Category Archives: Cleaning

1/2″ Stainless Steel CIP Spray Ball by QiiMii + Mark Keg & Carboy Washer Mod

QiiMii Fixed Spray Ball Stainless Steel 304 Tank Cleaning Ball 1/2" NPT Threaded ( 1/2" INCH )

QiiMii Fixed Spray Ball Stainless Steel 304 Tank Cleaning Ball 1/2″ NPT Threaded (1/2″ INCH)

More Info
Highlighted Features
  • Connection: 1/2" NPT Female Thread
  • Wetting Radius: Max. 2.5m
  • Impact cleaning radius: Max. effective 0.6m
  • Working pressure: 1-3Bar
  • Recommended pressure: 2.5Bar

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

CIP (Clean in Place) Spray Balls are generally used for vessels that are too large to move.  Since they’re too large to move you… clean them in place.  If you have a larger setup, you could incorporate these into your system or routine to help clean your vessels more easily.

Other possible homebrew applications: A CIP ball could be as part of a recirculating or sparging setup or as part of a keg or carboy cleaning setup.  I use this rotary spray ball with my Mark II Keg and Carboy Cleaner.  See: Mark II Keg and Carboy Washer Mod – SS CIP Spray Ball

What are others saying?  Search this product’s Amazon reviews for “homebrew” – “brew” and “washer” – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

QiiMii Fixed Spray Ball Stainless Steel 304 Tank Cleaning Ball 1/2″ NPT Threaded ( 1/2″ INCH ) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading

TWO x Ferroday Stainless Carbonation Cap for PET Bottles – works on gas AND liquid posts + Fun With Carbonation Caps!

FERRODAY Stainless Steel Carbonation Cap Counter Pressure Bottle Filling 5/16 Barb CO2 Coupling to Carbonate Soda Beer Water Stainless Steel PET Bottle Filling Carbonation Cap & O-ring + Flat Gasket

FERRODAY Stainless Steel Carbonation Cap Counter Pressure Bottle Filling 5/16 Barb CO2 Coupling to Carbonate Soda Beer Water Stainless Steel PET Bottle Filling Carbonation Cap & O-ring + Flat Gasket

More Info
Highlighted Features
  • Heavy Duty Stainless Carbonation Cap: High quality stainless steel carbonation cap, well made for rust resistance and corrosion-proof. Would last for a long time in good condition. A must have equipment for homebrew Carbonation. For PCO1881/ 1 -1/8-8un PET Bottles, like most soft drink PET bottles
  • Great for Homebrew Carbonation/ Cleaning: This ball lock carbonation cap is most used for homemade beverage carbonation, and meanwhile it is great for cleaning beer/ soda/ water/ juice lines. Easy to set up
  • Easily Forced Carbonation Drinks: Ideal for forced carbonation drinks in bottles. Fit for most soft drink PET bottles. Just simply attach this cap with a PET bottle and a ball-lock gas disconnect to send CO2 into the bottle for beverage carbonation. Your homemade drinks will be right ready for drinkin
  • Food Safe Gasket/ No Leaks: We use premium material for the gaskets and o-rings. High resilient food safe rubber gaskets to seal against the threads and give you no leak connections! We updated our package with more o-rings and more gaskets for replacement
  • No Regrets Purchase: Stainless steel made carbonation cap. If any leaks, please change the O-ring or Gasket with the extra ones. We are committed to offering you high-quality products as well as superior service! Please let us know if there are any problems with this Stainless Steel Carbonation Cap, we will try our best to serve you. Provide technical support.

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

Applications:

  • PET Bottles as Growlers: These are generally intended to convert 1L and 2L bottles to growlers.  Fill up a 1L or 2L PET bottle with your favorite homebrew.  Put one of these on (purge the headspace by squeezing if you want to) and then pressurize for transport.  This should help to reduce oxygen pickup and maintain carbonation levels.
  • Fine tune or rapidly carbonate beer: You can also use this cap to rapidly carbonate beer.  Same process as for transport, just set your regulator to the proper pressure and shake or agitate the PET bottle to help introduce CO2.  Or hook it up to CO2 and let it sit in you kegerator.
  • Draft Line Cleaning Projects:  I have developed three draft line cleaning projects using similar SS Caps – Build A Recirculating Draft Line Cleaning Pump | Mark II Keg and Carboy Cleaner Draft Line Cleaning Pump ConversionBuilding a Simple Ball Lock Draft Line Flushing Setup
  • Related Top Post: Fun with Carbonation Caps!

One of the questions that arises on these type of carb caps, is… does it work with both liquid and gas posts?  Some models are universal fit and some work only with gas posts.  For draft line cleaning projects to work well, at least in my opinion, the carb cap that’s used needs to be universal.  I’m happy to report that the one I received did indeed work with both liquid and ball lock posts.  Check the product description for current specs.

Check out my Hands on Review of this great carb cap.

FERRODAY Stainless Steel Carbonation Cap Counter Pressure Bottle Filling 5/16 Barb CO2 Coupling to Carbonate Soda Beer Water Stainless Steel PET Bottle Filling Carbonation Cap & O-ring + Flat Gasket  – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also Available in Single Count: Ferroday Stainless Carbonation Cap Counter Pressure Bottle Filling With 5/16″ Barb,CO2 Coupling To Carbonate Soda Beer Fruit Juice Water – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading

Stainless Steel Sink Protector Mat – Help Stop Small Parts from Going Down the Drain

BINO Kitchen Sink Protector Mat, Clear - Eco-Friendly - Kitchen Sink Mat with Quick Draining Design - Kitchen Sink Mats for Stainless Steel Sink

BINO Kitchen Sink Protector Mat, Clear – Eco-Friendly – Kitchen Sink Mat with Quick Draining Design – Kitchen Sink Mats for Stainless Steel Sink

More Info
Highlighted Features
  • SINK PROTECTION
  • QUICK DRAINING
  • PREMIUM QUALITY
  • ECO-FRIENDLY
  • DIMENSIONS- 15.75”L X 11.88”W

 

This is designed to sit in the bottom of a compatible sink. It lets water through while blocking the drain. This should help stop small parts from going down the drain when it comes time for cleanup around your home brewery.

BINO Kitchen Sink Protector Mat, Clear – Eco-Friendly – Kitchen Sink Mat with Quick Draining Design – Kitchen Sink Mats for Stainless Steel Sink – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Shop around – search Amazon for Stainless Steel Sink Protector Mat

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

adamztop5

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

TWO x Stainless Carbonation Cap for PET Bottles by Luckeg + Fun With Carbonation Caps!

PET Bottles Beer Carbonation Cap 2 PCS - Counter Pressure Bottle Filling with 5/16" Barb, Carbonation Beer Soda Water Brewed Beer, Fits Most Soft Drink PET Bottles

PET Bottles Beer Carbonation Cap 2 PCS – Counter Pressure Bottle Filling with 5/16″ Barb, Carbonation Beer Soda Water Brewed Beer, Fits Most Soft Drink PET Bottles by Luckeg

More Info

Highlighted Features
  • Heavy Duty Stainless Steel for Carbonation Cap (2 PCS), Perfect Polishing Surface,with two four Food Grade Silicone Seal Rings;
  • Unique Machined the Carbonation Cap, can fit Both Black Liquid Ball Lock Disconnect and Grey Gas Ball Lock Disconnect;
  • The Carbonation Cap can fits Most Soft Drink PET Bottles, easy to Counter Pressure Bottle Fill PET Bottles;
  • The Carbonation Cap can Carbonate Various Beverages, including Soda, Beer, Juice, Water or Clean Beer Line;
  • Quality Guarantee: Any Defective for Carbonation Cap, Money Back or Replacement free.

 

Potential Uses:

  • PET Bottles as Growlers: These are generally intended to convert 1L and 2L bottles to growlers.  Fill up a 1L or 2L PET bottle with your favorite homebrew.  Put one of these on (purge the headspace by squeezing if you want to) and then pressurize for transport.  This should help to reduce oxygen pickup and maintain carbonation levels.
  • Fine tune or rapidly carbonate beer: You can also use this cap to rapidly carbonate beer.  Same process as for transport, just set your regulator to the proper pressure and shake or agitate the PET bottle to help introduce CO2.  Or hook it up to CO2 and let it sit in you kegerator.
  • Draft Line Cleaning Projects:  I have developed three draft line cleaning projects using similar SS Caps – Build A Recirculating Draft Line Cleaning Pump | Mark II Keg and Carboy Cleaner Draft Line Cleaning Pump ConversionBuilding a Simple Ball Lock Draft Line Flushing Setup
  • Related Top Post: Fun with Carbonation Caps!

PET Bottles Beer Carbonation Cap 2 PCS – Counter Pressure Bottle Filling with 5/16″ Barb, Carbonation Beer Soda Water Brewed Beer, Fits Most Soft Drink PET Bottles – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading

45 Bottle Drying Tree – storage, cleaning & sanitizing homebrew bottles

Learn to Brew 6B-TTW3-C14C 45 Beer Bottle Tree Décor, Red

45 position bottle tree

More Info


Highlighted Features
  • Dries 45 bottles
  • Top handle
  • Drainage collection tray
  • Beer and Wine Bottles

 

Use to help clean, sanitize dry and store your homebrew bottles.

Learn to Brew 6B-TTW3-C14C 45 Beer Bottle Tree Décor, Red – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Getting a Deal on Bottles for Your Homebrew

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

45 Bottle Drying Tree – storage, cleaning & sanitizing homebrew bottles

Learn to Brew 6B-TTW3-C14C 45 Beer Bottle Tree Décor, Red

45 position bottle tree

More Info


Highlighted Features
  • Dries 45 bottles
  • Top handle
  • Drainage collection tray
  • Beer and Wine Bottles

 

Use to help clean, sanitize dry and store your homebrew bottles.

Learn to Brew 6B-TTW3-C14C 45 Beer Bottle Tree Décor, Red – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Getting a Deal on Bottles for Your Homebrew

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Lyqily 400 GPH Utility Pump + Our Draft Line Cleaning Builds

Lyqily 400GPH Water Pump Ultra Quiet 25W Submersible Fountain Aquarium Fish Pond Hydroponic Pump with 6.6ft High Lift, 5.9ft Two-pin Plug Power Cord, 3 Nozzles(0.51"/0.63"/0.75")

Lyqily 400GPH Water Pump Ultra Quiet 25W Submersible Fountain Aquarium Fish Pond Hydroponic Pump with 6.6ft High Lift, 5.9ft Two-pin Plug Power Cord, 3 Nozzles(0.51″/0.63″/0.75″)

More Info


Highlighted Features
  • 【ADJUSTABLE】Designed with a adjusting knob, allowing to adjust the water flow rate.
  • 【STEADY STAY】Rubber suction cups can be a good fit in the glass surface, to help keep it stability.
  • 【CLEANABLE】No need any tools to detach it, easy to separate, easy to clean.
  • 【ULTRA-QUIET】Energy-saving low power, keep reliability and low noise operation, giving you quiet environment.
  • 【WIDELY USED】This submersible pump is perfect for aquariums, fountains, ponds and hydroponic systems, etc.


From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

Lyqily 400GPH Water Pump Ultra Quiet 25W Submersible Fountain Aquarium Fish Pond Hydroponic Pump with 6.6ft High Lift, 5.9ft Two-pin Plug Power Cord, 3 Nozzles(0.51″/0.63″/0.75″) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading

SiS Growler & Glass Cleaner

Growler & Glass Cleaner

Growler & Glass Cleaner

More Info


Highlighted Features
  • VERSATILE: The SIS Growler & Glass Cleaner is the perfect home brewery powder cleaning detergent to clean any and all growlers and glasses. From stainless steel, glass, ceramic and more, the Growler and Glass cleaner is fit to use for its sanitization.
  • HEAVY DUTY: No worries necessary when it comes to any leftover organic soils. The Growler & Glass Cleaner takes care of oils and a multitude of organic soils, even lipstick, leaving your growler and glasses as good as new and ready to safely use again.
  • LOW-FOAMING: Keep cleanup easy and stress-free with our low-foaming G&G Cleaner. Tough enough to work through any leftover oils and organic soils, but does not create an extra mess. Spend less time cleaning and more time getting ready for your next brew.
  • LONG-LASTING AND HARD-WORKING: Our Growler and Glass Cleaner formula is made for a little to go a long way for an even longer amount of time. Use the G&G Cleaner time and time again to penetrate and remove tough organic soils with effortless ease.
  • MADE IN USA: Sweetwater Innovative Solutions uphold products to the highest standard of quality, ensuring the finest brew. Proudly manufactured in a LEED Gold Certified facility in Knoxville, Tennessee, the SIS products are sustainable and excellent.

 

Growler & Glass Cleaner – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

BTF QA Food Surface Sanitizer, 32 Oz Concentrate – on sale for $12.99 at MoreBeer

BTF® QA® Sanitizer 32 oz - CDC Approved for Coronavirus CL21

BTF® QA® Sanitizer 32 oz from MoreBeer

More Info

From the product description, check product page for current description, price and availability:

Economical all purpose sanitizer, disinfectant, and deodorizer. Concentrated quaternary ammonium formula for use on most hard, nonporous surfaces: floors, walls, bathrooms, cabinets, plastic, stainless steel, porcelain, metal, and ceramic. Use in any public space – restaurants, schools, hospitals, hotels, institutions, and more. Also use to sanitize ice machines!

Highly concentrated. Use only 1/4 oz per gallon to sanitize food contact surfaces. Disinfect and deodorize other hard surfaces with only 3/4 oz per gallon.

COVID-19 is caused by SARS-CoV-2 virus. Q.A. Concentrated Solution from National Chemicals, Inc. kills similar viruses and therefore can be used against SARS-CoV-2 virus when used in accordance with the directions for use against Human Coronavirus on hard, non-porous surfaces. Refer to the CDC website at www.cdc.gov/coronavirus for additional information.

For disinfecting, which is the approved dilution for killing Coronavirus, contact time is 10 minutes.

Q.A. Concentrated Solution

Easy Household Mixing Conversion Chart

Disinfect at 625 ppm or higher


 

  • This is on sale for just $12.99.
  • Shipping is also free to addresses in the contiguous US with most $59 Orders.

BTF® QA® Sanitizer 32 oz

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

Stainless Steel Sink Protector Mat – Help Stop Small Parts from Going Down the Drain

BINO Kitchen Sink Protector Mat, Clear - Eco-Friendly - Kitchen Sink Mat with Quick Draining Design - Kitchen Sink Mats for Stainless Steel Sink

BINO Kitchen Sink Protector Mat, Clear – Eco-Friendly – Kitchen Sink Mat with Quick Draining Design – Kitchen Sink Mats for Stainless Steel Sink

More Info


Highlighted Features
  • SINK PROTECTION
  • QUICK DRAINING
  • PREMIUM QUALITY
  • ECO-FRIENDLY
  • DIMENSIONS- 15.75”L X 11.88”W

 

This is designed to sit in the bottom of a compatible sink. It lets water through while blocking the drain. This should help stop small parts from going down the drain when it comes time for cleanup around your home brewery.

BINO Kitchen Sink Protector Mat, Clear – Eco-Friendly – Kitchen Sink Mat with Quick Draining Design – Kitchen Sink Mats for Stainless Steel Sink – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Shop around – search Amazon for Stainless Steel Sink Protector Mat



This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

adamztop5

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

Craft Cleaning Chart – Contact Times, Dosage, Temperate and More for Star San, PBW and lots more

Updated: November 20, 2024

Resource Posts on PBW and Star San

I have resource posts on Star San and PBW that have loads of information, tips & tricks.

Star San and PBW Tips and Tricks

About Star San

Star San is my homebrew sanitizer of choice.  When mixed properly, it’s food safe and no rinse.  Required contact time is five minutes.  It has worked very well for me for quite some time and I’m convinced that it’s one of the most economical solutions available if you’re using the “Spray Bottle Method” outlined here.


starsanofferings


About PBW

Five Star Chemicals PBW – Powder Brewery Wash – is my go-to brewery cleaner. It is a non-hazardous buffered alkaline brewery cleaner and it… works great.



Five Star’s Craft Cleaning Chart PDF…

Continue reading

Lyqily 400 GPH Utility Pump + Our Draft Line Cleaning Builds

Lyqily 400GPH Water Pump Ultra Quiet 25W Submersible Fountain Aquarium Fish Pond Hydroponic Pump with 6.6ft High Lift, 5.9ft Two-pin Plug Power Cord, 3 Nozzles(0.51"/0.63"/0.75")

Lyqily 400GPH Water Pump Ultra Quiet 25W Submersible Fountain Aquarium Fish Pond Hydroponic Pump with 6.6ft High Lift, 5.9ft Two-pin Plug Power Cord, 3 Nozzles(0.51″/0.63″/0.75″)

More Info

Highlighted Features
  • 【ADJUSTABLE】Designed with a adjusting knob, allowing to adjust the water flow rate.
  • 【STEADY STAY】Rubber suction cups can be a good fit in the glass surface, to help keep it stability.
  • 【CLEANABLE】No need any tools to detach it, easy to separate, easy to clean.
  • 【ULTRA-QUIET】Energy-saving low power, keep reliability and low noise operation, giving you quiet environment.
  • 【WIDELY USED】This submersible pump is perfect for aquariums, fountains, ponds and hydroponic systems, etc.


From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

Lyqily 400GPH Water Pump Ultra Quiet 25W Submersible Fountain Aquarium Fish Pond Hydroponic Pump with 6.6ft High Lift, 5.9ft Two-pin Plug Power Cord, 3 Nozzles(0.51″/0.63″/0.75″) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading

MoreBeer (36″!) x 1/4″ Beer Line Cleaning Brush – $3.99, Limited Availability

Beer Line Cleaning Brush - 1/4 in. x 36 in.

Beer Line Cleaning Brush – 1/4 in. x 36 in via MoreBeer

More Info

From the product description, check product page for current description, price and availability:

You’ll never regret owning the right tool for the job!

This line brush is 1/4” in diameter and 36” long. You can use it to clean any 1/4” ID tubing in your brewery or draft setups. The long handle makes it convenient for long lengths of tubing.

Use it to clean:
Draft lines
Keg dip tubes
Down tube on your Cornelius keg
Racking canes
Any tube or line that is 1/4” in diameter


 

Limited Availability Deal of the Day: As of this posting, this is marked down to $3.99 as a MoreBeer Deal of the DayShipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

Beer Line Cleaning Brush – 1/4 in. x 36 in. CE45

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

TWO x Ferroday Stainless Carbonation Cap for PET Bottles – works on gas AND liquid posts

FERRODAY Stainless Steel Carbonation Cap Counter Pressure Bottle Filling 5/16 Barb CO2 Coupling to Carbonate Soda Beer Water Stainless Steel PET Bottle Filling Carbonation Cap & O-ring + Flat Gasket

FERRODAY Stainless Steel Carbonation Cap Counter Pressure Bottle Filling 5/16 Barb CO2 Coupling to Carbonate Soda Beer Water Stainless Steel PET Bottle Filling Carbonation Cap & O-ring + Flat Gasket

More Info


Highlighted Features
  • Heavy Duty Stainless Carbonation Cap: High quality stainless steel carbonation cap, well made for rust resistance and corrosion-proof. Would last for a long time in good condition. A must have equipment for homebrew Carbonation. For PCO1881/ 1 -1/8-8un PET Bottles, like most soft drink PET bottles
  • Great for Homebrew Carbonation/ Cleaning: This ball lock carbonation cap is most used for homemade beverage carbonation, and meanwhile it is great for cleaning beer/ soda/ water/ juice lines. Easy to set up
  • Easily Forced Carbonation Drinks: Ideal for forced carbonation drinks in bottles. Fit for most soft drink PET bottles. Just simply attach this cap with a PET bottle and a ball-lock gas disconnect to send CO2 into the bottle for beverage carbonation. Your homemade drinks will be right ready for drinkin
  • Food Safe Gasket/ No Leaks: We use premium material for the gaskets and o-rings. High resilient food safe rubber gaskets to seal against the threads and give you no leak connections! We updated our package with more o-rings and more gaskets for replacement
  • No Regrets Purchase: Stainless steel made carbonation cap. If any leaks, please change the O-ring or Gasket with the extra ones. We are committed to offering you high-quality products as well as superior service! Please let us know if there are any problems with this Stainless Steel Carbonation Cap, we will try our best to serve you. Provide technical support.


From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

Applications:

  • PET Bottles as Growlers: These are generally intended to convert 1L and 2L bottles to growlers.  Fill up a 1L or 2L PET bottle with your favorite homebrew.  Put one of these on (purge the headspace by squeezing if you want to) and then pressurize for transport.  This should help to reduce oxygen pickup and maintain carbonation levels.
  • Fine tune or rapidly carbonate beer: You can also use this cap to rapidly carbonate beer.  Same process as for transport, just set your regulator to the proper pressure and shake or agitate the PET bottle to help introduce CO2.  Or hook it up to CO2 and let it sit in you kegerator.
  • Draft Line Cleaning Projects:  I have developed three draft line cleaning projects using similar SS Caps – Build A Recirculating Draft Line Cleaning Pump | Mark II Keg and Carboy Cleaner Draft Line Cleaning Pump ConversionBuilding a Simple Ball Lock Draft Line Flushing Setup
  • Related Top Post: Fun with Carbonation Caps!

One of the questions that arises on these type of carb caps, is… does it work with both liquid and gas posts?  Some models are universal fit and some work only with gas posts.  For draft line cleaning projects to work well, at least in my opinion, the carb cap that’s used needs to be universal.  I’m happy to report that the one I received did indeed work with both liquid and ball lock posts.  Check the product description for current specs.

Check out my Hands on Review of this great carb cap.

FERRODAY Stainless Steel Carbonation Cap Counter Pressure Bottle Filling 5/16 Barb CO2 Coupling to Carbonate Soda Beer Water Stainless Steel PET Bottle Filling Carbonation Cap & O-ring + Flat Gasket  – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also Available in Single Count: Ferroday Stainless Carbonation Cap Counter Pressure Bottle Filling With 5/16″ Barb,CO2 Coupling To Carbonate Soda Beer Fruit Juice Water – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading

30 Pack Beer Faucet Plug Caps/Brushes

Beer Plugs Tap Brush,30 Pack Beer Faucet Tap Cleaning Plug Hygiene Brush For Draft Beer Faucet Cap

More Info


Highlighted Features
  • Convenient Cleaning- Our brush is great to keep your beer faucet clean.It fits with different kinds of beer tap sizes,helps to make cleaning tap become effortless and easy.
  • The wire can not be pulled out of the handle because of our Advanced welding process of the handle and wire.
  • High Quality - Featuring a new strengthening technology,the bristles of beer brushes are tightly entwined in twisted wire
  • Easy to Use - Simply insert the plug into your beer tap opening to keep your beer from dust and other contaminates.
  • Safe Material- Our brush handle is made of food grade polypropylene,the brush head is made of bristles

 

Beer Plugs Tap Brush,30 Pack Beer Faucet Tap Cleaning Plug Hygiene Brush For Draft Beer Faucet Cap (Blue) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Fun with Carbonation Caps!

Carbonation caps are available in a number of styles and materials from various manufacturers. These are generally designed to thread into standard 1L and 2L PET bottles.

Sourcing a Carbonation Cap

FERRODAY Stainless Steel Carbonation Cap Forced Carbonation PET Bottle Filling 5/16 Barb CO2 Coupling to Carbonate Soda Beer Stainless Steel PET Bottle Carbonation Cap + O-ring + GasketWorks with both liquid and gas (double check current specs to confirm) – Ferroday Stainless Carbonation Cap Counter Pressure Bottle Filling With 5/16″ Barb – Hands on Review

Tee Fittings

These caps along with tee fittings have proven to be very flexible. Here are some application ideas…

PET Bottles as Growlers:

Fill up a 1L or 2L PET bottle with your favorite homebrew.  Put one of these on (purge the headspace by squeezing if you want to) and then pressurize for transport.  This should help to reduce oxygen pickup and maintain carbonation levels.

Continue reading

50 Bottle Drying Tree – storage, cleaning & sanitizing homebrew bottles

North Mountain Supply - BTS-50 Screw Type Bottle Drying Tree - 50 Bottles Black/Red

50 position bottle tree

More Info


Highlighted Features
  • North Mountain Supply Screw Type Bottle Drying Tree 50 Bottles - Made in Italy!
  • Easily drain and dry your bottles after sanitizing and cleaning with our 50-Bottle Drying Tree
  • Just clean, rinse, sanitize and place bottles posts designed specifically for wine and beer bottles
  • Bottom drip tray collects water - Can be used to store extra bottles - Holds 50 bottles
  • Easily unscrews for storage - Our Bottle Rinser may be added to the top for easy sanitation prior to drying

 

Use to help clean, sanitize dry and store your homebrew bottles.

North Mountain Supply – BTS-50 Screw Type Bottle Drying Tree – 50 Bottles Black/Red – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Getting a Deal on Bottles for Your Homebrew

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

660 GPH Utility Pump by FREESEA + Draft Line Cleaning Builds

FREESEA 160-1100 GPH Submersible Water Pump for Pond Aquariums Hydroponics Fish Tank Garden Fountain Waterfall

FREESEA Submersible Water Pump

More Info


Highlighted Features
  • Powerful versatile: Our submersible water pump features an bottom inlet design that provides powerful suction, capable of pumping water as shallow as 5 mm. The 360° omnidirectional filter effectively removes debris and impurities ensuring thorough water circulation. With its detachable water outlet, it is suitable for various sizes of water pipes, making it versatile for different occasions such as fish tanks, ponds, aquariums, and hydroponic systems.
  • Intelligent Dry Heating Protection: The pond pump will stop from draining and pumping water, al long as the temperature reaches to 185 ℉(85℃), and the motor will restart working after the temperature goes down. This function can effectively reduce the damage caused by dry running.
  • Product Dimensions: This fountain water pump comes with 5.97ft power cord, and the max flow rate can be up to 660GPH, the max lift height can be up to 8.2FT.
  • Whisper-quiet and long-lasting: Our aquarium pump features an ultra-quiet motor that operates at less than 20 decibels, offering a quiet environment for your life. The fish tank pump durable and corrosion-resistant motor ensures a reliable performance, while the easy disassembly case of any blockage in the water inlet, simply clean it with fresh water before use, make maintenance a breeze.
  • Reliable performance and professional after-sales: Our small water pump with our 12-month 24-hour professional after-sales service, you can rest assured knowing that we are committed to providing exceptional customer support. If you have any questions or concerns about the water pump, please don't hesitate to reach out to us.


Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

FREESEA 660 GPH 40W Submersible Water Pump for Pond Aquarium Hydroponics Fish Tank Fountain Waterfall affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading

VIVOSUN 400 GPH Utility Pump + Draft Line Cleaning Builds

VIVOSUN 400GPH Submersible Pump(1500L/H, 15W), Ultra Quiet Water Pump with 5.3ft High Lift, Fountain Pump with 5ft Power Cord, 2 Nozzles for Fish Tank, Pond, Aquarium, Statuary, Hydroponics

VIVOSUN 400GPH Submersible Pump(1500L/H, 15W), Ultra Quiet Water Pump with 5.3ft High Lift, Fountain Pump with 5ft Power Cord, 2 Nozzles

More Info


Highlighted Features
  • Specifications: Dimensions: 4.1'' x 2.52'' x 2.95''; The 5-ft. long power cord offers convenient installation; Max. Flow Rate: 400 GPH (1500L/H); Max. Lift Height: up to 5.3 ft.; Wattage: 15W; Voltage: 110-120V
  • Detachable & Cleanable: This compact water pump is easy to hide or disguise and no additional tools are needed for disassembly and cleaning
  • A Variety of Outlet Positions: Place the pump flat and choose whichever outlet position suits your needs
  • Wide Range of Applications: High performance energy-efficient pump designed for use in ponds, fountains, waterfalls, hydroponic systems, irrigation systems and other water features
  • Warranty: Super durable & reusable, this pump comes with a 2-Year warranty; If you have any problems with the item you receive, please contact us without hesitation


From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

VIVOSUN 400GPH Submersible Pump(1500L/H, 15W), Ultra Quiet Water Pump with 5.3ft High Lift, Fountain Pump with 5ft Power Cord, 2 Nozzles for Fish Tank, Pond, Aquarium, Statuary, Hydroponics – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading

Goo Gone Pro Power, 32 oz + See it In Action in My Keg Rebuild Post

Goo Gone Pro-Power - Professional Strength Adhesive Remover - 32 Fl. Oz. Jug

Goo Gone Pro-Power – Professional Strength Adhesive Remover – 32 Fl. Oz. Jug

Helps with Reconditioning Kegs!

I use Goo Gone for a lot of thing including removing residual adhesive when I’m reconditioning a keg. The picture above is from my post on rebuilding kegsJump To: Section on Goo Gone – If you look through the post you’ll see just how good the keg looks at the end.

Goo Gone Pro-Power – Professional Strength Adhesive Remover – 32 Fl. Oz. Jug– affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.