Category Archives: Manifolds

Ball Lock Post Manifold!

TSTabc 2 Way Gas Distribution Co2 Distributor Manifold With Ball Lock Disconnect post,co2 Splitter for Homebrew Beer Making Brewing Tool(2 way), Sliver

TSTabc 2 Way Gas Distribution Co2 Distributor Manifold With Ball Lock Disconnect post,co2 Splitter for Homebrew Beer Making Brewing Too

More Info

 

Also Consider: Stainless Steel Jumpers from Valuebrew those allow you to clean multiple ball lock keg lines at the same time.

TSTabc 2 Way Gas Distribution Co2 Distributor Manifold With Ball Lock Disconnect post,co2 Splitter for Homebrew Beer Making Brewing Tool(2 way), Sliver – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also Consider:

ball lock jumperStainless Steel Ball Lock Jumper with Food Grade Silicone O-Rings: Allows you to connect multiple ball lock runs to clean multiple lines and taps at the same time. Works with both liquid and gas QDs.  Stainless Steel Ball Lock Jumper – via Valuebrew – An easy add-on… food grade o-rings, featured in our Keg Rebuild Post

Continue reading

4 Way CO2 Manifold – $27.99 + Free Ship Eligible, Limited Availability + Our Top Draft Resources

Gas Manifold - 1/4 in. (Aluminum) D1811

Gas Manifold – 1/4 in. (Aluminum) from MoreBeer.

Use to serve multiple kegs in our kegerator using a single tank and regulator


From the product description, check product page for current description, price and availability:

Manifolds are a great way to have one CO2 tank supply multiple kegs. This manifold is made from aluminum, brass, and stainless. It also works up to 100 psi and includes 1/4 in ball valves with built in check valves. Another ball valve can be added to the end of the manifold for an additional gas line.

  • 1/4 in ball valves
  • Rated up to 100 psi
  • Screw holes for easy mounting
  • Optional additional port on the end

Limited Availability Deal of the Day: As of this posting, this is marked down to $27.99 as a MoreBeer Deal of the DayShipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Why This is a Great Deal: My general rule of thumb for what constitutes a good deal on a CO2 manifold is anything less than $10 per trunk.  This one is selling for $27.99.  That figures to just $7.00 per trunk.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

Gas Manifold – 1/4 in. (Aluminum) D1811

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources
standarddraft

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

2 Way CO2 Manifold w/Shutoffs & Check Valves

Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold - Splitter 5/16" Barb Fittings (2 way 5/16" Barb)

Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold – Splitter 5/16″ Barb Fittings (2 way 5/16″ Barb)

More Info

From the product description, check product page for current description, price and availability:

  • The gas manifold body is made of high quality aluminum. The inlet barb & hexagon nut is made of brass. The switch valve is made of copper plated zinc.So our gas manifold is lighter & durable than steel
  • 2 way gas manifold allow you to supply CO2 for your several beer kegs. The gas manifold also provide the extra gas inlet for beer keg
  • 【No Leaks & Independent Shunt】: The integrated check valves can prevent backflow of gas or liquid and protect your splitter. Every switch valve has their handles to control the gas flow,so each gas line will not affect the airflow of other kegs
  • 【Easy To Use】: The gas manifold come with 5/16″ barb OD outlets & inlets. Inlet barb can connect with CO2 tank by hose. And the barb of shutoff valve can connect with your keg by hose to achieve carbonating beer
  • 【Faster To Install】:Just need two screws or nails,you can easily secure this gas manifold on walls or kegerators. A gas manifold can split the delivery of CO2 into several parts to serve the draft beer system

 

Use to pressurize multiple kegs off one co2 regulator.

Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold – Splitter 5/16″ Barb Fittings (2 way 5/16″ Barb) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Keg Connection Kegerator Expansion Kits – Out of Stock = Free Upgrades!

Homebrew Expansion Kits from Keg Connection: These kit upgrades will allow you to expand your existing system and add additional dispense lines. These are organized by gas sides and liquid sides. Because of this, if you just need to add additional gas lines for force carbonating, you can do that as well.

Keg Connection has sold out of 2 and 4 way manifolds but is giving free upgrades to the next size up. From KC…

*UPDATE* We are out of 2 way manifolds and 4 way manifolds BUT you can order them below and we’ll give you a FREE upgrade to a manifold with an additional valve. Meaning: any 2 way manifolds ordered will receive a 3 way manifold and any 4 way manifolds ordered will receive a 5 way manifold.

Your manifold will still be configured with the appropriate amount of gas line tubing and disconnects as stated in the product listing (ex: 2 way manifolds will have two lines of gas tubing, two disconnects BUT a third check valve on the manifold so you can upgrade to an additional gas line and disconnect in the future at your convenience!).

Why a Manifold?  CO2 manifolds allow you to feed multiple kegs off one co2 regulator.  Things to look for in a capable manifold are shut-off valves for each trunk and check valves.  Check valves makes sure flow goes the right directly.  This is important for CO2 manifolds because differences in pressure make it possible for liquid to back flow through gas lines.

  • Shipping is a flat fee no matter how much you order to addressed in the contiguous US.
  • HBF Readers Save More! HBF5OFF takes another 5% off.

Homebrew Expansion Kits

Air Distributors at Keg Connection

Continue reading

The Weekend Brewer 2-way MFL CO2 Manifold + Convert it to DuoTight!

The Weekend Brewer 2-way MFL CO2 Splitter Distributor Manifold with integrated check valves

The Weekend Brewer 2-way MFL CO2 Splitter Distributor Manifold with integrated check valves

More Info

From the product description, check product page for current description, price and availability:

  • Light and durable aluminum body is lighter than steel but remains Durable and long lasting. Aluminum is the industry standard for Co2 manifolds for their strength and resistance to corrosion. This manifold is ideal for homebrewers, bars, or anyone who is looking to easily split gas for beer or beverage dispensing and even for force carbonation.
  • Integrated high quality check valve outputs prevent liquid from flowing into the manifold and your regulator. Don’t worry about dirty lines or ruined regulators ever again! Every integrated check valve ensures that your beer stays on the right side of the line.
  • No leaks due to ample thread tape and vigorous water testing after assembly. All manifolds are internally cleaned before assembly for the purest air possible. Don’t settle for mass produced, low quality manifolds from overseas. The Weekend Brewer manifold is the highest quality manifold on the market due to rigorous testing and quality control.
  • Mounting holes allows for easy installation on walls or kegerators. Two screws or nails will easily secure your manifold to any surface for ease of use.
  • Made in the USA these manifolds are assembled by American workers in our fayetteville, AR facility.

 

 

CO2 manifolds allow you to feed multiple kegs off one co2 regulator.  Things to look for in a capable manifold are shut-off valves for each trunk and check valves.  Check valves makes sure flow goes the right directly.  This is important for CO2 manifolds because differences in pressure make it possible for liquid to back flow through gas lines.

I have two posts about the 4 way version of this manifold.  A Hands on Review and a walk-through to convert it to DuoTight.

The Weekend Brewer 2-way MFL CO2 Splitter Distributor Manifold with integrated check valves – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Build a DuoTight CO2 Gas Manifold! – for Kegland EVABarrier Tubing

duotightreview

2 Way CO2 Manifold w/Shutoffs & Check Valves

2-Way Gas Manifold CO2 Distributor Manifold 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves Homebrew Beer Making Brewing Tool

Two Way CO2 Manfiold.  Shut offs & built in check valves

More Info

From the product description, check product page for current description, price and availability:

  • 🍺 Gas Manifold, A built-in check valve protects your shunt and prevents gas back flow.
  • 🍺 Due to the one-way valve mechanism, the pressure drop between the ball valves in these manifolds is approximately 2 psi. You will need to set the pressure on the regulator to 2 psi above the pressure required in the keg.
  • 🍺 Run multiple lines from one CO2 source. The distributor allows you to split the gas supply into multiple lines. Each line has its own shutoff valve.
  • 🍺 There is a 2-point screw hole on the top for easy installation to other equipment. 5/16″ barbed inlet and 5/16″ barbed outlets.
  • 🍺 Made of aluminum, brass and stainless steel material, it is extremely durable.

 

Use to pressurize multiple kegs off one co2 regulator

2-Way Gas Manifold CO2 Distributor Manifold 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves Homebrew Beer Making Brewing Tool – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

2 Way CO2 Manifold w/Shutoffs & Check Valves

Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold - Splitter 5/16" Barb Fittings (2 way 5/16" Barb)

Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold – Splitter 5/16″ Barb Fittings (2 way 5/16″ Barb)

More Info

From the product description, check product page for current description, price and availability:

  • The gas manifold body is made of high quality aluminum. The inlet barb & hexagon nut is made of brass. The switch valve is made of copper plated zinc.So our gas manifold is lighter & durable than steel
  • 2 way gas manifold allow you to supply CO2 for your several beer kegs. The gas manifold also provide the extra gas inlet for beer keg
  • 【No Leaks & Independent Shunt】: The integrated check valves can prevent backflow of gas or liquid and protect your splitter. Every switch valve has their handles to control the gas flow,so each gas line will not affect the airflow of other kegs
  • 【Easy To Use】: The gas manifold come with 5/16″ barb OD outlets & inlets. Inlet barb can connect with CO2 tank by hose. And the barb of shutoff valve can connect with your keg by hose to achieve carbonating beer
  • 【Faster To Install】:Just need two screws or nails,you can easily secure this gas manifold on walls or kegerators. A gas manifold can split the delivery of CO2 into several parts to serve the draft beer system

 

Use to pressurize multiple kegs off one co2 regulator.

Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold – Splitter 5/16″ Barb Fittings (2 way 5/16″ Barb) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Save via Cyber Monday Sale! KOMOS Gas Manifolds – Easy Conversion to DuoTight

KOMOS® Aluminum Gas Manifold – 1/4 in. Flare via MoreBeer

From the product description, check product page for current description, price and availability:

Gas manifolds are the best way to provide CO2 to multiple kegs inside your kegerator or keezer. The KOMOS manifold features 1/4″ flare gas inlet and check valves that provide much more flexibility compared to manifolds with barbed valves. Choose the type and size of draft tubing that you prefer. Use 1/4″ or 5/16″ gas line with the appropriate Flare Fitting Set (KEG607 or KEG640), or use EVABarrier—our draft line of choice—with the appropriately sized Duotight Fitting (DUO106 or DUO120).

You can also replace one or more of the check valves with a Ball Lock Post Bulkhead, which allows you to use a gas-in ball lock jumper line as a quick connect option.

Need something bigger than a 4-way manifold? No problem! With this 1/4″ Nipple, you can join multiple manifolds for as many outlets as you need.

Features:

  • 1/4″ Flare connections
  • 1/4″ BSP ball valves
  • Rated to 100 psi
  • Wall mount holes
  • Made from aluminum, brass, and stainless steel

[/expand]

 

All variations of these are on sale via MoreBeer’s soon ending Cyber Monday Sale. These can be hard to find in stock let alone on sale.

KOMOS® Aluminum Gas Manifold – 1/4 in. Flare

Check sale or product page for current availability & pricing

Convert to DuoTight!

Build a DuoTight CO2 Gas Manifold! – for Kegland EVABarrier Tubing

Want to Learn More about DuoTights and EVABarrier Tubing?  

duotightreview

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Four Way CO2 Manifold w/Shutoffs & Check Valves

4-Way Gas Manifold CO2 Distributor Manifold 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves Homebrew Beer Making Brewing Tool

4 way CO2 Manifold


From the product description, check product page for current description, price and availability:

  • Gas Manifold, A built-in check valve protects your shunt and prevents gas backflow.
  • Due to the one-way valve mechanism, the pressure drop between the ball valves in these manifolds is approximately 2 psi. You will need to set the pressure on the regulator to 2 psi above the pressure required in the keg.)
  • Run multiple lines from one CO2 source. The distributor allows you to split the gas supply into multiple lines. Each line has its own shutoff valve.
  • There is a 2-point screw hole on the top for easy installation to other equipment. 5/16″ barbed inlet and 5/16″ barbed outlets.

Use to pressurize multiple kegs off one co2 regulator.

4-Way Gas Manifold CO2 Distributor Manifold 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves Homebrew Beer Making Brewing Tool – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

3 Way CO2 Manifold – $22.99, Limited Availability + Our Top Draft Resources

Gas Manifold - 1/4 in. (Aluminum) D1807

Gas Manifold – 1/4 in. (Aluminum) from MoreBeer

Use to serve multiple kegs in our kegerator using a single tank and regulator

More Info

From the product description, check product page for current description, price and availability:

Manifolds are a great way to have one CO2 tank supply multiple kegs. This manifold is made from aluminum, brass, and stainless. It also works up to 100 psi and includes 1/4 in ball valves with built in check valves. Another ball valve can be added to the end of the manifold for an additional gas line.

  • 1/4 in ball valves
  • Rated up to 100 psi
  • Screw holes for easy mounting
  • Optional additional port on the end

 

Limited Availability Deal of the Day: As of this posting, this is marked down to $22.99 as a MoreBeer Deal of the DayShipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Why This is a Great Deal: My general rule of thumb for what constitutes a good deal on a CO2 manifold is anything less than $10 per trunk.  This one is selling for $22.99.  That figures to just $7.63 per trunk.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

Note: I’ve seen the product page show the wrong version of this manifold.  Just look double check the description to make sure you’re getting the correct three way manifold.

Gas Manifold – 1/4 in. (Aluminum) D1807

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

2 Way CO2 Manifold w/Shutoffs & Check Valves

2-Way Gas Manifold CO2 Distributor Manifold 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves Homebrew Beer Making Brewing Tool

Two Way CO2 Manfiold.  Shut offs & built in check valves

More Info

From the product description, check product page for current description, price and availability:

  • 🍺 Gas Manifold, A built-in check valve protects your shunt and prevents gas back flow.
  • 🍺 Due to the one-way valve mechanism, the pressure drop between the ball valves in these manifolds is approximately 2 psi. You will need to set the pressure on the regulator to 2 psi above the pressure required in the keg.
  • 🍺 Run multiple lines from one CO2 source. The distributor allows you to split the gas supply into multiple lines. Each line has its own shutoff valve.
  • 🍺 There is a 2-point screw hole on the top for easy installation to other equipment. 5/16″ barbed inlet and 5/16″ barbed outlets.
  • 🍺 Made of aluminum, brass and stainless steel material, it is extremely durable.

 

Use to pressurize multiple kegs off one co2 regulator

2-Way Gas Manifold CO2 Distributor Manifold 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves Homebrew Beer Making Brewing Tool – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

2 Way CO2 Manifold w/Shutoffs & Check Valves

Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold - Splitter 5/16" Barb Fittings (2 way 5/16" Barb)

Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold – Splitter 5/16″ Barb Fittings (2 way 5/16″ Barb)

More Info

From the product description, check product page for current description, price and availability:

  • The gas manifold body is made of high quality aluminum. The inlet barb & hexagon nut is made of brass. The switch valve is made of copper plated zinc.So our gas manifold is lighter & durable than steel
  • 2 way gas manifold allow you to supply CO2 for your several beer kegs. The gas manifold also provide the extra gas inlet for beer keg
  • 【No Leaks & Independent Shunt】: The integrated check valves can prevent backflow of gas or liquid and protect your splitter. Every switch valve has their handles to control the gas flow,so each gas line will not affect the airflow of other kegs
  • 【Easy To Use】: The gas manifold come with 5/16″ barb OD outlets & inlets. Inlet barb can connect with CO2 tank by hose. And the barb of shutoff valve can connect with your keg by hose to achieve carbonating beer
  • 【Faster To Install】:Just need two screws or nails,you can easily secure this gas manifold on walls or kegerators. A gas manifold can split the delivery of CO2 into several parts to serve the draft beer system

 

Use to pressurize multiple kegs off one co2 regulator.

Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold – Splitter 5/16″ Barb Fittings (2 way 5/16″ Barb) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Four Way CO2 Manifold w/Shutoffs & Check Valves

4-Way Gas Manifold CO2 Distributor Manifold 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves Homebrew Beer Making Brewing Tool

4 way CO2 Manifold


From the product description, check product page for current description, price and availability:

  • Gas Manifold, A built-in check valve protects your shunt and prevents gas backflow.
  • Due to the one-way valve mechanism, the pressure drop between the ball valves in these manifolds is approximately 2 psi. You will need to set the pressure on the regulator to 2 psi above the pressure required in the keg.)
  • Run multiple lines from one CO2 source. The distributor allows you to split the gas supply into multiple lines. Each line has its own shutoff valve.
  • There is a 2-point screw hole on the top for easy installation to other equipment. 5/16″ barbed inlet and 5/16″ barbed outlets.

Use to pressurize multiple kegs off one co2 regulator.

4-Way Gas Manifold CO2 Distributor Manifold 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves Homebrew Beer Making Brewing Tool – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

25% Off Manifolds at Keg Connection, HBF Readers Save More + Easy Conversion to DuoTight

kegerator co2 manifold

Why a Manifold?  CO2 manifolds allow you to feed multiple kegs off one co2 regulator.  Things to look for in a capable manifold are shut-off valves for each trunk and check valves.  Check valves makes sure flow goes the right directly.  This is important for CO2 manifolds because differences in pressure make it possible for liquid to back flow through gas lines.

Keg Connection has an extensive lineup of CO2 manifolds. They sport check valves, MFL barbs (choose from 1/4″ or 5/16″) and ball valves for each run.  the body is crafted from extruded aluminum.  These are also tested for leaks.  2, 3, 4, 5, 6, 7 and 8 way configurations are available

  • For a short time Keg Connection has their entire lineup of manifolds marked down 25%.
  • Prices start at just $17.96.  No coupon code necessary, discounts reflected on each product page.
  • Shipping is a flat fee no matter how much you order to addressed in the contiguous US.
  • HBF Readers Save More! HBF5OFF takes another 5% off.

Air Distributors at Keg Connection

Continue reading

Yaebrew FIVE Way CO2 Manifold w/Shutoffs & Check Valves

YaeBrew Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold 5/16" - 5 Way

5 way CO2 Manifold by YaeBrew


From the product description, check product page for current description, price and availability:

  • 5/16” barbed inlets and outlets
  • Shutoffs with built-in check valves
  • YaeBrew Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold 5/16″ – 5 Way

Use to pressurize multiple kegs off one co2 regulator.

YaeBrew Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold 5/16″ – 5 Way – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

2 Way CO2 Manifold w/Shutoffs & Check Valves

2-Way Gas Manifold CO2 Distributor Manifold 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves Homebrew Beer Making Brewing Tool

Two Way CO2 Manfiold.  Shut offs & built in check valves

More Info

From the product description, check product page for current description, price and availability:

  • 🍺 Gas Manifold, A built-in check valve protects your shunt and prevents gas back flow.
  • 🍺 Due to the one-way valve mechanism, the pressure drop between the ball valves in these manifolds is approximately 2 psi. You will need to set the pressure on the regulator to 2 psi above the pressure required in the keg.
  • 🍺 Run multiple lines from one CO2 source. The distributor allows you to split the gas supply into multiple lines. Each line has its own shutoff valve.
  • 🍺 There is a 2-point screw hole on the top for easy installation to other equipment. 5/16″ barbed inlet and 5/16″ barbed outlets.
  • 🍺 Made of aluminum, brass and stainless steel material, it is extremely durable.

 

Use to pressurize multiple kegs off one co2 regulator

2-Way Gas Manifold CO2 Distributor Manifold 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves Homebrew Beer Making Brewing Tool – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Finally In Stock… KOMOS Gas Manifolds – Easy Conversion to DuoTight

KOMOS® Aluminum Gas Manifold – 1/4 in. Flare via MoreBeer

From the product description, check product page for current description, price and availability:

Due to high demand, the 3 & 4 way manifold is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more inventory.

Gas manifolds are the best way to provide CO2 to multiple kegs inside your kegerator or keezer. The KOMOS manifold features 1/4″ flare gas inlet and check valves that provide much more flexibility compared to manifolds with barbed valves. Choose the type and size of draft tubing that you prefer. Use 1/4″ or 5/16″ gas line with the appropriate Flare Fitting Set (KEG607 or KEG640), or use EVABarrier—our draft line of choice—with the appropriately sized Duotight Fitting (DUO106 or DUO120).

You can also replace one or more of the check valves with a Ball Lock Post Bulkhead, which allows you to use a gas-in ball lock jumper line as a quick connect option.

Need something bigger than a 4-way manifold? No problem! With this 1/4″ Nipple, you can join multiple manifolds for as many outlets as you need.

Features:

  • 1/4″ Flare connections
  • 1/4″ BSP ball valves
  • Rated to 100 psi
  • Wall mount holes
  • Made from aluminum, brass, and stainless steel

[/expand]

 

  • These have been out of stock for a long, long time. As of this posting, they’re back in stock. Check the product page to see if you can still get in on this shipment.
  • Get Free Shipping: Shipping is free with a qualifying $59 order to many US addresses
  • Some filler item ideas to help you qualify for free shipping… PBW, Sale Items (shows most popular deals first), Kit of the Week, Hop Market (shows most popular deals first)

KOMOS® Aluminum Gas Manifold – 1/4 in. Flare

Convert to DuoTight!

Build a DuoTight CO2 Gas Manifold! – for Kegland EVABarrier Tubing

Want to Learn More about DuoTights and EVABarrier Tubing?  

duotightreview

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

2 Way CO2 Manifold w/Shutoffs & Check Valves

Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold - Splitter 5/16" Barb Fittings (2 way 5/16" Barb)

Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold – Splitter 5/16″ Barb Fittings (2 way 5/16″ Barb)

More Info

From the product description, check product page for current description, price and availability:

  • The gas manifold body is made of high quality aluminum. The inlet barb & hexagon nut is made of brass. The switch valve is made of copper plated zinc.So our gas manifold is lighter & durable than steel
  • 2 way gas manifold allow you to supply CO2 for your several beer kegs. The gas manifold also provide the extra gas inlet for beer keg
  • 【No Leaks & Independent Shunt】: The integrated check valves can prevent backflow of gas or liquid and protect your splitter. Every switch valve has their handles to control the gas flow,so each gas line will not affect the airflow of other kegs
  • 【Easy To Use】: The gas manifold come with 5/16″ barb OD outlets & inlets. Inlet barb can connect with CO2 tank by hose. And the barb of shutoff valve can connect with your keg by hose to achieve carbonating beer
  • 【Faster To Install】:Just need two screws or nails,you can easily secure this gas manifold on walls or kegerators. A gas manifold can split the delivery of CO2 into several parts to serve the draft beer system

 

Use to pressurize multiple kegs off one co2 regulator.

Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold – Splitter 5/16″ Barb Fittings (2 way 5/16″ Barb) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

The Weekend Brewer 3-way MFL CO2 Manifold + Convert it to DuoTight

The Weekend Brewer 3-way MFL CO2 Distributor Manifold with integrated check valves

The Weekend Brewer 3-way MFL CO2 Distributor Manifold with integrated check valves

More Info

From the product description, check product page for current description, price and availability:

  • Light and durable aluminum body is lighter than steel but remains Durable and long lasting. Aluminum is the industry standard for Co2 manifolds for their strength and resistance to corrosion. This manifold is ideal for homebrewers, bars, or anyone who is looking to easily split gas for beer or beverage dispensing and even for force carbonation.
  • Integrated high quality check valve outputs prevent liquid from flowing into the manifold and your regulator. Don’t worry about dirty lines or ruined regulators ever again! Every integrated check valve ensures that your beer stays on the right side of the line.
  • No leaks due to ample thread tape and vigorous water testing after assembly. All manifolds are internally cleaned before assembly for the purest air possible. Don’t settle for mass produced, low quality manifolds from overseas. The Weekend Brewer manifold is the highest quality manifold on the market due to rigorous testing and quality control.
  • Mounting holes allows for easy installation on walls or kegerators. Two screws or nails will easily secure your manifold to any surface for ease of use.
  • Made in the USA these manifolds are assembled by American workers in our fayetteville, AR facility.

 

 

CO2 manifolds allow you to feed multiple kegs off one co2 regulator.  Things to look for in a capable manifold are shut-off valves for each trunk and check valves.  Check valves makes sure flow goes the right directly.  This is important for CO2 manifolds because differences in pressure make it possible for liquid to back flow through gas lines.

I have two posts about the 4 way version of this manifold.  A Hands on Review and a walk-through to convert it to DuoTight.

The Weekend Brewer 3-way MFL CO2 Distributor Manifold with integrated check valves – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Build a DuoTight CO2 Gas Manifold! – for Kegland EVABarrier Tubing

duotightreview

The Weekend Brewer 3-way MFL CO2 Manifold + Convert it to DuoTight!

The Weekend Brewer 3-way MFL CO2 Distributor Manifold with integrated check valves

The Weekend Brewer 3-way MFL CO2 Distributor Manifold with integrated check valves

More Info

From the product description, check product page for current description, price and availability:

  • Light and durable aluminum body is lighter than steel but remains Durable and long lasting. Aluminum is the industry standard for Co2 manifolds for their strength and resistance to corrosion. This manifold is ideal for homebrewers, bars, or anyone who is looking to easily split gas for beer or beverage dispensing and even for force carbonation.
  • Integrated high quality check valve outputs prevent liquid from flowing into the manifold and your regulator. Don’t worry about dirty lines or ruined regulators ever again! Every integrated check valve ensures that your beer stays on the right side of the line.
  • No leaks due to ample thread tape and vigorous water testing after assembly. All manifolds are internally cleaned before assembly for the purest air possible. Don’t settle for mass produced, low quality manifolds from overseas. The Weekend Brewer manifold is the highest quality manifold on the market due to rigorous testing and quality control.
  • Mounting holes allows for easy installation on walls or kegerators. Two screws or nails will easily secure your manifold to any surface for ease of use.
  • Made in the USA these manifolds are assembled by American workers in our fayetteville, AR facility.

 

 

CO2 manifolds allow you to feed multiple kegs off one co2 regulator.  Things to look for in a capable manifold are shut-off valves for each trunk and check valves.  Check valves makes sure flow goes the right directly.  This is important for CO2 manifolds because differences in pressure make it possible for liquid to back flow through gas lines.

I have two posts about the 4 way version of this manifold.  A Hands on Review and a walk-through to convert it to DuoTight.

The Weekend Brewer 3-way MFL CO2 Distributor Manifold with integrated check valves – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Build a DuoTight CO2 Gas Manifold! – for Kegland EVABarrier Tubing

duotightreview