Cleaner Builds

 

PET Bottles Beer Carbonation Cap 2 PCS - Counter Pressure Bottle Filling with 5/16" Barb, Carbonation Beer Soda Water Brewed Beer, Fits Most Soft Drink PET Bottles

PET Bottles Beer Carbonation Cap 2 PCS – Counter Pressure Bottle Filling with 5/16″ Barb, Carbonation Beer Soda Water Brewed Beer, Fits Most Soft Drink PET Bottles by Luckeg

More Info
Highlighted Features
  • Heavy Duty Stainless Steel for Carbonation Cap (2 PCS), Perfect Polishing Surface,with two four Food Grade Silicone Seal Rings;
  • Unique Machined the Carbonation Cap, can fit Both Black Liquid Ball Lock Disconnect and Grey Gas Ball Lock Disconnect;
  • The Carbonation Cap can fits Most Soft Drink PET Bottles, easy to Counter Pressure Bottle Fill PET Bottles;
  • The Carbonation Cap can Carbonate Various Beverages, including Soda, Beer, Juice, Water or Clean Beer Line;
  • Quality Guarantee: Any Defective for Carbonation Cap, Money Back or Replacement free.

 

Potential Uses:

  • PET Bottles as Growlers: These are generally intended to convert 1L and 2L bottles to growlers.  Fill up a 1L or 2L PET bottle with your favorite homebrew.  Put one of these on (purge the headspace by squeezing if you want to) and then pressurize for transport.  This should help to reduce oxygen pickup and maintain carbonation levels.
  • Fine tune or rapidly carbonate beer: You can also use this cap to rapidly carbonate beer.  Same process as for transport, just set your regulator to the proper pressure and shake or agitate the PET bottle to help introduce CO2.  Or hook it up to CO2 and let it sit in you kegerator.
  • Draft Line Cleaning Projects:  I have developed three draft line cleaning projects using similar SS Caps – Build A Recirculating Draft Line Cleaning Pump | Mark II Keg and Carboy Cleaner Draft Line Cleaning Pump ConversionBuilding a Simple Ball Lock Draft Line Flushing Setup
  • Related Top Post: Fun with Carbonation Caps!

PET Bottles Beer Carbonation Cap 2 PCS – Counter Pressure Bottle Filling with 5/16″ Barb, Carbonation Beer Soda Water Brewed Beer, Fits Most Soft Drink PET Bottles – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading

Stainless Carbonation Cap TEE – convert PET bottles to mini kegs

304 Stainless Steel Carbonation Cap Tee

More Info
Highlighted Features
  • 🍻Connecting three directions,to attach both a liquid and gas
  • 🍻304 food grade stainless steel,to ensure health and safety, Good wear resistance and durability, can be used for a lifetime,It is more resistant to oxidation and discoloration than brass, and less prone to breakage and damage than plastic materials
  • 🍻Internal direct channel,use with carbonized head link,can make a small beer system
  • 🍻Easy to clean, standard size, and Flexible installation
  • 🍻It have two MPT interfaces and one FPT interface ,full size design for easy passage of gas

 

304 Stainless Steel Carbonation Cap Tee Piece For Brewing to attach both gas and liquid – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Possible Applications…

… Line cleaning setup of convert compatible PET bottles to mini ball lock kegs – See: Hands on Review: Kegland Ball Lock Cleaning Kit – that features a different tee, but similar idea and…

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

SKY Stainless Steel Carbonation Cap for PET Bottles + Our Draft Line Cleaning Builds

EBEST SKY Stainless Steel Carbonation Cap Homebrew Soft Drink PET Bottle Filling Counter Pressure Bottle Filling 5/16 Inch Barb

More Info




Potential Uses:

  • PET Bottles as Growlers: These are generally intended to convert 1L and 2L bottles to growlers.  Fill up a 1L or 2L PET bottle with your favorite homebrew.  Put one of these on (purge the headspace by squeezing if you want to) and then pressurize for transport.  This should help to reduce oxygen pickup and maintain carbonation levels.
  • Fine tune or rapidly carbonate beer: You can also use this cap to rapidly carbonate beer.  Same process as for transport, just set your regulator to the proper pressure and shake or agitate the PET bottle to help introduce CO2.  Or hook it up to CO2 and let it sit in you kegerator.
  • Draft Line Cleaning Projects:  I have developed three draft line cleaning projects using similar SS Caps – Build A Recirculating Draft Line Cleaning Pump | Mark II Keg and Carboy Cleaner Draft Line Cleaning Pump ConversionBuilding a Simple Ball Lock Draft Line Flushing Setup

EBEST SKY Stainless Steel Carbonation Cap Homebrew Soft Drink PET Bottle Filling Counter Pressure Bottle Filling 5/16 Inch Barb – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading

Stainless Carbonation Cap TEE – convert PET bottles to mini kegs

304 Stainless Steel Carbonation Cap Tee

More Info


Highlighted Features
  • 🍻Connecting three directions,to attach both a liquid and gas
  • 🍻304 food grade stainless steel,to ensure health and safety, Good wear resistance and durability, can be used for a lifetime,It is more resistant to oxidation and discoloration than brass, and less prone to breakage and damage than plastic materials
  • 🍻Internal direct channel,use with carbonized head link,can make a small beer system
  • 🍻Easy to clean, standard size, and Flexible installation
  • 🍻It have two MPT interfaces and one FPT interface ,full size design for easy passage of gas

 

304 Stainless Steel Carbonation Cap Tee Piece For Brewing to attach both gas and liquid – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Possible Applications…

… Line cleaning setup of convert compatible PET bottles to mini ball lock kegs – See: Hands on Review: Kegland Ball Lock Cleaning Kit – that features a different tee, but similar idea and…


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Kegland Duotight Inline Regulator [control each keg separately] – on sale for $8.54 + Hands on Review

Duotight In-Line Regulator D1046

Duotight In-Line Regulator via MoreBeer

More Info

From the product description, check product page for current description, price and availability:

The Duotight In-Line regulator works with both gas and liquid. Easily adjust the flow with the yellow adjustment knob. 8 mm Duotight fittings at both inlet and outlet make this unit perfect for use with EVABarrier 8 mm OD tubing (D1717 or D1718).

Suitable for applications ranging from 0-150 psi. Since this unit does not have a built-in pressure gauge, it can be used in the full pressure range without ever needing to purchase or swap out the gauge. We recommend using an adjustable relief valve/spunding valve on your keg to set the pressure.

This regulator is perfect for lowering your mains water pressure for use with the Continuous Soda Carbonator Keg Lid.

Specifications:

  • Pressure Range: 0–150 psi
  • Suitable for mains water pressure
  • Liquid and gas compatible
  • Easily disassembles for cleaning
  • 8mm (5/16″) Duotight fittings at both ends
  • Wall mountable
  • Made from non-corrosive acetyl, nitrile, and stainless parts

 

Duotight In-Line Regulator D1046

Related Reviews, Posts & Products


duotightreview

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

DuoTight Inline CO2 Regulator [control each keg separately] + Hands on Review

DuoTight Inline Secondary with Gauge

Highlighted Features
  • Package contains:
  • | Featues:-Suits pressures 0-150psiSuitable for mains water pressureSuitable for liquid or gasMade from Acetal/POM, EPDM o-rings and stainless teethSuits 8mm (5/16) OD Tubing such as our Evabarrier TubingIncludes integrated 0-60psi Pressure Gauge
  • Duotight Inline In-Line Regulator - With Integrated Gauge For Water Or Gas
  • ADVERT FOR: ONLY

This is an inline secondary regulator.  You still need a primary regulator attached to your CO2 tank.  The idea is, you set the primary to the highest pressure you will use (without exceeding specifications of any component of your system) and then use these regulators inline (one per line) to fine tune pressure and carbonation.  As an example, you could set your primary to 25 PSI for faster force carbonation and set each line to a different pressure based on desired carbonation level.

Check out my Hands on Review of this great tool

Duotight Inline In-Line Regulator – With Integrated Gauge For Water Or Gas – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Hands on Review!

Compatible Mounting Boards

More DuoTight!

duotightclips

duotightreview

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

TWO x Stainless Carbonation Cap for PET Bottles by Luckeg + Draft Line Cleaner Builds

 

PET Bottles Beer Carbonation Cap 2 PCS - Counter Pressure Bottle Filling with 5/16" Barb, Carbonation Beer Soda Water Brewed Beer, Fits Most Soft Drink PET Bottles

PET Bottles Beer Carbonation Cap 2 PCS – Counter Pressure Bottle Filling with 5/16″ Barb, Carbonation Beer Soda Water Brewed Beer, Fits Most Soft Drink PET Bottles by Luckeg

More Info


Highlighted Features
  • Heavy Duty Stainless Steel for Carbonation Cap (2 PCS), Perfect Polishing Surface,with two four Food Grade Silicone Seal Rings;
  • Unique Machined the Carbonation Cap, can fit Both Black Liquid Ball Lock Disconnect and Grey Gas Ball Lock Disconnect;
  • The Carbonation Cap can fits Most Soft Drink PET Bottles, easy to Counter Pressure Bottle Fill PET Bottles;
  • The Carbonation Cap can Carbonate Various Beverages, including Soda, Beer, Juice, Water or Clean Beer Line;
  • Quality Guarantee: Any Defective for Carbonation Cap, Money Back or Replacement free.

 

Potential Uses:

  • PET Bottles as Growlers: These are generally intended to convert 1L and 2L bottles to growlers.  Fill up a 1L or 2L PET bottle with your favorite homebrew.  Put one of these on (purge the headspace by squeezing if you want to) and then pressurize for transport.  This should help to reduce oxygen pickup and maintain carbonation levels.
  • Fine tune or rapidly carbonate beer: You can also use this cap to rapidly carbonate beer.  Same process as for transport, just set your regulator to the proper pressure and shake or agitate the PET bottle to help introduce CO2.  Or hook it up to CO2 and let it sit in you kegerator.
  • Draft Line Cleaning Projects:  I have developed three draft line cleaning projects using similar SS Caps – Build A Recirculating Draft Line Cleaning Pump | Mark II Keg and Carboy Cleaner Draft Line Cleaning Pump ConversionBuilding a Simple Ball Lock Draft Line Flushing Setup
  • Related Top Post: Fun with Carbonation Caps!

PET Bottles Beer Carbonation Cap 2 PCS – Counter Pressure Bottle Filling with 5/16″ Barb, Carbonation Beer Soda Water Brewed Beer, Fits Most Soft Drink PET Bottles – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading

Measureman Digital Pressure Gauge + Spunding Valve Build

MEASUREMAN 2-1/2" Dial Size Digital Air Pressure Gauge with 1/4'' NPT Bottom Connector and Protective Boot, 0-200psi, Accuracy 1%, Battery Powered with LED Light

MEASUREMAN 2-1/2″ Dial Size Digital Air Pressure Gauge with 1/4” NPT Bottom Connector and Protective Boot, 0-200psi, Accuracy 1%, Battery Powered with LED Light

More Info

From the product description, check product page for current description, price and availability:

  • For pneumatic, air pressure measuring, typical for tire gauge, tire inflator, air pressure system etc.
  • Dial size: 2-1/2″, green backlight
  • Plastic case and protective boot,
  • Solid brass connection, 1/4″NPT male
  • 0-200psi, bar, kg/cm2, kpa, Accuracy:1%

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

A possible homebrew application for this is to use it as part of a Spunding Valve Build.   A Spunding Valve allows you to ferment under pressure, naturally and precisely carbonate in the keg, fix over-carbonated beers and lots more. See: [Build a Spunding Valve].

Note that this has a maximum capacity of 200 PSI. That’s going to exceed the capacity for most homebrewing components. Make sure all of your equipment is rated for your desired pressure.

MEASUREMAN 2-1/2″ Dial Size Digital Air Pressure Gauge with 1/4” NPT Bottom Connector and Protective Boot, 0-200psi, Accuracy 1%, Battery Powered with LED Light – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

tsrspund

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Kegland Duotight Inline Regulator [control each keg separately] – on sale for $8.64 + Hands on Review

Duotight In-Line Regulator D1046

Duotight In-Line Regulator via MoreBeer

More Info

From the product description, check product page for current description, price and availability:

The Duotight In-Line regulator works with both gas and liquid. Easily adjust the flow with the yellow adjustment knob. 8 mm Duotight fittings at both inlet and outlet make this unit perfect for use with EVABarrier 8 mm OD tubing (D1717 or D1718).

Suitable for applications ranging from 0-150 psi. Since this unit does not have a built-in pressure gauge, it can be used in the full pressure range without ever needing to purchase or swap out the gauge. We recommend using an adjustable relief valve/spunding valve on your keg to set the pressure.

This regulator is perfect for lowering your mains water pressure for use with the Continuous Soda Carbonator Keg Lid.

Specifications:

  • Pressure Range: 0–150 psi
  • Suitable for mains water pressure
  • Liquid and gas compatible
  • Easily disassembles for cleaning
  • 8mm (5/16″) Duotight fittings at both ends
  • Wall mountable
  • Made from non-corrosive acetyl, nitrile, and stainless parts

 

Kegland’s DuoTight Inline Regulator allows you to easily and inexpensivly maintain multiple serving pressures in your kegerator.

Duotight In-Line Regulator D1046

Save!

MoreBeer’s Sale and Clearance section includes over 500 items as of this post.

Lots of Kegland Gear is included in the mix including this great tool. It’s marked down to $8.54.

duotightreview

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Ferroday Carbonation Keg Lid + Diffusion Air Stone & Tubing

FERRODAY Carbonation Keg Lid Cornelius Keg Lid Soda Beer Forced Carbonation Homebrew Carbonator Stainless Steel 304 Carbonation Keg Lid with Diffusion Stone 20" Tube - Oval Keg Lid

Ferroday Ball Lock Carbonation Lid with Diffusion Stone

More Info

From the product description, check product page for current description, price and availability:

  • 【Includes All You Need】Keg lid + Air stone + 20 inch tubing; All the metal parts are made of SS304, the head of the pressure release valve is made of solid ABS, food safe tubing, gaskets, all sturdy and wear-resistant.
  • 【Widely Used for Home Brew】 Widely used to carbonate beer, soda, juice, water and even sparkling water. Fits to all the homebrew kegs that require a standard oval lid, normally called: corny keg/cornelius keg/ ball lock keg…This is a perfect choice for keg lid replacement!
  • 【Best Carbonation & No More Shaking】Forced Beer Carbonation: the diffusion stone will send a tremendous number of gas bubbles out through the beer and the miniscule bubbles will create a huge amount of surface area to help absorb CO2 rapidly into the beer! No need to shake the keg during carbonation anymore!
  • 【Safe Pressure Release & Cleaning Tips】 1. For safety concerns, the valve will automatically open up when pressure in the keg reaches 70 psi; 2. Please release the pressure in keg before open the keg. 3. Please clean the kit before and after each use, and please note the diffusion stone needs to be boiled in water to unclog pores.

 

This has a ball lock post on it that has in inlet on the inside of the keg. That inlet connects to tubing which in turn connections to a carbonation stone. This should work on standard ball lock and pin lock kegs, although you’ll need a ball lock QD to connect to it.

How do these work?  My theory… CO2 is dispersed through the stone into solution. This causes a small amount of movement in the liquid, this movement helps to the solution to come to equilibrium more quickly than simple head space pressure. I’m not saying this is a steady flow of bubbles, my guess is a slow, periodic occurrence, enough to speed up the process. This is a theory.

FERRODAY Carbonation Keg Lid Cornelius Keg Lid Soda Beer Forced Carbonation Homebrew Carbonator Stainless Steel 304 Carbonation Keg Lid with Diffusion Stone 20″ Tube – Oval Keg Lid – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Kegland DuoTight Inline Secondary with Gauge! control each keg separately & more + Hands on Review

Duotight Regulator with Gauge

Duotight Regulator with Gauge via William’s Brewing

More Info

From the product description, check product page for current description, price and availability:

This 8mm Duotight compatible regulator with 0-60 PSI gauge fits 8mm outer diameter EvaBarrier tubing. Suitable for gas, all components are food grade. The included gauge is accurate to plus or minus 6 PSI.

Note: This unit comes with a 0-60 PSI gauge that is only ¾” in diameter. If you intend to use this regulator in the 10 to 30 PSI range, you will need to order optional gauge C93, which reads 0-30 PSI. Below 10 psi, this regulator is not very accurate. You will also need EvaBarrier tubing to connect this regulator, either our item number Z91 or Z92.

This is perfect for reducing the pressure of one gas line in a draft system – for example, with a single regulator and C02 bottle, you can set the pressure at the C02 bottle with the larger regulator (not included) and then put this regulator inline to reduce the pressure. Handy for when you want to carbonate one keg at 25 PSI and dispense another at 10 PSI.


 

 

Duotight Regulator with Gauge

Upgrade to Digital:

Kegland has released a digital regulator option that works with their great inline regulator and gauge-equipped BlowTie Spunding Valves.

Hands on Review: Kegland Digital Gauges!

Continue reading

Kegland Carbonation Ball Lock Cap Tee Fitting – on sale for $3.59 + Related Reviews

Carbonation Ball Lock Cap Tee Fitting KG501

Carbonation Ball Lock Cap Tee Fitting via MoreBeer

More Info

From the product description, check product page for current description, price and availability:

This simple tee fitting allows you to turn a PET growler or repurposed soda bottle into a portable, pressurizable growler. PCO 1881 threading on all ends—the most common threading for plastic soda bottles. One end is female threaded to attach to your vessel, and the other ends are male threaded in order to accept two Carbonation Cap Ball Lock Adapters. A small length of 3/16″ ID tubing can be attached to your bev-out cap to function as the dip tube. If you’re using EVABarrier tubing, simply connect using a Duotight reducer.

Tee fitting only. Does not include Carbonation Caps or PET growler.

KegLand Part Number: KL14830


 

Carbonation Ball Lock Cap Tee Fitting KG501

Note that the pictured bottle and caps are not included.  You’ll need two of these… Carbonation and Line Cleaning Ball Lock Cap – Plastic FE133

Related…


duotightreview

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

Convert PET Bottles to Ball Lock Mini Kegs – Stainless Carbonation Cap TEE

Stainless Steel Carbonation Cap Tee Connected with Bottle and Carbonation Cap

Highlighted Features
  • Stainless steel 304 material
  • Make a really small and useful keg system out of PET plastic bottles. Great for taking beer to a party or making your own micro/portable/mini keg system.
  • This tee piece now enables you to attach both a liquid and gas disconnect to the bottle at the same time.
  • Save your time to get more Soda Beer Fruit Juice Water once.
  • Do not exceed 4.5bar or 65psi with this product.

Stainless Steel Carbonation Cap Tee Connected with Bottle and Carbonation Cap – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Possible Applications…

… Line cleaning setup of convert compatible PET bottles to mini ball lock kegs – See: Hands on Review: Kegland Ball Lock Cleaning Kit – that features a different tee, but similar idea


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Keg CO2 Charger w/Carbonation Cap

Beer Keg CO2 Charger, Black Handhold Pressurizer Keg Charger Kit with Carbonation Cap

More Info


Highlighted Features
  • Professionally manufactured and exquisitely crafted, it is a good accessory for home brewing beer.
  • The method of use is simple, beautiful and practical, and is very suitable for beverage barrels such as beer and cola.
  • Small and lightweight, it fits your portable beer keg and homemade beer keg.
  • Easy to install and operate, simply screw on the broken MFL thread, attach to the barrel and press the .
  • Made of high-quality materials, it is , and can be used for a long time.

 

Liineparalle Beer Keg CO2 Charger, Black Handhold Pressurizer Keg Charger Kit with Carbonation Cap for Beer Brewing Soda Drink (#1) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Our Line Cleaning Builds:

Also Consider:

ball lock jumperStainless Steel Ball Lock Jumper with Food Grade Silicone O-Rings: Allows you to connect multiple ball lock runs to clean multiple lines and taps at the same time. Works with both liquid and gas QDs.  Stainless Steel Ball Lock Jumper – via Valuebrew – An easy add-on… food grade o-rings, featured in our Keg Rebuild Post



This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

BlowTie Diaphragm Spunding Valve v2 + Hands on Review

Duotight BlowTie 2 Diaphragm Spunding Valve w/Integrated Pressure Gauge (0-15 PSI) for Pressure Fermentation - KL15042

Duotight BlowTie 2 Diaphragm Spunding Valve w/Integrated Pressure Gauge (0-15 PSI) for Pressure Fermentation – KL15042

More Info

From the product description, check product page for current description, price and availability:

  • The BlowTie 2 features an integrated pressure gauge. Quickly and easily dial in your pressure setting.
  • The BlowTie 2 features an integrated pressure gauge. Quickly and easily dial in your pressure setting.
  • Easily disassembles for cleaning
  • 8mm (5/16″) Duotight fittings at both ends
  • Gauge reads from 0-15 psi

 

A Spunding Valve allows you to maintain a set pressure. If pressure in the vessel exceeds the set point, it is expelled. Lots more in our definitive Spunding Valve Resource Post

Learn More! Hands on Review: Kegland BlowTie Diaphragm Spunding Valve!

Duotight BlowTie 2 Diaphragm Spunding Valve w/Integrated Pressure Gauge (0-15 PSI) for Pressure Fermentation – KL15042 – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Related Resources!

duotightreview

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

BlowTie Diaphragm Spunding Valve + Hands on Review

BlowTie Diaphragm Ball Lock beer Spunding Valve Complete Kit for Home Brewing beer corny beer kegBlowTie Diaphragm Ball Lock beer Spunding Valve

More Info

From the product description, check product page for current description, price and availability:

  • With this complete kit you’ll be ready to use the BlowTie Spunding Valve right out of the box.y for this reason.
  • Release excess pressure on a pressurized fermenter or from a receiving keg during pressure transfers
  • Much more accurate than the spring and poppet style, and works much better at lower pressures.
  • Kit Includes: BlowTie, Pressure Gauge, Ball Lock Disconnect, Duotight Tee & Flared Duotight Fitting, 2x Lengths of EVABarrier 8mm OD Tubing
  • spunding valve is easy to clean and adjust, the spunding valve also works great for controlling the flow rate when doing a closed beer transfer for fermenter to keg

 

A Spunding Valve allows you to maintain a set pressure. If pressure in the vessel exceeds the set point, it is expelled. Lots more in our definitive Spunding Valve Resource Post

BlowTie Diaphragm Ball Lock beer Spunding Valve Complete Kit for Home Brewing beer corny beer keg – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Review & Related Resources!

duotightreview

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Stainless Steel Carbonation Cap for PET Bottles

Yosoo Stainless Steel CarbonationHome Brew Beer Fast Soda Made Counter Pressure Bottle Filling Fit Most Soft Drink PET Bottles

Yosoo Stainless Steel Carbonation Cap Home Brew Beer Fast Soda Made Counter Pressure Bottle Filling Fit Most Soft Drink PET Bottles

More Info


Highlighted Features
  • 【Stainless Steel】Made of stainless steel material, more solid and last longer, making it easier to carbonate your beverages!
  • 【Method of 】With this you can simply fill an old PET bottle with cold liquid of your choice and carbonate by connecting your gas ball lock disconnect.
  • 【Making Soft Drinks】With it, you can make your own soda water, carbonate beer, or even make your own soft drinks.
  • 【for Most PET Bottles】It is designed to fit onto most soft drink PET bottles, inject CO2 into the bottle, creating carbonation.
  • 【Add and Maintain Carbonation】The carbonation is highly effective method to add and maintain carbonation in beverages for extended periods of time.

 

Applications:

  • PET Bottles as Growlers: These are generally intended to convert 1L and 2L bottles to growlers.  Fill up a 1L or 2L PET bottle with your favorite homebrew.  Put one of these on (purge the headspace by squeezing if you want to) and then pressurize for transport.  This should help to reduce oxygen pickup and maintain carbonation levels.
  • Fine tune or rapidly carbonate beer: You can also use this cap to rapidly carbonate beer.  Same process as for transport, just set your regulator to the proper pressure and shake or agitate the PET bottle to help introduce CO2.  Or hook it up to CO2 and let it sit in you kegerator.
  • Draft Line Cleaning Projects:  I have developed three draft line cleaning projects using similar SS Caps – Build A Recirculating Draft Line Cleaning Pump | Mark II Keg and Carboy Cleaner Draft Line Cleaning Pump ConversionBuilding a Simple Ball Lock Draft Line Flushing Setup
  • Related Top Post: Fun with Carbonation Caps!

Yosoo Stainless Steel CarbonationHome Brew Beer Fast Soda Made Counter Pressure Bottle Filling Fit Most Soft Drink PET Bottles – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading

Announcing: KegLand Core 360 Mini C02 Regulator – Works w/Sodastream OR 16 gram cartridges!

KegLand Core 360 Mini C02 Regulator from William's Brewing

KegLand Core 360 Mini C02 Regulator from William’s Brewing

More Info

From the product description, check product page for current description, price and availability:

The Mini 360 Core Actuator Regulator from KegLand is extremely versatile, and can be used with either a Sodastream® C02 Bottle or a 16 gram C02 cartridge.

Unlike other regulator designs, the Mini 360 Core does not puncture or open the C02 cartridge or cylinder until after the C02 source is screwed onto the regulator. After securing the C02 source to the regulator, you then tighten the plunger which pierces the cartridge, or opens the Sodastream pin. The result is no wasted gas when you install a cartridge.

It also has a choice of two disconnect orientations, and features a DuoTight compatible 6.5mm hose barb outlet which can also accept ¼” inner diameter gas tubing. Also included is a Female Flare outlet so you can screw this regulator directly onto a threaded Ball Lock Disconnect if you prefer.

The pressure relief valve releases at 65 PSI, but you can switch this out for a different range by using our red 35 PSI relief valve or our 100 PSI grey relief valve.

The Mini Gauge is heavily protected with brass on all sides to prevent damage when dropping. The gauge itself is a standard KegLand Mini Gauge, and you can swap out another KegLand Mini gauge with a 2mm hex wrench if you would prefer a different range than 0-60 PSI.

Includes:

1 x Mini 360 Core Actuator Regulator with Sodastream® thread

1 x 360° 6.5mm duotight compatible hose barb

1 x 360° FFL Fitting for MFL Disconnects

1 x Port end cap

1 x 65psi Green PRV

1 x 16 Gram Threaded C02 Cartridge Adapter

Note: This also fits Leland® brand 74 gram threaded cartridges if you order our adapter item G60. It does not fit 74 gram Brewer’s Edge® C02 cartridges.

Note: Pictured Sodastream® 60 Liter C02 Bottle not included, these are available at many home stores and also exchanged at many stores.


 

This is… DuoTight compatible and it works with Sodastream tanks and 16 gram cartridges!  It’s worth noting that DuoTights are not a requirement if you’re not currently using that great system.

KegLand Core 360 Mini C02 Regulator

duotightreview

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. 1.1.22

Brand New Universal Replacement Keg Lid by Beverage Factory [Ball Lock & Pin Lock]

Beverage Factory BLL-N-AUS Replacement Lid for Home brew Keg

Beverage Factory BLL-N-AUS Replacement Lid for Home brew Keg


From the product description, check product page for current description, price and availability:

This is a universal replacement lid for home brew/soda kegs. BRAND new lid comes with closure O-Ring pressure release Valve with sturdy 1 inch metal ring to relieve pressure out of your keg.


One difference between Pin Lock and Ball Lock kegs is the type of lids that come with each.  Ball Locks, generally, have a manual PRV valve, while Pin Locks do not.  Ball Lock style lids are, in my opinion, superior because the manual PRV allows you to easily vent your keg as needed.  The good news is that, for standard kegs, the lids are the same size and can be interchanged.  That means you can use a Ball Lock style lid in a Pin Lock Keg.  See: What’s the Difference Between Ball Lock Kegs and Pin Lock Kegs?

Beverage Factory BLL-N-AUS Replacement Lid for Home brew Keg – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

bulk keg orings

 

Ferroday 0.5 Micron Stainless Diffusion Stone + Silicone Tubing

Ferroday 0.5 Micron Diffusion Stone Stainless Steel Aeration Stone Carbonating Stone with 1/4" Barb & 20" Silicon Hose for Homebrew Wine Beer Soda (Stone0.5)

FERRODAY 0.5 Micron Diffusion Stone Stainless Steel Aeration Stone Carbonating Stone with 1/4″ Barb for Homebrew Wine Beer Soda Air Stone 0.5 Micron + 20 Inch Silicone Hose

More Info

From the product description, check product page for current description, price and availability:

  • [ Healthy Food Grade Material]: The Whole 0.5 micron diffusion stone is made of 304 Stainless Steel, which let our 0.5 micron aeration stone anti-corrosion & high temperature resistant & Durable. 20 inch gas line is made of food grade Silicone.
  • [ Unique Carbonated Flavour]: 0.5 micron diffusion stone produces smaller & finer bubbles which can make the gas combines with liquid faster. Make draft beer, home brew soda and other drinks more delicate, more exquisite and more fresh.
  • [ Various Use]: 0.5 Microns aeration stone is best for oxygenation & carbonation. Use this air stone to oxygenate wort and carbonate beer/ soda prior to fermentation. Works great for other drinks as well
  • [ Connect With Fittings]: Attaching the aeration stone barb to a 1/4″ ID hose, and the other side of the hose can be attached with the “gas in” post on a keg and then connect the keg with CO2 regulator.
  • [ Boiled Clean]: The 0.5 micron diffusion stone needs to be boiled in water to get clean & unclog the pores. Sometimes if the aeration stone get blocked, can be dipped in acid for 15 seconds and then rinse with water.

 

Possible homebrewing uses include – carbonating, oxygenating and aerating.

FERRODAY 0.5 Micron Diffusion Stone Stainless Steel Aeration Stone Carbonating Stone with 1/4″ Barb for Homebrew Wine Beer Soda Air Stone 0.5 Micron + 20 Inch Silicone Hose – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

More Fermentation Related!

 


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon