Category Archives: CO2 Hardware

Two Way Ball Lock Post Manifold

TSTabc 2 Way Gas Distribution Co2 Distributor Manifold With Ball Lock Disconnect post,co2 Splitter for Homebrew Beer Making Brewing Tool(2 way), Sliver

TSTabc 2 Way Gas Distribution Co2 Distributor Manifold With Ball Lock Disconnect post,co2 Splitter for Homebrew Beer Making Brewing Too

More Info

 

Also Consider: Stainless Steel Jumpers from Valuebrew those allow you to clean multiple ball lock keg lines at the same time.

TSTabc 2 Way Gas Distribution Co2 Distributor Manifold With Ball Lock Disconnect post,co2 Splitter for Homebrew Beer Making Brewing Tool(2 way), Sliver – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also Consider:

ball lock jumperStainless Steel Ball Lock Jumper with Food Grade Silicone O-Rings: Allows you to connect multiple ball lock runs to clean multiple lines and taps at the same time. Works with both liquid and gas QDs.  Stainless Steel Ball Lock Jumper – via Valuebrew – An easy add-on… food grade o-rings, featured in our Keg Rebuild Post

Continue reading →

Yaebrew FIVE Way CO2 Manifold w/Shutoffs & Check Valves

YaeBrew Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold 5/16" - 5 Way

5 way CO2 Manifold by YaeBrew

From the product description, check product page for current description, price and availability:

  • 5/16” barbed inlets and outlets
  • Shutoffs with built-in check valves
  • YaeBrew Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold 5/16″ – 5 Way

Use to pressurize multiple kegs off one co2 regulator.

YaeBrew Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold 5/16″ – 5 Way – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Yaebrew 4 Way CO2 Manifold w/Shutoffs & Check Valves

YaeBrew Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold – Splitter 1/4″ Barb Fittings (4 Way)

More Info



 

Use to pressurize multiple kegs off one co2 regulator.

YaeBrew Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold – Splitter 1/4″ Barb Fittings (4 Way) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Pair 1/4″ Quick Disconnects w/Shut-Off (gas & liquid)

LucaSng Plastic Hose Quick Connector with Shut-Off,Gas and Liquid Quick Connector Check Valve Beer Line Tubing Quick Disconnect (1/4” Barb)LucaSng Plastic Hose Quick Connector with Shut-Off,Gas and Liquid Quick Connector Check Valve Beer Line Tubing Quick Disconnect (1/4” Barb)

More Info

From the product description, check product page for current description, price and availability:

  • This plastic quick disconnect set features 1/4″ barb.
  • Shutoffs(check valve) prevent leakage when disconnected.Use these high quality, food-grade quick-disconnects on your gas and beer tubing lines.
  • These couplings make it very easy to swap out couplers and other beer and air side accessories.
  • Made of Food-grade plastic with stainless steel springs and NSF approved.
  • The temperature range is -40F to 180F.They can handle a vacuum to 80 psi – so you need not worry about them leaking gas.

 

These are valved disconnects. When they are disengaged a shut off mechanism stops the flow of gas or liquid.

LucaSng Plastic Hose Quick Connector with Shut-Off,Gas and Liquid Quick Connector Check Valve Beer Line Tubing Quick Disconnect (1/4” Barb) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Compare: Beer & Gas Quick Connect – In-Line Set (With Shut-Off) H550 – similar concept, but not identical

duotightreview

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

2 Way CO2 Manifold – Serve Multiple Kegs

Homebrewers Outpost - D1802 Gas Manifold - 2 Way Aluminum (Keg King) 1/4" Barb

2 Way CO2 Manifold

More Info


Highlighted Features
  • Split your gas line to serve multiple kegs with this manifold
  • Splits one gas feed to two, each with their own shutoff/check valve
  • Aluminum body construction, with brass barbs & stainless shutoffs
  • Screw holes for easy mounting
  • 1/4 inch
Learn More

 

Use to pressurize multiple kegs off one co2 regulator.  Check valves stop beer or other liquids from back feeding into other lines or your regulator.

Homebrewers Outpost – D1802 Gas Manifold – 2 Way Aluminum (Keg King) 1/4″ Barb – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Mounting Board for DuoTight Inline Regulators – on sale from… $10.50 via William’s Brewing Spring Sale

Mounting Boards at William’s Brewing. Thank you to /u/skaht on reddit for this photo

Gas Board for Duotight In-Line Regulators via William’s Brewing

More Info

From the product description, check product page for current description, price and availability:

This sturdy food grade polypropylene board features drilled holes for up to 4 Duotight Regulators (item C11). Drilled mounting holes are also included so that once you mount the regulators and DuoTight fittings/tubing to the board, you can also install the board in a convenient location. Also included are cutout boxes so you can line up 4 labels above the regulators.

Note that pictured regulators, screws, Duotight fittings, labels, and EvaBarrier tubing are not included. This is just a base board. 12″ wide, 10.25″ tall, and 3/8″ thick.

 

This allows you to easily mount multiple Duotight In-Line Regulators.  Those regulators allow you to easily (and cheaply) set individual pressures and carbonation levels.

The DuoTight lineup is awesome… Hands on Review: DuoTight Fittings & EVABarrier Tubing!

Polypropylene Gas Board for 4 Inline Regulators

Polypropylene Gas Board for 6 Inline Regulators

Clearance Sale at William’s Brewing!

More DuoTight!

duotightreview

Continue reading →

Dual Body, Two Pressure CO2 Regulator – $115.99 + Free Shipping, Limited Time Deal of the Day

CO2 Regulator - Dual Body - Three Gauge

Triple Gauge, Dual Pressure Primary CO2 Regulator made by Taprite in the USA.  Features 5/16″ barbs that should work with both 5/16″ and 1/4″ ID Tubing.  High quality… Taprite is the leading regulator manufacturer in the US.

Benefits of a two pressure regulator… 1. Serve different beers at different pressures/carbonation levels, 2.  Serve and carbonate at different pressures (one “house” pressure, and another higher pressure for quickly carbonating) and 3.  Use one regulator for a house pressure and the second for utility functions such as purging kegs and carboys and transferring under pressure.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

CO2 Regulator – Dual Body – Three Gauge D1065 – $135.99 $115.99 + Free Shipping

Availability: This is a More Beer Deal of the Day. Quantities are limited. Check the Deal of the Day section – Here – to see if this is still available.

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Two Way Gas Manifolds with MFL – $21.99 at MoreBeer + Easy Conversion to DuoTight

Aluminum Gas Mainfold - 2 Way - 1/4 in. Flare D1857

Aluminum Gas Mainfold – 2 Way – 1/4 in. Flare D1857

Convert to DuoTight!

Build a DuoTight CO2 Gas Manifold! – for Kegland EVABarrier Tubing

Want to Learn More about DuoTights and EVABarrier Tubing?  

duotightreview

Continue reading →

Yaebrew 4 Way CO2 Manifold w/Shutoffs & Check Valves

YaeBrew Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold – Splitter 1/4″ Barb Fittings (4 Way)

More Info

 

Use to pressurize multiple kegs off one co2 regulator.

YaeBrew Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold – Splitter 1/4″ Barb Fittings (4 Way) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Two Way Ball Lock Post Manifold

TSTabc 2 Way Gas Distribution Co2 Distributor Manifold With Ball Lock Disconnect post,co2 Splitter for Homebrew Beer Making Brewing Tool(2 way), Sliver

TSTabc 2 Way Gas Distribution Co2 Distributor Manifold With Ball Lock Disconnect post,co2 Splitter for Homebrew Beer Making Brewing Too

More Info



 

Also Consider: Stainless Steel Jumpers from Valuebrew those allow you to clean multiple ball lock keg lines at the same time.

TSTabc 2 Way Gas Distribution Co2 Distributor Manifold With Ball Lock Disconnect post,co2 Splitter for Homebrew Beer Making Brewing Tool(2 way), Sliver – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also Consider:

ball lock jumperStainless Steel Ball Lock Jumper with Food Grade Silicone O-Rings: Allows you to connect multiple ball lock runs to clean multiple lines and taps at the same time. Works with both liquid and gas QDs.  Stainless Steel Ball Lock Jumper – via Valuebrew – An easy add-on… food grade o-rings, featured in our Keg Rebuild Post

Continue reading →

Two Pressure CO2 Regulator [multiple carbonation levels and more]

MOD Complete MDC99007 CO2 Beer Regulator Dual Pressure

More Info



 

Why a two pressure regulator?  A two pressure regulator gives you the ability to keep kegs at different pressures.  This is a requirement to maintain two distinct carbonation levels.  It’s also handy if you want to force carbonate a keg more quickly, at a higher pressure, while maintaining your standard serving pressure on a keg that’s already being served or if you want to have a utility line for purging kegs and such.

MOD Complete MDC99007 CO2 Beer Regulator Dual Pressure Kegerator Heavy Duty Features T-Style Adjusting Handle – 0 to 60 PSI-0-3000 Tank Pressure CGA-320 Inlet w/ 3/8″ O.D. Safety Discharge 50-55 PSI – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Pair 1/4″ Quick Disconnects w/Shut-Off (gas & liquid)

LucaSng Plastic Hose Quick Connector with Shut-Off,Gas and Liquid Quick Connector Check Valve Beer Line Tubing Quick Disconnect (1/4” Barb)LucaSng Plastic Hose Quick Connector with Shut-Off,Gas and Liquid Quick Connector Check Valve Beer Line Tubing Quick Disconnect (1/4” Barb)

More Info

From the product description, check product page for current description, price and availability:

  • This plastic quick disconnect set features 1/4″ barb.
  • Shutoffs(check valve) prevent leakage when disconnected.Use these high quality, food-grade quick-disconnects on your gas and beer tubing lines.
  • These couplings make it very easy to swap out couplers and other beer and air side accessories.
  • Made of Food-grade plastic with stainless steel springs and NSF approved.
  • The temperature range is -40F to 180F.They can handle a vacuum to 80 psi – so you need not worry about them leaking gas.

 

These are valved disconnects. When they are disengaged a shut off mechanism stops the flow of gas or liquid.

LucaSng Plastic Hose Quick Connector with Shut-Off,Gas and Liquid Quick Connector Check Valve Beer Line Tubing Quick Disconnect (1/4” Barb) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Compare: Beer & Gas Quick Connect – In-Line Set (With Shut-Off) H550 – similar concept, but not identical

duotightreview

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Ball Lock Post Manifold!

TSTabc 2 Way Gas Distribution Co2 Distributor Manifold With Ball Lock Disconnect post,co2 Splitter for Homebrew Beer Making Brewing Tool(2 way), Sliver

TSTabc 2 Way Gas Distribution Co2 Distributor Manifold With Ball Lock Disconnect post,co2 Splitter for Homebrew Beer Making Brewing Too

More Info



 

Also Consider: Stainless Steel Jumpers from Valuebrew those allow you to clean multiple ball lock keg lines at the same time.

TSTabc 2 Way Gas Distribution Co2 Distributor Manifold With Ball Lock Disconnect post,co2 Splitter for Homebrew Beer Making Brewing Tool(2 way), Sliver – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also Consider:

ball lock jumperStainless Steel Ball Lock Jumper with Food Grade Silicone O-Rings: Allows you to connect multiple ball lock runs to clean multiple lines and taps at the same time. Works with both liquid and gas QDs.  Stainless Steel Ball Lock Jumper – via Valuebrew – An easy add-on… food grade o-rings, featured in our Keg Rebuild Post

Continue reading →

DuoTight Inline CO2 Regulator [control each keg separately] + Hands on Review

DuoTight Inline Secondary with Gauge

Highlighted Features
  • Package contains:
  • | Featues:-Suits pressures 0-150psiSuitable for mains water pressureSuitable for liquid or gasMade from Acetal/POM, EPDM o-rings and stainless teethSuits 8mm (5/16) OD Tubing such as our Evabarrier TubingIncludes integrated 0-60psi Pressure Gauge
  • Duotight Inline In-Line Regulator - With Integrated Gauge For Water Or Gas
  • ADVERT FOR: ONLY
Learn More

This is an inline secondary regulator.  You still need a primary regulator attached to your CO2 tank.  The idea is, you set the primary to the highest pressure you will use (without exceeding specifications of any component of your system) and then use these regulators inline (one per line) to fine tune pressure and carbonation.  As an example, you could set your primary to 25 PSI for faster force carbonation and set each line to a different pressure based on desired carbonation level.

Check out my Hands on Review of this great tool

Duotight Inline In-Line Regulator – With Integrated Gauge For Water Or Gas – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Hands on Review!

Compatible Mounting Boards

More DuoTight!

duotightclips

duotightreview

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

2 Way CO2 Manifold w/Shutoffs & Check Valves

Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold - Splitter 5/16" Barb Fittings (2 way 5/16" Barb)

Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold – Splitter 5/16″ Barb Fittings (2 way 5/16″ Barb)

More Info

From the product description, check product page for current description, price and availability:

  • The gas manifold body is made of high quality aluminum. The inlet barb & hexagon nut is made of brass. The switch valve is made of copper plated zinc.So our gas manifold is lighter & durable than steel
  • 2 way gas manifold allow you to supply CO2 for your several beer kegs. The gas manifold also provide the extra gas inlet for beer keg
  • 【No Leaks & Independent Shunt】: The integrated check valves can prevent backflow of gas or liquid and protect your splitter. Every switch valve has their handles to control the gas flow,so each gas line will not affect the airflow of other kegs
  • 【Easy To Use】: The gas manifold come with 5/16″ barb OD outlets & inlets. Inlet barb can connect with CO2 tank by hose. And the barb of shutoff valve can connect with your keg by hose to achieve carbonating beer
  • 【Faster To Install】:Just need two screws or nails,you can easily secure this gas manifold on walls or kegerators. A gas manifold can split the delivery of CO2 into several parts to serve the draft beer system

 

Use to pressurize multiple kegs off one co2 regulator.

Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold – Splitter 5/16″ Barb Fittings (2 way 5/16″ Barb) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Troubleshooting DuoTight Fitting and EVABarrier Tubing Leaks

Leaks? Troubleshooting EVABarrier/DuoTight Leaks

I’ve done several pressure tests with DuoTight Fittings and EVABarrier Tubing. Each test has proven the tested components were leak free. Having said that, it’s entirely possible that you’ll have a leak. This happens with any tubing system, that’s why we… check for leaks. Some tips…

  • Check for leaks as you would if you were using standard tubing. DuoTights and EVABarrier are amazing… but not magic. They need to be installed correctly and securely throughout your system. Liquid liquids are easy to spot. Gas leaks are a little more difficult.
  • I highly suggest picking up a DuoTight Pressure Gauge. You can easily add this to your setup and use this technique for checking for gas leaks.
  • If you have a section of EVABarrier tubing that’s marred or damaged, cut off a couple inches to get a fresh end.
  • Make sure you’re pushing the EVABarrier Tubing completely in to your DuoTight Fitting.
  • Make sure you’re pulling your EVABarrier Tubing out firmly to engage the sealing mechanism.
  • DuoTight Compatible Locking Clips – I recommend using these on all DuoTight connections. They snap into place pushing the collar out, securely engaging the fitting. They also help prevent bumps and moves from disengaging the connection.
  • If you have a particular fitting that won’t seal… contact the seller or manufacturer to get a replacement. A leaking DuoTight fitting is not normal and I’m guessing your retailer will take care of you. Out of the dozens of fittings I have I’ve had 1 that was non-functional on receipt.

DuoTight Compatible Locking Clips

DuoTight Compatible Locking Clips

Valuebrew’s DuoTight Compatible Locking Clips are a great addition to any DuoTight setup.  These snap into the collar of DuoTight Fittings and lock connections in place. This makes the connection more secure and reduces the chances of leakage.

These are available in both 8mm and 9.5mm sizes

DuoTight Compatible Locking Clips

Sanitizing DuoTight Fittings – Star San & DuoTights?

I’ve gotten some feedback when it comes to DuoTights and Star San.  The materials used in DuoTight fittings – Acetal, EPDM, Stainless – are generally compatible with Star San. However that doesn’t mean that you can soak DuoTights in Star San endlessly.

Star Stan could eventually damage DuoTights (and lots of other things) given excessive exposure. Damaged fittings = potential leaks. Contact time for Star San is five minutes. That’s about how long you should leave a part sitting in Star San.

Related: Star San Tips & Tricks

Our Step by Step on Finding and Fixing Kegerator CO2 Leaks

fix keg co2 leaks Continue reading →

Kegland DuoTight Inline Secondary with Gauge! control each keg separately & more + Hands on Review

Duotight Regulator with Gauge

Duotight Regulator with Gauge via William’s Brewing

More Info

From the product description, check product page for current description, price and availability:

This 8mm Duotight compatible regulator with 0-60 PSI gauge fits 8mm outer diameter EvaBarrier tubing. Suitable for gas, all components are food grade. The included gauge is accurate to plus or minus 6 PSI.

Note: This unit comes with a 0-60 PSI gauge that is only ¾” in diameter. If you intend to use this regulator in the 10 to 30 PSI range, you will need to order optional gauge C93, which reads 0-30 PSI. Below 10 psi, this regulator is not very accurate. You will also need EvaBarrier tubing to connect this regulator, either our item number Z91 or Z92.

This is perfect for reducing the pressure of one gas line in a draft system – for example, with a single regulator and C02 bottle, you can set the pressure at the C02 bottle with the larger regulator (not included) and then put this regulator inline to reduce the pressure. Handy for when you want to carbonate one keg at 25 PSI and dispense another at 10 PSI.

 

 

Duotight Regulator with Gauge

Upgrade to Digital:

Kegland has released a digital regulator option that works with their great inline regulator and gauge-equipped BlowTie Spunding Valves.

Hands on Review: Kegland Digital Gauges!

Continue reading →

Mounting Board for DuoTight Inline Regulators – on sale from… $10.50 via William’s Brewing

Mounting Boards at William’s Brewing. Thank you to /u/skaht on reddit for this photo

Gas Board for Duotight In-Line Regulators via William’s Brewing

More Info

From the product description, check product page for current description, price and availability:

This sturdy food grade polypropylene board features drilled holes for up to 4 Duotight Regulators (item C11). Drilled mounting holes are also included so that once you mount the regulators and DuoTight fittings/tubing to the board, you can also install the board in a convenient location. Also included are cutout boxes so you can line up 4 labels above the regulators.

Note that pictured regulators, screws, Duotight fittings, labels, and EvaBarrier tubing are not included. This is just a base board. 12″ wide, 10.25″ tall, and 3/8″ thick.

 

This allows you to easily mount multiple Duotight In-Line Regulators.  Those regulators allow you to easily (and cheaply) set individual pressures and carbonation levels.

The DuoTight lineup is awesome… Hands on Review: DuoTight Fittings & EVABarrier Tubing!

Polypropylene Gas Board for 4 Inline Regulators

Polypropylene Gas Board for 6 Inline Regulators

Clearance Sale at William’s Brewing!

Check sale or product page for current availability & pricing

More DuoTight!

duotightreview

Continue reading →

FERRODAY Dual Gauge CO2 Draft Beer Regulator

FERRODAY Dual Gauge CO2 Draft Beer Regulator Dual Stage Pressure Regulator CGA-320 CO2 Tank Beer Kegerator Regulator with Relief Valve Beer Keg Pressure Regulator for Homebrew 0-60 PSI 0-3000PSI

FERRODAY Dual Gauge CO2 Draft Beer Regulator Dual Stage Pressure Regulator CGA-320 CO2 Tank Beer Kegerator Regulator with Relief Valve Beer Keg Pressure Regulator for Homebrew 0-60 PSI 0-3000PSI

More Info

Highlighted Features
  • Safety & No Leaks: FERRODAY CO2 keg pressure regulator features a heavy-duty forged brass body, well made connections, and exquisitely crafted pressure release valve to prevent any kind of gas leakage
  • Easy to Adjust by Hand: CO2 regulator has 2 control knobs, big adjustment knob enables more precise control even small adjustments, small shut-off knob allows instantly shut off without liquid backing up the gas line, easy to turn
  • Lock Ring to Hold PSI & Big Gauge Clear View: A lock ring under the big knob, so the knob can be firmly locked to hold your pressure setting. Two Big gauges always accurately show you the CO2 volume in the cylinder and the output pressure to keg. FERRODAY keg regulator has a clear view of pressure for a better homebrew experience
  • Pressure Release Valve & Filter: Safety first! A customized pressure release valve automatically releases pressures at about 50 psi for safety concerns. Also can be manually pulled out for pressure adjustment. A sintered metal filter in the stem keeps dirt out of the regulator
  • After-Sales Service: We are committed to offering you high-quality products as well as superior service! Please feel free to tell if any problem, we would try our best to satisfy you. Provide technical support
Learn More

 

FERRODAY Dual Gauge CO2 Regulator Beer Kegerator CO2 Regulator Beer Keg Dual-stage Kegerator Regulator CGA-320 Beer Regulator Co2 Kegerator Part Beer Keg Regulator Co2 Beer Gas Regulator Beer Tap Tool – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Pair 1/4″ Quick Disconnects w/Shut-Off (gas & liquid)

LucaSng Plastic Hose Quick Connector with Shut-Off,Gas and Liquid Quick Connector Check Valve Beer Line Tubing Quick Disconnect (1/4” Barb)LucaSng Plastic Hose Quick Connector with Shut-Off,Gas and Liquid Quick Connector Check Valve Beer Line Tubing Quick Disconnect (1/4” Barb)

More Info

From the product description, check product page for current description, price and availability:

  • This plastic quick disconnect set features 1/4″ barb.
  • Shutoffs(check valve) prevent leakage when disconnected.Use these high quality, food-grade quick-disconnects on your gas and beer tubing lines.
  • These couplings make it very easy to swap out couplers and other beer and air side accessories.
  • Made of Food-grade plastic with stainless steel springs and NSF approved.
  • The temperature range is -40F to 180F.They can handle a vacuum to 80 psi – so you need not worry about them leaking gas.

 

These are valved disconnects. When they are disengaged a shut off mechanism stops the flow of gas or liquid.

LucaSng Plastic Hose Quick Connector with Shut-Off,Gas and Liquid Quick Connector Check Valve Beer Line Tubing Quick Disconnect (1/4” Barb) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Compare: Beer & Gas Quick Connect – In-Line Set (With Shut-Off) H550 – similar concept, but not identical

duotightreview

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon