From the product description, check product page for current description, price and availability:

These are reconditioned 5-gallon capacity, ball lock corny kegs with rubber tops and bottoms (color may vary).

The interior and exterior of these corny kegs are washed and rinsed and all gaskets are replaced to ensure that no soda flavor or residue is left behind. We are one of the only suppliers to do this. We do not replace relief valves or poppets, however these can be purchased separately via part numbers KEG540 and KEG450.

Corny kegs are pressure tested and are guaranteed to be holding pressure upon delivery. If they are not holding pressure, please notify us as soon as possible.

All kegs are used and have cosmetic blemishes, i.e. minor scratches, dings and stickers. These blemishes will not affect the functionality of the corny kegs.

Body connects should be removed for cleaning and sanitizing before every use. Soda kegs may come with either 11/16 inch body connects or 7/8 inch body connects. We sell deep sockets for the removal of either one (Part numbers KEG991 and KEG992. We suggest purchasing both if you do not have these at home.

Ball lock corny kegs are approximately 8.5″ Diam. x 25″ Height. 26 1/4″ Height with Flare fittings. Measurements may vary slightly.

• Commentary: Pin Lock Keg Pricing and Availability
• Check Your CO2 Regulator for Leaks!
• How to get a keg ready for first use? New Keg Cleaning and Prep
• Portable Draft Beer Serving Options!
• Pin Lock Keg Pricing and Availability
• The Most Difficult Spot to Check for CO2 Leaks
• Keg O-Ring Materials Selection! – EPDM, Silicone and Buna-N?
• Why Do I Have Bubbles in My Beer Line? Diagnosing and Fixing Kegerator Foam Problems
• Five Benefits of Using Corny Kegs As Fermenters
• Rebuilding & Reconditioning Homebrew Kegs!
• Food Safe Replacement Keg O-Rings in Bulk
• Hands on Review: Kegland DuoTight Fittings & EVABarrier Tubing!
• Why Won’t My Beer Carbonate? Fixing Draft Beer Carbonation Problems
• What Does a Flow Control Faucet Do?
• Upgrade Your Kegerator – 6 Improvements!
• Serve Homebrew on Any Kegerator & Convert Commercial Kegerator to Homebrew
• Tips and Gear for Growler Filling
• What’s the Difference Between Ball Lock Kegs and Pin Lock Kegs?
• Checking for Draft System CO2 Leaks – Using The Pressure Gauge Method
• Tip: Consider Oetiker Stepless Clamps for Kegerator Gas and Beer Lines
• Hands On Review: Inkbird ITC-308 Dual Stage Temperature Controller +WiFi Version
• Universal Poppets Tips and Tricks!
• Convert Your Mark II Keg & Carboy Washer to a Recirculating Draft Line Cleaning Pump!
• Step by Step: Finding and Fixing Keg CO2 Leaks
• Kegerator Temperature Probe Placement – To Immerse or Not To Immerse? – three tests to determine optimal pla…
• Kegerator Beer Line Temperatures & Reducing Foam with a Recirculating Fan
• Kegging CO2 Use Estimations and Calculations
• Balancing Your Kegerator Draft System
• Building a Simple Ball Lock Draft Line Flushing Setup
• Build a Recirculating Draft Line Cleaning Pump
• Home Brew Keg Roundup – New & Used, 5 and 2.5 Gallon & More!
• Damp Kegerator? Fix Kegerator Condensation
• Homebrew Temp Controller Roundup! – Kegerator and Fermentation – concepts, applications and models
• Bulk Keg Orings and Keg Parts Reference

From the product description, check product page for current description, price and availability:

A great price on an non-rebuilt Cornelius keg. You can purchase the rebuild kit and replace the gaskets yourself (very easy job) to save some money. These Cornelius kegs could have residual soda syrup inside and will need to be cleaned. To totally rebuild the keg you should also consider a new relief valve and poppets (part number listed below). PBW works as a great cleaner for eating away sticky residual soda residue. Kegs are sold “as is”.

The body connnects on a keg are the metal posts where the quick disconnects attach too. They should be removed for cleaning and sanitizing before each use. Kegs can come with either 11/16″ body connects or 7/8″ body connects. We sell deep sockets for the removal of either one. So if you do not have these sockets at home and want to make sure you can disassemble these Cornelius kegs you may want to purchase both sockets below. Then you will always be covered as your keg collection grows.

If you want a great deal on a 4 pack of kegs, check out our KEG430A.

• Commentary: Pin Lock Keg Pricing and Availability
• Check Your CO2 Regulator for Leaks!
• How to get a keg ready for first use? New Keg Cleaning and Prep
• Portable Draft Beer Serving Options!
• Pin Lock Keg Pricing and Availability
• The Most Difficult Spot to Check for CO2 Leaks
• Keg O-Ring Materials Selection! – EPDM, Silicone and Buna-N?
• Why Do I Have Bubbles in My Beer Line? Diagnosing and Fixing Kegerator Foam Problems
• Five Benefits of Using Corny Kegs As Fermenters
• Rebuilding & Reconditioning Homebrew Kegs!
• Food Safe Replacement Keg O-Rings in Bulk
• Hands on Review: Kegland DuoTight Fittings & EVABarrier Tubing!
• Why Won’t My Beer Carbonate? Fixing Draft Beer Carbonation Problems
• What Does a Flow Control Faucet Do?
• Upgrade Your Kegerator – 6 Improvements!
• Serve Homebrew on Any Kegerator & Convert Commercial Kegerator to Homebrew
• Tips and Gear for Growler Filling
• What’s the Difference Between Ball Lock Kegs and Pin Lock Kegs?
• Checking for Draft System CO2 Leaks – Using The Pressure Gauge Method
• Tip: Consider Oetiker Stepless Clamps for Kegerator Gas and Beer Lines
• Hands On Review: Inkbird ITC-308 Dual Stage Temperature Controller +WiFi Version
• Universal Poppets Tips and Tricks!
• Convert Your Mark II Keg & Carboy Washer to a Recirculating Draft Line Cleaning Pump!
• Step by Step: Finding and Fixing Keg CO2 Leaks
• Kegerator Temperature Probe Placement – To Immerse or Not To Immerse? – three tests to determine optimal pla…
• Kegerator Beer Line Temperatures & Reducing Foam with a Recirculating Fan
• Kegging CO2 Use Estimations and Calculations
• Balancing Your Kegerator Draft System
• Building a Simple Ball Lock Draft Line Flushing Setup
• Build a Recirculating Draft Line Cleaning Pump
• Home Brew Keg Roundup – New & Used, 5 and 2.5 Gallon & More!
• Damp Kegerator? Fix Kegerator Condensation
• Homebrew Temp Controller Roundup! – Kegerator and Fermentation – concepts, applications and models
• Bulk Keg Orings and Keg Parts Reference

From the product description, check product page for current description, price and availability:

These are reconditioned 5-gallon capacity, ball lock corny kegs with rubber tops and bottoms (color may vary).

The interior and exterior of these corny kegs are washed and rinsed and all gaskets are replaced to ensure that no soda flavor or residue is left behind. We are one of the only suppliers to do this. We do not replace relief valves or poppets, however these can be purchased separately via part numbers KEG540 and KEG450.

Corny kegs are pressure tested and are guaranteed to be holding pressure upon delivery. If they are not holding pressure, please notify us as soon as possible.

All kegs are used and have cosmetic blemishes, i.e. minor scratches, dings and stickers. These blemishes will not affect the functionality of the corny kegs.

Body connects should be removed for cleaning and sanitizing before every use. Soda kegs may come with either 11/16 inch body connects or 7/8 inch body connects. We sell deep sockets for the removal of either one (Part numbers KEG991 and KEG992. We suggest purchasing both if you do not have these at home.

Ball lock corny kegs are approximately 8.5″ Diam. x 25″ Height. 26 1/4″ Height with Flare fittings. Measurements may vary slightly.

• Commentary: Pin Lock Keg Pricing and Availability
• Check Your CO2 Regulator for Leaks!
• How to get a keg ready for first use? New Keg Cleaning and Prep
• Portable Draft Beer Serving Options!
• Pin Lock Keg Pricing and Availability
• The Most Difficult Spot to Check for CO2 Leaks
• Keg O-Ring Materials Selection! – EPDM, Silicone and Buna-N?
• Why Do I Have Bubbles in My Beer Line? Diagnosing and Fixing Kegerator Foam Problems
• Five Benefits of Using Corny Kegs As Fermenters
• Rebuilding & Reconditioning Homebrew Kegs!
• Food Safe Replacement Keg O-Rings in Bulk
• Hands on Review: Kegland DuoTight Fittings & EVABarrier Tubing!
• Why Won’t My Beer Carbonate? Fixing Draft Beer Carbonation Problems
• What Does a Flow Control Faucet Do?
• Upgrade Your Kegerator – 6 Improvements!
• Serve Homebrew on Any Kegerator & Convert Commercial Kegerator to Homebrew
• Tips and Gear for Growler Filling
• What’s the Difference Between Ball Lock Kegs and Pin Lock Kegs?
• Checking for Draft System CO2 Leaks – Using The Pressure Gauge Method
• Tip: Consider Oetiker Stepless Clamps for Kegerator Gas and Beer Lines
• Hands On Review: Inkbird ITC-308 Dual Stage Temperature Controller +WiFi Version
• Universal Poppets Tips and Tricks!
• Convert Your Mark II Keg & Carboy Washer to a Recirculating Draft Line Cleaning Pump!
• Step by Step: Finding and Fixing Keg CO2 Leaks
• Kegerator Temperature Probe Placement – To Immerse or Not To Immerse? – three tests to determine optimal pla…
• Kegerator Beer Line Temperatures & Reducing Foam with a Recirculating Fan
• Kegging CO2 Use Estimations and Calculations
• Balancing Your Kegerator Draft System
• Building a Simple Ball Lock Draft Line Flushing Setup
• Build a Recirculating Draft Line Cleaning Pump
• Home Brew Keg Roundup – New & Used, 5 and 2.5 Gallon & More!
• Damp Kegerator? Fix Kegerator Condensation
• Homebrew Temp Controller Roundup! – Kegerator and Fermentation – concepts, applications and models
• Bulk Keg Orings and Keg Parts Reference

From the product description, check product page for current description, price and availability:

These are reconditioned 5-gallon capacity, ball lock corny kegs with rubber tops and bottoms (color may vary).

The interior and exterior of these corny kegs are washed and rinsed and all gaskets are replaced to ensure that no soda flavor or residue is left behind. We are one of the only suppliers to do this. We do not replace relief valves or poppets, however these can be purchased separately via part numbers KEG540 and KEG450.

Corny kegs are pressure tested and are guaranteed to be holding pressure upon delivery. If they are not holding pressure, please notify us as soon as possible.

All kegs are used and have cosmetic blemishes, i.e. minor scratches, dings and stickers. These blemishes will not affect the functionality of the corny kegs.

Body connects should be removed for cleaning and sanitizing before every use. Soda kegs may come with either 11/16 inch body connects or 7/8 inch body connects. We sell deep sockets for the removal of either one (Part numbers KEG991 and KEG992. We suggest purchasing both if you do not have these at home.

Ball lock corny kegs are approximately 8.5″ Diam. x 25″ Height. 26 1/4″ Height with Flare fittings. Measurements may vary slightly.

• Commentary: Pin Lock Keg Pricing and Availability
• Check Your CO2 Regulator for Leaks!
• How to get a keg ready for first use? New Keg Cleaning and Prep
• Portable Draft Beer Serving Options!
• Pin Lock Keg Pricing and Availability
• The Most Difficult Spot to Check for CO2 Leaks
• Keg O-Ring Materials Selection! – EPDM, Silicone and Buna-N?
• Why Do I Have Bubbles in My Beer Line? Diagnosing and Fixing Kegerator Foam Problems
• Five Benefits of Using Corny Kegs As Fermenters
• Rebuilding & Reconditioning Homebrew Kegs!
• Food Safe Replacement Keg O-Rings in Bulk
• Hands on Review: Kegland DuoTight Fittings & EVABarrier Tubing!
• Why Won’t My Beer Carbonate? Fixing Draft Beer Carbonation Problems
• What Does a Flow Control Faucet Do?
• Upgrade Your Kegerator – 6 Improvements!
• Serve Homebrew on Any Kegerator & Convert Commercial Kegerator to Homebrew
• Tips and Gear for Growler Filling
• What’s the Difference Between Ball Lock Kegs and Pin Lock Kegs?
• Checking for Draft System CO2 Leaks – Using The Pressure Gauge Method
• Tip: Consider Oetiker Stepless Clamps for Kegerator Gas and Beer Lines
• Hands On Review: Inkbird ITC-308 Dual Stage Temperature Controller +WiFi Version
• Universal Poppets Tips and Tricks!
• Convert Your Mark II Keg & Carboy Washer to a Recirculating Draft Line Cleaning Pump!
• Step by Step: Finding and Fixing Keg CO2 Leaks
• Kegerator Temperature Probe Placement – To Immerse or Not To Immerse? – three tests to determine optimal pla…
• Kegerator Beer Line Temperatures & Reducing Foam with a Recirculating Fan
• Kegging CO2 Use Estimations and Calculations
• Balancing Your Kegerator Draft System
• Building a Simple Ball Lock Draft Line Flushing Setup
• Build a Recirculating Draft Line Cleaning Pump
• Home Brew Keg Roundup – New & Used, 5 and 2.5 Gallon & More!
• Damp Kegerator? Fix Kegerator Condensation
• Homebrew Temp Controller Roundup! – Kegerator and Fermentation – concepts, applications and models
• Bulk Keg Orings and Keg Parts Reference

From the product description, check product page for current description, price and availability:

A great price on an non-rebuilt Cornelius keg. You can purchase the rebuild kit and replace the gaskets yourself (very easy job) to save some money. These Cornelius kegs could have residual soda syrup inside and will need to be cleaned. To totally rebuild the keg you should also consider a new relief valve and poppets (part number listed below). PBW works as a great cleaner for eating away sticky residual soda residue. Kegs are sold “as is”.

The body connnects on a keg are the metal posts where the quick disconnects attach too. They should be removed for cleaning and sanitizing before each use. Kegs can come with either 11/16″ body connects or 7/8″ body connects. We sell deep sockets for the removal of either one. So if you do not have these sockets at home and want to make sure you can disassemble these Cornelius kegs you may want to purchase both sockets below. Then you will always be covered as your keg collection grows.

If you want a great deal on a 4 pack of kegs, check out our KEG430A.

• Commentary: Pin Lock Keg Pricing and Availability
• Check Your CO2 Regulator for Leaks!
• How to get a keg ready for first use? New Keg Cleaning and Prep
• Portable Draft Beer Serving Options!
• Pin Lock Keg Pricing and Availability
• The Most Difficult Spot to Check for CO2 Leaks
• Keg O-Ring Materials Selection! – EPDM, Silicone and Buna-N?
• Why Do I Have Bubbles in My Beer Line? Diagnosing and Fixing Kegerator Foam Problems
• Five Benefits of Using Corny Kegs As Fermenters
• Rebuilding & Reconditioning Homebrew Kegs!
• Food Safe Replacement Keg O-Rings in Bulk
• Hands on Review: Kegland DuoTight Fittings & EVABarrier Tubing!
• Why Won’t My Beer Carbonate? Fixing Draft Beer Carbonation Problems
• What Does a Flow Control Faucet Do?
• Upgrade Your Kegerator – 6 Improvements!
• Serve Homebrew on Any Kegerator & Convert Commercial Kegerator to Homebrew
• Tips and Gear for Growler Filling
• What’s the Difference Between Ball Lock Kegs and Pin Lock Kegs?
• Checking for Draft System CO2 Leaks – Using The Pressure Gauge Method
• Tip: Consider Oetiker Stepless Clamps for Kegerator Gas and Beer Lines
• Hands On Review: Inkbird ITC-308 Dual Stage Temperature Controller +WiFi Version
• Universal Poppets Tips and Tricks!
• Convert Your Mark II Keg & Carboy Washer to a Recirculating Draft Line Cleaning Pump!
• Step by Step: Finding and Fixing Keg CO2 Leaks
• Kegerator Temperature Probe Placement – To Immerse or Not To Immerse? – three tests to determine optimal pla…
• Kegerator Beer Line Temperatures & Reducing Foam with a Recirculating Fan
• Kegging CO2 Use Estimations and Calculations
• Balancing Your Kegerator Draft System
• Building a Simple Ball Lock Draft Line Flushing Setup
• Build a Recirculating Draft Line Cleaning Pump
• Home Brew Keg Roundup – New & Used, 5 and 2.5 Gallon & More!
• Damp Kegerator? Fix Kegerator Condensation
• Homebrew Temp Controller Roundup! – Kegerator and Fermentation – concepts, applications and models
• Bulk Keg Orings and Keg Parts Reference