Category Archives: Kegerator

Hands on Review: Safecid Beer Line Cleaner

This review is by Homebrew Finds Contributor Brad Probert.  Brad is an engineer, expert homebrewer and experienced reviewer.  Grab a link to Brad’s website at the end of this review.

Safecid Cleaner

Those of us that have kegerators know that cleaning the beer lines is a necessary thing. We also know that cleaning them is a pretty unexciting event. Products for cleaning them are generally unexciting as well because they’re all pretty similar. There is one product that is different- Safecid Beer Line Cleaner.


Check Current Pricing & Availability:

These are affiliate links. Note that multiple variations of these products may be available, as such a different version may appear at these links


Safecid has both an acid cleaner and an alkaline/caustic cleaner. The cleaners are as potent as other cleaners, but their patented chemistry makes it non-toxic. This means it is neither harmful to people (skin, eyes), nor harmful to the water supply when rinsed down the drain. And that’s what makes it different from other cleaners.

Alkaline Cleaner Distinct Blue Color

See-Through Volume Markings

The Brewer’s Association publishes draft beer cleaning guidelines for bars/breweries. They recommend a cleaning period of every 2 weeks, based on research looking at bacteria build-up in the lines. The research looked at the growth of both aerobic bacteria (leading to sour and vinegar off-flavors) and anaerobic bacteria (leading to butter and caramel off-flavors). This bi-weekly cleaning is to be done with an Alkaline cleaner, and then every 3 months an acid cleaner should be used. The alkaline cleaner deals with organic compounds (bacteria) and the acid cleaner deals with inorganic compounds (beer stone). They point out that the cleaning frequency is not dependent on how much beer is flowed through the lines- busy taps or slow ones alike.

Continue reading

FERRODAY Dual Gauge CO2 Draft Beer Regulator

  1. FERRODAY Dual Gauge CO2 Draft Beer Regulator Dual Stage Pressure Regulator CGA-320 CO2 Tank Beer Kegerator Regulator with Relief Valve Beer Keg Pressure Regulator for Homebrew 0-60 PSI 0-3000PSI

FERRODAY Dual Gauge CO2 Draft Beer Regulator Dual Stage Pressure Regulator CGA-320 CO2 Tank Beer Kegerator Regulator with Relief Valve Beer Keg Pressure Regulator for Homebrew 0-60 PSI 0-3000PSI

More Info
Highlighted Features
  • Safety & No Leaks: FERRODAY CO2 keg pressure regulator features a heavy-duty forged brass body, well made connections, and exquisitely crafted pressure release valve to prevent any kind of gas leakage
  • Easy to Adjust by Hand: CO2 regulator has 2 control knobs, big adjustment knob enables more precise control even small adjustments, small shut-off knob allows instantly shut off without liquid backing up the gas line, easy to turn
  • Lock Ring to Hold PSI & Big Gauge Clear View: A lock ring under the big knob, so the knob can be firmly locked to hold your pressure setting. Two Big gauges always accurately show you the CO2 volume in the cylinder and the output pressure to keg. FERRODAY keg regulator has a clear view of pressure for a better homebrew experience
  • Pressure Release Valve & Filter: Safety first! A customized pressure release valve automatically releases pressures at about 50 psi for safety concerns. Also can be manually pulled out for pressure adjustment. A sintered metal filter in the stem keeps dirt out of the regulator
  • After-Sales Service: We are committed to offering you high-quality products as well as superior service! Please feel free to tell if any problem, we would try our best to satisfy you. Provide technical support

 

FERRODAY Dual Gauge CO2 Regulator Beer Kegerator CO2 Regulator Beer Keg Dual-stage Kegerator Regulator CGA-320 Beer Regulator Co2 Kegerator Part Beer Keg Regulator Co2 Beer Gas Regulator Beer Tap Tool – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources
standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Using a CO2 Detector in Your Kegerator

INKBIRD WiFi Indoor Air Quality Monitor, CO2 Detector, Accurate NDIR Sensor, Temperature and Relative Humidity, Indoor CO2 Meter with Data Logger, for Cars, Wine Cellars, Grow Tents, Homes (INK-CO2W).Pictured: INKBIRD WiFi Indoor Air Quality Monitor, CO2 Detecto

Losing a tank of CO2 because of leak is frustrating. It’s a waste of time and money. Adding a CO2 monitor can help warn you of leaks minimizing loss, wasted money, wasted time and frustration.

A CO2 Monitor Alarm in Your Kegerator

Placing a CO2 Monitor with alarm inside of your kegerator can serve as another line of defense to protect against co2 leaks and loss. CO2 should not be building up in your kegerator. A CO2 monitor with alarm can alert you of this condition.

Options with WiFi and a companion app are nice because you can get notifications on your compatible phone.

These are affiliate links. Note that multiple variations of these products may be available, as such a different version may appear at these links

Beyond CO2 Levels…

Some models display additional information that can be helpful information about your kegerator. These vary model to model and can sometime include temperature and humidity.

  • Temperature – monitor your kegerator temperature
  • Humidity – Help judge whether your Eva Dry (or similar) needs recharged for the purpose of handling excess kegerator and fermentation chamber wetness.  See: Damp Kegerator? Fix Kegerator Condensation

Not A Replacement for Checking for Leaks…

A do not consider a CO2 alarm as replacement for thoroughly checking for and addressing leaks. Rather this is another layer that could save you a trip to swap out a CO2 tank.

The Biggest Trouble Spot

Color coded post o-rings. From our Keg Rebuild Post – Jump To: Replace O-Rings

In my opinion the most difficult spot to check and the cause of many a lost CO2 tanks are… gas post o-rings.

Testing at this point using the “spray bottle method” (spray Star San everywhere and check for bubbles) is impossible or at the very least difficult and messy.  Leaks will only surface here when a gas QD is actually engaged.  The problem is, you can’t easily see that spot when a QD is on.

The problem stated more simply… You need a QD on to see if it’s leaking, but you can’t see it if a QD is on. You can use what I call the pressure gauge method to check for overall leaks. But even using that method you know that you have a leak but it gives no indication where it’s at.

Be quick to replace gas side o-rings… I’m quick to replace gas post (and gas dip tube) o-rings. Beyond slow and no-carbing beers, a bad gas side o-ring can lead to empty tanks. That’s a waste of time and money and it’s frustrating.

These o-rings cost pennies each when you buy them in bulk. Liberally replacing these can save time, money and frustration.

Continue reading

Announcing: Kegland Grand Deluxe Commercial Kegerators

Kegland Grand Deluxe Kegerator

Kegland Grand Deluxe Kegerator

More Info

From the product description, check product page for current description, price and availability:

Are you looking for something more than the Series X line of Kegerators? Our Stainless Grand Deluxe 3 models are commercial grade, and perfect for commercial use or your ultimate man cave. This 60″ long model can hold 3 full sized 15.5 gallon kegs, and up to twelve 5 gallon Corny style kegs. It features a built in stainless drip tray with drain, and hole for one optional 4 faucet T tower.

• Liftgate truck delivery cost included to the lower 48 states!

• 304 stainless steel countertops with thick insulating core foam

• Complete stainless finish on sides and back

• Two double glazed safety glass doors with locks and keys included

• Exterior LED light switch to show off your products

• Built in countersunk stainless drip tray system with drain installed to bottom of unit

• 2 rubberised steel wire racks that are removeable and adjustable

• 4 heavy duty caster wheels (not fitted, adjustable feet are installed on arrival)

• Rated to operate in ambient temperatures up to 86° F.

• Digital Centigrade thermostat with adjustable differential

• Two holes filled with foam on the right side can be drilled out for gas in hoses

• Integral tower cooling fan with cooling hose to route up into your beer tower

• One year warranty

Dimensions:

External: 59″ (L) x 28″ (W) x 36″ (H) [without included 4″ caster wheels]

Internal: 45.5″ (L) x 21.5″ (D) x 30.5″ (H)

Power Consumption: 2.8 amps at 110 volts

Please Read:

1. You may want to adjust the differential of the included Dixell XR03CX controller. The differential is the amount of time the control waits after cooling to the target temperature before restarting the compressor. A higher differential gives you a wider temperature range and less wear on the compressor, while a lower differential makes for a very narrow temperature with more wear on the compressor. This is done by programming the temperature control on the front panel. This commercial grade centigrade control is very versatile and will let you fine tune your refrigerator to your specifications, but not very intuitive. Click here for a manual. Note that the unit has a fahrenheit mode, but we recommend it is not used, and that you keep the unit in centigrade for best performance.

2. This is a commercial grade appliance with a high level of cooling performance. The powerful fans in this unit are louder than the smaller Series X Kegerators

3. These commercial grade fridges have been handcrafted and may have some light cosmetic scratches or dings/dents which is normal

4. This unit is free standing and should not be built in to a countertop to prevent overheating.

5. This unit does not have a plug for the beer tower. You will need to purchase a beer tower to plug the top tower hole. All our Nukatap towers will fit.


 

Kegland Grand Deluxe Kegerator at William’s Brewing

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability

Digital Finger Counters to Estimate Remaining Draft Beer

Finger counters are pretty self explanatory.  They are digital counters that strap to your finger.  Tap the button to add one to the count.

Thanks to HBF Reader Jeff for this tip!  [8 Ways to Connect with HBF]

These are small enough to put near or on the tap, color coded for easy identification, re-settable, and will save the last recorded number when it goes into power save.

These may even fit on your tap handle or faucet, depending on it’s size.  5 gallons of beer = around 40 x 16 ounce glasses of beer.  Tweak for your quantity of beer and normal glass size and click every time you serve a pint and you’ll have an estimate of how many beers you have left.

Jeff Says: “As you can see from the picture, they fit well on standard tap handles. The band is made of that sorta “sticky” plastic kiddie watchband type material, so they stay in place and have a bit of stretch. They go to sleep to save the battery life, so you need to press once to wake up, then again to increment. So I press to guesstimate, pour and press again to record the pour. Again, it is just a rough estimate, but pretty effective.”

These are the finger counters pictured above. As of this update they’re sold out

BLUE HANDCART 12-Pack Case Resettable 5 Digit LCD Electronic Digital Display Finger Hand Tally Counter Counting – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Offerings regularly come and gosearch Amazon for “Digital Finger Counter” to shop around

Related: Make an E-Paper Tap Handle!

waveshare 2.7inch Passive NFC-Powered E-Paper Module No Battery Wireless Powering & Data Transfer Provides Android APP Black and White Display

Color Code Your Keg Post O-Rings


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

adamztop5

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions. tag:lnksfxd rpu:beerestimate

Digital CO2 Monitor – Detect Kegerator Leaks! – CO2 Levels, Humidity & Temp

CO2 Monitor | Detector with Air Quality 4-in1 | Carbon Dioxide Detector | Humidity Meter Sensor with Indoor Thermometer | Digital Higrometer for Indoor Humidity and Temperature | Version 2024

CO2 Monitor | Detector with Air Quality 4-in1 | Carbon Dioxide Detector | Humidity Meter Sensor with Indoor Thermometer | Digital Higrometer for Indoor Humidity and Temperature | Version 2024

More Info


Highlighted Features
  • 🔋 UNLEASH UNINTERRUPTED MONITORING - With our CO2 detector superior battery life, forget about constant charging. Embrace the freedom of long-lasting air quality meter tracking!
  • 🎯 ACCURACY REDEFINED - Our air quality sensor isn't just a gadget, it's your personal health guard. Experience precision like never before and trust in the numbers!
  • 🚨 ALARM THAT CARES - Our CO2 detector doesn't just beep, it alerts you to protect your health. Set your own safety thresholds and let it do the rest. ADD TO CARD!
  • 💪 BUILT TO IMPRESS - Our air quality monitor indoor is a masterpiece of durability. Crafted with top-notch materials, it's the reliable sentinel your home deserves.
  • 💰 PREMIUM QUALITY, POCKET-FRIENDLY PRICE - Why compromise when you can have it all? Our CO2 monitor delivers exceptional performance without burning a hole in your pocket.
  • 🌍 YOUR TRAVEL-SIZED HEALTH COMPANION - Home or away, our portable carbon dioxide detector for travel ensures you're always in the know about your air quality.
  • 👌 SIMPLICITY MEETS EFFICIENCY - No fuss, no hassle. Our home air quality monitor is as user-friendly as it gets. Making air quality testing a walk in the park!
  • 🏠🏢 ONE MONITOR, EVERY ENVIRONMENT - Homes, workshops, offices - our air quality tester adapts effortlessly. It's the versatile choice for all your air monitoring needs.
  • 😌 PEACE OF MIND, DELIVERED - With our CO2 detector, breathe easy and live healthily. It's not just a device, it's your ticket to a worry-free lifestyle
  • 🌟 THE ULTIMATE AIR MONITOR - More than just a CO2 monitor, it's a commitment to your health. Make the smart choice today. Your health is worth it!


From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

This measures three things that make it perfect for keeping a close eye on your kegerator,,,

  • CO2 levels – help spot CO2 leaks in your kegerator. See below
  • Temperature – monitor your kegerator temperature
  • Humidity – Help judge whether your Eva Dry (or similar) needs recharged for the purpose of handling excess kegerator and fermentation chamber wetness.  See: Damp Kegerator? Fix Kegerator Condensation

TACKLY – CO2 Monitor | Detector with Air Quality 4-in1 | Carbon Dioxide Detector | Humidity Meter Sensor with Indoor Thermometer | Digital Higrometer for Indoor Humidity and Temperature | Version 2024 – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Using a layer of defense to detect against kegerator CO2 leaks…

Placing a CO2 Monitor with alarm inside of your kegerator can serve as another line of defense to protect against co2 leaks and loss. CO2 should not be building up in your kegerator. A CO2 monitor with alarm can alert you of this condition.

This is not a replacement for checking for CO2 leaks using traditional methods, rather a another layer that could save you a trip to swap out a CO2 tank.

Related: Step by Step: Finding and Fixing Keg CO2 Leaks

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

RaspberryPints Digital Tap List – Step by Step Tutorial

RaspberryPints Digital Tap List

Raspberry Pi mini computers can be for lots and lots of things including putting together a temperature controller or for brew system automation and control.  You can also use these computers in conjunction with Raspberry Pints to display a digital tap list with or without flow meters to track pints served and beer remaining.

Search Raspberry Pi on Amazon

Here is a step by step to setup RaspberryPints Digital Tap List by Derek Berner.  Check it out – “nts” : Pints Without the Pi

Related: Make an E-Paper Tap Handle!

waveshare 2.7inch Passive NFC-Powered E-Paper Module No Battery Wireless Powering & Data Transfer Provides Android APP Black and White Display

Color Code Your Keg Post O-Rings

More Homebrew Finds!

Recent Deals!

10 Most Recent Homebrew Resource Posts & How-To’s!

We are Homebrew Review HQ!  Our 10 Most Recent Reviews


pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:lnksfxd rpu:raspberrypints

Higher Wattage Gear? 16A, 1,920 Watt Pymeter Digital Two Stage Digital Temp Controller

Pymeter Digital Temperature Controller Dual Probe Reptile Thermostat Controlled Outlet for Terrarium Heat Mat Heating Pad, Switch Cooling Fan Freezer Fridge ON & Off at Setpoints 10A 1200W

Pymeter Digital Temperature Controller

More Info


Highlighted Features
  • Excellent Value for Money:Dual Probes, Dual Outlets, Dual Zones Control, it's a Dual Controllers in ONE Unit. More than DOUBLE the functionality of other thermostats!
  • Incredibly Easy Setup:Just need to set outlet 1 turn ON at A temp point, turn OFF at B temp point, and set outlet 2 turn ON at C temp point, turn OFF at D temp point, then outlet 1 will control temp in the range of A~B, and outlet 2 will control temp in the range of C~D
  • Flexible Heating/Cooling:Heating+Coloing, Heating+Heating, Cooling+Heating, Cooling+Cooling, any combination as you want
  • Fairly Accurate:Accurate to 0.1°F both in setting and reading, Control Accuracy can be set within 1°F, e.g. control temp in the range of 85.5°F~85.9°F
  • Safe and Reliable:Support High and Low Temperature Alarm; Temperature Difference Alarm, which is very helpful to keep target safe from malfunction of any one sensor. Cooking fishes NEVER happen!

 

Dual stage temperature controller with 1,920 watt rating. I would say that 1,920 watt is a higher capacity than many of the homebrew controllers out there. The other higher capacity controller that I’m aware of is Inkbird’s ITC-608T. That has an 1,800 watt rating.

Pymeter 2 in 1 Digital Temperature Controller Dual Outlet Heat Mat Thermostat Reptile Greenhouse Heater Home Brewing Freezer Cooling Heating Pad Control 16A 1920W – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Pymeter Digital Two Stage Digital Temp Controller

Pymeter Digital Temperature Controller Dual Probe Reptile Thermostat Controlled Outlet for Terrarium Heat Mat Heating Pad, Switch Cooling Fan Freezer Fridge ON & Off at Setpoints 10A 1200W

Pymeter Digital Temperature Controller

More Info


Highlighted Features
  • Think different, think simple:You are able to set every outlet(attached to heater/fan) to turn on at a certain temp, and turn off at another temp
  • 2 controllers in one unit:Two outlets are individually separate, each supports heating & cooling. With two waterproof sensors, you can set different temps to control different areas, such as with 2 heat lamps/mats for dual zones or even for 2 tanks
  • Safe and reliable:High and low temperature alarm, and temperature difference alarm, keep your target secure
  • Convert freezer to refrigerator:With Power-On delay, it can protect compressor from frequent ON-OFF
  • Widely used:It is used as temperature switches / thermostatically controlled outlet for heat mat / heat lamp / heating pad of reptile terrarium / tank, aquarium heater / chiller, greenhouse and grow tent heater, garage / attic exhaust fan, breeding, seedling and fermentation

 

Pymeter Digital Temperature Controller Dual Probe Reptile Thermostat Controlled Outlet for Terrarium Heat Mat Heating Pad, Switch Cooling Fan Freezer Fridge ON & Off at Setpoints 10A 1200W – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

VEVOR CO2 Double Gauge Regulator

VEVOR CO2 Double Gauge Regulator, Small, Silver

VEVOR CO2 Double Gauge Regulator, Small, Silver

More Info


Highlighted Features
  • Adjustable Range: The pressure range of the gas meter is adjustable from 0 to 60 PSI, allowing you to freely adjust the intake pressure of carbon dioxide gas, thus controlling the foaming texture of beer and ensuring that the beer-making process and results meet your needs and expectations.
  • Pressure Stability: The pressure relief valve autonomously adjusts the pressure to release at 65 PSI, preventing pressure relief under low pressure. This detail design ensures the quality and quantity of the brewed beer, without being affected by pressure issues.
  • Leak-proof: The gas meter comes with gaskets and clamps, both of which help you secure the gas meter to the beer keg and prevent gas leakage. This design guarantees the stability and reliability of the gas meter.
  • Versatile Compatibility: The carbon dioxide gas meter interface standard is CGA320, compatible with hose calibers of 8mm, making it compatible with various beer kegs. The installation is simple and quick, making your beer-making process more convenient.
  • Backflow Prevention: The gas meter is equipped with a check valve to prevent beer from flowing back due to pressure issues. This design ensures a smoother and more stable beer-making process while also maintaining the cleanliness of the beer keg.

 

VEVOR CO2 Double Gauge Regulator – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Govee WiFi Thermometer + Four Probes – iOS & Android

Govee WiFi Meat Thermometer, Wireless Meat Thermometer with 4 Probe, Smart Bluetooth Grill Thermometer with Remote App Notification Alert, Digital Rechargeable BBQ Thermometer for Smoker Oven Kitchen

Govee WiFi Thermometer

More Info


Highlighted Features
  • Anywhere Remotely Monitor Temperature: Our smart meat thermometer sends instant notifications to the Govee Home App and your digital thermometer when any temperature goes outside your presets.(Note: not support 5G.)
  • 28 USDA-Meat Preset Temperature: Govee wireless WiFi meat thermometer will provide suggestions based on user needs for foods such as beef, lamb, chicken, pork, turkey, and more, Grill more efficiently, whether you're a beginner or a professional.
  • Accurate and Versatile: Our food-grade probes have a measuring range of 32°- 572°F with ±1.8°F/1°C accuracy, and you can monitor multiple food temperatures at once. Perfect for smoking, grilling, BBQ, and oven cooking.
  • Long Lasting Battery: With a 3000mAh rechargeable battery, our meat thermometer lasts up to 40 hours on a full charge. Plus, it's eco-friendly and convenient.
  • Important Note: Please avoid exposing the probe to open flames or water immersion for accurate measurements. If you encounter any issues, please contact us for assistance.

 

Govee WiFi Meat Thermometer, Wireless Meat Thermometer with 4 Probe, Smart Bluetooth Grill Thermometer with Remote App Notification Alert, Digital Rechargeable BBQ Thermometer for Smoker Oven Kitchen – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Wellbom Two Pressure CO2 Regulator – multiple carbonation levels and more

WELLBOM Dual Output CO2 Regulator, 0-3000 Psi Tank Pressure CGA320 Keg Regulator, 0-60 Psi Working Pressure Kegerator Regulator Carbonated Beer Regulator

WELLBOM Dual Output CO2 Regulator, 0-3000 Psi Tank Pressure CGA320 Keg Regulator, 0-60 Psi Working Pressure Kegerator Regulator Carbonated Beer Regulator

More Info


Highlighted Features
  • Precise & Clear Gauges: Our dual CO2 pressure regulators are built to last. You can trust in its precision and durability. The left gauge (0-3000psi) can monitor the amount of CO2 in the tank at any time, and the top two gauges are output pressure(0-60psi). The keg pressure can be accurately fine-tuned while avoiding damage to the pressure gauge due to excessive pressure
  • No Leakage: The keg regulator CO2 comes with CGA320 sealing washers, ensuring a secure and leak-free connection. Always place a washer between the lock-down nut and the CO2 tank for a tight seal
  • Professional Dual Regulator CO2: The Dual Keg Regulator has 2 separate adjustment knobs and an output pressure gauge to set the required pressure value for each gas line. WELLBOM keg regulator fits all CGA-320 inlet CO2 cylinders. They have welded O.D.5/16" barbs suit ID 5/16" CO2 beer gas lines
  • Solid Constructions: Heavy-duty chrome-plated brass body with no rust. The shockproof case can protect the gauges, making the gauges more durable
  • After Sales: WELLBOM has a professional production and high-quality products and provides excellent after-sales service, If you have any questions about our CO2 regulator dual, we will do our best to help you solve the problem

 

Why a two pressure regulator?  A two pressure regulator gives you the ability to keep kegs at different pressures.  This is a requirement to maintain two distinct carbonation levels.  It’s also handy if you want to force carbonate a keg more quickly, at a higher pressure, while maintaining your standard serving pressure on a keg that’s already being served or if you want to have a utility line for purging kegs and such.

WELLBOM Dual Output CO2 Regulator, 0-3000 Psi Tank Pressure CGA320 Keg Regulator, 0-60 Psi Working Pressure Kegerator Regulator Carbonated Beer Regulator – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Three Top Tips for Keezer Conversions

keezer conversion tips

Updated: 6/26/2024

Chest freezers are great. They’re generally well priced and they’re space and energy efficient and can be easily had.

The primary idea with a chest freezer is to… freeze food. Also referred to as Deep Freezes, most models do not go through a defrost cycle. That’s a bummer come manual defrost time but outstanding for energy savings and food preservation.


Side note… Because of the lack of a defrost cycle, chest freezers are great for storing hops – our hop deals roundup


Many people including myself have repurposed chest freezers as kegerators or “keezers”.

What does Keezer mean?  Keezer = kegerator + freezer.

To do the conversion you basically add a compatible temp controller – Inkbird deals and reviews – that will allow you to operate a chest freezer at fridge temps.  After that add some taps, maybe a collar, some kegs and a CO2 tank and you’re off and going!

The problem: Chest freezers are generally meant to operate at freezing temperatures, not beer serving temps. This causes issues with condensation and airflow. Left unhandled these issues can cause other problems, like sanitation issues.

Through several iterations of my own keezer, I’ve experienced all of these problems. I have a library of tips and resources that specifically apply to serving draft beer, but these are the top three when it comes to keezer conversions.

Continue reading

KOMOS Stainless Triple Tap Draft Tower – Includes THREE Intertap Faucets – on sale for $179.99

KOMOS® Stainless Triple Tap Draft Tower | Intertap® Faucets | Duotight Shank Adapters

KOMOS® Stainless Triple Tap Draft Tower | Intertap® Faucets | Duotight Shank Adapters

More Info

From the product description, check product page for current description, price and availability:

Single tap tower with reflective chrome finish. The tower is made from ABS plastic. Includes polished chrome Intertap forward-sealing faucet, faucet handle, and tower shank with 6mm (0.24″) barbed tailpiece. Mounting screws included.


Intertap Stainless Steel, Forward Sealing Faucet from MoreBeer.  Unique modular threaded spout design can fit a variety of attachments.

Intertaps are awesome!  Check out my Hands on Review of these great faucets.

  • This combo is on sale for $179.99.
  • Get Free Shipping: Shipping is free with a qualifying $59 order to many US addresses
  • Some filler item ideas to help you qualify for free shipping… PBW, Sale Items (shows most popular deals first), Hop Market (shows most popular deals first)

KOMOS® Stainless Triple Tap Draft Tower | Intertap® Faucets | Duotight Shank Adapters KG402C

Also: Intertap Forward Sealing Stainless Steel Beer Faucet D1210Complete Lineup of Intertap Faucets and Accessories

duotightreview

intertap faucet review



Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

Continue reading

VEVOR Gallon Mini Keg w/Regulator and Faucet

VEVOR Beer Growler Tap System Double-Layer 304 Stainless Steel, Pressure Display, CO2 Regulator Faucet, Leak-Proof Ring for Draft, Homebrew, 128Oz 4L, Black

VEVOR Beer Growler Tap System Double-Layer 304 Stainless Steel, Pressure Display, CO2 Regulator Faucet, Leak-Proof Ring for Draft, Homebrew, 128Oz 4L, Black

More Info

Highlighted Features
  • Portable Size: A 128oz carbonated beer mini keg, with dimensions of 8.3 x 8.3 x 15.7 inches, comes with a built-in portable handle. It is suitable for home gatherings or outdoor camping.
  • Vacuum Sealing: The mini dispenser system maintains a vacuum pressure inside the keg, keeping the beer fresh for 1-3 months. Remember to purge the air inside before use.
  • Refrigeration and Insulation: The mini keg can be stored in the refrigerator. With its double-layer stainless steel sealing material, it can keep the beer cold for up to 4 hours at an ambient temperature of 80.6℉ and provide long-term insulation.
  • Pressure Adjustment: You can fine-tune the pressure by rotating the adjustment knob according to your beer type, ensuring a perfect carbonation. You can use 16g 3/8-24UNF to inject CO2 into the keg.
  • Exquisite Appearance: Each mini keg has an exquisite exterior design, bringing a small surprise to every person who appreciates a tasteful life, whether it is for personal use or as a gift for friends and family.

 

VEVOR Beer Growler Tap System Double-Layer 304 Stainless Steel, Pressure Display, CO2 Regulator Faucet, Leak-Proof Ring for Draft, Homebrew, 128Oz 4L, Black – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

adamztop5

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:watch1

SPARC Premium CO2 Pressure Regulator

SPARC Premium CO2 Pressure Regulator

SPARC Premium CO2 Pressure Regulator

More Info


Highlighted Features
  • PROFESSIONAL GRADE PRECISION: Dive into unparalleled performance with our heavy-duty CO2 Pressure Regulator. Equipped with 2 rubber-clad and factory calibrated 2-3/8" oversized gauges (most units on the market are 2"), it ensures easy-to-read accuracy for soda machines, bars, kegs, brew setups, kombucha, and more. With a 0-3000PSI input pressure capability (gauge reads 0-3500PSI) and 0-60PSI output pressure (gauges reads 0-80PSI), you can trust in its precision and durability.
  • FLEXIBLE CONNECTIONS: Our regulator effortlessly fits all standard CO2 tanks with CGA-320 outlets. On the output side, we include 1 of each type of fitting: 1/4" hose barb (works fine with most any 5/16 tubing as well), 3/8" hose barb, and 3/8" push-to-connect.
  • EFFORTLESS SETUP: Installation is a breeze! We've got you covered with an included bottle nut wrench and 3 extra sealing washers for a guaranteed secure and leak-free connection. Always place a washer between the lock-down nut and the tank for a tight seal. The wrench can stay on the regulator when installed, so there is no more hunting for tools to swap bottles.
  • SAFETY FIRST, ALWAYS: We value your safety. With an adjustable working pressure knob and gas shut-off valve, you can swap kegs or tanks without a second thought. And our integrated safety pressure relief valve (PRV) ensures everything operates smoothly and securely.
  • COMMITMENT TO EXCELLENCE: We're based in Denver, CO, and back our product with a rock-solid 2 year USA warranty against manufacturing defects (warranty is provided by SPARC). Count on our responsive customer service via phone, text, or email.

 

SPARC Premium CO2 Pressure Regulator for Beer, Kombucha, Soda Machines CGA320 2YR USA Warranty – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

12 x Bev Rite Faucet Hygiene Plugs

faucet hygiene plug

Bev Rite Faucet Hygiene Plug Brush

More Info


Highlighted Features
  • SS core to prevent rusting
  • Wider Brush to fit securely
  • Cleans the faucet spout each time brush is inserted and removed
  • Keeps faucet spout covered when not in use
  • Stepped design to fit most Beer Faucets

 

Bev Rite X12 Faucet Hygiene Plug Brush (12 Pack), Small, Blue – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft


intertap faucet review



This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Flash Sale, Today Only: ThermoWorks Fridge & Freezer Thermometer (Monitor Kegerator & Fermentation) – Save 40%!

thermoworks rt8100

The RT8100 Fridge/Freezer Thermometer from ThermoWorks makers of the nearly universally lauded Thermapen.  This thermometer displays two temperatures via and LED display.  It has programmable out-of-limits alarms and a magnetic back.  Also has the ability to show min and max temps.

You could use this to monitor your kegerator, fermentation chamber or If your fermentation chamber and kegerator are close, you could monitor both with this unit.  The min/max function is handy for getting a general idea of how well your kegerator or fermentation chamber is performing.

This is marked down a whopping 40% as part of a short flash sale, available today 3/22 only.

Min/Max Recording Thermometer w/ Alarms RT8100

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Price, promotions and availability can change quickly. Check the product page for current price, description and availability prod:twrt8100

FIX DuoTight Fitting and EVABarrier Tubing Leaks

Leaks? Troubleshooting EVABarrier/DuoTight Leaks

I’ve done several pressure tests with DuoTight Fittings and EVABarrier Tubing. Each test has proven the tested components were leak free. Having said that, it’s entirely possible that you’ll have a leak. This happens with any tubing system, that’s why we… check for leaks. Some tips…

  • Check for leaks as you would if you were using standard tubing. DuoTights and EVABarrier are amazing… but not magic. They need to be installed correctly and securely throughout your system. Liquid liquids are easy to spot. Gas leaks are a little more difficult.
  • I highly suggest picking up a DuoTight Pressure Gauge. You can easily add this to your setup and use this technique for checking for gas leaks.
  • If you have a section of EVABarrier tubing that’s marred or damaged, cut off a couple inches to get a fresh end.
  • Make sure you’re pushing the EVABarrier Tubing completely in to your DuoTight Fitting.
  • Make sure you’re pulling your EVABarrier Tubing out firmly to engage the sealing mechanism.
  • DuoTight Compatible Locking ClipsI recommend using these on all DuoTight connections. They snap into place pushing the collar out, securely engaging the fitting. They also help prevent bumps and moves from disengaging the connection.
  • If you have a particular fitting that won’t seal… contact the seller or manufacturer to get a replacement. A leaking DuoTight fitting is not normal and I’m guessing your retailer will take care of you. Out of the dozens of fittings I have I’ve had 1 that was non-functional on receipt.

DuoTight Compatible Locking Clips

DuoTight Compatible Locking Clips

Valuebrew’s DuoTight Compatible Locking Clips are a great addition to any DuoTight setup.  These snap into the collar of DuoTight Fittings and lock connections in place. This makes the connection more secure and reduces the chances of leakage.

These are available in both 8mm and 9.5mm sizes

 

Sanitizing DuoTight Fittings – Star San & DuoTights?

I’ve gotten some feedback when it comes to DuoTights and Star San.  The materials used in DuoTight fittings – Acetal, EPDM, Stainless – are generally compatible with Star San. However that doesn’t mean that you can soak DuoTights in Star San endlessly.

Star Stan could eventually damage DuoTights (and lots of other things) given excessive exposure. Damaged fittings = potential leaks. Contact time for Star San is five minutes. That’s about how long you should leave a part sitting in Star San.

Related: Star San Tips & Tricks

Our Step by Step on Finding and Fixing Kegerator CO2 Leaks

fix keg co2 leaks Continue reading

Three Top Tips for Keezer Conversions!

keezer conversion tips

Updated: 6/26/2024

Chest freezers are great. They’re generally well priced and they’re space and energy efficient and can be easily had.

The primary idea with a chest freezer is to… freeze food. Also referred to as Deep Freezes, most models do not go through a defrost cycle. That’s a bummer come manual defrost time but outstanding for energy savings and food preservation.


Side note… Because of the lack of a defrost cycle, chest freezers are great for storing hops – our hop deals roundup


Many people including myself have repurposed chest freezers as kegerators or “keezers”.

What does Keezer mean?  Keezer = kegerator + freezer.

To do the conversion you basically add a compatible temp controller – Inkbird deals and reviews – that will allow you to operate a chest freezer at fridge temps.  After that add some taps, maybe a collar, some kegs and a CO2 tank and you’re off and going!

The problem: Chest freezers are generally meant to operate at freezing temperatures, not beer serving temps. This causes issues with condensation and airflow. Left unhandled these issues can cause other problems, like sanitation issues.

Through several iterations of my own keezer, I’ve experienced all of these problems. I have a library of tips and resources that specifically apply to serving draft beer, but these are the top three when it comes to keezer conversions.

Continue reading