Category Archives: CO2 Hardware

Dual Body, Two Pressure CO2 Regulator – $119.99

CO2 Regulator - Dual Body - Three Gauge

Triple Gauge, Dual Pressure Primary CO2 Regulator made by Taprite in the USA.  Features 5/16″ barbs that should work with both 5/16″ and 1/4″ ID Tubing.  High quality… Taprite is the leading regulator manufacturer in the US.

Benefits of a two pressure regulator… 1. Serve different beers at different pressures/carbonation levels, 2.  Serve and carbonate at different pressures (one “house” pressure, and another higher pressure for quickly carbonating) and 3.  Use one regulator for a house pressure and the second for utility functions such as purging kegs and carboys and transferring under pressure.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

CO2 Regulator – Dual Body – Three Gauge D1065 – $135.99 $119.99 + Free Shipping

Availability: This is a More Beer Deal of the Day. Quantities are limited. Check the Deal of the Day section – Here – to see if this is still available.

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources
standarddraft

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Gas Quick Disconnects with Built in Shut Off Valves

Colder PLCD17004 Acetal Tube Fitting, Coupler, Shutoff, In-Line, 1/4" Flow Coupler x 1/4" Barb

PLCD17004 Coupler by Colder Products Company

1/4″ Flow Coupler x 1/4″ Barb.  Max Pressure 120 PSI.  Operating Temps -40 to 180 deg F.  NSF Rated.  Meets – FDA, USDA, NSF and ROHS specifications.

This has an integral inline shutoff valve.  That means when you disengage/de-couple this QD is stops the flow of gas.

I use similar QDs on the gas side of my system.  With those, I can swap out lines, remove lines from my kegerator and add on utility devices.  You could also use these to easy swap between ball and pin lock lines.

Colder PLCD17004 Acetal Tube Fitting, Coupler, Shutoff, In-Line, 1/4″ Flow Coupler x 1/4″ Barb

Colder PLCD22004 Acetal Tube Fitting, Insert, Shutoff, In-Line, 1/4″ Insert x 1/4″Barb

There are also straight through versions of this coupler.  Those do not have the inline check valve and will release pressure when you disengage.  See: PLC17004 and PLC22004.  The inline QDs are also cross compatible with shutoff versions.

Also: Tips & Gear for Your Kegerator

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Brand New 5 lb CO2 Tank from MoreBeer – $72.99 + Free Shipping, Limited Availability

CO2 Tank (Aluminum) - 5 lb. D1050

5 lb CO2 from MoreBeer

More Info

From the product description, check product page for current description, price and availability:

A new 5 lb CO2 tank is one of the required purchases when you’re changing over from bottling to kegging your beer.

This brand new 5 lb aluminum CO2 tank ships free in the 48 contigous states. Aluminum tanks will never rust, which is why we prefer them over steel tanks. The capacity refers to the amount of compressed (liquified) CO2 the tank can hold. 5 lbs of CO2 is enough to dispense 8 to 9 5-gallon kegs of homebrew.

All new CO2 tanks are shipped empty and will require either filling or exchanging for a full tank. Most local homebrew shops will stock gas to exchange, and many local welding supply companies can fill tanks on site.

CO2 tanks should always be stored in an upright position.

Dimensions: 14.33″ Tall x 5.25″ wide.

Limited Availability Deal of the Day: As of this posting, this on sale as as a MoreBeer Deal of the Day. Shipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

CO2 Tank (5 lb) D1050

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. prod:D1050

Dual Body, Two Pressure CO2 Regulator – $115.99

CO2 Regulator - Dual Body - Three Gauge

Triple Gauge, Dual Pressure Primary CO2 Regulator made by Taprite in the USA.  Features 5/16″ barbs that should work with both 5/16″ and 1/4″ ID Tubing.  High quality… Taprite is the leading regulator manufacturer in the US.

Benefits of a two pressure regulator… 1. Serve different beers at different pressures/carbonation levels, 2.  Serve and carbonate at different pressures (one “house” pressure, and another higher pressure for quickly carbonating) and 3.  Use one regulator for a house pressure and the second for utility functions such as purging kegs and carboys and transferring under pressure.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

CO2 Regulator – Dual Body – Three Gauge D1065 – $135.99 $115.99 + Free Shipping

Availability: This is a More Beer Deal of the Day. Quantities are limited. Check the Deal of the Day section – Here – to see if this is still available.

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft


pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Dual Body, Two Pressure CO2 Regulator – $105.99 Shipped (Save $30)

CO2 Regulator - Dual Body - Three Gauge

Triple Gauge, Dual Pressure Primary CO2 Regulator made by Taprite in the USA.  Features 5/16″ barbs that should work with both 5/16″ and 1/4″ ID Tubing.  High quality… Taprite is the leading regulator manufacturer in the US.

Benefits of a two pressure regulator… 1. Serve different beers at different pressures/carbonation levels, 2.  Serve and carbonate at different pressures (one “house” pressure, and another higher pressure for quickly carbonating) and 3.  Use one regulator for a house pressure and the second for utility functions such as purging kegs and carboys and transferring under pressure.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

CO2 Regulator – Dual Body – Three Gauge D1065 – $135.99 $105.99 + Free Shipping

Availability: This is a More Beer Deal of the Day. Quantities are limited. Check the Deal of the Day section – Here – to see if this is still available.

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft


pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

3 Way Expandable CO2 Manifold – $28.99, Limited Supply + Hands on Review

1057

3 Way Expandable CO2 Manifold.  Each connection has a check valve and a shut off valve.  For gas, I prefer barbs over flare connections.  This has 5/16″ barbs but you can also use 1/4″ ID tubing.  There aren’t a lot of things in homebrewing that grow with you.  For example, when you get ready to go from concentrated boils to full extract boils, you cannot buy an add on for your 4 gallon kettle . 🙂  This manifold is an exception, if the need arises, you can get an add-on and expand this manifold.  Check out my Hands on Review of this great system

Product Description – Here – Use coupon code BEERDEAL to get this discount.

Availability: This is a More Beer Deal of the Day. Quantities are limited. Check the Deal of the Day section – Here – to see if this is still available.

Gas Manifold – 3 Way D1805 – $38.99 $28.99 + Free Shipping with $59 Order

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Paintball CO2 Cylinder to Draft Regulator Adapter – Portable CO2 for Serving Draft Beer

the_adapter_co2_regulator_to_paintball_tank_adapter_close_up

That adapter allows you to connect a standard CO2 Regulator to a Paintball CO2 Tank.  That makes it a lot easier to serve your draft beer on the go.

About: Made of anodized Aluminum, this adapter allows you to attach a paintball CO2 tank to your existing keg system CO2 regulator. Why buy expensive secondary equipment that only has one purpose when you can make use of your existing equipment!

Makes portability of your homebrew a breeze! Perfect for camping, boating, picnics, parties, events or just sitting in your backyard! While we do not recommend this for carbonating (we just don’t like using all of our CO2 at once), this is perfect for dispensing.

Add on a regulator or paint ball CO2 tank to make your system portable now!  All CO2 tanks are shipped empty.

As of this posting, this is marked down to just $5.99.  Price, shipping and availability can change quickly.  Check the product page for up to the minute price and availability.

The Adapter CO2 regulator to Paintball Tank Adapter

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

aih

prod:aihpbadapter

Balancing Your Kegerator Draft System

I had the pleasure of attending the HomebrewCon held in Grand Rapids, Michigan several years ago.  If you didn’t have the chance to go, or even if you did, the AHA provides seminar recordings for that conference.  In fact they provide recordings going all the way back to 2012’s conference.  This is a member’s only benefit.  If you’re not a member of the AHA, I think you should consider joining.  Access to conference materials is only one of many benefits.  Join now – Looking for a deal?

Limited Time DEAL on Kegging Systems

  • Keg Connection is discounting their entire lineup of keg kit kegging systems by 15%.
  • There are multiple options to choose from. No coupon code is required.
  • HBF Readers Save More! HBF5OFF takes another 5% off.
  • Shipping is a flat fee no matter how much you order to addressed in the contiguous US.

Save on Keg Kits at Keg Connection!  – remember promo code HBF5OFF to get the extra 5% off

Continue reading →

Dual Gauge Fermentap CO2 Regulator – $39.99 + Tips and Gear for Your Kegerator

Dual Gauge CO2 Regulator - Fermentap

Fermentap CO2 regulator from MoreBeer.

More Info

From the product description, check product page for current description, price and availability:

“If you’re searching for an economical CO2 regulator that still offers reliable performance and great durability, this Fermentap Dual Gauge CO2 Regulator is just the thing.

This CO2 regulator regulator features hand-adjustable pressure that doesn’t require any tools, as well as a built-in tank gasket so that you won’t have to change the tank without one. The 30 PSI low pressure gauge offers a more precise range for dispensing beer at home when compared to the standard 60 PSI gauge, and the built-in pressure relief valve blows off at 40 PSI for added safety. With its chrome-plated brass construction, this Fermentap Dual Gauge CO2 Regulator will offer years of rust-free, reliable use.”  [full description]

 

Also: Tips & Gear for Your Kegerator

Product Description – Here – Use coupon code BEERDEAL to get this discount.

Availability: This is a More Beer Deal of the Day. Quantities are limited. Check the Deal of the Day section – Here – to see if this is still available.

Dual Gauge CO2 Regulator – Fermentap D1064 – $44.99 $39.99 + Free Shipping with a $59 order

This ships for free as part of MoreBeer’s Free Shipping Promo.  Grab your next recipe kit – See: BrewMaster Series – Brewing Pliny, some gear, something that’s on sale or clearance and put together a $59 order to get free shipping.

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

More Beer: Dual Body, Two Pressure CO2 Regulator – $105.99 + Free Shipping, Save $30

CO2 Regulator - Dual Body - Three Gauge

Triple Gauge, Dual Pressure Primary CO2 Regulator made by Taprite in the USA.  Features 5/16″ barbs that should work with both 5/16″ and 1/4″ ID Tubing.  High quality… Taprite is the leading regulator manufacturer in the US.

Benefits of a two pressure regulator… 1. Serve different beers at different pressures/carbonation levels, 2.  Serve and carbonate at different pressures (one “house” pressure, and another higher pressure for quickly carbonating) and 3.  Use one regulator for a house pressure and the second for utility functions such as purging kegs and carboys and transferring under pressure.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

CO2 Regulator – Dual Body – Three Gauge D1065 – $135.99 $105.99 + Free Shipping

Availability: This is a More Beer Deal of the Day. Quantities are limited. Check the Deal of the Day section – Here – to see if this is still available.

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft


pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Pair of Beer & Gas Tubing Quick Disconnects with Shutoff – $11.95, Limited Availability

Beer & Gas Quick Connect - In-Line Set (With Shut-Off) H550

Beer & Gas Quick Connect – In-Line Set (With Shut-Off) from MoreBeer

From the product description, check product page for current description, price and availability:

Use these high quality, food-grade quick-disconnects on your gas and beer tubing lines. Uses might include the following:

  • On a gas system to unhook your tank and regulator from your manifold so you take it with you.
  • On a beer line to easily switch between ball lock, pin-lock, or a commercial tap
  • On a counter-pressure bottle filler to be able to easily connect to your existing gas line.

This plastic quick disconnect set features 1/4″ barb which can be used with tubing ID 3/16″ through 5/16″. The quick disconnect functionality is activated by a shrouded thumb latch. The temperature range is -40F to 180F. They can handle a vacuum to 120 psi – so you need not worry about them leaking gas. The internal valve spring is 316 type stainless steel and the o-ring is food grade buna-n.

These quick disconnects have an integrated shut off valve.  When you disconnect them valves engage so beer or CO2 don’t continue to flow.  I use similar disconnects for the CO2 side of my kegerator.  They also work on the liquid side.  These are food grade.

Limited Availability Deal of the Day: As of this posting, this is marked down to $11.95 as a MoreBeer Deal of the Day. Shipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

Beer & Gas Quick Connect – In-Line Set (With Shut-Off) H550

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Taprite Two Pressure Regulator, Made in the USA [multiple carbonation levels and more]

taprite dual pressure regulator

Two Pressure Regulator by Taprite

More Info


Highlighted Features
  • AT PRESENT WE DO NOT SHIP TO CALIFORNIA
  • Tap two kegs at the same time and control the pressure to each
  • 0-60 gauges measure pressure to each keg
  • 0-3000 gauge measures CO2 in tank
  • Nonadjustable "shut down" blows off at 55-65 PSI
Learn More

 

A two pressure regulator gives you the ability to keep kegs at different pressures.  This is a requirement to maintain two distinct carbonation levels.  It’s also handy if you want to force carbonate a keg more quickly, at a higher pressure, while maintaining your standard serving pressure on a keg that’s already being served or if you want to have a utility line for purging kegs and such.

As of this posting, Taprite products are Made in the USA.  See: About on Taprite’s Website for current information regarding country of origin.  Print screen 8/8/17

TapRite Separate Pressure Adjusting 2 Product CO2 Regulator – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Compare – similar models, may not be identical

Continue reading →

Kegco KC LH-542 Draft Beer Regulator

Kegco KC LH-542 Draft Beer Regulator

More Info


Highlighted Features
  • Dual Gauge regulator shows you working pressure and tank pressure
  • Chrome plated brass body
  • Manual pressure release valve and pressure adjustment knob
  • Integral safety pressure relief valve releases at 45 psi
Learn More

 

Kegco KC LH-542 Draft Beer Regulator, Chrome – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

More Beer: Dual Body, Two Pressure CO2 Regulator – $110.95

CO2 Regulator - Dual Body - Three Gauge

Triple Gauge, Dual Pressure Primary CO2 Regulator made by Taprite in the USA.  Features 5/16″ barbs that should work with both 5/16″ and 1/4″ ID Tubing.  High quality… Taprite is the leading regulator manufacturer in the US.

Benefits of a two pressure regulator… 1. Serve different beers at different pressures/carbonation levels, 2.  Serve and carbonate at different pressures (one “house” pressure, and another higher pressure for quickly carbonating) and 3.  Use one regulator for a house pressure and the second for utility functions such as purging kegs and carboys and transferring under pressure.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

CO2 Regulator – Dual Body – Three Gauge D1065 – $135.99 $110.95 + Free Shipping

Availability: This is a More Beer Deal of the Day. Quantities are limited. Check the Deal of the Day section – Here – to see if this is still available.

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft


pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Brand New 5 lb CO2 Tank from MoreBeer – $72.99 + Free Shipping, Limited Availability

CO2 Tank (Aluminum) - 5 lb. D1050

5 lb CO2 from MoreBeer

More Info

From the product description, check product page for current description, price and availability:

A new 5 lb CO2 tank is one of the required purchases when you’re changing over from bottling to kegging your beer.

This brand new 5 lb aluminum CO2 tank ships free in the 48 contigous states. Aluminum tanks will never rust, which is why we prefer them over steel tanks. The capacity refers to the amount of compressed (liquified) CO2 the tank can hold. 5 lbs of CO2 is enough to dispense 8 to 9 5-gallon kegs of homebrew.

All new CO2 tanks are shipped empty and will require either filling or exchanging for a full tank. Most local homebrew shops will stock gas to exchange, and many local welding supply companies can fill tanks on site.

CO2 tanks should always be stored in an upright position.

Dimensions: 14.33″ Tall x 5.25″ wide.

Limited Availability Deal of the Day: As of this posting, this on sale as as a MoreBeer Deal of the Day. Shipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

CO2 Tank (5 lb) D1050

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. prod:D1050

Taprite T752HP Dual Pressure Kegerator CO2 Regulator [multiple carbonation levels and more]

Taprite T752HP Two Product Dual Pressure CO2 Regulator by Taprite

More Info

From the product description, check product page for current description, price and availability:

  • Large easy adjusting knob to increase or decrease delivery pressure
  • Each regulator has a sentry shut-down safety built into the body that instantly protects the dispensing system in the unlikely event of regulator failure
  • Outlet features shut-off with back flow check valve and 5/16″ I.D. hose barb nipple
  • Permanent quad-ring seal on inlet nipple helps eliminate leaks, no need to use a fiber washer each time tanks are changed
  • Blow-off is factory set at 55-65 psig

 

A two pressure regulator gives you the ability to keep kegs at different pressures.  This is a requirement to maintain two distinct carbonation levels.  It’s also handy if you want to force carbonate a keg more quickly, at a higher pressure, while maintaining your standard serving pressure on a keg that’s already being served or if you want to have a utility line for purging kegs and such.

As of this posting, Taprite products are Made in the USA.  See: About on Taprite’s Website for current information regarding country of origin.  Print screen 8/8/17

What are other people saying? Search this product’s Amazon reviews for “kegerator”

Taprite T752HP Two Product Dual Pressure Kegerator Co2 Regulator


Shop Around – Compare at MoreBeer – similar, but may not be identical

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

prod:B0060NOX40

Taprite Two Pressure Regulator, Made in the USA [multiple carbonation levels and more]

taprite dual pressure regulator

Two Pressure Regulator by Taprite

More Info


Highlighted Features
  • AT PRESENT WE DO NOT SHIP TO CALIFORNIA
  • Tap two kegs at the same time and control the pressure to each
  • 0-60 gauges measure pressure to each keg
  • 0-3000 gauge measures CO2 in tank
  • Nonadjustable "shut down" blows off at 55-65 PSI
Learn More

 

A two pressure regulator gives you the ability to keep kegs at different pressures.  This is a requirement to maintain two distinct carbonation levels.  It’s also handy if you want to force carbonate a keg more quickly, at a higher pressure, while maintaining your standard serving pressure on a keg that’s already being served or if you want to have a utility line for purging kegs and such.

As of this posting, Taprite products are Made in the USA.  See: About on Taprite’s Website for current information regarding country of origin.  Print screen 8/8/17

TapRite Separate Pressure Adjusting 2 Product CO2 Regulator – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Compare – similar models, may not be identical

Continue reading →

Brand New 5 lb CO2 Tank from MoreBeer – $72.99 + Free Shipping, Limited Availability

CO2 Tank (Aluminum) - 5 lb. D1050

5 lb CO2 from MoreBeer

More Info

From the product description, check product page for current description, price and availability:

A new 5 lb CO2 tank is one of the required purchases when you’re changing over from bottling to kegging your beer.

This brand new 5 lb aluminum CO2 tank ships free in the 48 contigous states. Aluminum tanks will never rust, which is why we prefer them over steel tanks. The capacity refers to the amount of compressed (liquified) CO2 the tank can hold. 5 lbs of CO2 is enough to dispense 8 to 9 5-gallon kegs of homebrew.

All new CO2 tanks are shipped empty and will require either filling or exchanging for a full tank. Most local homebrew shops will stock gas to exchange, and many local welding supply companies can fill tanks on site.

CO2 tanks should always be stored in an upright position.

Dimensions: 14.33″ Tall x 5.25″ wide.

Limited Availability Deal of the Day: As of this posting, this on sale as as a MoreBeer Deal of the Day. Shipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

CO2 Tank (5 lb) D1050

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. prod:D1050

More Beer: Dual Body, Two Pressure CO2 Regulator – $110.95

CO2 Regulator - Dual Body - Three Gauge

Triple Gauge, Dual Pressure Primary CO2 Regulator made by Taprite in the USA.  Features 5/16″ barbs that should work with both 5/16″ and 1/4″ ID Tubing.  High quality… Taprite is the leading regulator manufacturer in the US.

Benefits of a two pressure regulator… 1. Serve different beers at different pressures/carbonation levels, 2.  Serve and carbonate at different pressures (one “house” pressure, and another higher pressure for quickly carbonating) and 3.  Use one regulator for a house pressure and the second for utility functions such as purging kegs and carboys and transferring under pressure.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

CO2 Regulator – Dual Body – Three Gauge D1065 – $135.99 $110.95 + Free Shipping

Availability: This is a More Beer Deal of the Day. Quantities are limited. Check the Deal of the Day section – Here – to see if this is still available.

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft


pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Brand New 5 lb CO2 Tank from MoreBeer – $72.99 + Free Shipping, Limited Availability

CO2 Tank (Aluminum) - 5 lb. D1050

5 lb CO2 from MoreBeer

More Info

From the product description, check product page for current description, price and availability:

A new 5 lb CO2 tank is one of the required purchases when you’re changing over from bottling to kegging your beer.

This brand new 5 lb aluminum CO2 tank ships free in the 48 contigous states. Aluminum tanks will never rust, which is why we prefer them over steel tanks. The capacity refers to the amount of compressed (liquified) CO2 the tank can hold. 5 lbs of CO2 is enough to dispense 8 to 9 5-gallon kegs of homebrew.

All new CO2 tanks are shipped empty and will require either filling or exchanging for a full tank. Most local homebrew shops will stock gas to exchange, and many local welding supply companies can fill tanks on site.

CO2 tanks should always be stored in an upright position.

Dimensions: 14.33″ Tall x 5.25″ wide.

Limited Availability Deal of the Day: As of this posting, this on sale as as a MoreBeer Deal of the Day. Shipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

CO2 Tank (5 lb) D1050

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. prod:D1050