Category Archives: Manifolds

Pneumatic Manifold Air Distribution Blocks for CO2 Manifold Projects

2 Way Pneumatic Manifold Air Distribution Block, G1/2 Supply Port, G1/4-Inch Output Port, Aluminum Alloy

Pneumatic Manifold Air Distribution Block, G1/2 Supply Port, G1/4-Inch Output Port, Aluminum Alloy

More Info
Highlighted Features
  • Air manifold for distributing pneumatic power to multiple locations from a single source.
  • Two G1/2" inlet ports and two G1/4" outlet ports.
  • High pressure resistance and strong sealing.
  • Efficient and stable performance, easy to install and sustainable.
  • It is suitable for air compressor or storage gas equipment branch outlet, or used as supporting parts of machine equipment, generally installed in the gas terminal branch interface or engineering wiring pipeline branch.

 

 

As of this posting, these are available in sizes ranging from 2 way/4 port to 10 way/12 port.

These have a port on both sides along with a number of ports down the body of the block.  I think the end ports would generally be used for inlet and outlet.

This could be used as the basis for a DIY manifold build. Since these feature 1/4″ threads you could use compatible ball valves and plugs or use the right DuoTight fittings for your application.

You can get an extra outlet out of your build by using one of the ends as another keg trunk. So, the 2 way/4 port would have one inlet and for keg ports, you could use both the body ports as well as what would usually be used as outlet.

2 Way Pneumatic Manifold Air Distribution Block, G1/2 Supply Port, G1/4-Inch Output Port, Aluminum Alloy – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

New models show up regularly… shop around: Search Amazon for “pneumatic manifold block” to see what models are available.

Related:

duotightreview

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources
standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

Two Way Ball Lock Post Manifold

TSTabc 2 Way Gas Distribution Co2 Distributor Manifold With Ball Lock Disconnect post,co2 Splitter for Homebrew Beer Making Brewing Tool(2 way), Sliver

TSTabc 2 Way Gas Distribution Co2 Distributor Manifold With Ball Lock Disconnect post,co2 Splitter for Homebrew Beer Making Brewing Too

More Info



 

Also Consider: Stainless Steel Jumpers from Valuebrew those allow you to clean multiple ball lock keg lines at the same time.

TSTabc 2 Way Gas Distribution Co2 Distributor Manifold With Ball Lock Disconnect post,co2 Splitter for Homebrew Beer Making Brewing Tool(2 way), Sliver – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also Consider:

ball lock jumperStainless Steel Ball Lock Jumper with Food Grade Silicone O-Rings: Allows you to connect multiple ball lock runs to clean multiple lines and taps at the same time. Works with both liquid and gas QDs.  Stainless Steel Ball Lock Jumper – via Valuebrew – An easy add-on… food grade o-rings, featured in our Keg Rebuild Post

Continue reading

Ferroday 4 Way CO2 Manifold + Clamps – Serve Multiple Kegs

4 Way CO2 Manifold

More Info


Highlighted Features
  • Efficient Utilization of CO2: Four way gas manifold can easily running 4 lines from one CO2 source to split the gas supply and meanwhile achieving more efficient use of CO2 easily. Inlet & Outlet are all 5/16" barbed fittings fit for most home brew gas tubes
  • Well Made Commercial Standard: Machined from a single piece of solid aluminum, high-impact metal, cast brass and stainless steel, and anti-rust chrome plated every stem. Aluminum is lighter than normal steel but still high durability and high impact resistance, great for both home use and commercial use
  • Independent Shut Off & Built-in Check Valve: Please remember to open the check valve before use, otherwise the gas will not circulate! Each line has its own built-in check valve, all checked after assembly, no failures, no back flow. Each line has its own shut off valve for independent flow control, use this four port manifold to control multiple lines easily
  • Pre-examination & Easy Installation: Water tested after assembly ensures no air leaks. Every unit has been internally cleaned before assembly for better air distribution. Preformed mounting holes on the distributor allow you to secure the manifold on walls or kegs easily in few minutes
  • Add to Cart with No Regret: FERRODAY 4 way gas manifold is ideal for home brewers, bars owners and breweries to easily split gas for beverage dispensing and forced carbonation. We are committed to offer you with high quality product and thoughtful customer service

 

Use to pressurize multiple kegs off one co2 regulator.  Check valves stop beer or other liquids from back feeding into other lines or your regulator.

FERRODAY 4 Way Gas Manifold 5/16″ Barbed Integrated Check Valves CO2 Distributor Independent Shut Off CO2 Manifold Gas Distributor for Home Brew Beer Brew – 1 Gas Manifold + 5 Hose Clamps – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Ferroday 4 Way CO2 Manifold + Clamps – Serve Multiple Kegs

4 Way CO2 Manifold

More Info


Highlighted Features
  • Efficient Utilization of CO2: Four way gas manifold can easily running 4 lines from one CO2 source to split the gas supply and meanwhile achieving more efficient use of CO2 easily. Inlet & Outlet are all 5/16" barbed fittings fit for most home brew gas tubes
  • Well Made Commercial Standard: Machined from a single piece of solid aluminum, high-impact metal, cast brass and stainless steel, and anti-rust chrome plated every stem. Aluminum is lighter than normal steel but still high durability and high impact resistance, great for both home use and commercial use
  • Independent Shut Off & Built-in Check Valve: Please remember to open the check valve before use, otherwise the gas will not circulate! Each line has its own built-in check valve, all checked after assembly, no failures, no back flow. Each line has its own shut off valve for independent flow control, use this four port manifold to control multiple lines easily
  • Pre-examination & Easy Installation: Water tested after assembly ensures no air leaks. Every unit has been internally cleaned before assembly for better air distribution. Preformed mounting holes on the distributor allow you to secure the manifold on walls or kegs easily in few minutes
  • Add to Cart with No Regret: FERRODAY 4 way gas manifold is ideal for home brewers, bars owners and breweries to easily split gas for beverage dispensing and forced carbonation. We are committed to offer you with high quality product and thoughtful customer service

 

Use to pressurize multiple kegs off one co2 regulator.  Check valves stop beer or other liquids from back feeding into other lines or your regulator.

FERRODAY 4 Way Gas Manifold 5/16″ Barbed Integrated Check Valves CO2 Distributor Independent Shut Off CO2 Manifold Gas Distributor for Home Brew Beer Brew – 1 Gas Manifold + 5 Hose Clamps – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

4 Way CO2 Manifold – $27.99 + Free Ship Eligible, Limited Availability + Our Top Draft Resources

Gas Manifold - 1/4 in. (Aluminum) D1811

Gas Manifold – 1/4 in. (Aluminum) from MoreBeer.

Use to serve multiple kegs in our kegerator using a single tank and regulator


From the product description, check product page for current description, price and availability:

Manifolds are a great way to have one CO2 tank supply multiple kegs. This manifold is made from aluminum, brass, and stainless. It also works up to 100 psi and includes 1/4 in ball valves with built in check valves. Another ball valve can be added to the end of the manifold for an additional gas line.

  • 1/4 in ball valves
  • Rated up to 100 psi
  • Screw holes for easy mounting
  • Optional additional port on the end

Limited Availability Deal of the Day: As of this posting, this is marked down to $27.99 as a MoreBeer Deal of the DayShipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Why This is a Great Deal: My general rule of thumb for what constitutes a good deal on a CO2 manifold is anything less than $10 per trunk.  This one is selling for $27.99.  That figures to just $7.00 per trunk.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

Gas Manifold – 1/4 in. (Aluminum) D1811

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Two Way Gas Manifolds with MFL – $21.99 at MoreBeer + Easy Conversion to DuoTight

Aluminum Gas Mainfold - 2 Way - 1/4 in. Flare D1857

Aluminum Gas Mainfold – 2 Way – 1/4 in. Flare D1857

Convert to DuoTight!

Build a DuoTight CO2 Gas Manifold! – for Kegland EVABarrier Tubing

Want to Learn More about DuoTights and EVABarrier Tubing?  

duotightreview

Continue reading

2 Way CO2 Manifold – Serve Multiple Kegs

Homebrewers Outpost - D1802 Gas Manifold - 2 Way Aluminum (Keg King) 1/4" Barb

2 Way CO2 Manifold

More Info

Highlighted Features
  • Split your gas line to serve multiple kegs with this manifold
  • Splits one gas feed to two, each with their own shutoff/check valve
  • Aluminum body construction, with brass barbs & stainless shutoffs
  • Screw holes for easy mounting
  • 1/4 inch

 

Use to pressurize multiple kegs off one co2 regulator.  Check valves stop beer or other liquids from back feeding into other lines or your regulator.

Homebrewers Outpost – D1802 Gas Manifold – 2 Way Aluminum (Keg King) 1/4″ Barb – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Yaebrew 4 Way CO2 Manifold w/Shutoffs & Check Valves

YaeBrew Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold – Splitter 1/4″ Barb Fittings (4 Way)

More Info



 

Use to pressurize multiple kegs off one co2 regulator.

YaeBrew Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold – Splitter 1/4″ Barb Fittings (4 Way) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

3 way MFL CO2 Manifold + Convert it to DuoTight!

CO2 Manifold

More Info


Highlighted Features
  • INCLUDED: Each 3-Way CO2 Air Distributor/Manifold comes with integrated check valves, independent shut-offs, and MFL fittings. We also conveniently include three 5/16” barbs/stems and three swivel nuts, which are standard for gas lines in the beer industry. The three curved white washers are included to ensure there is no metal-to-metal contact, which aids in preventing air loss. As your drafts system grows, this manifold system can grow along with it, by simply removing the 1/4" brass plug.
  • INDEPENDENT SHUT-OFFS: The independent shut-offs not only allow you to choose which keg(s) to provide gas to, they also give you the ability to fix, clean, or swap out kegs without depressurizing your entire kegging system.
  • INTEGRATED CHECK VALVES: Each beer line also has a check valve that stops the beer from flowing backward. This eliminates the chance of beer accidentally flowing from one keg to another. Check valves also keep beer from backing up into your CO2 Regulator, as well as from contaminating your gas lines.
  • DOUBLE SEAL GUARANTEE: We use premium Teflon tape, along with NSF-approved TRU-BLU thread sealant (Not Included). This guarantees a superior seal, while still allowing you to remove or reinstall your check valves for any reason. Most competitors use superglue, which doesn’t allow you to disassemble parts for cleaning, repairs, or changes.
  • 5-YEAR WARRANTY: With your purchase comes a 5-year warranty on parts and labor. We will repair or replace this product for the first 5-years, and in most cases will extend the warranty if need be. We pride ourselves on offering high-quality products that are made to last. Each manifold is assembled in our Texas warehouse, and our team also takes care of any repairs or replacements. Customer service is our #1 priority. Therefore, please contact us with any questions or issues.

 

 

CO2 manifolds allow you to feed multiple kegs off one co2 regulator.  Things to look for in a capable manifold are shut-off valves for each trunk and check valves.  Check valves makes sure flow goes the right directly.  This is important for CO2 manifolds because differences in pressure make it possible for liquid to back flow through gas lines.

Since this features MFL connections, it could easily be converted to DuoTight. The inlet is a barb fitting. You should be able to easily remove that and replace it with Kegland KL06897.

3-Way CO2 Air Distributor/Manifold with Integrated Check Valves and MFL Fittings | Perfect for Homebrew Draft Systems & Commercial Kegerators | Includes (3) 5/16 Inch Barbs/Stems & (3) Swivel Nuts – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

More About DuoTight…

Continue reading

Two Way Ball Lock Post Manifold

TSTabc 2 Way Gas Distribution Co2 Distributor Manifold With Ball Lock Disconnect post,co2 Splitter for Homebrew Beer Making Brewing Tool(2 way), Sliver

TSTabc 2 Way Gas Distribution Co2 Distributor Manifold With Ball Lock Disconnect post,co2 Splitter for Homebrew Beer Making Brewing Too

More Info



 

Also Consider: Stainless Steel Jumpers from Valuebrew those allow you to clean multiple ball lock keg lines at the same time.

TSTabc 2 Way Gas Distribution Co2 Distributor Manifold With Ball Lock Disconnect post,co2 Splitter for Homebrew Beer Making Brewing Tool(2 way), Sliver – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also Consider:

ball lock jumperStainless Steel Ball Lock Jumper with Food Grade Silicone O-Rings: Allows you to connect multiple ball lock runs to clean multiple lines and taps at the same time. Works with both liquid and gas QDs.  Stainless Steel Ball Lock Jumper – via Valuebrew – An easy add-on… food grade o-rings, featured in our Keg Rebuild Post

Continue reading

Yaebrew FIVE Way CO2 Manifold w/Shutoffs & Check Valves

YaeBrew Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold 5/16" - 5 Way

5 way CO2 Manifold by YaeBrew


From the product description, check product page for current description, price and availability:

  • 5/16” barbed inlets and outlets
  • Shutoffs with built-in check valves
  • YaeBrew Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold 5/16″ – 5 Way

Use to pressurize multiple kegs off one co2 regulator.

YaeBrew Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold 5/16″ – 5 Way – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Yaebrew 4 Way CO2 Manifold w/Shutoffs & Check Valves

YaeBrew Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold – Splitter 1/4″ Barb Fittings (4 Way)

More Info



 

Use to pressurize multiple kegs off one co2 regulator.

YaeBrew Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold – Splitter 1/4″ Barb Fittings (4 Way) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

4 Way CO2 Manifold – $27.99 + Free Ship Eligible, Limited Availability + Our Top Draft Resources

Gas Manifold - 1/4 in. (Aluminum) D1811

Gas Manifold – 1/4 in. (Aluminum) from MoreBeer.

Use to serve multiple kegs in our kegerator using a single tank and regulator


From the product description, check product page for current description, price and availability:

Manifolds are a great way to have one CO2 tank supply multiple kegs. This manifold is made from aluminum, brass, and stainless. It also works up to 100 psi and includes 1/4 in ball valves with built in check valves. Another ball valve can be added to the end of the manifold for an additional gas line.

  • 1/4 in ball valves
  • Rated up to 100 psi
  • Screw holes for easy mounting
  • Optional additional port on the end

Limited Availability Deal of the Day: As of this posting, this is marked down to $27.99 as a MoreBeer Deal of the DayShipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Why This is a Great Deal: My general rule of thumb for what constitutes a good deal on a CO2 manifold is anything less than $10 per trunk.  This one is selling for $27.99.  That figures to just $7.00 per trunk.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

Gas Manifold – 1/4 in. (Aluminum) D1811

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

2 Way CO2 Manifold – Serve Multiple Kegs

Homebrewers Outpost - D1802 Gas Manifold - 2 Way Aluminum (Keg King) 1/4" Barb

2 Way CO2 Manifold

More Info


Highlighted Features
  • Split your gas line to serve multiple kegs with this manifold
  • Splits one gas feed to two, each with their own shutoff/check valve
  • Aluminum body construction, with brass barbs & stainless shutoffs
  • Screw holes for easy mounting
  • 1/4 inch

 

Use to pressurize multiple kegs off one co2 regulator.  Check valves stop beer or other liquids from back feeding into other lines or your regulator.

Homebrewers Outpost – D1802 Gas Manifold – 2 Way Aluminum (Keg King) 1/4″ Barb – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Two Way Gas Manifolds with MFL – $21.99 at MoreBeer + Easy Conversion to DuoTight

Aluminum Gas Mainfold - 2 Way - 1/4 in. Flare D1857

Aluminum Gas Mainfold – 2 Way – 1/4 in. Flare D1857

Convert to DuoTight!

Build a DuoTight CO2 Gas Manifold! – for Kegland EVABarrier Tubing

Want to Learn More about DuoTights and EVABarrier Tubing?  

duotightreview

Continue reading

Yaebrew 4 Way CO2 Manifold w/Shutoffs & Check Valves

YaeBrew Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold – Splitter 1/4″ Barb Fittings (4 Way)

More Info

 

Use to pressurize multiple kegs off one co2 regulator.

YaeBrew Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold – Splitter 1/4″ Barb Fittings (4 Way) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Two Way Ball Lock Post Manifold

TSTabc 2 Way Gas Distribution Co2 Distributor Manifold With Ball Lock Disconnect post,co2 Splitter for Homebrew Beer Making Brewing Tool(2 way), Sliver

TSTabc 2 Way Gas Distribution Co2 Distributor Manifold With Ball Lock Disconnect post,co2 Splitter for Homebrew Beer Making Brewing Too

More Info



 

Also Consider: Stainless Steel Jumpers from Valuebrew those allow you to clean multiple ball lock keg lines at the same time.

TSTabc 2 Way Gas Distribution Co2 Distributor Manifold With Ball Lock Disconnect post,co2 Splitter for Homebrew Beer Making Brewing Tool(2 way), Sliver – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also Consider:

ball lock jumperStainless Steel Ball Lock Jumper with Food Grade Silicone O-Rings: Allows you to connect multiple ball lock runs to clean multiple lines and taps at the same time. Works with both liquid and gas QDs.  Stainless Steel Ball Lock Jumper – via Valuebrew – An easy add-on… food grade o-rings, featured in our Keg Rebuild Post

Continue reading

3 Way CO2 Manifold with MFL – easy conversion to DuoTight! – Stacking Deals

Air Distributor - 3 way, With Check Valves

3 Way CO2 Distributor with Check Valves via Keg Connection

More Info

From the product description, check product page for current description, price and availability:

CO2 Air Distributor / Manifold for Draft Beer with Check Valves, 3 Way

Assembled in the USA from high quality components, by our experienced staff for over 15 years. We take price in every air distributor we make and provide you with a 5 year, written warranty.

Vigorously tested under pressure using an industry standard soap leak test method.

We use both Teflon and NSF approved, USA made, Rectorseal “Tru-Blu” Pipe Thread Sealant for a double leak proof seal. These products also allow for easy removal for changes or future repairs. It is also vibration resistant.

Customize to fit your needs. Change inlet and outlet sizes.

You can use this to expand current air distributors / manifolds. Just choose 1/4″ MPT and add to existing body!

Our bodies are made from quality extruded aluminum and we use high quality brass components.

Check valves are used to ensure gas goes out, but no liquid can come back in should you have a negative pressure situation. This can happen with beer and soda distribution and damage regulators or other components, make sure your air distributor has check valves! The valves are constructed of brass and the valves can turn off in either direction.

Features mounting holes for easy mounting in Kegerators, Keezers or on a wall.

Can be used for splitting beer lines between different kegs of beer, soda, kombucha or other liquids. Can also be used for force carbonating situations. Turn off all the other valves and use one or more to force carbonate. You can always turn off lines independently that you are not using.


 

CO2 manifolds allow you to feed multiple kegs off one co2 regulator.  Things to look for in a capable manifold are shut-off valves for each trunk and check valves.  Check valves makes sure flow goes the right directly.  This is important for CO2 manifolds because differences in pressure make it possible for liquid to back flow through gas lines.

Keg Connection has an extensive lineup of CO2 manifolds. They sport check valves, MFL barbs (choose from 1/4″ or 5/16″) and ball valves for each run.  the body is crafted from extruded aluminum.  These are also tested for leaks.  2, 3, 4, 5, 6, 7 and 8 way configurations are available

This particular model has MFL ball valves. You can also choose and MFL inlet port. Because you can choose MFL/flare for all connections, that means you can easily convert it to DuoTight.  See my post on putting together a DuoTight Manifold

  • 16% Off Everything at Keg Connection: Keg Connection is discount nearly everything site wide by 16%. This is a rare sitewide/percent off deal. No coupon code is required, discounts reflected on each product page.
  • HBF Readers Save More!  Coupon code HBF5OFF saves you 5% off EVERYTHING site wide.  Stacks with all non-coupon sales
  • These deals stack and work with Keg Connection’s entire lineup of CO2 manifolds.
  • Shipping is a flat fee no matter how much you order to addressed in the contiguous US.

Air Distributor – 3 way, With Check ValvesComplete Lineup

duotightreview

Some everyday great deals and unique items at Keg Connection…

Parts and Diagrams:

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

Ball Lock Post Manifold!

TSTabc 2 Way Gas Distribution Co2 Distributor Manifold With Ball Lock Disconnect post,co2 Splitter for Homebrew Beer Making Brewing Tool(2 way), Sliver

TSTabc 2 Way Gas Distribution Co2 Distributor Manifold With Ball Lock Disconnect post,co2 Splitter for Homebrew Beer Making Brewing Too

More Info



 

Also Consider: Stainless Steel Jumpers from Valuebrew those allow you to clean multiple ball lock keg lines at the same time.

TSTabc 2 Way Gas Distribution Co2 Distributor Manifold With Ball Lock Disconnect post,co2 Splitter for Homebrew Beer Making Brewing Tool(2 way), Sliver – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also Consider:

ball lock jumperStainless Steel Ball Lock Jumper with Food Grade Silicone O-Rings: Allows you to connect multiple ball lock runs to clean multiple lines and taps at the same time. Works with both liquid and gas QDs.  Stainless Steel Ball Lock Jumper – via Valuebrew – An easy add-on… food grade o-rings, featured in our Keg Rebuild Post

Continue reading

4 Way CO2 Manifold – $27.99 + Free Ship Eligible, Limited Availability + Our Top Draft Resources

Gas Manifold - 1/4 in. (Aluminum) D1811

Gas Manifold – 1/4 in. (Aluminum) from MoreBeer.

Use to serve multiple kegs in our kegerator using a single tank and regulator


From the product description, check product page for current description, price and availability:

Manifolds are a great way to have one CO2 tank supply multiple kegs. This manifold is made from aluminum, brass, and stainless. It also works up to 100 psi and includes 1/4 in ball valves with built in check valves. Another ball valve can be added to the end of the manifold for an additional gas line.

  • 1/4 in ball valves
  • Rated up to 100 psi
  • Screw holes for easy mounting
  • Optional additional port on the end

Limited Availability Deal of the Day: As of this posting, this is marked down to $27.99 as a MoreBeer Deal of the DayShipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Why This is a Great Deal: My general rule of thumb for what constitutes a good deal on a CO2 manifold is anything less than $10 per trunk.  This one is selling for $27.99.  That figures to just $7.00 per trunk.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

Gas Manifold – 1/4 in. (Aluminum) D1811

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer