Category Archives: CO2 Hardware

The Weekend Brewer 2-way MFL CO2 Manifold + Convert it to DuoTight!

The Weekend Brewer 2-way MFL CO2 Splitter Distributor Manifold with integrated check valves

The Weekend Brewer 2-way MFL CO2 Splitter Distributor Manifold with integrated check valves

More Info

From the product description, check product page for current description, price and availability:

  • Light and durable aluminum body is lighter than steel but remains Durable and long lasting. Aluminum is the industry standard for Co2 manifolds for their strength and resistance to corrosion. This manifold is ideal for homebrewers, bars, or anyone who is looking to easily split gas for beer or beverage dispensing and even for force carbonation.
  • Integrated high quality check valve outputs prevent liquid from flowing into the manifold and your regulator. Don’t worry about dirty lines or ruined regulators ever again! Every integrated check valve ensures that your beer stays on the right side of the line.
  • No leaks due to ample thread tape and vigorous water testing after assembly. All manifolds are internally cleaned before assembly for the purest air possible. Don’t settle for mass produced, low quality manifolds from overseas. The Weekend Brewer manifold is the highest quality manifold on the market due to rigorous testing and quality control.
  • Mounting holes allows for easy installation on walls or kegerators. Two screws or nails will easily secure your manifold to any surface for ease of use.
  • Made in the USA these manifolds are assembled by American workers in our fayetteville, AR facility.

 

 

CO2 manifolds allow you to feed multiple kegs off one co2 regulator.  Things to look for in a capable manifold are shut-off valves for each trunk and check valves.  Check valves makes sure flow goes the right directly.  This is important for CO2 manifolds because differences in pressure make it possible for liquid to back flow through gas lines.

I have two posts about the 4 way version of this manifold.  A Hands on Review and a walk-through to convert it to DuoTight.

The Weekend Brewer 2-way MFL CO2 Splitter Distributor Manifold with integrated check valves – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources
standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Build a DuoTight CO2 Gas Manifold! – for Kegland EVABarrier Tubing

duotightreview

FERRODAY Dual Gauge CO2 Draft Beer Regulator

FERRODAY Dual Gauge CO2 Draft Beer Regulator Dual Stage Pressure Regulator CGA-320 CO2 Tank Beer Kegerator Regulator with Relief Valve Beer Keg Pressure Regulator for Homebrew 0-60 PSI 0-3000PSI

FERRODAY Dual Gauge CO2 Draft Beer Regulator Dual Stage Pressure Regulator CGA-320 CO2 Tank Beer Kegerator Regulator with Relief Valve Beer Keg Pressure Regulator for Homebrew 0-60 PSI 0-3000PSI

More Info

Highlighted Features
  • Safety & No Leaks: FERRODAY CO2 keg pressure regulator features a heavy-duty forged brass body, well made connections, and exquisitely crafted pressure release valve to prevent any kind of gas leakage
  • Easy to Adjust by Hand: CO2 regulator has 2 control knobs, big adjustment knob enables more precise control even small adjustments, small shut-off knob allows instantly shut off without liquid backing up the gas line, easy to turn
  • Lock Ring to Hold PSI & Big Gauge Clear View: A lock ring under the big knob, so the knob can be firmly locked to hold your pressure setting. Two Big gauges always accurately show you the CO2 volume in the cylinder and the output pressure to keg. FERRODAY keg regulator has a clear view of pressure for a better homebrew experience
  • Pressure Release Valve & Filter: Safety first! A customized pressure release valve automatically releases pressures at about 50 psi for safety concerns. Also can be manually pulled out for pressure adjustment. A sintered metal filter in the stem keeps dirt out of the regulator
  • After-Sales Service: We are committed to offering you high-quality products as well as superior service! Please feel free to tell if any problem, we would try our best to satisfy you. Provide technical support
Learn More

 

FERRODAY Dual Gauge CO2 Regulator Beer Kegerator CO2 Regulator Beer Keg Dual-stage Kegerator Regulator CGA-320 Beer Regulator Co2 Kegerator Part Beer Keg Regulator Co2 Beer Gas Regulator Beer Tap Tool – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Pair 1/4″ Quick Disconnects w/Shut-Off (gas & liquid)

LucaSng Plastic Hose Quick Connector with Shut-Off,Gas and Liquid Quick Connector Check Valve Beer Line Tubing Quick Disconnect (1/4” Barb)LucaSng Plastic Hose Quick Connector with Shut-Off,Gas and Liquid Quick Connector Check Valve Beer Line Tubing Quick Disconnect (1/4” Barb)

More Info

From the product description, check product page for current description, price and availability:

  • This plastic quick disconnect set features 1/4″ barb.
  • Shutoffs(check valve) prevent leakage when disconnected.Use these high quality, food-grade quick-disconnects on your gas and beer tubing lines.
  • These couplings make it very easy to swap out couplers and other beer and air side accessories.
  • Made of Food-grade plastic with stainless steel springs and NSF approved.
  • The temperature range is -40F to 180F.They can handle a vacuum to 80 psi – so you need not worry about them leaking gas.

 

These are valved disconnects. When they are disengaged a shut off mechanism stops the flow of gas or liquid.

LucaSng Plastic Hose Quick Connector with Shut-Off,Gas and Liquid Quick Connector Check Valve Beer Line Tubing Quick Disconnect (1/4” Barb) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Compare: Beer & Gas Quick Connect – In-Line Set (With Shut-Off) H550 – similar concept, but not identical

duotightreview

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

2 Way CO2 Manifold w/Shutoffs & Check Valves

2-Way Gas Manifold CO2 Distributor Manifold 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves Homebrew Beer Making Brewing Tool

Two Way CO2 Manfiold.  Shut offs & built in check valves

More Info

From the product description, check product page for current description, price and availability:

  • 🍺 Gas Manifold, A built-in check valve protects your shunt and prevents gas back flow.
  • 🍺 Due to the one-way valve mechanism, the pressure drop between the ball valves in these manifolds is approximately 2 psi. You will need to set the pressure on the regulator to 2 psi above the pressure required in the keg.
  • 🍺 Run multiple lines from one CO2 source. The distributor allows you to split the gas supply into multiple lines. Each line has its own shutoff valve.
  • 🍺 There is a 2-point screw hole on the top for easy installation to other equipment. 5/16″ barbed inlet and 5/16″ barbed outlets.
  • 🍺 Made of aluminum, brass and stainless steel material, it is extremely durable.

 

Use to pressurize multiple kegs off one co2 regulator

2-Way Gas Manifold CO2 Distributor Manifold 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves Homebrew Beer Making Brewing Tool – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Taprite Brand Two Pressure Regulator, Made in the USA [multiple carbonation levels and more]

taprite dual pressure regulator

Two Pressure Regulator by Taprite

More Info


Highlighted Features
  • AT PRESENT WE DO NOT SHIP TO CALIFORNIA
  • Tap two kegs at the same time and control the pressure to each
  • 0-60 gauges measure pressure to each keg
  • 0-3000 gauge measures CO2 in tank
  • Nonadjustable "shut down" blows off at 55-65 PSI
Learn More

 

A two pressure regulator gives you the ability to keep kegs at different pressures.  This is a requirement to maintain two distinct carbonation levels.  It’s also handy if you want to force carbonate a keg more quickly, at a higher pressure, while maintaining your standard serving pressure on a keg that’s already being served or if you want to have a utility line for purging kegs and such.

As of this posting, Taprite products are Made in the USA.  See: About on Taprite’s Website for current information regarding country of origin.  Print screen 8/8/17

TapRite Separate Pressure Adjusting 2 Product CO2 Regulator – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Compare – similar models, may not be identical

Continue reading →

Taprite Brand Two Pressure Regulator, Made in the USA [multiple carbonation levels and more]

taprite dual pressure regulator

Two Pressure Regulator by Taprite

More Info


Highlighted Features
  • AT PRESENT WE DO NOT SHIP TO CALIFORNIA
  • Tap two kegs at the same time and control the pressure to each
  • 0-60 gauges measure pressure to each keg
  • 0-3000 gauge measures CO2 in tank
  • Nonadjustable "shut down" blows off at 55-65 PSI
Learn More

 

A two pressure regulator gives you the ability to keep kegs at different pressures.  This is a requirement to maintain two distinct carbonation levels.  It’s also handy if you want to force carbonate a keg more quickly, at a higher pressure, while maintaining your standard serving pressure on a keg that’s already being served or if you want to have a utility line for purging kegs and such.

As of this posting, Taprite products are Made in the USA.  See: About on Taprite’s Website for current information regarding country of origin.  Print screen 8/8/17

TapRite Separate Pressure Adjusting 2 Product CO2 Regulator – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Compare – similar models, may not be identical

Continue reading →

2 Way CO2 Manifold w/Shutoffs & Check Valves

Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold - Splitter 5/16" Barb Fittings (2 way 5/16" Barb)

Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold – Splitter 5/16″ Barb Fittings (2 way 5/16″ Barb)

More Info

From the product description, check product page for current description, price and availability:

  • The gas manifold body is made of high quality aluminum. The inlet barb & hexagon nut is made of brass. The switch valve is made of copper plated zinc.So our gas manifold is lighter & durable than steel
  • 2 way gas manifold allow you to supply CO2 for your several beer kegs. The gas manifold also provide the extra gas inlet for beer keg
  • 【No Leaks & Independent Shunt】: The integrated check valves can prevent backflow of gas or liquid and protect your splitter. Every switch valve has their handles to control the gas flow,so each gas line will not affect the airflow of other kegs
  • 【Easy To Use】: The gas manifold come with 5/16″ barb OD outlets & inlets. Inlet barb can connect with CO2 tank by hose. And the barb of shutoff valve can connect with your keg by hose to achieve carbonating beer
  • 【Faster To Install】:Just need two screws or nails,you can easily secure this gas manifold on walls or kegerators. A gas manifold can split the delivery of CO2 into several parts to serve the draft beer system

 

Use to pressurize multiple kegs off one co2 regulator.

Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold – Splitter 5/16″ Barb Fittings (2 way 5/16″ Barb) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Save via Cyber Monday Sale! KOMOS Gas Manifolds – Easy Conversion to DuoTight

KOMOS® Aluminum Gas Manifold – 1/4 in. Flare via MoreBeer

From the product description, check product page for current description, price and availability:

Gas manifolds are the best way to provide CO2 to multiple kegs inside your kegerator or keezer. The KOMOS manifold features 1/4″ flare gas inlet and check valves that provide much more flexibility compared to manifolds with barbed valves. Choose the type and size of draft tubing that you prefer. Use 1/4″ or 5/16″ gas line with the appropriate Flare Fitting Set (KEG607 or KEG640), or use EVABarrier—our draft line of choice—with the appropriately sized Duotight Fitting (DUO106 or DUO120).

You can also replace one or more of the check valves with a Ball Lock Post Bulkhead, which allows you to use a gas-in ball lock jumper line as a quick connect option.

Need something bigger than a 4-way manifold? No problem! With this 1/4″ Nipple, you can join multiple manifolds for as many outlets as you need.

Features:

  • 1/4″ Flare connections
  • 1/4″ BSP ball valves
  • Rated to 100 psi
  • Wall mount holes
  • Made from aluminum, brass, and stainless steel

[/expand]

 

All variations of these are on sale via MoreBeer’s soon ending Cyber Monday Sale. These can be hard to find in stock let alone on sale.

KOMOS® Aluminum Gas Manifold – 1/4 in. Flare

Check sale or product page for current availability & pricing

Convert to DuoTight!

Build a DuoTight CO2 Gas Manifold! – for Kegland EVABarrier Tubing

Want to Learn More about DuoTights and EVABarrier Tubing?  

duotightreview

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Four Way CO2 Manifold w/Shutoffs & Check Valves

4-Way Gas Manifold CO2 Distributor Manifold 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves Homebrew Beer Making Brewing Tool

4 way CO2 Manifold

From the product description, check product page for current description, price and availability:

  • Gas Manifold, A built-in check valve protects your shunt and prevents gas backflow.
  • Due to the one-way valve mechanism, the pressure drop between the ball valves in these manifolds is approximately 2 psi. You will need to set the pressure on the regulator to 2 psi above the pressure required in the keg.)
  • Run multiple lines from one CO2 source. The distributor allows you to split the gas supply into multiple lines. Each line has its own shutoff valve.
  • There is a 2-point screw hole on the top for easy installation to other equipment. 5/16″ barbed inlet and 5/16″ barbed outlets.

Use to pressurize multiple kegs off one co2 regulator.

4-Way Gas Manifold CO2 Distributor Manifold 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves Homebrew Beer Making Brewing Tool – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Mounting Board for DuoTight Inline Regulators – on sale from… $10.50 via William’s Brewing

Mounting Boards at William’s Brewing. Thank you to /u/skaht on reddit for this photo

Gas Board for Duotight In-Line Regulators via William’s Brewing

More Info

From the product description, check product page for current description, price and availability:

This sturdy food grade polypropylene board features drilled holes for up to 4 Duotight Regulators (item C11). Drilled mounting holes are also included so that once you mount the regulators and DuoTight fittings/tubing to the board, you can also install the board in a convenient location. Also included are cutout boxes so you can line up 4 labels above the regulators.

Note that pictured regulators, screws, Duotight fittings, labels, and EvaBarrier tubing are not included. This is just a base board. 12″ wide, 10.25″ tall, and 3/8″ thick.

 

This allows you to easily mount multiple Duotight In-Line Regulators.  Those regulators allow you to easily (and cheaply) set individual pressures and carbonation levels.

The DuoTight lineup is awesome… Hands on Review: DuoTight Fittings & EVABarrier Tubing!

Polypropylene Gas Board for 4 Inline Regulators

Polypropylene Gas Board for 6 Inline Regulators

Clearance Sale at William’s Brewing!

Check sale or product page for current availability & pricing

More DuoTight!

duotightreview

Continue reading →

3 Way CO2 Manifold – $22.99, Limited Availability + Our Top Draft Resources

Gas Manifold - 1/4 in. (Aluminum) D1807

Gas Manifold – 1/4 in. (Aluminum) from MoreBeer

Use to serve multiple kegs in our kegerator using a single tank and regulator

More Info

From the product description, check product page for current description, price and availability:

Manifolds are a great way to have one CO2 tank supply multiple kegs. This manifold is made from aluminum, brass, and stainless. It also works up to 100 psi and includes 1/4 in ball valves with built in check valves. Another ball valve can be added to the end of the manifold for an additional gas line.

  • 1/4 in ball valves
  • Rated up to 100 psi
  • Screw holes for easy mounting
  • Optional additional port on the end

 

Limited Availability Deal of the Day: As of this posting, this is marked down to $22.99 as a MoreBeer Deal of the Day. Shipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Why This is a Great Deal: My general rule of thumb for what constitutes a good deal on a CO2 manifold is anything less than $10 per trunk.  This one is selling for $22.99.  That figures to just $7.63 per trunk.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

Note: I’ve seen the product page show the wrong version of this manifold.  Just look double check the description to make sure you’re getting the correct three way manifold.

Gas Manifold – 1/4 in. (Aluminum) D1807

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

2 Way CO2 Manifold w/Shutoffs & Check Valves

2-Way Gas Manifold CO2 Distributor Manifold 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves Homebrew Beer Making Brewing Tool

Two Way CO2 Manfiold.  Shut offs & built in check valves

More Info

From the product description, check product page for current description, price and availability:

  • 🍺 Gas Manifold, A built-in check valve protects your shunt and prevents gas back flow.
  • 🍺 Due to the one-way valve mechanism, the pressure drop between the ball valves in these manifolds is approximately 2 psi. You will need to set the pressure on the regulator to 2 psi above the pressure required in the keg.
  • 🍺 Run multiple lines from one CO2 source. The distributor allows you to split the gas supply into multiple lines. Each line has its own shutoff valve.
  • 🍺 There is a 2-point screw hole on the top for easy installation to other equipment. 5/16″ barbed inlet and 5/16″ barbed outlets.
  • 🍺 Made of aluminum, brass and stainless steel material, it is extremely durable.

 

Use to pressurize multiple kegs off one co2 regulator

2-Way Gas Manifold CO2 Distributor Manifold 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves Homebrew Beer Making Brewing Tool – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Pair 1/4″ Quick Disconnects w/Shut-Off (gas & liquid)

LucaSng Plastic Hose Quick Connector with Shut-Off,Gas and Liquid Quick Connector Check Valve Beer Line Tubing Quick Disconnect (1/4” Barb)LucaSng Plastic Hose Quick Connector with Shut-Off,Gas and Liquid Quick Connector Check Valve Beer Line Tubing Quick Disconnect (1/4” Barb)

More Info

From the product description, check product page for current description, price and availability:

  • This plastic quick disconnect set features 1/4″ barb.
  • Shutoffs(check valve) prevent leakage when disconnected.Use these high quality, food-grade quick-disconnects on your gas and beer tubing lines.
  • These couplings make it very easy to swap out couplers and other beer and air side accessories.
  • Made of Food-grade plastic with stainless steel springs and NSF approved.
  • The temperature range is -40F to 180F.They can handle a vacuum to 80 psi – so you need not worry about them leaking gas.

 

These are valved disconnects. When they are disengaged a shut off mechanism stops the flow of gas or liquid.

LucaSng Plastic Hose Quick Connector with Shut-Off,Gas and Liquid Quick Connector Check Valve Beer Line Tubing Quick Disconnect (1/4” Barb) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Compare: Beer & Gas Quick Connect – In-Line Set (With Shut-Off) H550 – similar concept, but not identical

duotightreview

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

2 Way CO2 Manifold w/Shutoffs & Check Valves

Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold - Splitter 5/16" Barb Fittings (2 way 5/16" Barb)

Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold – Splitter 5/16″ Barb Fittings (2 way 5/16″ Barb)

More Info

From the product description, check product page for current description, price and availability:

  • The gas manifold body is made of high quality aluminum. The inlet barb & hexagon nut is made of brass. The switch valve is made of copper plated zinc.So our gas manifold is lighter & durable than steel
  • 2 way gas manifold allow you to supply CO2 for your several beer kegs. The gas manifold also provide the extra gas inlet for beer keg
  • 【No Leaks & Independent Shunt】: The integrated check valves can prevent backflow of gas or liquid and protect your splitter. Every switch valve has their handles to control the gas flow,so each gas line will not affect the airflow of other kegs
  • 【Easy To Use】: The gas manifold come with 5/16″ barb OD outlets & inlets. Inlet barb can connect with CO2 tank by hose. And the barb of shutoff valve can connect with your keg by hose to achieve carbonating beer
  • 【Faster To Install】:Just need two screws or nails,you can easily secure this gas manifold on walls or kegerators. A gas manifold can split the delivery of CO2 into several parts to serve the draft beer system

 

Use to pressurize multiple kegs off one co2 regulator.

Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold – Splitter 5/16″ Barb Fittings (2 way 5/16″ Barb) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Four Way CO2 Manifold w/Shutoffs & Check Valves

4-Way Gas Manifold CO2 Distributor Manifold 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves Homebrew Beer Making Brewing Tool

4 way CO2 Manifold

From the product description, check product page for current description, price and availability:

  • Gas Manifold, A built-in check valve protects your shunt and prevents gas backflow.
  • Due to the one-way valve mechanism, the pressure drop between the ball valves in these manifolds is approximately 2 psi. You will need to set the pressure on the regulator to 2 psi above the pressure required in the keg.)
  • Run multiple lines from one CO2 source. The distributor allows you to split the gas supply into multiple lines. Each line has its own shutoff valve.
  • There is a 2-point screw hole on the top for easy installation to other equipment. 5/16″ barbed inlet and 5/16″ barbed outlets.

Use to pressurize multiple kegs off one co2 regulator.

4-Way Gas Manifold CO2 Distributor Manifold 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves Homebrew Beer Making Brewing Tool – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Mounting Board for DuoTight Inline Regulators – on sale from… $10.50 via William’s Brewing

Mounting Boards at William’s Brewing. Thank you to /u/skaht on reddit for this photo

Gas Board for Duotight In-Line Regulators via William’s Brewing

More Info

From the product description, check product page for current description, price and availability:

This sturdy food grade polypropylene board features drilled holes for up to 4 Duotight Regulators (item C11). Drilled mounting holes are also included so that once you mount the regulators and DuoTight fittings/tubing to the board, you can also install the board in a convenient location. Also included are cutout boxes so you can line up 4 labels above the regulators.

Note that pictured regulators, screws, Duotight fittings, labels, and EvaBarrier tubing are not included. This is just a base board. 12″ wide, 10.25″ tall, and 3/8″ thick.

 

This allows you to easily mount multiple Duotight In-Line Regulators.  Those regulators allow you to easily (and cheaply) set individual pressures and carbonation levels.

The DuoTight lineup is awesome… Hands on Review: DuoTight Fittings & EVABarrier Tubing!

Polypropylene Gas Board for 4 Inline Regulators

Polypropylene Gas Board for 6 Inline Regulators

Clearance Sale at William’s Brewing!

Check sale or product page for current availability & pricing

More DuoTight!

duotightreview

Continue reading →

Two Pressure CO2 Regulator [multiple carbonation levels and more]

MOD Complete MDC99007 CO2 Beer Regulator Dual Pressure

More Info

 

Why a two pressure regulator?  A two pressure regulator gives you the ability to keep kegs at different pressures.  This is a requirement to maintain two distinct carbonation levels.  It’s also handy if you want to force carbonate a keg more quickly, at a higher pressure, while maintaining your standard serving pressure on a keg that’s already being served or if you want to have a utility line for purging kegs and such.

MOD Complete MDC99007 CO2 Beer Regulator Dual Pressure Kegerator Heavy Duty Features T-Style Adjusting Handle – 0 to 60 PSI-0-3000 Tank Pressure CGA-320 Inlet w/ 3/8″ O.D. Safety Discharge 50-55 PSI – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Yaebrew FIVE Way CO2 Manifold w/Shutoffs & Check Valves

YaeBrew Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold 5/16" - 5 Way

5 way CO2 Manifold by YaeBrew

From the product description, check product page for current description, price and availability:

  • 5/16” barbed inlets and outlets
  • Shutoffs with built-in check valves
  • YaeBrew Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold 5/16″ – 5 Way

Use to pressurize multiple kegs off one co2 regulator.

YaeBrew Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold 5/16″ – 5 Way – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

2 Way CO2 Manifold w/Shutoffs & Check Valves

2-Way Gas Manifold CO2 Distributor Manifold 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves Homebrew Beer Making Brewing Tool

Two Way CO2 Manfiold.  Shut offs & built in check valves

More Info

From the product description, check product page for current description, price and availability:

  • 🍺 Gas Manifold, A built-in check valve protects your shunt and prevents gas back flow.
  • 🍺 Due to the one-way valve mechanism, the pressure drop between the ball valves in these manifolds is approximately 2 psi. You will need to set the pressure on the regulator to 2 psi above the pressure required in the keg.
  • 🍺 Run multiple lines from one CO2 source. The distributor allows you to split the gas supply into multiple lines. Each line has its own shutoff valve.
  • 🍺 There is a 2-point screw hole on the top for easy installation to other equipment. 5/16″ barbed inlet and 5/16″ barbed outlets.
  • 🍺 Made of aluminum, brass and stainless steel material, it is extremely durable.

 

Use to pressurize multiple kegs off one co2 regulator

2-Way Gas Manifold CO2 Distributor Manifold 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves Homebrew Beer Making Brewing Tool – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Finally In Stock… KOMOS Gas Manifolds – Easy Conversion to DuoTight

KOMOS® Aluminum Gas Manifold – 1/4 in. Flare via MoreBeer

From the product description, check product page for current description, price and availability:

Due to high demand, the 3 & 4 way manifold is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more inventory.

Gas manifolds are the best way to provide CO2 to multiple kegs inside your kegerator or keezer. The KOMOS manifold features 1/4″ flare gas inlet and check valves that provide much more flexibility compared to manifolds with barbed valves. Choose the type and size of draft tubing that you prefer. Use 1/4″ or 5/16″ gas line with the appropriate Flare Fitting Set (KEG607 or KEG640), or use EVABarrier—our draft line of choice—with the appropriately sized Duotight Fitting (DUO106 or DUO120).

You can also replace one or more of the check valves with a Ball Lock Post Bulkhead, which allows you to use a gas-in ball lock jumper line as a quick connect option.

Need something bigger than a 4-way manifold? No problem! With this 1/4″ Nipple, you can join multiple manifolds for as many outlets as you need.

Features:

  • 1/4″ Flare connections
  • 1/4″ BSP ball valves
  • Rated to 100 psi
  • Wall mount holes
  • Made from aluminum, brass, and stainless steel

[/expand]

 

  • These have been out of stock for a long, long time. As of this posting, they’re back in stock. Check the product page to see if you can still get in on this shipment.
  • Get Free Shipping: Shipping is free with a qualifying $59 order to many US addresses
  • Some filler item ideas to help you qualify for free shipping… PBW, Sale Items (shows most popular deals first), Kit of the Week, Hop Market (shows most popular deals first)

KOMOS® Aluminum Gas Manifold – 1/4 in. Flare

Convert to DuoTight!

Build a DuoTight CO2 Gas Manifold! – for Kegland EVABarrier Tubing

Want to Learn More about DuoTights and EVABarrier Tubing?  

duotightreview

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer