Category Archives: Keg Parts

EIGHT Pin Lock Quick Disconnects [4xGas + 4xLiquid] + Swivel Nuts by PERA

Corny Keg Pin Lock Disconnect MFL Pin Lock Keg Connector Pin Lock Keg Fitting with Swivel Nuts Worm Clamps for Cornelius Style Pin Lock Keg Home Brewing PERA

Corny Keg Pin Lock Disconnect MFL Pin Lock Keg Connector Pin Lock Keg Fitting with Swivel Nuts Worm Clamps for Cornelius Style Pin Lock Keg Home Brewing PERA

More Info

Since You’re a Pin Lock Keg Owner:

Corny Keg Pin Lock Disconnect MFL Pin Lock Keg Connector Pin Lock Keg Fitting with Swivel Nuts Worm Clamps for Cornelius Style Pin Lock Keg Home Brewing PERA – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources
standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Homebrew Keg O-Rings at Amazon + Limited Time DEAL on Food Safe Alternatives

109 Silicone O-Ring, 70A Durometer, Red, 5/16" ID, 1/2" OD, 3/32" Width (Pack of 100)

Pictured: 109 Silicone O-Ring, 70A Durometer

These may be cheap, but wait…

Food Safe Materials

The problem: At one point I had an o-ring manufacturer reach out to me that had found this resource while trying to do some market research.  This manufacturer suggested that many of the products that homebrewer’s use are made out of industrial grade materials that should not be in contact with food & beverage products.  These materials could potentially contain materials that are not meant to be ingested.

Okay, that’s a little concerning.  It was at this point that I added a section to that resource that talked about the issue.  I also started adding disclaimers to posts when I was unsure whether or not materials were food grade.

The next problem: For whatever reason, in my experience, it’s extremely difficult to find offerings that claim to be safe for food contact.  Maybe some of the o-rings that are available are food safe, but very few are actually labeled as such.

Keep Reading Food Safe Replacement Keg O-Rings in Bulk

Important Note: Although the Amazon offerings listed here may be the right size for most keg applications, they aren’t necessarily appropriate for use with homebrew kegs.  As of this update they are not marked as appropriate for food use.  If you’re looking for food grade, o-rings, which I think you should be consider this supplier

Continue reading →

Ends Today: Valuebrew Labor Day Sale – Save on Bulk O-Rings – includes custom colors, Ball Lock Jumpers, Universal Poppets & More

For a short time, Valuebrew is discounting most of their gear including bulk food grade o-rings (i

Valuebrew offers a lineup of food grade keg replacement o-rings in bulk quantities.  Most offerings are silicone or EPDM with one Buna-N option.  Everything they carry is food grade, more info below.  They have some unique offerings like bulk pin lock size post o-rings, replacement universal poppet o-rings, bulk internal QD o-rings and color coded Blue and Green post o-rings

Some of these offerings are detailed in our Keg Rebuild How-To

Save  an EXTRA 15% when you spend $30 or more on select items at Valuebrew.  This stacks on top of existing discounts. Includes…

Use coupon code laborday with an order of $30 or more to get the deal

Continue reading →

Ends Soon: Valuebrew Labor Day Sale – Save on Bulk O-Rings – includes custom colors, Ball Lock Jumpers, Universal Poppets & More

For a short time, Valuebrew is discounting most of their gear including bulk food grade o-rings (i

Valuebrew offers a lineup of food grade keg replacement o-rings in bulk quantities.  Most offerings are silicone or EPDM with one Buna-N option.  Everything they carry is food grade, more info below.  They have some unique offerings like bulk pin lock size post o-rings, replacement universal poppet o-rings, bulk internal QD o-rings and color coded Blue and Green post o-rings

Some of these offerings are detailed in our Keg Rebuild How-To

Save  an EXTRA 15% when you spend $30 or more on select items at Valuebrew.  This stacks on top of existing discounts. Includes…

Use coupon code laborday with an order of $30 or more to get the deal

Continue reading →

FOUR Pin Lock Quick Disconnects [2xGas + 2xLiquid] by PERA

PERA 2 Pair Pin Lock coupler Barb Gas&Liquid Quick Disconnects Set

PERA 2 Pair Pin Lock coupler Barb Gas&Liquid Quick Disconnects Set by PERA

More Info


Highlighted Features
  • 1.Packing: Pin Lock Disconnect , Gray Colour for Gas IN, Black Colour for Liquid Out;
  • 2.Material: PBT Material for Pin Lock Quick Disconnect Body and Stainless Steel for Barb End;
  • 3.Use: The Pin Lock MFL Disconnects used for Cornelius style Pin Lock keg (Coke), Works for Beer or Soda;
  • 4.A Perfect Gift for Home Brewing Lovers;
  • 5.Guarantee: Quality Guarantee, any problem for Pin Lock Disconnect, Money Back or Replacement free.
Learn More

Since You’re a Pin Lock Keg Owner:

PERA 2 Pair Pin Lock coupler Barb Gas&Liquid Quick Disconnects Set – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Color Code Your Keg Post O-Rings For Easy Identification + Save with STACKING Deals – includes new yellow

Valuebrew carries two color schemes to color keg posts. Doing this allows you to quickly identify keg posts. Gray and Black match standard keg QD colors. Blue and Green are meant to be remembered by “Blue for Beer” and “Green for Gas”. All options are made from FDA rated silicone. Since they work equally well on gas and liquid posts you can also mix and match to come up with your own color coding standard.

Custom Color O-rings at Valuebrew!

Save with Stacking Deals…

valuebrew.com sale

For a short time, Valuebrew is discounting most of their gear including bulk food grade o-rings (i

Valuebrew offers a lineup of food grade keg replacement o-rings in bulk quantities.  Most offerings are silicone or EPDM with one Buna-N option.  Everything they carry is food grade, more info below.  They have some unique offerings like bulk pin lock size post o-rings, replacement universal poppet o-rings, bulk internal QD o-rings and color coded Blue and Green post o-rings

Some of these offerings are detailed in our Keg Rebuild How-To

Save  an EXTRA 15% when you spend $30 or more on select items at Valuebrew.  This stacks on top of existing discounts. Includes…

Use coupon code laborday with an order of $30 or more to get the deal

Continue reading →

Finally Back in Stock! Universal Poppets – 304 Stainless + Food Grade Silicone & RELIABLE O-Ring Replacements

universal poppets

Universal Poppets via Valuebrew

More Info

From the product description, check product page for current description, price and availability:

A Valuebrew Exclusive! Stainless Steel Universal Replacement Poppets with our Food Safe Silicone O-Rings.

These work with all standard Ball Lock and Pin Lock homebrew kegs.

Ever wonder what other universal poppet o-rings are made of? Us too, after all this is one of the most high contact o-rings in you draft beer setup. We took matters into our own hands and worked with our suppliers to source a 304 Stainless Steel + Food Grade Silicone option. Stainless steel construction on all the metal parts and premium quality food grade silicone for the o-ring.

Our pledge to you… Let’s face it, the stainless pieces in most universal replacement poppets should last a long, long time. How about the o-rings? Not so much… lost, broken, cracked, off smell. This is where our pledge comes in… we’ll always carry replacement o-rings for these universal poppets. No need to guess what size replacements to buy or completely replace your universal poppets because you don’t have a reliable source for replacements.

 

I use universal style poppets exclusively when rebuilding kegs. Finding the right OEM specific replacement poppets can be a chore. Beyond finding the right part number, these can be prohibitively expensive. Paying $10 to $14, or more, for an OEM poppet isn’t fun. In fact, if you really had to pay that, it may not even make sense to keep the keg.

I’ve long advocated to tossing OEM o-rings immediately. You don’t know what they’re made of, and you can’t get replacements. Replacing them immediately with a known quality o-ring and known part number before trimming to fit means you’ll be using the right materials and have a source for replacements.  See: Universal Poppet Tips & Tricks

Well… finally there’s an option that comes with quality o-rings made from the right materials out of the box!  Beyond that, Valuebrew has pledged to always carry replacement o-rings, so you’ll always have a source when the time comes for replacements.  Available in 5 and 10 packs with the option to add on a pack of replacement o-rings.

Back in stock!  These have been out of stock for months. We’ll the full story is they came back in stock a few weeks ago, but sold out so quickly that I wasn’t able to get a post up. So, as of this update… they’re back in stock after months of being sold out!  Get them while you can.

Universal Poppets

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

FLOTit 2.0 – Double Filter Floating Dip Tube, Made in USA

FLOTit 2.0 - No Beer Left Behind Floating Dip Tube with Double Filter Inlet (DFI) of 500/300 micron for always clear beer, less beer waste and no clogging. Made in USA.

FLOTit 2.0 – No Beer Left Behind Floating Dip Tube with Double Filter Inlet (DFI) of 500/300 micron for always clear beer, less beer waste and no clogging. Made in USA

More Info


Highlighted Features
  • NO-ARM-IN-KEG - all connections are made outside the keg.
  • NO NEED FOR DRY HOP TUBE - double filters of 300/500 micron keeps the poppet valve from clogging
  • NO BEER DUMPING - enjoy the very first pour instead of dumping it like with other floating dip tube
  • NO NEED FOR ADDED WEIGHT to avoid sucking foam
  • NO BEER LEFT BEHIND - unique designed to draw all the beer out. Little left on the yeast cake
Learn More

 

FLOTit 2.0 – No Beer Left Behind Floating Dip Tube with Double Filter Inlet (DFI) of 500/300 micron for always clear beer. Made in USA – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Check out our In Depth Hands on Review of FLOTit 2.0

FLOTit 2.0 -...image
FLOTit 2.0 - No Beer Left Behind Floating Dip Tube with Double Filter Inlet (DFI) of 500/300 micron for always clear beer, less beer waste and no clogging. Made in USA.
$29.00
FLOTit 2.0 with...image
FLOTit 2.0 with Max Headroom gas dip tube & a HOOK tool - No Beer Left Behind Floating Dip Tube with DFI for always clear beer, less beer waste and no clogging. Ideal for fermenting in kegs.
$34.00
FLOTit 2.0 –...image
FLOTit 2.0 – Double Filter Inlet (DFI) with 500/300 micron mesh for floating dip tube with a ball float for always clear beer, less beer waste, and no clogging.
$22.00
FLOTit 2.0 with...image
FLOTit 2.0 with UNI dip tube - No Beer Left Behind Floating Dip Tube with Double Filter Inlet (DFI) of 500/300 micron for always clear beer, less beer waste and no clogging.

My explanation of how this works…

When we carbonate a keg, pressure is being applied to the keg from the top, via the head space. Beer at the top carbonates first. That carbonation works it’s way down the keg. I’m sure there’s also some movement in the keg that helps to mix things up and distribute carbonation. But just sitting there, I think that mixing is a slow process. However it all works, practically speaking, the beer at the top carbonates more quickly compared to the beer at the bottom. This allows you to serve from the top accessing the more carbonated portion of the keg. It’s also a benefit for clarity because trub settles out heading downward. You can see this stratification in a glass carboy. As the beer starts to clear, the top clears first. I don’t think if this is exactly accurate, but I picture carbonation happening with the same sort of stratification until the beer reaches equilibrium and is equally carbonated throughout.

Continue reading →

FLOTit 2.0 – Double Filter Floating Dip Tube, Made in USA

FLOTit 2.0 - No Beer Left Behind Floating Dip Tube with Double Filter Inlet (DFI) of 500/300 micron for always clear beer, less beer waste and no clogging. Made in USA.

FLOTit 2.0 – No Beer Left Behind Floating Dip Tube with Double Filter Inlet (DFI) of 500/300 micron for always clear beer, less beer waste and no clogging. Made in USA

More Info


Highlighted Features
  • NO-ARM-IN-KEG - all connections are made outside the keg.
  • NO NEED FOR DRY HOP TUBE - double filters of 300/500 micron keeps the poppet valve from clogging
  • NO BEER DUMPING - enjoy the very first pour instead of dumping it like with other floating dip tube
  • NO NEED FOR ADDED WEIGHT to avoid sucking foam
  • NO BEER LEFT BEHIND - unique designed to draw all the beer out. Little left on the yeast cake
Learn More

 

FLOTit 2.0 – No Beer Left Behind Floating Dip Tube with Double Filter Inlet (DFI) of 500/300 micron for always clear beer. Made in USA – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Check out our In Depth Hands on Review of FLOTit 2.0

FLOTit 2.0 -...image
FLOTit 2.0 - No Beer Left Behind Floating Dip Tube with Double Filter Inlet (DFI) of 500/300 micron for always clear beer, less beer waste and no clogging. Made in USA.
$29.00
FLOTit 2.0 with...image
FLOTit 2.0 with Max Headroom gas dip tube & a HOOK tool - No Beer Left Behind Floating Dip Tube with DFI for always clear beer, less beer waste and no clogging. Ideal for fermenting in kegs.
$34.00
FLOTit 2.0 –...image
FLOTit 2.0 – Double Filter Inlet (DFI) with 500/300 micron mesh for floating dip tube with a ball float for always clear beer, less beer waste, and no clogging.
$22.00
FLOTit 2.0 with...image
FLOTit 2.0 with UNI dip tube - No Beer Left Behind Floating Dip Tube with Double Filter Inlet (DFI) of 500/300 micron for always clear beer, less beer waste and no clogging.

My explanation of how this works…

When we carbonate a keg, pressure is being applied to the keg from the top, via the head space. Beer at the top carbonates first. That carbonation works it’s way down the keg. I’m sure there’s also some movement in the keg that helps to mix things up and distribute carbonation. But just sitting there, I think that mixing is a slow process. However it all works, practically speaking, the beer at the top carbonates more quickly compared to the beer at the bottom. This allows you to serve from the top accessing the more carbonated portion of the keg. It’s also a benefit for clarity because trub settles out heading downward. You can see this stratification in a glass carboy. As the beer starts to clear, the top clears first. I don’t think if this is exactly accurate, but I picture carbonation happening with the same sort of stratification until the beer reaches equilibrium and is equally carbonated throughout.

Continue reading →

Valuebrew Labor Day Sale – Save on Bulk O-Rings – includes custom colors, Ball Lock Jumpers, Universal Poppets & More

For a short time, Valuebrew is discounting most of their gear including bulk food grade o-rings (i

Valuebrew offers a lineup of food grade keg replacement o-rings in bulk quantities.  Most offerings are silicone or EPDM with one Buna-N option.  Everything they carry is food grade, more info below.  They have some unique offerings like bulk pin lock size post o-rings, replacement universal poppet o-rings, bulk internal QD o-rings and color coded Blue and Green post o-rings

Some of these offerings are detailed in our Keg Rebuild How-To

Save  an EXTRA 15% when you spend $30 or more on select items at Valuebrew.  This stacks on top of existing discounts. Includes…

Use coupon code laborday with an order of $30 or more to get the deal

Continue reading →

Hands on Review: FLOTit 2.0 Floating Dip Tube w/DFI, Double Filter Inlet

Updated: September 3, 2024

This review is by Homebrew Finds Contributor Brad Probert.  Brad is an engineer, expert homebrewer and experienced reviewer.  Grab a link to Brad’s website at the end of this review.

FLOTit Floating Dip Tube

Floating dip tubes are a hot commodity in the homebrewing world lately.  Many people are ditching their fixed steel tubes and replacing them with a length of silicone tubing attached to a stainless ball float.  If you’ve been living under a rock and don’t know the point of the floating dip tube, it’s pretty simple.  It floats on top of your beer so that as you draw out beer, you get clear beer from the top while everything else precipitates out and makes its way to the bottom

Check Pricing & Availability:

Also available at Keg Connection: FLOTit 2.0 Stainless Steel Floating Dip Tube | NO BEER LEFT BEHIND

A version is also available that works as an upgrade to traditional ball float floating dip tubes

FLOTit 2.0 – Double Filter Inlet (DFI) with 500/300 micron mesh for floating dip tube with a ball float for always clear beer, less beer waste, and no clogging. Best upgrade for pressure fermenter – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

FLOTit 2.0 -...image
FLOTit 2.0 - No Beer Left Behind Floating Dip Tube with Double Filter Inlet (DFI) of 500/300 micron for always clear beer, less beer waste and no clogging. Made in USA.
$29.00
FLOTit 2.0 with...image
FLOTit 2.0 with Max Headroom gas dip tube & a HOOK tool - No Beer Left Behind Floating Dip Tube with DFI for always clear beer, less beer waste and no clogging. Ideal for fermenting in kegs.
$34.00
FLOTit 2.0 –...image
FLOTit 2.0 – Double Filter Inlet (DFI) with 500/300 micron mesh for floating dip tube with a ball float for always clear beer, less beer waste, and no clogging.
$22.00
FLOTit 2.0 with...image
FLOTit 2.0 with UNI dip tube - No Beer Left Behind Floating Dip Tube with Double Filter Inlet (DFI) of 500/300 micron for always clear beer, less beer waste and no clogging.

Related:

Related: Fermenting Under Pressure!

Continue reading →

FLOTit 2.0 – Double Filter Floating Dip Tube, Made in USA

FLOTit 2.0 - No Beer Left Behind Floating Dip Tube with Double Filter Inlet (DFI) of 500/300 micron for always clear beer, less beer waste and no clogging. Made in USA.

FLOTit 2.0 – No Beer Left Behind Floating Dip Tube with Double Filter Inlet (DFI) of 500/300 micron for always clear beer, less beer waste and no clogging. Made in USA

More Info


Highlighted Features
  • NO-ARM-IN-KEG - all connections are made outside the keg.
  • NO NEED FOR DRY HOP TUBE - double filters of 300/500 micron keeps the poppet valve from clogging
  • NO BEER DUMPING - enjoy the very first pour instead of dumping it like with other floating dip tube
  • NO NEED FOR ADDED WEIGHT to avoid sucking foam
  • NO BEER LEFT BEHIND - unique designed to draw all the beer out. Little left on the yeast cake
Learn More

 

FLOTit 2.0 – No Beer Left Behind Floating Dip Tube with Double Filter Inlet (DFI) of 500/300 micron for always clear beer. Made in USA – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Check out our In Depth Hands on Review of FLOTit 2.0

FLOTit 2.0 -...image
FLOTit 2.0 - No Beer Left Behind Floating Dip Tube with Double Filter Inlet (DFI) of 500/300 micron for always clear beer, less beer waste and no clogging. Made in USA.
$29.00
FLOTit 2.0 with...image
FLOTit 2.0 with Max Headroom gas dip tube & a HOOK tool - No Beer Left Behind Floating Dip Tube with DFI for always clear beer, less beer waste and no clogging. Ideal for fermenting in kegs.
$34.00
FLOTit 2.0 –...image
FLOTit 2.0 – Double Filter Inlet (DFI) with 500/300 micron mesh for floating dip tube with a ball float for always clear beer, less beer waste, and no clogging.
$22.00
FLOTit 2.0 with...image
FLOTit 2.0 with UNI dip tube - No Beer Left Behind Floating Dip Tube with Double Filter Inlet (DFI) of 500/300 micron for always clear beer, less beer waste and no clogging.

My explanation of how this works…

When we carbonate a keg, pressure is being applied to the keg from the top, via the head space. Beer at the top carbonates first. That carbonation works it’s way down the keg. I’m sure there’s also some movement in the keg that helps to mix things up and distribute carbonation. But just sitting there, I think that mixing is a slow process. However it all works, practically speaking, the beer at the top carbonates more quickly compared to the beer at the bottom. This allows you to serve from the top accessing the more carbonated portion of the keg. It’s also a benefit for clarity because trub settles out heading downward. You can see this stratification in a glass carboy. As the beer starts to clear, the top clears first. I don’t think if this is exactly accurate, but I picture carbonation happening with the same sort of stratification until the beer reaches equilibrium and is equally carbonated throughout.

Continue reading →

FLOTit 2.0 – Double Filter Floating Dip Tube, Made in USA

FLOTit 2.0 - No Beer Left Behind Floating Dip Tube with Double Filter Inlet (DFI) of 500/300 micron for always clear beer, less beer waste and no clogging. Made in USA.

FLOTit 2.0 – No Beer Left Behind Floating Dip Tube with Double Filter Inlet (DFI) of 500/300 micron for always clear beer, less beer waste and no clogging. Made in USA

More Info


Highlighted Features
  • NO-ARM-IN-KEG - all connections are made outside the keg.
  • NO NEED FOR DRY HOP TUBE - double filters of 300/500 micron keeps the poppet valve from clogging
  • NO BEER DUMPING - enjoy the very first pour instead of dumping it like with other floating dip tube
  • NO NEED FOR ADDED WEIGHT to avoid sucking foam
  • NO BEER LEFT BEHIND - unique designed to draw all the beer out. Little left on the yeast cake
Learn More

 

FLOTit 2.0 – No Beer Left Behind Floating Dip Tube with Double Filter Inlet (DFI) of 500/300 micron for always clear beer. Made in USA – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Check out our In Depth Hands on Review of FLOTit 2.0

FLOTit 2.0 -...image
FLOTit 2.0 - No Beer Left Behind Floating Dip Tube with Double Filter Inlet (DFI) of 500/300 micron for always clear beer, less beer waste and no clogging. Made in USA.
$29.00
FLOTit 2.0 with...image
FLOTit 2.0 with Max Headroom gas dip tube & a HOOK tool - No Beer Left Behind Floating Dip Tube with DFI for always clear beer, less beer waste and no clogging. Ideal for fermenting in kegs.
$34.00
FLOTit 2.0 –...image
FLOTit 2.0 – Double Filter Inlet (DFI) with 500/300 micron mesh for floating dip tube with a ball float for always clear beer, less beer waste, and no clogging.
$22.00
FLOTit 2.0 with...image
FLOTit 2.0 with UNI dip tube - No Beer Left Behind Floating Dip Tube with Double Filter Inlet (DFI) of 500/300 micron for always clear beer, less beer waste and no clogging.

My explanation of how this works…

When we carbonate a keg, pressure is being applied to the keg from the top, via the head space. Beer at the top carbonates first. That carbonation works it’s way down the keg. I’m sure there’s also some movement in the keg that helps to mix things up and distribute carbonation. But just sitting there, I think that mixing is a slow process. However it all works, practically speaking, the beer at the top carbonates more quickly compared to the beer at the bottom. This allows you to serve from the top accessing the more carbonated portion of the keg. It’s also a benefit for clarity because trub settles out heading downward. You can see this stratification in a glass carboy. As the beer starts to clear, the top clears first. I don’t think if this is exactly accurate, but I picture carbonation happening with the same sort of stratification until the beer reaches equilibrium and is equally carbonated throughout.

Continue reading →

Last Call: Color Code Your Keg Post O-Rings For Easy Identification + Save with STACKING Deals

Valuebrew carries two color schemes to color keg posts. Doing this allows you to quickly identify keg posts. Gray and Black match standard keg QD colors. Blue and Green are meant to be remembered by “Blue for Beer” and “Green for Gas”. All options are made from FDA rated silicone. Since they work equally well on gas and liquid posts you can also mix and match to come up with your own color coding standard.

Custom Color O-rings at Valuebrew!

Save with Stacking Deals…

valuebrew.com sale

For a short time, Valuebrew is discounting most of their gear including bulk food grade o-rings (i

Valuebrew offers a lineup of food grade keg replacement o-rings in bulk quantities.  Most offerings are silicone or EPDM with one Buna-N option.  Everything they carry is food grade, more info below.  They have some unique offerings like bulk pin lock size post o-rings, replacement universal poppet o-rings, bulk internal QD o-rings and color coded Blue and Green post o-rings

Some of these offerings are detailed in our Keg Rebuild How-To

Save  an EXTRA 15% when you spend $30 or more on select items at Valuebrew.  This stacks on top of existing discounts. Includes…

Use coupon code colorcode4u with an order of $30 or more to get the deal

Continue reading →

Ball Lock Keg Carbonation Lid and Stone… $24.86

Brewland Corny Carbonation Keg Lid, Cornelius Soda Keg Lids for Quick Forced Carbonation, Ball Lock Keg Lid with Diffusion Stone, Pressure Relief Valve, Clamp and Tube for Homebrew Beer and Beverage

Brewland Corny Carbonation Keg Lid

More Info


Highlighted Features
  • Brewland corny carbonation keg lid is perfect for quick forced carbonating and keeping a tight seal, speeding up your time on carbonating your beer or other beverage
  • The maximum pressure is 130psi, and the pressure relief valve on the keg lid will automatically relieve pressure for safety
  • This cornelius soda keg lid is made of premium stainless steel 304
  • Brewland cornelius carbonation keg lid set includes: 1pcs brand new keg lid with post and pressure relief valve, 1pcs 0.5 micron diffusion stone, 2pcs hose clamps, 1pcs PVC tube (23 inch)
  • This carbonation lid can fit cornelius keg and is widely used to carbonate beer, mead, soda, cider, juice, even seltzer water, and so on
Learn More

 

Use to help speed up carbonation, as a spare keg lid, for testing, dialing in inline regulators and more. Photo of a similar lid being used with my Spunding Valve.

8/26 2:30 AM Central: This is selling for just $24.86. Shipping is also free to many US addresses with Prime Membership [Try Prime for Free] or a qualifying order.  Prices, promotions and availability can change quickly.  Check product page for current info – More About Prices

Brewland Corny Carbonation Keg Lid, Cornelius Soda Keg Lids for Quick Forced Carbonation, Ball Lock Keg Lid with Diffusion Stone, Pressure Relief Valve, Clamp and Tube for Homebrew Beer and Beverage – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Compare: at MoreBeer – similar function but not identical

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

All Lid Options Back in Stock… BULK Food Safe Replacement Keg LID O-Rings

Keg Lid O-Rings - Food Safe Silicone

Valuebrew offers a lineup of food grade keg replacement o-rings in bulk quantities.  Choose from silicone, buna-n and even EPDM.  Everything they carry is food grade, more info below.  They have some unique offerings like bulk pin lock size post o-rings, replacement universal poppet o-rings, bulk internal QD o-rings and color coded Blue and Green post o-rings

Some of these offerings are detailed on our recently released Keg Rebuild How-To

Bulk pricing.  All variations are available in bulk quantities.

  • Valuebrew has struggled with availability on some of their options.  This has been particularly true of their keg lid o-rings.
  • As of this posting, all keg lid o-rings are back in stock.
  • Choose from silicone, epdm and buna-n. All fda rated for food contact.
  • Out of stock Again?  We keep a close eye on these.  Connect with HBF and we’ll let you know when they come back.

Complete Lineup; Food Safe Keg O-Rings

More about food safe materials:

For whatever reason, it’s difficult to find food safe keg o-rings.  Maybe some of the o-rings that are available are food safe, but very few are actually labeled as such.

The fact is we’re putting beer (food) in our kegs and we should be using food safe materials whenever we can.  More Info: Food Safe Replacement Keg O-Rings

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. pst:vbfsilid

STACKING Deals on FLOTit 2.0 – Double Filter Floating Dip Tube, Made in USA! + Hands on Review

FLOTit 2.0 Stainless Steel Floating Dip Tube | NO BEER LEFT BEHIND

FLOTit 2.0 Stainless Steel Floating Dip Tube | NO BEER LEFT BEHIND

More Info

From the product description, check product page for current description, price and availability:

Are you seeking crystal-clear beer right from the tap? Introducing the FLOTit 2.0 Floating Dip Tube, your solution for filtering out hop particles before they enter your beer lines. This device features a compact stainless steel float, measuring just 1½ inches in diameter!

Setting up the FLOTit 2.0 is quick and easy: simply detach the beer post from your ball lock keg, remove the existing long dip tube, and replace it with the shorter tube provided. Next, connect the silicone tubing to the tube’s underside. Submerge the entire setup in the keg and trim the tubing to allow the float to sit at the keg’s bottom.

The package comes complete with a 22-inch silicone tube, a dip tube adapter, a 304-grade stainless steel float equipped with a stainless mesh filter, and additional replacement seal gaskets for the mesh filter.

 

  • Keg Connection is now carrying FLOTit 2.0! This is already one of Keg Connection’s most popular products
  • These are on sale for $29.95.
  • Stacking coupon code HBF5OFF makes FLOTit 2.0 just $28.45 at checkout.
  • These also fall under Keg Connection’s Flat Rate Shipping Promotion.  Your entire order ships for one flat rate, no matter how much you order, to addresses in the contiguous US

FLOTit 2.0 Stainless Steel Floating Dip Tube | NO BEER LEFT BEHIND

Also: Keg Deals at Keg Connection!

Works with AEB Kegs!  Hands on Review

Check out our In Depth Hands on Review of FLOTit 2.0

My explanation of how this works…

When we carbonate a keg, pressure is being applied to the keg from the top, via the head space. Beer at the top carbonates first. That carbonation works it’s way down the keg. I’m sure there’s also some movement in the keg that helps to mix things up and distribute carbonation. But just sitting there, I think that mixing is a slow process. However it all works, practically speaking, the beer at the top carbonates more quickly compared to the beer at the bottom. This allows you to serve from the top accessing the more carbonated portion of the keg. It’s also a benefit for clarity because trub settles out heading downward. You can see this stratification in a glass carboy. As the beer starts to clear, the top clears first. I don’t think if this is exactly accurate, but I picture carbonation happening with the same sort of stratification until the beer reaches equilibrium and is equally carbonated throughout.

Continue reading →

Hands on Review: Valuebrew’s EPDM Keg O-Rings

Updated: August 21, 2024

This review is by Homebrew Finds Contributor Brad Probert.  Brad is an engineer, expert homebrewer and experienced reviewer.  Grab a link to Brad’s website at the end of this review.

In the world of homebrewing, you can surround yourself by as little or as much science as you want. O-rings, seals, and gaskets come in different varieties in homebrewing. The most commonly found material is silicone, and it’s often elevated as the “best” material. As with most things, there are benefits/drawbacks to each different type of material. Silicone has a very wide temperature range, making a good gasket seal choice at cold temperatures, as well as at hot/boiling temperatures. Its high flexibility makes it well-suited to sealing uneven gaps or perhaps non-ideal sealing surfaces.

Some Old Dip Tube O-rings Were in Rough Shape

However, one of its drawbacks is it does not handle acid-based cleaners well, so Star San sanitizing can deteriorate the material. The occasional sanitizing spray might not be a significant degradation, but you definitely don’t want to soak silicone parts in Star San for extended periods of time. When you’re dealing with the cold side like fermentors or kegs, you’ll be sanitizing frequently, and this compatibility might be a consideration for you.

Check Current Price & Availability, Review Continues Below:

Note that Valuebrew has regularly struggled keeping products in stock. If something you’re looking for is out of stock, connect with us and we’ll keep you up to date on availability issues.


Continue reading →

Pin Lock to Ball Lock Conversion Kit?

Lock Keg Posts,304 stainless Lock Keg Posts set Type keg Lock Post Adapter 9/16in‑18 Brewing Accessory Adapter Kit

Lock Keg Posts,304 stainless Lock Keg Posts set Type keg Lock Post Adapter 9/16in‑18 Brewing Accessory Adapter Kit

More Info


Highlighted Features
  • Convenient O :Ball Lock Post Ball lock with O‑, with good sealing performance to prevent leakage of gas and liquid connections.
  • Stainless Steel Material:Lock Keg Posts Selected high‑quality 304 stainless steel material, high hardness, strong and .
  • Pressure Resistance:Keg Posts Parts Without welding, higher pressure resistance, and pressure resistance.
  • Easy to Install：Ball Lock Connector It is compact and portable, no need tools, can be installed and used directly to help you brew craft beer.
  • Professional Made：Keg Ball Lock Post Exquisite workmanship, long service life, which is a practical home brewing accessory.
Learn More

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

This set appears to include Universal Poppets – check out our Tips on Installing and Adjusting Universal Poppets

Commentary from HBF: This is currently getting generally poor reviews. I wonder if what’s happening is that this combo is really a pin lock to ball lock conversion instead of ball lock replacement posts. Generally speaking ball lock kegs have 19/32’’-18 and pin lock kegs have 9/16in‑18 threads. These have 9/16in‑18. This leads me to think this may actually be a conversion kit.

Lock Keg Posts,304 stainless Lock Keg Posts set Type keg Lock Post Adapter 9/16in‑18 Brewing Accessory Adapter Kit – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Keg Post Conversion Kit (pin lock to ball lock) 9/16-18 Thread


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

bulk keg orings

 


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon