Category Archives: CO2 Hardware

5 lb CO2 Tank with CGA 320 Valve + Our Top Kegerator Resources

5 lb. Aluminum CO2 Cylinder

From the product description, check product page for current description, price and availability:

  • 1800 PSI service pressure
  • Brushed aluminum external surface provides a low-maintenance finish
  • New CGA320 valve

This tank is high-quality aluminum construction, has thick, damage-resistant walls, new CGA320 valve, standard for CO2, DOT and TC approved. It has 5.25″ diameter and 18.25″ tall including valve.

Compare: D1050 5 lb CO2 Tank at MoreBeer – similar but not identical

5 lb. Aluminum CO2 Cylinder with CGA 320 Valve


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Zebra DNA Luxfer L6X Aluminum CO2 Tank

Zebra DNA Luxfer L6X Aluminum CO2 Tanks with CGA320 on/off Valve (Natural, 5 LB)

From the product description, check product page for current description, price and availability:

  • Cylinders are made from Luxfer’s exclusive L6X® alloy, a proprietary version of 6061-T6 specially optimized by Luxfer metallurgists to improve its durability, fracture toughness and resistance to tearing and cracking. More than 40 million L6X cylinders in service around the world have an exemplary record for safety and dependability.
  • Highly corrosion-resistant interior and exterior—ideal for wet gases
  • Cylinders perform well at low temperatures.
  • Lightweight––up to 40 percent lighter than comparable steel cylinders.
  • Consistent weight.
  • Thick, consistent walls resist damage.

What are others saying?  Search this tank’s Amazon reviews for “kegerator”

Zebra DNA Luxfer L6X Aluminum CO2 Tanks with CGA320 on/off Valve (Natural, 5 LB)


Compare: D1050 5 lb CO2 Tank via MoreBeer – similar, but not identical

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

4 Way CO2 Manifold [Serve Multiple Kegs]

4 Way CO2 Manifold.  Aluminum body.  5/16″ Barbs.  Each trunk has a ball valve and integrated check valves.  Check valves stop beer or other liquids from back feeding into other lines or your regulator.

Use to pressurize multiple kegs off one co2 regulator.

Update: Since this post was published the price, availability or promotion has changed.  Check the product page for current description, price and availability.  Also: Today’s Deals on Amazon

Air Distributor 5/16″, CO2 Manifold (Select 2 , 3 or 4 Way) (4 Way)

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

4 Way CO2 Manifold [Serve Multiple Kegs]

4 Way CO2 Manifold.  Aluminum body.  5/16″ Barbs.  Each trunk has a ball valve and integrated check valves.  Check valves stop beer or other liquids from back feeding into other lines or your regulator.

Use to pressurize multiple kegs off one co2 regulator.

Update: Since this post was published the price, availability or promotion has changed.  Check the product page for current description, price and availability.  Also: Today’s Deals on Amazon

Air Distributor 5/16″, CO2 Manifold (Select 2 , 3 or 4 Way) (4 Way)

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Dual Gauge Fermentap CO2 Regulator – $36.99 + Tips and Gear for Your Kegerator

Dual Gauge CO2 Regulator - Fermentap

Fermentap CO2 regulator from MoreBeer.

More Info

From the product description, check product page for current description, price and availability:

“If you’re searching for an economical CO2 regulator that still offers reliable performance and great durability, this Fermentap Dual Gauge CO2 Regulator is just the thing.

This CO2 regulator regulator features hand-adjustable pressure that doesn’t require any tools, as well as a built-in tank gasket so that you won’t have to change the tank without one. The 30 PSI low pressure gauge offers a more precise range for dispensing beer at home when compared to the standard 60 PSI gauge, and the built-in pressure relief valve blows off at 40 PSI for added safety. With its chrome-plated brass construction, this Fermentap Dual Gauge CO2 Regulator will offer years of rust-free, reliable use.”  [full description]

 

Also: Tips & Gear for Your Kegerator

Product Description – Here – Use coupon code BEERDEAL to get this discount.

Availability: This is a More Beer Deal of the Day. Quantities are limited. Check the Deal of the Day section – Here – to see if this is still available.

Dual Gauge CO2 Regulator – Fermentap D1064 – $44.99 $36.99 + Free Shipping with a $59 order

This ships for free as part of MoreBeer’s Free Shipping Promo.  Grab your next recipe kit – See: BrewMaster Series – Brewing Pliny, some gear, something that’s on sale or clearance and put together a $59 order to get free shipping.

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

MoreBeer’s Deal of the Day – 2 Way Expandable CO2 Manifold System + Review

co2 manifold

This manifold allows you to split a single tank into multiple runs and control each with an independent ball valve.  Each ball valve also contains a check valve that stops one beer from backflowing into another line.  Pressure changes can cause this to happen with a simple T-type system.  This manifold prevents the issue.  This system can also expand as needed by adding an additional outlet.  Check out my Hands on Review of this great system.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

Availability: This is a More Beer Deal of the Day. Quantities are limited. Check the Deal of the Day section – Here – to see if this is still available.

Gas Manifold – 2 Way D1800 – $29.99 $23.99 + Free Shipping with a $59 order

This ships for free as part of MoreBeer’s Free Shipping Promo.  Grab your next recipe kit – See: BrewMaster Series – Brewing Pliny, some gear, something that’s on sale or clearance and put together a $59 order to get free shipping.

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

4 Way CO2 Manifold [Serve Multiple Kegs]

4 Way CO2 Manifold.  Aluminum body.  5/16″ Barbs.  Each trunk has a ball valve and integrated check valves.  Check valves stop beer or other liquids from back feeding into other lines or your regulator.

Use to pressurize multiple kegs off one co2 regulator.

Update: Since this post was published the price, availability or promotion has changed.  Check the product page for current description, price and availability.  Also: Today’s Deals on Amazon

Air Distributor 5/16″, CO2 Manifold (Select 2 , 3 or 4 Way) (4 Way)

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Taprite Two Pressure Regulator, Made in the USA [multiple carbonation levels and more]

taprite dual pressure regulator

Two Pressure Regulator by Taprite

More Info


Highlighted Features
  • AT PRESENT WE DO NOT SHIP TO CALIFORNIA
  • Tap two kegs at the same time and control the pressure to each
  • 0-60 gauges measure pressure to each keg
  • 0-3000 gauge measures CO2 in tank
  • Nonadjustable "shut down" blows off at 55-65 PSI
Learn More

 

A two pressure regulator gives you the ability to keep kegs at different pressures.  This is a requirement to maintain two distinct carbonation levels.  It’s also handy if you want to force carbonate a keg more quickly, at a higher pressure, while maintaining your standard serving pressure on a keg that’s already being served or if you want to have a utility line for purging kegs and such.

As of this posting, Taprite products are Made in the USA.  See: About on Taprite’s Website for current information regarding country of origin.  Print screen 8/8/17

TapRite Separate Pressure Adjusting 2 Product CO2 Regulator – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Compare – similar models, may not be identical

Continue reading →

Dual Body, Two Pressure CO2 Regulator – $112.99

CO2 Regulator - Dual Body - Three Gauge

Triple Gauge, Dual Pressure Primary CO2 Regulator made by Taprite in the USA.  Features 5/16″ barbs that should work with both 5/16″ and 1/4″ ID Tubing.  High quality… Taprite is the leading regulator manufacturer in the US.

Benefits of a two pressure regulator… 1. Serve different beers at different pressures/carbonation levels, 2.  Serve and carbonate at different pressures (one “house” pressure, and another higher pressure for quickly carbonating) and 3.  Use one regulator for a house pressure and the second for utility functions such as purging kegs and carboys and transferring under pressure.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

CO2 Regulator – Dual Body – Three Gauge D1065 – $135.99 $112.99 + Free Shipping

Availability: This is a More Beer Deal of the Day. Quantities are limited. Check the Deal of the Day section – Here – to see if this is still available.

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft


pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

4 Way CO2 Manifold [Serve Multiple Kegs]

4 Way CO2 Manifold.  Aluminum body.  5/16″ Barbs.  Each trunk has a ball valve and integrated check valves.  Check valves stop beer or other liquids from back feeding into other lines or your regulator.

Use to pressurize multiple kegs off one co2 regulator.

Update: Since this post was published the price, availability or promotion has changed.  Check the product page for current description, price and availability.  Also: Today’s Deals on Amazon

Air Distributor 5/16″, CO2 Manifold (Select 2 , 3 or 4 Way) (4 Way)

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

3 Way Expandable CO2 Manifold – $31.99, Limited Supply + Hands on Review

1057

3 Way Expandable CO2 Manifold.  Each connection has a check valve and a shut off valve.  For gas, I prefer barbs over flare connections.  This has 5/16″ barbs but you can also use 1/4″ ID tubing.  There aren’t a lot of things in homebrewing that grow with you.  For example, when you get ready to go from concentrated boils to full extract boils, you cannot buy an add on for your 4 gallon kettle . 🙂  This manifold is an exception, if the need arises, you can get an add-on and expand this manifold.  Check out my Hands on Review of this great system

Product Description – Here – Use coupon code BEERDEAL to get this discount.

Availability: This is a More Beer Deal of the Day. Quantities are limited. Check the Deal of the Day section – Here – to see if this is still available.

Gas Manifold – 3 Way D1805 – $38.99 $31.99 + Free Shipping with $59 Order

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Taprite T752HP Dual Pressure Kegerator CO2 Regulator [multiple carbonation levels and more]

Taprite T752HP Two Product Dual Pressure CO2 Regulator by Taprite

More Info

From the product description, check product page for current description, price and availability:

  • Large easy adjusting knob to increase or decrease delivery pressure
  • Each regulator has a sentry shut-down safety built into the body that instantly protects the dispensing system in the unlikely event of regulator failure
  • Outlet features shut-off with back flow check valve and 5/16″ I.D. hose barb nipple
  • Permanent quad-ring seal on inlet nipple helps eliminate leaks, no need to use a fiber washer each time tanks are changed
  • Blow-off is factory set at 55-65 psig

 

A two pressure regulator gives you the ability to keep kegs at different pressures.  This is a requirement to maintain two distinct carbonation levels.  It’s also handy if you want to force carbonate a keg more quickly, at a higher pressure, while maintaining your standard serving pressure on a keg that’s already being served or if you want to have a utility line for purging kegs and such.

As of this posting, Taprite products are Made in the USA.  See: About on Taprite’s Website for current information regarding country of origin.  Print screen 8/8/17

What are other people saying? Search this product’s Amazon reviews for “kegerator”

Taprite T752HP Two Product Dual Pressure Kegerator Co2 Regulator


Shop Around – Compare at MoreBeer – similar, but may not be identical

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

prod:B0060NOX40

4 Way CO2 Manifold [Serve Multiple Kegs]

4 Way CO2 Manifold.  Aluminum body.  5/16″ Barbs.  Each trunk has a ball valve and integrated check valves.  Check valves stop beer or other liquids from back feeding into other lines or your regulator.

Use to pressurize multiple kegs off one co2 regulator.

Update: Since this post was published the price, availability or promotion has changed.  Check the product page for current description, price and availability.  Also: Today’s Deals on Amazon

Air Distributor 5/16″, CO2 Manifold (Select 2 , 3 or 4 Way) (4 Way)

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

MoreBeer 20 lb CO2 Tank – $130 + Free Shipping + Tank Tip

Aluminum 20 lb CO2 Tank D1052

Brand new 20 lb aluminum CO2 tank from MoreBeer.  Aluminum will not rust.  Tank is shipped empty.

More Info

From the product description, check product page for current description, price and availability:

Brand new aluminum 20 lb CO2 tank made from high strength aluminum allowy and high quality CGA320 valves. Because it is made of aluminum rather than steel you can feel confident that it won’t rust. It’s called a 20lb tank because it holds 20lb of compressed (liquified) CO2. 20lb of CO2 is enough to dispense about 40×5 gallon kegs of homebrew.

Features:

Made from corrosion resistant, engineered Aluminum
Brushed finish
Thick, durable cylinder walls
8″ Diameter by 27.25″ Overall height with handle
DOT approved
New high quality CGA-320 valve
Light weight compared to steel tanks

 

Tip: Get a big CO2 tank.  At my supplier, it costs around $20 to swap out an empty 5 lb tank.  It costs around $25 to swap out an empty 20 lb tank.  It’s more than 3 times the cost to refill the smaller tank!  This will pay for itself quickly both in time and money.

As of this posting, MoreBeer has this on sale for just $130. Shipping is free with a qualifying $59 order to many US addresses. Price, promotions and availability can change quickly.  Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this this post was published; however, they may differ from those you see when you visit the product page.  Check the product page for current price, description and availability.

Aluminum 20 lb CO2 Tank D1052

Check sale or product page for current availability & pricing


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Taprite Two Pressure Regulator, Made in the USA [multiple carbonation levels and more]

taprite dual pressure regulator

Two Pressure Regulator by Taprite

More Info


Highlighted Features
  • AT PRESENT WE DO NOT SHIP TO CALIFORNIA
  • Tap two kegs at the same time and control the pressure to each
  • 0-60 gauges measure pressure to each keg
  • 0-3000 gauge measures CO2 in tank
  • Nonadjustable "shut down" blows off at 55-65 PSI
Learn More

 

A two pressure regulator gives you the ability to keep kegs at different pressures.  This is a requirement to maintain two distinct carbonation levels.  It’s also handy if you want to force carbonate a keg more quickly, at a higher pressure, while maintaining your standard serving pressure on a keg that’s already being served or if you want to have a utility line for purging kegs and such.

As of this posting, Taprite products are Made in the USA.  See: About on Taprite’s Website for current information regarding country of origin.  Print screen 8/8/17

TapRite Separate Pressure Adjusting 2 Product CO2 Regulator – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Compare – similar models, may not be identical

Continue reading →

Hands On Review: MoreBeer’s Expandable CO2 Manifold System

morebeer co2 manifold review

Updated: 5/17/2024

Hands on Review MoreBeer CO2 Manifold System

MoreBeer’s gas CO2 manifold system comes in a variety of sizes including 2, 3, 4 and 6 way variants.  An add-on is also available that allows you to add more runs to the manifold as you have need.

I have long extolled the virtues of this system.  This is one of a few things in homebrewing that can actually grow with you.  Example – I could not add 4 gallons to my 6 gallon extract kettle.  I had to replace it.  This system actually grows with you.  Here is a hands on look.

Continue reading →

MoreBeer’s Deal of the Day – 2 Way Expandable CO2 Manifold System

co2 manifold

This manifold allows you to split a single tank into multiple runs and control each with an independent ball valve.  Each ball valve also contains a check valve that stops one beer from backflowing into another line.  Pressure changes can cause this to happen with a simple T-type system.  This manifold prevents the issue.  This system can also expand as needed by adding an additional outlet.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

Availability: This is a More Beer Deal of the Day. Quantities are limited. Check the Deal of the Day section – Here – to see if this is still available.

Gas Manifold – 2 Way D1800 – $23.99 + Free Shipping with a $59 order

This ships for free as part of MoreBeer’s Free Shipping Promo.  Grab your next recipe kit – See: BrewMaster Series – Brewing Pliny, some gear, something that’s on sale or clearance and put together a $59 order to get free shipping.

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

4 Way CO2 Manifold [Serve Multiple Kegs]

4 Way CO2 Manifold.  Aluminum body.  5/16″ Barbs.  Each trunk has a ball valve and integrated check valves.  Check valves stop beer or other liquids from back feeding into other lines or your regulator.

Use to pressurize multiple kegs off one co2 regulator.

Update: Since this post was published the price, availability or promotion has changed.  Check the product page for current description, price and availability.  Also: Today’s Deals on Amazon

Air Distributor 5/16″, CO2 Manifold (Select 2 , 3 or 4 Way) (4 Way)

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Brand New 5 lb CO2 Tank from MoreBeer – $72.99 + Free Shipping, Limited Availability

CO2 Tank (Aluminum) - 5 lb. D1050

5 lb CO2 from MoreBeer

More Info

From the product description, check product page for current description, price and availability:

A new 5 lb CO2 tank is one of the required purchases when you’re changing over from bottling to kegging your beer.

This brand new 5 lb aluminum CO2 tank ships free in the 48 contigous states. Aluminum tanks will never rust, which is why we prefer them over steel tanks. The capacity refers to the amount of compressed (liquified) CO2 the tank can hold. 5 lbs of CO2 is enough to dispense 8 to 9 5-gallon kegs of homebrew.

All new CO2 tanks are shipped empty and will require either filling or exchanging for a full tank. Most local homebrew shops will stock gas to exchange, and many local welding supply companies can fill tanks on site.

CO2 tanks should always be stored in an upright position.

Dimensions: 14.33″ Tall x 5.25″ wide.

Limited Availability Deal of the Day: As of this posting, this on sale as as a MoreBeer Deal of the Day. Shipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

CO2 Tank (5 lb) D1050

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. prod:D1050

4 Way CO2 Manifold [Serve Multiple Kegs]

4 Way CO2 Manifold.  Aluminum body.  5/16″ Barbs.  Each trunk has a ball valve and integrated check valves.  Check valves stop beer or other liquids from back feeding into other lines or your regulator.

Use to pressurize multiple kegs off one co2 regulator.

Update: Since this post was published the price, availability or promotion has changed.  Check the product page for current description, price and availability.  Also: Today’s Deals on Amazon

Air Distributor 5/16″, CO2 Manifold (Select 2 , 3 or 4 Way) (4 Way)

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon