Category Archives: Keg Lids

New Replacement Corny Keg Lid with Stainless Steel PRV

Gekufa Cornelius Keg Lid, Corny Keg Lid Replacement with 304 Stainless Steel Pressure Relief Valve & O-ring for Homebrew Beer Kegging, Soda Keg Lid

Gekufa Cornelius Keg Lid, Corny Keg Lid Replacement with 304 Stainless Steel Pressure Relief Valve & O-ring for Homebrew Beer Kegging, Soda Keg Lid

More Info
Highlighted Features
  • Good Sealing:With New O-ring & 304 SS Pressure Relief Valve, can hold pressure without leaks.
  • Easy to Install: Large handle makes installation easier; labor-saving design of safety relief valve, no need to keep lifting when deflated, just lift once and rotate 90° to continuously deflate.
  • More Sturdy: Made of 304 stainless steel
Learn More

 

Note from HBF: One difference between Pin Lock and Ball Lock kegs is the type of lids that come with each.  Ball Locks, generally, have a manual PRV valve, while Pin Locks do not.  Ball Lock style lids are, in my opinion, superior because the manual PRV allows you to easily vent your keg as needed.  The good news is that, for standard kegs, the lids are the same size and can be interchanged.  That means you can use a Ball Lock style lid in a Pin Lock Keg.

Gekufa Cornelius Keg Lid, Corny Keg Lid Replacement with 304 Stainless Steel Pressure Relief Valve & O-ring for Homebrew Beer Kegging, Soda Keg Lid – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources
standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Ball Lock Keg Carbonation Lid

Ball Lock Keg Carbonation Lid

More Info


Highlighted Features
  • Our keg lid is set up to accept a standard ball lock disconnect.
  • To carbonate, apply CO2 through the lid as shipped at 45 PSI for about 24 hours.
  • Or to fast carbonate in less than an hour, add a piece of clear tubing long enough to place an aeration stone at the bottom of your keg.
  • The metal parts of our keg lids are 100% 304 Stainless Steel and the gasket seal is food safe neoprene.
  • Widely used to carbonate beer, soda, juice, water and even sparkling water. Fits to all ball lock and pin lock homebrew corny kegs that use a standard oval lid and can also be used as a regular lid when not fast carbonating.
  • Does not include tubing or air stone.
Learn More

Use to assist in force carbonating your homebrew.

Use to help speed up carbonation, as a spare keg lid, for testing, dialing in inline regulators and more. Photo of a similar lid being used with my Spunding Valve.

Stainless Steel 304 Forced Carbonation Oval Cornelius Keg Lid for Soda or Homebrew Beer– affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Compare: at MoreBeer – similar function but not identical

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Replacement Keg Corny Keg Lid – works with Ball Lock & Pin Lock

Replacement Corny Keg Lid

More Info


Highlighted Features
  • Sealed Perfect: With New O-ring & 304 SS Pressure Relief Valve, can hold pressure without leaks.
  • Easy to Install & Use: Large handle makes installation easier; labor-saving design of safety relief valve, no need to keep lifting when deflated, just lift once and rotate 90° to continuously deflate.
  • Quality Guarantee: All keg lids are tested before delivery to ensure performance and reliability.
  • After-sales Satisfaction: one-year warranty, lifetime maintenance (not including O-rings)
  • More Sturdy: Made of 304 stainless steel
Learn More

 

One difference between Pin Lock and Ball Lock kegs is the type of lids that come with each.  Ball Locks, generally, have a manual PRV valve, while Pin Locks do not.  Ball Lock style lids are, in my opinion, superior because the manual PRV allows you to easily vent your keg as needed.  The good news is that, for standard kegs, the lids are the same size and can be interchanged.  That means you can use a Ball Lock style lid in a Pin Lock Keg.  See: What’s the Difference Between Ball Lock Kegs and Pin Lock Kegs?

304 stainless steel Cornelius Keg Lid New Replacement Corny Keg (Soda Keg) Lid with New O-ring for Cornelius or Firestone Kegs for homebrew beer – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

bulk keg orings

 


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Ball Lock Keg Carbonation Lid and Stone

Home Brew Cornelius Style Keg Carbonation Lid Kit with 0.5 Micron Diffusion Stone Seal for Cornelius Corny Beer

Use to assist in force carbonating your homebrew.

More Info


Highlighted Features
  • Material and Application : This keg carbonation lid is made of high quality stainless steel materials, which is sturdy, and non-, ensures long term durability and reliability. It fits great for all standard oval lid kegs, such as fire stone keg, cornelius keg, lock keg and other normal corny kegs.
  • Built-in Carbonation Stone : This home brew cornelius keg lid comes with built-in carbonation stone and stainless lock post, silicon keg lid seal, which provides the easiest way to carbonate kegs. Shake no more with this convenient kit that makes force carbonating your corny keg a breeze.
  • in Use : This stainless steel pressure relief valve lasts a longthan the plastic one, you don’t need to change the valve frequently. It also can replace your old bent, dented, or leaking lids.
  • How to Sanitize and : You can take the keg lid into acid to sanitize before and after each use, and boiled the 0.5diffusion stone in water to sanitize.
  • How to Use : Install the kit into the opening of a keg and simply attach gas disconnect to the plug on the lid. Set the regulator to the desired CO2 setting and wait until desired carbonation level is achieved in the beverage.
Learn More

 

Use to help speed up carbonation, as a spare keg lid, for testing, dialing in inline regulators and more. Photo of a similar lid being used with my Spunding Valve.

Home Brew Cornelius Style Keg Carbonation Lid Kit with 0.5Diffusion Stone Seal for Cornelius Corny Beer – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Compare: at MoreBeer – similar function but not identical

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Replacement Keg Corny Keg Lid – works with Ball Lock & Pin Lock

Replacement Corny Keg Lid

More Info


Highlighted Features
  • Sealed Perfect: With New O-ring & 304 SS Pressure Relief Valve, can hold pressure without leaks.
  • Easy to Install & Use: Large handle makes installation easier; labor-saving design of safety relief valve, no need to keep lifting when deflated, just lift once and rotate 90° to continuously deflate.
  • Quality Guarantee: All keg lids are tested before delivery to ensure performance and reliability.
  • After-sales Satisfaction: one-year warranty, lifetime maintenance (not including O-rings)
  • More Sturdy: Made of 304 stainless steel
Learn More

 

One difference between Pin Lock and Ball Lock kegs is the type of lids that come with each.  Ball Locks, generally, have a manual PRV valve, while Pin Locks do not.  Ball Lock style lids are, in my opinion, superior because the manual PRV allows you to easily vent your keg as needed.  The good news is that, for standard kegs, the lids are the same size and can be interchanged.  That means you can use a Ball Lock style lid in a Pin Lock Keg.  See: What’s the Difference Between Ball Lock Kegs and Pin Lock Kegs?

304 stainless steel Cornelius Keg Lid New Replacement Corny Keg (Soda Keg) Lid with New O-ring for Cornelius or Firestone Kegs for homebrew beer – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

bulk keg orings

 


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Ferroday Carbonation Keg Lid + Diffusion Air Stone & Tubing + my explanation of how these work

FERRODAY Carbonation Keg Lid Cornelius Keg Lid Soda Beer Forced Carbonation Homebrew Carbonator Stainless Steel 304 Carbonation Keg Lid with Diffusion Stone 20" Tube - Oval Keg Lid

Ferroday Ball Lock Carbonation Lid with Diffusion Stone

More Info

From the product description, check product page for current description, price and availability:

  • 【Includes All You Need】Keg lid + Air stone + 20 inch tubing; All the metal parts are made of SS304, the head of the pressure release valve is made of solid ABS, food safe tubing, gaskets, all sturdy and wear-resistant.
  • 【Widely Used for Home Brew】 Widely used to carbonate beer, soda, juice, water and even sparkling water. Fits to all the homebrew kegs that require a standard oval lid, normally called: corny keg/cornelius keg/ ball lock keg…This is a perfect choice for keg lid replacement!
  • 【Best Carbonation & No More Shaking】Forced Beer Carbonation: the diffusion stone will send a tremendous number of gas bubbles out through the beer and the miniscule bubbles will create a huge amount of surface area to help absorb CO2 rapidly into the beer! No need to shake the keg during carbonation anymore!
  • 【Safe Pressure Release & Cleaning Tips】 1. For safety concerns, the valve will automatically open up when pressure in the keg reaches 70 psi; 2. Please release the pressure in keg before open the keg. 3. Please clean the kit before and after each use, and please note the diffusion stone needs to be boiled in water to unclog pores.

 

This has a ball lock post on it that has in inlet on the inside of the keg. That inlet connects to tubing which in turn connections to a carbonation stone. This should work on standard ball lock and pin lock kegs, although you’ll need a ball lock QD to connect to it.

How do these work?  My theory… CO2 is dispersed through the stone into solution. This causes a small amount of movement in the liquid, this movement helps to the solution to come to equilibrium more quickly than simple head space pressure. I’m not saying this is a steady flow of bubbles, my guess is a slow, periodic occurrence, enough to speed up the process.

FERRODAY Carbonation Keg Lid Cornelius Keg Lid Soda Beer Forced Carbonation Homebrew Carbonator Stainless Steel 304 Carbonation Keg Lid with Diffusion Stone 20″ Tube – Oval Keg Lid – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Brand New ITALIAN MADE Keg Lids… $13.53 with stacking deals + flat rate eligible

replacement corny keg lids

New Italian Lid for Cornelius or Firestone Kegs via Keg Connection

More Info

From the product description, check product page for current description, price and availability:

Cornelius Style Lid manufactured in Italy by AEB

This is the highest quality lid on the market. It features a metal pressure relief valve and is constructed of Stainless Steel. Most lids are now made in China, but this one is made in Italy! This lid will fit all standard Ball Lock and Pin Lock kegs (except “Racetrack Style Kegs which have straight sides vs oval holes for the lids)

 

In most cases, Pin lock and ball lock cornelius style keg lids are interchangeable from a size perspective.  That means you can, generally speaking, put a pepsi/ball lock style (manual prv) lid on a coke/pin lock style (no manual prv) keg.  In my book, that’s a solid upgrade.  See: What’s the Difference Between Ball Lock Kegs and Pin Lock Kegs?

  • 16% Off Everything at Keg Connection: Keg Connection is discount nearly everything site wide by 16%. This is a rare sitewide/percent off deal. No coupon code is required, discounts reflected on each product page.
  • That sale brings these down to just $14.24.
  • HBF Readers Save More!  Coupon code HBF5OFF saves you 5% off EVERYTHING site wide.  Stacks with all non-coupon sales
  • This stacks making these just $13.53.
  • These also fall under Keg Connection’s Flat Rate Shipping Promotion.  Your entire order ships for one flat rate, no matter how much you order, to addresses in the contiguous US.

New Italian Lid for Cornelius or Firestone Kegs

Related:

Some everyday great deals and unique items at Keg Connection…

Parts and Diagrams:

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. rp:kcitlids

Ferroday Carbonation Keg Lid + Diffusion Air Stone & Tubing

FERRODAY Carbonation Keg Lid Cornelius Keg Lid Soda Beer Forced Carbonation Homebrew Carbonator Stainless Steel 304 Carbonation Keg Lid with Diffusion Stone 20" Tube - Oval Keg Lid

Ferroday Ball Lock Carbonation Lid with Diffusion Stone

More Info

From the product description, check product page for current description, price and availability:

  • 【Includes All You Need】Keg lid + Air stone + 20 inch tubing; All the metal parts are made of SS304, the head of the pressure release valve is made of solid ABS, food safe tubing, gaskets, all sturdy and wear-resistant.
  • 【Widely Used for Home Brew】 Widely used to carbonate beer, soda, juice, water and even sparkling water. Fits to all the homebrew kegs that require a standard oval lid, normally called: corny keg/cornelius keg/ ball lock keg…This is a perfect choice for keg lid replacement!
  • 【Best Carbonation & No More Shaking】Forced Beer Carbonation: the diffusion stone will send a tremendous number of gas bubbles out through the beer and the miniscule bubbles will create a huge amount of surface area to help absorb CO2 rapidly into the beer! No need to shake the keg during carbonation anymore!
  • 【Safe Pressure Release & Cleaning Tips】 1. For safety concerns, the valve will automatically open up when pressure in the keg reaches 70 psi; 2. Please release the pressure in keg before open the keg. 3. Please clean the kit before and after each use, and please note the diffusion stone needs to be boiled in water to unclog pores.

 

This has a ball lock post on it that has in inlet on the inside of the keg. That inlet connects to tubing which in turn connections to a carbonation stone. This should work on standard ball lock and pin lock kegs, although you’ll need a ball lock QD to connect to it.

How do these work?  My theory… CO2 is dispersed through the stone into solution. This causes a small amount of movement in the liquid, this movement helps to the solution to come to equilibrium more quickly than simple head space pressure. I’m not saying this is a steady flow of bubbles, my guess is a slow, periodic occurrence, enough to speed up the process. This is a theory.

FERRODAY Carbonation Keg Lid Cornelius Keg Lid Soda Beer Forced Carbonation Homebrew Carbonator Stainless Steel 304 Carbonation Keg Lid with Diffusion Stone 20″ Tube – Oval Keg Lid – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Brand New Universal Replacement Keg Lid by Beverage Factory [Ball Lock & Pin Lock]

Beverage Factory BLL-N-AUS Replacement Lid for Home brew Keg

Beverage Factory BLL-N-AUS Replacement Lid for Home brew Keg

From the product description, check product page for current description, price and availability:

This is a universal replacement lid for home brew/soda kegs. BRAND new lid comes with closure O-Ring pressure release Valve with sturdy 1 inch metal ring to relieve pressure out of your keg.

One difference between Pin Lock and Ball Lock kegs is the type of lids that come with each.  Ball Locks, generally, have a manual PRV valve, while Pin Locks do not.  Ball Lock style lids are, in my opinion, superior because the manual PRV allows you to easily vent your keg as needed.  The good news is that, for standard kegs, the lids are the same size and can be interchanged.  That means you can use a Ball Lock style lid in a Pin Lock Keg.  See: What’s the Difference Between Ball Lock Kegs and Pin Lock Kegs?

Beverage Factory BLL-N-AUS Replacement Lid for Home brew Keg – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

bulk keg orings

 

Ball Lock Post Equipped Lid + Floating Dip Tube

Bigking Brew Keg Lid,Stainless Steel Homebrew Carbonation Keg Lid with Beer Tube Floating Ball for Kegland Kegs

More Info

From the product description, check product page for current description, price and availability:

  • 【Structural Features】With O‑ring and pressure relief valve, with good sealing performance, can hold pressure without leaks.
  • 【For Your Convenience】Labor‑saving design of safety relief valve, no need to keep lifting when deflated, just lift once and rotate 90° to continuously deflate.
  • 【Selected Materials】High‑quality 304 stainless steel material, high hardness, strong and durable.
  • 【Save Installation Time】It is compact and portable, easy to install and use, large handle makes installation easier .
  • 【Indispensable】Exquisite workmanship, long service life, which is a practical home brewing accessory.

 

  • Works on Pin Lock AND Ball Lock Kegs! One difference between Pin Lock and Ball Lock kegs is the type of lids that come with each.  Ball Locks, generally, have a manual PRV valve, while Pin Locks do not.  Ball Lock style lids are, in my opinion, superior because the manual PRV allows you to easily vent your keg as needed.  The good news is that, for standard kegs, the lids are the same size and can be interchanged.  That means you can use a Ball Lock style lid in a Pin Lock Keg.
  • Related: What’s the Difference Between Ball Lock Kegs and Pin Lock Kegs?
  • Rebuild Your Kegs! Rebuilding & Reconditioning Homebrew Kegs! – step by step process for rebuilding & reconditioning homebrew kegs

Bigking Brew Keg Lid,Stainless Steel Homebrew Carbonation Keg Lid with Beer Tube Floating Ball for Kegland Kegs – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

My explanation of how floating dip tubes work…

Continue reading →

Ball Lock Keg Carbonation Lid and Stone

Home Brew Cornelius Style Keg Carbonation Lid Kit with 0.5 Micron Diffusion Stone Seal for Cornelius Corny Beer

Use to assist in force carbonating your homebrew.

More Info


Highlighted Features
  • Material and Application : This keg carbonation lid is made of high quality stainless steel materials, which is sturdy, and non-, ensures long term durability and reliability. It fits great for all standard oval lid kegs, such as fire stone keg, cornelius keg, lock keg and other normal corny kegs.
  • Built-in Carbonation Stone : This home brew cornelius keg lid comes with built-in carbonation stone and stainless lock post, silicon keg lid seal, which provides the easiest way to carbonate kegs. Shake no more with this convenient kit that makes force carbonating your corny keg a breeze.
  • in Use : This stainless steel pressure relief valve lasts a longthan the plastic one, you don’t need to change the valve frequently. It also can replace your old bent, dented, or leaking lids.
  • How to Sanitize and : You can take the keg lid into acid to sanitize before and after each use, and boiled the 0.5diffusion stone in water to sanitize.
  • How to Use : Install the kit into the opening of a keg and simply attach gas disconnect to the plug on the lid. Set the regulator to the desired CO2 setting and wait until desired carbonation level is achieved in the beverage.
Learn More

 

Use to help speed up carbonation, as a spare keg lid, for testing, dialing in inline regulators and more. Photo of a similar lid being used with my Spunding Valve.

Home Brew Cornelius Style Keg Carbonation Lid Kit with 0.5Diffusion Stone Seal for Cornelius Corny Beer – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Compare: at MoreBeer – similar function but not identical

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

New Replacement Keg Lid by Beverage Factory [Ball Lock & Pin Lock]

Beverage Factory BLL-N-AUS Replacement Lid for Home brew Keg

Beverage Factory BLL-N-AUS Replacement Lid for Home brew Keg

From the product description, check product page for current description, price and availability:

This is a universal replacement lid for home brew/soda kegs. BRAND new lid comes with closure O-Ring pressure release Valve with sturdy 1 inch metal ring to relieve pressure out of your keg.

One difference between Pin Lock and Ball Lock kegs is the type of lids that come with each.  Ball Locks, generally, have a manual PRV valve, while Pin Locks do not.  Ball Lock style lids are, in my opinion, superior because the manual PRV allows you to easily vent your keg as needed.  The good news is that, for standard kegs, the lids are the same size and can be interchanged.  That means you can use a Ball Lock style lid in a Pin Lock Keg.  See: What’s the Difference Between Ball Lock Kegs and Pin Lock Kegs?

Beverage Factory BLL-N-AUS Replacement Lid for Home brew Keg – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

bulk keg orings

 

Ball Lock Keg Carbonation Lid by UP100

UP100 Carbonation Corny Beer Keg Lid Cornelius Style In-built Pin/ball Lock Gas Disconnect Homebrew Kegging

Keg Carbonation Lid by UP100

From the product description, check product page for current description, price and availability:

  • This universal replacement lid for soda kegs (corny kegs) is completely new–not refurbished.
  • It fits all ball-lock and pin-lock soda kegs that require the standard oval lid.
  • It has a replaceable pressure relief valve and includes the NEW rubber O-ring, ball lock post with poppet valve.
  • Material: stainless steel
  • New oval keg lid with O-ring

UP100 Carbonation Corny Beer Keg Lid Cornelius Style In-built Pin/ball Lock Gas Disconnect Homebrew Kegging


If you’re looking for something that includes a diffusion stone – UP100 Homebrew Cornelius Style Keg Carbonation Lid Kit With 0.5 Micron Diffusion Stone

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

New Replacement Keg Lid by Beverage Factory [Ball Lock & Pin Lock]

Beverage Factory BLL-N-AUS Replacement Lid for Home brew Keg

Beverage Factory BLL-N-AUS Replacement Lid for Home brew Keg

From the product description, check product page for current description, price and availability:

This is a universal replacement lid for home brew/soda kegs. BRAND new lid comes with closure O-Ring pressure release Valve with sturdy 1 inch metal ring to relieve pressure out of your keg.

One difference between Pin Lock and Ball Lock kegs is the type of lids that come with each.  Ball Locks, generally, have a manual PRV valve, while Pin Locks do not.  Ball Lock style lids are, in my opinion, superior because the manual PRV allows you to easily vent your keg as needed.  The good news is that, for standard kegs, the lids are the same size and can be interchanged.  That means you can use a Ball Lock style lid in a Pin Lock Keg.  See: What’s the Difference Between Ball Lock Kegs and Pin Lock Kegs?

Beverage Factory BLL-N-AUS Replacement Lid for Home brew Keg – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

bulk keg orings

 

Brand New Universal Replacement Keg Lid by Beverage Factory [Ball Lock & Pin Lock]

Beverage Factory BLL-N-AUS Replacement Lid for Home brew Keg

Beverage Factory BLL-N-AUS Replacement Lid for Home brew Keg

From the product description, check product page for current description, price and availability:

This is a universal replacement lid for home brew/soda kegs. BRAND new lid comes with closure O-Ring pressure release Valve with sturdy 1 inch metal ring to relieve pressure out of your keg.

One difference between Pin Lock and Ball Lock kegs is the type of lids that come with each.  Ball Locks, generally, have a manual PRV valve, while Pin Locks do not.  Ball Lock style lids are, in my opinion, superior because the manual PRV allows you to easily vent your keg as needed.  The good news is that, for standard kegs, the lids are the same size and can be interchanged.  That means you can use a Ball Lock style lid in a Pin Lock Keg.  See: What’s the Difference Between Ball Lock Kegs and Pin Lock Kegs?

Beverage Factory BLL-N-AUS Replacement Lid for Home brew Keg – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

bulk keg orings

 

Ferroday Carbonation Keg Lid + Diffusion Air Stone & Tubing

FERRODAY Carbonation Keg Lid Cornelius Keg Lid Soda Beer Forced Carbonation Homebrew Carbonator Stainless Steel 304 Carbonation Keg Lid with Diffusion Stone 20" Tube - Oval Keg Lid

Ferroday Ball Lock Carbonation Lid with Diffusion Stone

More Info

From the product description, check product page for current description, price and availability:

  • 【Includes All You Need】Keg lid + Air stone + 20 inch tubing; All the metal parts are made of SS304, the head of the pressure release valve is made of solid ABS, food safe tubing, gaskets, all sturdy and wear-resistant.
  • 【Widely Used for Home Brew】 Widely used to carbonate beer, soda, juice, water and even sparkling water. Fits to all the homebrew kegs that require a standard oval lid, normally called: corny keg/cornelius keg/ ball lock keg…This is a perfect choice for keg lid replacement!
  • 【Best Carbonation & No More Shaking】Forced Beer Carbonation: the diffusion stone will send a tremendous number of gas bubbles out through the beer and the miniscule bubbles will create a huge amount of surface area to help absorb CO2 rapidly into the beer! No need to shake the keg during carbonation anymore!
  • 【Safe Pressure Release & Cleaning Tips】 1. For safety concerns, the valve will automatically open up when pressure in the keg reaches 70 psi; 2. Please release the pressure in keg before open the keg. 3. Please clean the kit before and after each use, and please note the diffusion stone needs to be boiled in water to unclog pores.

 

This has a ball lock post on it that has in inlet on the inside of the keg. That inlet connects to tubing which in turn connections to a carbonation stone. This should work on standard ball lock and pin lock kegs, although you’ll need a ball lock QD to connect to it.

How do these work?  My theory… CO2 is dispersed through the stone into solution. This causes a small amount of movement in the liquid, this movement helps to the solution to come to equilibrium more quickly than simple head space pressure. I’m not saying this is a steady flow of bubbles, my guess is a slow, periodic occurrence, enough to speed up the process. This is a theory.

FERRODAY Carbonation Keg Lid Cornelius Keg Lid Soda Beer Forced Carbonation Homebrew Carbonator Stainless Steel 304 Carbonation Keg Lid with Diffusion Stone 20″ Tube – Oval Keg Lid – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Brand New Universal Replacement Keg Lid by Beverage Factory [Ball Lock & Pin Lock]

Beverage Factory BLL-N-AUS Replacement Lid for Home brew Keg

Beverage Factory BLL-N-AUS Replacement Lid for Home brew Keg

From the product description, check product page for current description, price and availability:

This is a universal replacement lid for home brew/soda kegs. BRAND new lid comes with closure O-Ring pressure release Valve with sturdy 1 inch metal ring to relieve pressure out of your keg.

One difference between Pin Lock and Ball Lock kegs is the type of lids that come with each.  Ball Locks, generally, have a manual PRV valve, while Pin Locks do not.  Ball Lock style lids are, in my opinion, superior because the manual PRV allows you to easily vent your keg as needed.  The good news is that, for standard kegs, the lids are the same size and can be interchanged.  That means you can use a Ball Lock style lid in a Pin Lock Keg.  See: What’s the Difference Between Ball Lock Kegs and Pin Lock Kegs?

Beverage Factory BLL-N-AUS Replacement Lid for Home brew Keg – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

bulk keg orings

 

Great For Father’s Day… William’s Home Brewery – on Sale for $103.99

William's Bottling Home Brewery

William’s Bottling Home Brewery

More Info

From the product description, check product page for current description, price and availability:

Why Brew at Home?

If you are like most home brewers, you have a strong appreciation of fine beer, as well as an intrinsic curiosity into how it is made. Why buy a William’s Home Brewery? The quality of the final beer is only as good as the quality and freshness of the ingredients used, and quality brewing is only possible when basic brewing techniques are learned and followed. In addition, easy to use, well-designed equipment helps to make brewing a relaxing, enjoyable experience. Beer is not like wine. It is best when fresh, then deteriorates after 2 to 4 months. One of the great things about home brewing is knowing how fresh the beer is you are drinking. Unlike craft beer with an unknown production date, when you brew a William’s Kit, you can drink it at its prime every time. You will also save money.

Choose your First William’s Brewing Kit
When you order our Home Brewery, pick your first William’s Brewing Kit at a savings over separate purchase prices. Our kits are unique because they include William’s syrup malt extracts, condensed at low temperatures for a full grain flavor, fresh flavoring and aromatic hops, yeast strains specially selected to enhance the flavor of the finished beer, priming sugar, and illustrated brew-by-number instructions. Every kit has been repeatedly test-brewed in the William’s Brewlab to achieve a perfectly balanced blend of malt and hop flavors, and every kit on the selection list has been chosen because it is easy for beginners to brew.

Instruction & Support
All William’s Kits include brew-by-number kit instructions. We also include the fifth edition of Home Beermaking, an excellent beginners book. After you read the included book and brew a few batches, you will find that home brewing can be as simple or as complex as you want it to be. To help you progress further, purchase of our brewery also gives you access to the William’s Customer Support line (either by phone or email), so you can get your brewing questions answered.

Traditional or Electric Brewing Kettle?
A 7 gallon or larger brewing kettle is needed for boiling the wort. We make this optional so you can choose between a traditional stainless brewing pot with valve, or a stand alone electric kettle so you can brew anywhere there is a 110 volt plug, and not be dependent on a stove or outdoor burner.

Wort Chiller Option:
We highly recommend a copper wort chiller to quickly cool your just boiled wort (unfermented beer) so fermentation can start as soon as possible, minimizing the risk of bacterial infection (copper transfers heat better than stainless). If you choose the copper Wort Chiller option, you will save $20.00 over separate purchase prices.

Included Equipment:
Included is a Siphonless Fermenter, which features a transfer valve, airlock, gasketed lid, and gallon markers that are easy to read due to the translucent plastic used. The included Priming Tank includes a bottling valve with a thermoplastic tube attachment that eliminates siphoning and makes bottling (or kegging) easy and fast. A kit is also included to convert your Priming Tank to a Secondary Fermenter if you need a secondary for a particular brew. A 18″ plastic stirring spoon is included to help you stir in the carbonating sugar. For the critical measurement which determines when the beer is ready to bottle, our handmade glass hydrometer features 1 degree calibrations for precise, easy to see readings, and includes a glass sample tube. For testing the temperature of the beer, a stainless steel dial thermometer is provided, which includes a calibration nut. In addition, transfer tubing is provided to transfer from your fermenter to the priming tank. To clean your equipment (vital to prevent sour beer), Brewer’s Edge Cleanser is included (enough to make 16 gallons of working solution). To clean your bottles, our bottle brush is included.

This is For Those Who Plan To Bottle Their Beer
This Brewery is set up for those who plan to bottle their own beer. The included Priming Tank includes a bottling valve for easy priming and bottle filling. Bottles can be salvaged from commercial beers (any beer bottle without a twist cap can be salvaged) or you can purchase bottles by going here. You will need 48 twelve ounce or equivalent bottles per 5 gallon batch.

Save $31.00 Over Separate Purchase Prices!
When you buy this package with an included kit, you save at least $31.00 over separate purchase prices. Get everything you need to get going and save money.

For a packing list of included items, click HERE.

Needed but not included: 48 twelve ounce beer bottles or equivalent. Salvage your own (any beer bottles without a twist cap will work), or purchase separately.

 

William’s Brewing has this setup on sale for $103.99

Shipping is free or reasonably priced flat rate to addresses in the contiguous US depending on your order size for most items.

William’s Bottling Home Brewery

Check sale or product page for current availability & pricing


This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

Keg Lids With Hang Tab Lid – makes dry hopping easy – $16.99 via William’s Brewing Keg Parts Sale

Keg Lid With Hang Tab

Keg Lid With Hang Tab via William’s Brewing

More Info

From the product description, check product page for current description, price and availability:

New lid with a hang tab welded on the bottom for hanging our Keg Infuser Ball, Keg Infuser Tube, and other straining bags. This fits Cornelius, Firestone, and Spartanburg brand kegs with 3″ by 3 1/2” oval lids. Includes a integral pressure relief valve. Maximum pressure 120 PSI. Includes a lid sealing O ring.

 

  • Hang Tabs! Keg Lid With Hang Tab – Unique hang tab design makes it easy to dry hop in the keg.
  • Manual vs Automatic PRV:  “Automatic PRV: sounds better than “Manual PRV”, but in my opinion, the opposite is true.  Both styles, generally, automatically vent at a set pressure for safety reasons.  Manual PRVs at the ability to…. manually activate the PRV.  That allows you to easily vent your keg as needed.  A tool is required to vent lids without manual PRV valves.
  • Works with both pin and ball lock kegs: In most cases, Pin lock and ball lock cornelius style keg lids are interchangeable from a size perspective.  That means you can, generally speaking, put a pepsi/ball lock style (manual prv) lid on a coke/pin lock style (no manual prv) keg.
  • An upgrade to pin lock style lids: In my book, that’s a solid upgrade.  See: What’s the Difference Between Ball Lock Kegs and Pin Lock Kegs?

This is discounted to just $16.99 via Wlliam’s Brewing’s Keg Parts Sale. Note: Discounted price reflected at checkout. Shipping is free or reasonably priced flat rate to addresses in the contiguous US depending on your order size for most items

Keg Lid With Hang Tab – Wlliam’s Brewing’s Keg Parts Sale – discounted prices reflected at checkout

Check sale or product page for current availability & pricing



This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. prod:wmshtl

Stainless Steel Keg Lids [Ball Lock & Pin Lock]

SANON Stainless Steel Carbonation Beer Keg Lid,Stainless Steel Carbonation Lid for Home Brew, Ball Lock Keg Lids Beer Making Tool

SANON Stainless Steel Beer Keg Lid

From the product description, check product page for current description, price and availability:

  • Made of stainless steel, high quality, rust resistant, sturdy and durable.
  • It fits all ball-lock and pin-lock soda kegs that require the standard oval lid.
  • It has a replaceable pressure relief valve and includes the new rubber o-ring, ball lock post with poppet valve.

One difference between Pin Lock and Ball Lock kegs is the type of lids that come with each.  Ball Locks, generally, have a manual PRV valve, while Pin Locks do not.  Ball Lock style lids are, in my opinion, superior because the manual PRV allows you to easily vent your keg as needed.  The good news is that, for standard kegs, the lids are the same size and can be interchanged.  That means you can use a Ball Lock style lid in a Pin Lock Keg.  See: What’s the Difference Between Ball Lock Kegs and Pin Lock Kegs?

SANON Stainless Steel Beer Keg Lid – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

bulk keg orings