Category Archives: Oxygenation

Oxygen System w/Stainless Wand, Tubing and .5 Micron Stone – $59.99

Oxgenation System from William’s Brewing

More Info

From the product description, check product page for current description, price and availability:

Why aerate your wort? Yeast needs oxygen to reproduce and produce strong cell walls. If the cell walls are weak, the yeast will have a low tolerance for alcohol, and can die before fully fermenting out the wort. Particularly in worts with starting gravities in excess of 1.050, this can contribute to long lag times, slow ferments, and higher than normal finishing gravities. Like an air stone in a fish tank provides oxygen for fish to breathe, wort aeration provides needed oxygen for yeast respiration and growth.

The advantage of the Oxygen Aeration System is that the wort can be aerated to 60% of its oxygen holding capacity in just 20 seconds, something that takes our Air Aeration System 5 minutes to accomplish. This shorter aeration means less foaming of the wort before pitching, an important consideration in higher gravity beers. This system includes a .5 micron aeration wand, for thorough oxygen dispersion.

Includes 22″ Aeration Wand with a .5 micron stainless aeration stone, 4′ of tubing, and an Oxygen Regulator for standard hardware store oxygen welding tanks. Pictured red oxygen bottle is not included, these disposable 1.4 and 2.1 ounce left hand thread bottles can be purchased at any hardware store in the welding or brazing section. One bottle will aerate 20 to 30 batches. Pictured glass carboy is not included.

Why buy a William’s Oxygen Aeration System? It has a 22″ U.S. made stainless wand, longer than any other system, so you can easily reach the bottom of a 5 or 6 gallon fermenter without dipping the plastic tubing into the wort.

Unlike other Oxygen Aeration Systems, which feature imported regulators and wands, all parts are made in U.S.A.

Includes oxygen regulator (made in the US) for use with disposable oxygen bottles (not included, typically found at local hardware stores), tubing, stainless steel wand and .5 micron aeration stone.

This is on sale for a limited time
Shipping is free or reasonably priced flat rate to addresses in the contiguous US depending on your order size for most items.

William’s Oxygen Aeration System

Check sale or product page for current availability & pricing

More Fermentation Related!

- Our Fermentation Related Reviews – Fermenters and More
- Yeast Starters and Fermentation Resource Page
- Yeast: The Practical Guide to Beer Fermentation

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:wmsoxysys

Oxyview Flow Meter [Assist with Wort Oxygenation]

Oxyview Flow Meter 1 3/8″ X 7/16″/0-3 L/M

From the product description, check product page for current description, price and availability:

OxyviewÂ is a pneumatic real-time oxygen flow meter for use with oxygen cylinders, concentrators and other oxygen delivery systems. This device can measure the flow rate of oxygen from 0-6 l/m. It can be attached at all times and used to assure and measure oxygen flow rate. No batteries are required for product operation. This unique flow meter works in any position and is resistant to heat, humidity and altitude.

Most regulators that homebrewers use for oxygenating wort are simple setups – Example – via MoreBeer. They attach to disposable oxygen tanks (typically sourced from a local hardware store) and are little more than on and off valves. No gauges, no pressure control (other than the degree to which you open and close the valve) and no flow control.

Time and rate give you an idea of how much oxygen you’re really adding to your wort. Time is easy to track. Rate, not so much, at least with typical homebrew O2 regulators. If you want more or less oxygen for your next batch, it’s mostly a guessing game.

The Oxyview Flow Meter is a pneumatic (no electricity required) real-time oxygen flow meter that works in any position. Flow rate is displayed in liters per minute. This particular model has a range of 0 to 3 LPM. This allows you to know what rate of oxygen is going into your wort.

I’ve used one of these for years and it has worked great for me. Note that these are typically used for medical applications. As such, the barb size isn’t what I’d call standard, at least by homebrewing standards. You will need to figure out tubing and connections to your existing regulator and aeration/oxygenation stone.

Oxyview Flow Meter 1 3/8″ X 7/16″/0-3 L/M

Also:

Oxygen Regulator – For Disposable Tanks w/Barb – MoreBeer
Oxygen Regulator – William’s Brewing

More Fermentation Related!

- Our Fermentation Related Reviews – Fermenters and More
- Yeast Starters and Fermentation Resource Page
- Yeast: The Practical Guide to Beer Fermentation

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions.

prod:B00ASBE2S2

1/2″ NPT Thread Stainless Steel Oxygenation/Aeration Diffusion Stone

Ferroday 2 Micron Inline Oxygenation Diffusion Stone Stainless Steel Aeration Stone 1/2 NPT Carbonation Stone With 1/4″ Barb For Home Brewing

More Info

From the product description, check product page for current description, price and availability:

【Food Grade 304 SS Material】 The Whole 2 micron inline diffusion stone(1/4 barb) is made of high quality 304 Stainless Steel,which let our 2 micron inline aeration stone is anti-corrosion & high temperature resistant & Durable
【Connected With Fittings】 1/2″ MPT diffusion stone can be installed into the 1/2″ FPT fitting or 1/4″ diameter for gas line to oxygen your wort & carbonating your beer. The diffusion stone can connect with kettle&pump&wort chiller by hose
【Lower Fermentation Times & Not Easily Get Clogged】 The 2 micron inline carbonation stone have millions of tiny pores ,so that this diffusion stone will quickly oxygenate wort & carbonate beer/soda prior to fermentation
【Detail Attention 】After carbonation, you can shake the beer keg.If do that, you beer can reach the best mouth-feel.Don’t touch the body of diffusion stone by your hands. The oils on your fingers can clog the small pores in the stone
【Boiled to Sanitize & Clean】 The 2 micron inline diffusion stone needs to be boiled in water to sanitize & unclog the pores.If the pores in aeration stone get blocked from handling give a 15 seconds dip in hydrochloric acid before rinsing with water

Ferroday 2 Micron Inline Oxygenation Diffusion Stone Stainless Steel Aeration Stone 1/2 NPT Carbonation Stone With 1/4″ Barb For Home Brewing – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

More Fermentation Related!

- Our Fermentation Related Reviews – Fermenters and More
- Yeast Starters and Fermentation Resource Page
- Yeast: The Practical Guide to Beer Fermentation

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Oxygenation Kit: Stainless Wand, Regulator, Stone and More

NY Brew Supply O2-REG14-OIS-WAND Oxygenation Kit with Stainless Wand. Includes: valve/regulator to attach to oxygen tank, 4Ft of silicone tubing, filter, stainless aeration wand with removable stone.

More Info

From the product description, check product page for current description, price and availability:

“Oxygenating your wort prior to pitching the yeast is a vital step in the brewing process that many brewers do not pay much attention to. Ideally your wort would have an oxygen level of 8 PPM (parts per million) however most brewers only achieve 2.5-4.5 PPM without using an aeration system. Using this wort aeration system you can easily achieve much higher oxygen levels by injecting pure o2! Regulator attaches directly to a disposable oxygen tank-NOT INCLUDED(available at most hardware stores) Using a wort aeration system will not only be far more safe than shaking your carboy around but will also contribute to lower final gravities, quicker fermentation, and a cleaner fermentation. Cleaning your aeration system is as easy as putting your air tubing and oxygen diffusion stone in your sanitized solution. Be sure to never handle the diffusion stone with your bare hands as natural skin oils can clog the stone’s pores. This deluxe kit comes with a 22″ long stainless aeration wand with stone, air/02 filter, 4ft of silicone tubing, and a brass valve/regulator to attach to your disposable oxygen tank.”

Oxygenation has made a noticeable difference in my fermentations. Lag times are reduced and fermentation seems more vigorous.

NY Brew Supply O2-REG14-OIS-WAND Oxygenation Kit with Stainless Wand

Compare (different setups from other vendors):

The OxyWand Oxygenation Kit – 0.5 Micron FE391 – via MoreBeer
.5 MICRON OXYGEN AERATION SYSTEM via William’s Brewing

Also: Yeast Starters & Fermentation | StirStarter Stir Plate | Yeast: The Practical Guide to Beer Fermentation

Continue reading →

The OxyWand Oxygenation Kit [Regulator, Threaded Stone & More] – $51.99, Limited Availability + Review & Side by Side Trials

A picture of the OxyWand from our Hands on Review – tank not included

The OxyWand™ Wort Oxygenation Kit – 0.5 Micron by MoreBeer

More Info

From the product description, check product page for current description, price and availability:

Oxygenate your wort like the pros with the OxyWand Oxygenation kit! Insert the oxygenation wand into your fermenter and pump in thousands of microscopic oxygen bubbles for 1-2 minutes to improve the health of your yeast. Healthy yeast produce amazing flavors and have the stamina to completely finish fermentation.

That is not the only reason yeast love the OxyWand™. Yeast hate to compete with bacteria and you hate to drink them. Sintered stainless stones are made of tightly compressed stainless steel powder to create a porous block through which oxygen can flow. This micro maze is also the perfect environment for bacteria to live in after the stone has been used once in wort. That is why we love to boil our stones prior to use. The stone on the OxyWand™ is connected via a 1/4″ flare fitting and can easily be removed and cleaned after use and then boiled before your next brew day.

This OxyWand™ Oxygenation kit comes complete with adjustable brass oxygen regulator, Sanitary air filter, 4 ft of tubing, Instructions, and a 26″ long 0.5 Micron OxyWand™.

The advantage of using compressed oxygen to oxygenate is speed – you can oxygenate your wort in 60 seconds as opposed to 30-120 minutes with aeration. This .5 micron stone can only be used with compressed oxygen because an aeration pump does not supply enough pressure. If you are looking for an Oxywand to use with aeration pumps please see the 2 micron version.

Limited Availability Deal of the Day: As of this posting, this is marked down to $51.99 as a MoreBeer Deal of the Day. Shipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

The OxyWand™ 0.5 Oxygenation KIt .5 Micron FE391

More Fermentation Related!

- Our Fermentation Related Reviews – Fermenters and More
- Yeast Starters and Fermentation Resource Page
- Yeast: The Practical Guide to Beer Fermentation

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

.5 Micron Diffusion Stone – Aeration, Oxygenation, Carbonation + Hands on Review

.5 Micron Diffusion/Carbonating Stone w/ 1/4″ Barb.

From the product description, check product page for current description, price and availability:

Stainless steel 0.5 micron diffusion stone with 1/4in barb
Oxygenate wort thoroughly to insure a healthy fermentation
Carbonate draft beer quickly
For use with compressed CO2, O2 or adequately powered air pumps

Possible homebrewing uses include – carbonating, oxygenating and aerating. Check out my my Hands on Review of this stone.

Carbonating Stone with 1/4″ Barb, 0.5 micron

More Fermentation Related!

- Our Fermentation Related Reviews – Fermenters and More
- Yeast Starters and Fermentation Resource Page
- Yeast: The Practical Guide to Beer Fermentation

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

prod:B0064OKB00

1/2″ NPT Threaded Inline Diffusion Stone – $10.99, Save $9

1/2″ NPT x 3/8″ Barb SS Inline Diffusion Stone.

About via AIH: “This is a great option for putting oxygen in to your wort as you transfer from kettle or plate chiller in to your fermentor. It comes with a 1/2″ NPT and a 3/8″ barb and can be adapted to many configurations with quick disconnects or permanently installed on your system. Overall Length is 2.58″.”

As of this posting, this is on sale for just $10.99. That’s a $9 markdown. Price, promotions and availability can change quickly. Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this this post was published; however, they may differ from those you see when you visit the product page. Check the product page for current price, description and availability

1/2″ NPT x 3/8″ Barb SS Inline Diffusion Stone

More Fermentation Related!

- Our Fermentation Related Reviews – Fermenters and More
- Yeast Starters and Fermentation Resource Page
- Yeast: The Practical Guide to Beer Fermentation

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

aih

Stainless Inline Aeration/Oxygenation Stone and Assembly – oxygenate, aerate your homebrew – $23.99 + Free Shipping

Inline aeration/oxygenation assembly via eBay

More Info

From the product description, check product page for current description, price and availability:

From the offering description: “Just connect your oxygen regulator or aeration pump to the Stainless Steel diffusion stone and aerate your wort as beer flows through the line. All parts are Stainless Steel. It includes 2 micron Stainless diffusion stone, 1/4″ barb x 1/2″ MPT, 1/2″ Stainless Steel tee fitting, (2) Stainless Steel 1/2″ MPT x 1/2″ hose barb fittings.”

Product Details:

Stainless Steel Aeration / Oxygenation Assembly
Connects inline with any Kettle, Pump, or counterflow/plate wort chiller
1/4″ barb inlet for oxygen regulator or air pump connection
Stainless Steel 2 micron diffusion stone
1/2″ Hose barbs for beer flow\

As if this posting, this is eBay offering is selling for just $23.99. Shipping is also free to most US addresses. Prices, shipping and availability can change quickly. Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this this post was published; however, they may differ from those you see when you visit the product page. Check the product page for current price, description and availability.

Inline Aeration/Oxygenation Diffusion Stone (0.5 Micron) Assembly Home Brew

More Fermentation Related!

- Our Fermentation Related Reviews – Fermenters and More
- Yeast Starters and Fermentation Resource Page
- Yeast: The Practical Guide to Beer Fermentation

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

prod:ebayinline

Stainless Steel Inline Oxygenation/Aeration Assembly

Inline Aeration/Oxygenation Diffusion Assembly

From the product description, check product page for current description, price and availability:

Stainless Steel Aeration / Oxygenation Assembly
Connects inline with any Kettle, Pump, or counterflow/plate wort chiller
1/4″ barb inlet for oxygen regulator or air pump connection
Stainless Steel 2 micron diffusion stone
1/2″ Hose barbs for beer flow

HomeBrewStuff Home Beer Brewing Stainless Steel Inline Aeration/Oxygenation Diffusion Stone Assembly for Kettle, Wort Chiller, or Pump

More Fermentation Related!

- Our Fermentation Related Reviews – Fermenters and More
- Yeast Starters and Fermentation Resource Page
- Yeast: The Practical Guide to Beer Fermentation

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

OxiClean Free Versatile Stain Remover Powder, 3 lb

Vacuum Sealer Machine with 55 Count 8"x12" Food Sealers Bags and 8"*79' Vacuum Sealer Roll, Inkbird Automatic Vacuum Sealers Machine with Built-in Cutter, Dry & Moist Sealing Modes for Food Storage

Gamma2 Vittles Vault Airtight Dog Food Storage Container - Fits up to 35 Pounds of Dry Pet Food - Perfect for Cat and Puppy Kibble - BPA-Free Plastic - Made in the USA - 12" L x 16.75" H

FLOTit 2.0 - No Beer Left Behind Floating Dip Tube with Double Filter Inlet (DFI) of 500/300 micron for always clear beer, less beer waste and no clogging. Made in USA.

Meat Thermometer Digital for Grilling and Cooking - ANDAXIN Waterproof Ultra-Fast Instant Read Food thermometers with Backlight & Calibration for Kitchen, Deep Fry, BBQ, Grill(Red/Black), LCD

VEVOR Magnetic Stirrer, 0-2000 RPM Stir Plate with Adjustable Speed Knob, 3000mL Plate Stirrer Kit, Stir Bar Included

adamztop5

1/2″ NPT Thread Stainless Steel Oxygenation/Aeration Diffusion Stone

Ferroday 2 Micron Inline Oxygenation Diffusion Stone Stainless Steel Aeration Stone 1/2 NPT Carbonation Stone With 1/4″ Barb For Home Brewing

More Info

From the product description, check product page for current description, price and availability:

【Food Grade 304 SS Material】 The Whole 2 micron inline diffusion stone(1/4 barb) is made of high quality 304 Stainless Steel,which let our 2 micron inline aeration stone is anti-corrosion & high temperature resistant & Durable
【Connected With Fittings】 1/2″ MPT diffusion stone can be installed into the 1/2″ FPT fitting or 1/4″ diameter for gas line to oxygen your wort & carbonating your beer. The diffusion stone can connect with kettle&pump&wort chiller by hose
【Lower Fermentation Times & Not Easily Get Clogged】 The 2 micron inline carbonation stone have millions of tiny pores ,so that this diffusion stone will quickly oxygenate wort & carbonate beer/soda prior to fermentation
【Detail Attention 】After carbonation, you can shake the beer keg.If do that, you beer can reach the best mouth-feel.Don’t touch the body of diffusion stone by your hands. The oils on your fingers can clog the small pores in the stone
【Boiled to Sanitize & Clean】 The 2 micron inline diffusion stone needs to be boiled in water to sanitize & unclog the pores.If the pores in aeration stone get blocked from handling give a 15 seconds dip in hydrochloric acid before rinsing with water

More Fermentation Related!

- Our Fermentation Related Reviews – Fermenters and More
- Yeast Starters and Fermentation Resource Page
- Yeast: The Practical Guide to Beer Fermentation

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

The OxyWand Oxygenation Kit [Regulator, Threaded Stone & More] – $52.99, Limited Availability + Review & Side by Side Trials

A picture of the OxyWand from our Hands on Review – tank not included

The OxyWand™ Wort Oxygenation Kit – 0.5 Micron by MoreBeer

More Info

From the product description, check product page for current description, price and availability:

This OxyWand™ Oxygenation kit comes complete with adjustable brass oxygen regulator, Sanitary air filter, 4 ft of tubing, Instructions, and a 26″ long 0.5 Micron OxyWand™.

Limited Availability Deal of the Day: As of this posting, this is marked down to $52.99 as a MoreBeer Deal of the Day. Shipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

The OxyWand™ 0.5 Oxygenation KIt .5 Micron FE391

More Fermentation Related!

- Our Fermentation Related Reviews – Fermenters and More
- Yeast Starters and Fermentation Resource Page
- Yeast: The Practical Guide to Beer Fermentation

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

15% Off Oxygen, Aeration and CO2 Purging Equipment at William’s Brewing

As of this posting, William’s Brewing is discounting all oxygenation equipment by 15%. The lineup includes complete systems, oxygen regulators, diffusion stones, filters and more. Note: no coupon code is required, discounted prices will be reflected at checkout. Check William’s for current selection price and availability.

Save 15% on Wort Aeration, Oxygenation and CO2 Purging

Check sale or product page for current availability & pricing

More Fermentation Related!

- Our Fermentation Related Reviews – Fermenters and More
- Yeast Starters and Fermentation Resource Page
- Yeast: The Practical Guide to Beer Fermentation

MoreBeer Oxygenation System – $46.99 + Free Ship Eligible, Limited Availability

Oxygenation Kit via MoreBeer

More Info

From the product description, check product page for current description, price and availability:

This Oxygenation System pumps pure oxygen into your cooled wort using a disposable oxygen tank and stainless steel diffusion stone. Takes a mere 1-2 minutes of operation to achieve adequate oxygen levels. Comes with a regulator for disposable oxygen tank, sterile inline filter, our threaded .5 micron stainless steel oxygenation stone and tubing.

Yeast need oxygen to make good beer. The problem is that after boiling for an hour the wort is void of oxygen. Fermentations with low levels of oxygen will produce yeast that start slower, have sluggish ferments, and are more likely to poop-out and stop fermenting. On the contrary, fermentations that have been infused with oxygen will have healthier yeast that start faster, ferment faster, have a greater tolerance to alcohol, produce beers with less residual sugar, and produce better overall flavors.

Currently, the standard practice of getting oxygen to the yeast is to splash the wort as it enters the fermenter or to shake the fermenter once full. This practice is definitely better than nothing, however it is impossible to infuse enough oxygen by shaking or splashing and the air you do infuse is usually contaminated to some extent.

Please Note: Disposable Oxygen tank is Not Included. These are available at some hardware stores. Each disposable oxygen tank will last for approximately 10-15 five gallon batches.

About the inline filters: There are two sides to the filter – an “in” and an “out”. The direction you use doesn’t matter, however, you want to take note of which way you first push air through it and always keep it that way. There is an arrow on the edge of the filter housing that we use to keep the air flow going one direction when using it. The filter should never get wet, so don’t dunk it in sanitizer. If you want to clean the outside of it, use Alpet D2. To store the filter, use a little tinfoil on the “In” of the filter and store in a zip-lock bag.

Oxygen Regulator Features:

1/4″ Barb Output
Max Delivery Pressure: 100 PSI
Max Flow Rate: 180 CFH
Regulator is Left Hand Thread
Stainless Steel Actuating Rod
Machined brass body with adjusting cap, piston and hose connection

Oxygenation has made a noticeable difference in my fermentations. Lag times are reduced and fermentation seems more vigorous.

This setup gets you an oxygen tank regulator, tubing an inline sterile filter and a .5 micron oxygenation stone. Add an oxygen tank (from your local hardware store) to this and you’re good to go.

Limited Availability Deal of the Day: As of this posting, this is marked down to $46.99 as a MoreBeer Deal of the Day. Shipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

Oxygenation Partial System FE376

More Fermentation Related!

- Our Fermentation Related Reviews – Fermenters and More
- Yeast Starters and Fermentation Resource Page
- Yeast: The Practical Guide to Beer Fermentation

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Stainless Inline Aeration/Oxygenation Stone and Assembly – oxygenate, aerate your homebrew – $23.99 + Free Shipping

Inline aeration/oxygenation assembly via eBay

More Info

From the product description, check product page for current description, price and availability:

Product Details:

Stainless Steel Aeration / Oxygenation Assembly
Connects inline with any Kettle, Pump, or counterflow/plate wort chiller
1/4″ barb inlet for oxygen regulator or air pump connection
Stainless Steel 2 micron diffusion stone
1/2″ Hose barbs for beer flow\

Inline Aeration/Oxygenation Diffusion Stone (0.5 Micron) Assembly Home Brew

More Fermentation Related!

- Our Fermentation Related Reviews – Fermenters and More
- Yeast Starters and Fermentation Resource Page
- Yeast: The Practical Guide to Beer Fermentation

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

prod:ebayinline

The OxyWand Oxygenation Kit [Regulator, Threaded Stone & More] – $51.99, Limited Availability + Review & Side by Side Trials

A picture of the OxyWand from our Hands on Review – tank not included

The OxyWand™ Wort Oxygenation Kit – 0.5 Micron by MoreBeer

More Info

From the product description, check product page for current description, price and availability:

This OxyWand™ Oxygenation kit comes complete with adjustable brass oxygen regulator, Sanitary air filter, 4 ft of tubing, Instructions, and a 26″ long 0.5 Micron OxyWand™.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

The OxyWand™ 0.5 Oxygenation KIt .5 Micron FE391

More Fermentation Related!

- Our Fermentation Related Reviews – Fermenters and More
- Yeast Starters and Fermentation Resource Page
- Yeast: The Practical Guide to Beer Fermentation

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

.5 Micron Diffusion Stone – Aeration, Oxygenation, Carbonation + Hands on Review

.5 Micron Diffusion/Carbonating Stone w/ 1/4″ Barb.

From the product description, check product page for current description, price and availability:

Stainless steel 0.5 micron diffusion stone with 1/4in barb
Oxygenate wort thoroughly to insure a healthy fermentation
Carbonate draft beer quickly
For use with compressed CO2, O2 or adequately powered air pumps

Possible homebrewing uses include – carbonating, oxygenating and aerating. Check out my my Hands on Review of this stone.

Carbonating Stone with 1/4″ Barb, 0.5 micron

More Fermentation Related!

- Our Fermentation Related Reviews – Fermenters and More
- Yeast Starters and Fermentation Resource Page
- Yeast: The Practical Guide to Beer Fermentation

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

prod:B0064OKB00

The OxyWand Oxygenation Kit [Regulator, Threaded Stone & More] – $49.99, Limited Availability + Review & Side by Side Trials

A picture of the OxyWand from our Hands on Review – tank not included

The OxyWand™ Wort Oxygenation Kit – 0.5 Micron by MoreBeer

More Info

From the product description, check product page for current description, price and availability:

This OxyWand™ Oxygenation kit comes complete with adjustable brass oxygen regulator, Sanitary air filter, 4 ft of tubing, Instructions, and a 26″ long 0.5 Micron OxyWand™.

Limited Availability Deal of the Day: As of this posting, this is marked down to $49.99 as a MoreBeer Deal of the Day. Shipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

The OxyWand™ 0.5 Oxygenation KIt .5 Micron FE391

More Fermentation Related!

- Our Fermentation Related Reviews – Fermenters and More
- Yeast Starters and Fermentation Resource Page
- Yeast: The Practical Guide to Beer Fermentation

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Stainless Inline Aeration/Oxygenation Stone and Assembly – oxygenate, aerate your homebrew – $23.99 + Free Shipping

Inline aeration/oxygenation assembly via eBay

More Info

From the product description, check product page for current description, price and availability:

Product Details:

Stainless Steel Aeration / Oxygenation Assembly
Connects inline with any Kettle, Pump, or counterflow/plate wort chiller
1/4″ barb inlet for oxygen regulator or air pump connection
Stainless Steel 2 micron diffusion stone
1/2″ Hose barbs for beer flow\

Inline Aeration/Oxygenation Diffusion Stone (0.5 Micron) Assembly Home Brew

More Fermentation Related!

- Our Fermentation Related Reviews – Fermenters and More
- Yeast Starters and Fermentation Resource Page
- Yeast: The Practical Guide to Beer Fermentation

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

prod:ebayinline

Oxygen System w/Stainless Wand, Tubing and .5 Micron Stone – $54.99

Oxgenation System from William’s Brewing

More Info

From the product description, check product page for current description, price and availability:

Unlike other Oxygen Aeration Systems, which feature imported regulators and wands, all parts are made in U.S.A.

Includes oxygen regulator (made in the US) for use with disposable oxygen bottles (not included, typically found at local hardware stores), tubing, stainless steel wand and .5 micron aeration stone.

This is on sale for a limited time
Shipping is free or reasonably priced flat rate to addresses in the contiguous US depending on your order size for most items.

William’s Oxygen Aeration System

Check sale or product page for current availability & pricing

More Fermentation Related!

- Our Fermentation Related Reviews – Fermenters and More
- Yeast Starters and Fermentation Resource Page
- Yeast: The Practical Guide to Beer Fermentation

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:wmsoxysys

Stainless Inline Aeration/Oxygenation Stone and Assembly – oxygenate, aerate your homebrew – $23.99 + Free Shipping

Inline aeration/oxygenation assembly via eBay

More Info

From the product description, check product page for current description, price and availability:

Product Details:

Stainless Steel Aeration / Oxygenation Assembly
Connects inline with any Kettle, Pump, or counterflow/plate wort chiller
1/4″ barb inlet for oxygen regulator or air pump connection
Stainless Steel 2 micron diffusion stone
1/2″ Hose barbs for beer flow\

Inline Aeration/Oxygenation Diffusion Stone (0.5 Micron) Assembly Home Brew

More Fermentation Related!

- Our Fermentation Related Reviews – Fermenters and More
- Yeast Starters and Fermentation Resource Page
- Yeast: The Practical Guide to Beer Fermentation

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

prod:ebayinline