This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
Motorized Ball Valve- 1/2″ Stainless Steel Ball Valve with Full Port, 9-24V AC/DC and 2 Wire Auto Return Setup by U.S. Solid
More Info
Highlighted Features
SAFE AND RELIABLE- Made of SS304 steel, with NSF certification, this ball valve is safe for drinking water; Lifespan is 80,000-100,000 cycles.
NPT THREADING- ½" Stainless steel threading, manufactured and measured according to National Pipe Thread standards; This electrical ball valve is full port, meaning the bore in the ball is a full ½”; This minimizes pressure loss through the valve; Perfect for home automation projects
9V-24V AC/DC- Works effectively over entire voltage range; Will open or close valve in 3-5 seconds; Limit switch minimizes power after valve is fully open; Ideal for projects where an automatic return is necessary
2 WIRE AUTOMATIC RETURN SETUP- Simple two wire connection, valve largely de-energizes after opening; Returns to fully closed if power is removed
ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed; This reduces likelihood of overheating, making it a great alternative to solenoid valves for projects where a valve needs to be open for an extended period of time
If permanently installed outdoors, it is recommended to place it under a shelter or in a protective box to prevent prolonged exposure to rain.
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
pinned
amazon
Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions. Always use caution with hot liquids.
Diameter 38MM 1.5″ Clamp End Cap fits 1.5″ Tri Clamp Ferrule Flange OD 50.5MM,Stainless Steel 316 Sanitary Fitting (5, 1-1/2 End Cap OD (Ferrule OD 50.5mm))
More Info
Highlighted Features
Stainless Steel SUS SS 316 for resistance to corrosion and high temperatures
Maximum operating pressure rating of 250 psi at 70 degrees F ambient temperature
100% Brand new and high quality,and is suitable for use in food, beverage, and dairy applications
Fits end pipe Diameter 38mm, fits 1.5" Tri-clamp.Ferrule OD:50.5MM,Fits end pipe from Diameter 38mm down to Diameter 19mm
This fitting clamps on to the end of a pipe or tube to close the line, providing a non-permanent seal that provides take down access
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
From HBF: Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions.
9/4 7:30 AM Central: These are selling for just $7.99. Shipping is also free to many US addresses with Prime Membership [Try Prime for Free] or a qualifying order. Prices and availability can change quickly. Check product page for current info – More About Prices
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
9/17 5 AM Central: This is selling for $8.99. Shipping is also free to many US addresses. Prices and availability can change quickly. Check product page for current info – More About Prices
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
From HBF: Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions.
CIP (Clean in Place) Spray Balls are generally used for vessels that are too large to move. Since they’re too large to move you… clean them in place. If you have a larger setup, you could incorporate these into your system or routine to help clean your vessels more easily.
Other possible homebrew applications: A CIP ball could be as part of a recirculating or sparging setup or as part of a keg or carboy cleaning setup. I use a (different model) rotary spray ball with my Mark II Keg and Carboy Cleaner. See: Mark II Keg and Carboy Washer Mod – SS CIP Spray Ball. Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions.
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
KegLand Quick Swivel Connectors feature ½” straight threads, and are perfect for connecting your pump, valve, or wort chiller. The stainless nuts feature rubber surrounds to eliminate the need for tools, and the male barb fittings are available in everything from 6.5mm Duotight, to ½” hose barb. Connect your system with the most versatile quality fittings available.
For a limited time William’s Brewing has these marked down 20% as part of a short introductory sale
This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
Motorized Ball Valve- 1/2″ Stainless Steel Ball Valve with Full Port, 9-24V AC/DC and 2 Wire Auto Return Setup by U.S. Solid
More Info
Highlighted Features
SAFE AND RELIABLE- Made of SS304 steel, with NSF certification, this ball valve is safe for drinking water; Lifespan is 80,000-100,000 cycles.
NPT THREADING- ½" Stainless steel threading, manufactured and measured according to National Pipe Thread standards; This electrical ball valve is full port, meaning the bore in the ball is a full ½”; This minimizes pressure loss through the valve; Perfect for home automation projects
9V-24V AC/DC- Works effectively over entire voltage range; Will open or close valve in 3-5 seconds; Limit switch minimizes power after valve is fully open; Ideal for projects where an automatic return is necessary
2 WIRE AUTOMATIC RETURN SETUP- Simple two wire connection, valve largely de-energizes after opening; Returns to fully closed if power is removed
ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed; This reduces likelihood of overheating, making it a great alternative to solenoid valves for projects where a valve needs to be open for an extended period of time
If permanently installed outdoors, it is recommended to place it under a shelter or in a protective box to prevent prolonged exposure to rain.
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
pinned
amazon
Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions. Always use caution with hot liquids.
CO-Z Large HSS Spiral Groove Step Drill Bit, 12 Sizes Titanium High Speed Steel 1/4″ to 2-3/8″
More Info
Highlighted Features
Durable Titanium Coated Bits ----- The step drill bit is made from upgraded high speed steel characterized by well-balanced toughness, wear resistance and red hardness properties for better and faster hole -drilling performance. The titanium coating makes the drill bit more durable so that it can last for years with uncompromised quality.
Jam-Free Performance ----- The dual-flute design prevents metal fillings from flying around and clears chips faster thus it can drill more smoothly without heating up.
Universal Compatibility ----- The rapid strike tip drills twice as fast as the average step drills and can drill acrylic, PVC, wood, aluminum and iron sheets up to 0.2’’ in thickness.
Larger Size ----- Our drill bit is bigger in size so it can drill holes with larger dimensions.
One Bit for All ----- The bit comes with 12 hole sizes: 6mm, 10mm, 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm. , saving you time and efforts to change bits, quadrupling your drilling efficiency compared to competition.
From HBF: Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions.
Possible Uses: Drill a hole in your kettle based brew kettle, mlt or hlt so that you can add a weldless bulkhead, ball valve or thermometer.
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
…. and more – wort chillers, site glasses, pickup tubes, false bottoms and more
Generally Great Prices: ProFlow already has generally great prices. Some of the best everyday prices for fittings, QDs, ball locks & more
30% Off Coupon! PFD is discounting their homebrew category by a whopping 30% when you use promo code BF30%. Considering their already, generally, great everyday prices, this is an outstanding deal!
This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
greatdeals
Price, promotions and availability can change quickly. Check the product page for current price, description and availability. pst:pfdcam
Tank Cleaning Ball,Tank Cleaning Head 1Pc 1/2″Bsp Thread Female Stainless Steel Sanitary Fix/Rotarys Spray Ball Tank Cleaning Ball
More Info
From HBF: Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions.
CIP (Clean in Place) Spray Balls are generally used for vessels that are too large to move. Since they’re too large to move you… clean them in place. If you have a larger setup, you could incorporate these into your system or routine to help clean your vessels more easily.
Other possible homebrew applications: A CIP ball could be as part of a recirculating or sparging setup or as part of a keg or carboy cleaning setup. I use a (different model) rotary spray ball with my Mark II Keg and Carboy Cleaner. See: Mark II Keg and Carboy Washer Mod – SS CIP Spray Ball. Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions.
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
Tank Cleaning Ball,Tank Cleaning Head 1Pc 1/2″Bsp Thread Female Stainless Steel Sanitary Fix/Rotarys Spray Ball Tank Cleaning Ball
More Info
From HBF: Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions.
CIP (Clean in Place) Spray Balls are generally used for vessels that are too large to move. Since they’re too large to move you… clean them in place. If you have a larger setup, you could incorporate these into your system or routine to help clean your vessels more easily.
Other possible homebrew applications: A CIP ball could be as part of a recirculating or sparging setup or as part of a keg or carboy cleaning setup. I use a (different model) rotary spray ball with my Mark II Keg and Carboy Cleaner. See: Mark II Keg and Carboy Washer Mod – SS CIP Spray Ball. Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions.
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
CIP (Clean in Place) Spray Balls are generally used for vessels that are too large to move. Since they’re too large to move you… clean them in place. If you have a larger setup, you could incorporate these into your system or routine to help clean your vessels more easily.
There are a couple of main styles of CIP spray balls stationary and rotary. Note that if you’re going to try and use this for sparging, you may want to use the fixed spray version as Sam did. You’re probably not going to get enough pressure with gravity alone to turn the rotary version.
From the product description, check product page for current description, price and availability:
The Duotight Bottle Filler is designed for a seamless beer dispensing experience, minimizing oxygen exposure during bottling. This device is equipped with two triggers; one for oxygen purging and another for beer dispensation. It is versatile enough to accommodate various bottle sizes and can also be used for wine or direct glass dispensing, meeting a wide range of needs.
Constructed to integrate seamlessly with Duotight hardware, this bottle filler simplifies the bottling process. Duotight fittings ensure reliable connections by simply pushing the tubing into place. Each fitting includes dual EPDM o-rings, doubling the sealing surface to enhance seal quality and reduce leakage risks.
For best results, ensure the tubing is cut straight rather than at an angle to maintain an effective seal. The filler’s components that come into contact with beer are crafted from stainless steel or silicone, ensuring durability and safety.
Please note that this product should not be cleaned with chemicals.
Included in the package are:
– Duotight Bottle Filler Beer Gun
– Duotight (Push-In) Ball Lock Liquid Disconnect – 5/16″ (8mm)
– Duotight Plastic Carbonation Ball Lock Cap – 1/4″ (6.35mm)
– Duotight Food Grade Plastic (Push-In) 90° Compression Reducer Elbow – 1/4″ (6.35mm) X 5/16″ (8mm)
– Duotight Food Grade Plastic (Push-In) Fitting – 1/4″ Male NPT X 1/4″ (6.35mm)
– Polyethylene Tubing – 5/32″ ID (4mm) X 5/16″ OD (8mm), 6 feet
Specifications:
– Material: Stainless Steel, Silicone, Duotight Food Grade Plastic
– Tubing Compatibility: 5/32″ ID (4mm) X 5/16″ OD (8mm)
– Fittings: Dual EPDM O-rings for enhanced sealing
– Cleaning: Avoid chemical cleaners
– Includes various fittings and accessories for immediate setup
This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
1.5″ Tri Clamp to 3/4″ Barb Fitting Stainless Sanitary Home Brew Adapter (Ferrule OD 50.5mm)
More Info
Highlighted Features
【Material】Stainless Steel 304, Internal and External Polished. 100% suitable for sanitary purpose, seamless construction for smoother interior flow and greater burst strength.
【Size】Suitable for 3/4" Inner Diameter silicone, rubber, plastic, TPU, or other hose.
【Ferrule Size】50.5mm OD Ferrule. Suitable for 1.5" Tri Clamp / Clover / Sanitary.
【Application】Apply for food and beverage, manufacturing, medical industries, chemical processing, aerospace and automotive.
【Quantity】Package including 1pcs tri-clamp fitting and 1pcs silicone gasket.
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
From the product description, check product page for current description, price and availability:
Our best-selling BrewBuilt kettles, now available with 1.5″ Tri-Clamp fittings!
T.C. (or Tri-Clover) fittings are the gold standard in professional breweries, and they’re gaining ground in the homebrewing world. The main benefit of T.C. fittings is that they’re generally threadless, which makes them very easy to keep clean and sanitary. These kettles do not include a valve or other fittings, so be sure to check out the “You Might Also Need” section below to add your desired fittings and accessories.
Designed for Brewing. Built to Last. BrewBuilt brew kettles, made from 304 stainless steel, offer an unparalleled mix of features for their price range. At the very top of the list are two welded-in-place T.C. fittings that offer a lifetime of leak-free use. As you can imagine, welding in a coupler costs more than punching a hole and using a gasketed (i.e. weld-less) fitting. Welded fittings offer a permanent connection that, in our opinion, is worth every penny. The second unique feature that we absolutely love about these brew kettles is the notched lid with silicone plug. This notch allows you so much flexibility; you can use an immersion chiller, one of our Ultimate Sparge Arms (BE950) for mashing, tie off hop bags, take a temp reading during cooling, or whatever else we all can dream up.
This Brew Kettle has a lot to offer…
Some other features we dig include the internal volume markers from the bottom to the top – so handy for instant reads. The silicone sleeved handles on the kettle and the lid are a cool feature to protect your hands. The tri-clad bottom with a 4mm core of aluminum sandwiched between two layers of stainless steel offers even heat distribution during the boil and also makes it a perfect choice for anyone wanting to use an induction burner.
Beefy 304 Stainless
These kettles are made from 304 grade stainless. That means you will have less corrosion issues than with a kettle made from lower grade 201 type stainless. We put these kettles through a corrosive salt water test in the MoreBeer! shop and they passed with flying colors. We also made sure the rivets and riveted handles were also made of stainless steel for a long term, trouble free life. The 10 and 15 gallon size are made from 1.0mm thick stainless steel. The 22, 31, and 50 gallon size are made with 1.2mm stainless – that’s pretty thick stuff – and you will know it when you pick one up.
Size Ratios and stuff
All the BrewBuilt kettles follow the recent trend to a 1.2:1 ratio where the height is 1.2 times the diameter. This is a proven commercial ratio that has been adopted in homebrewing to achieve a more consistent 10% evaporation rate during the boil. We do like this ratio for boiling. For Mashing we would prefer a little bit shallower but that is a small compromise. Dimensions for a hot-liquor tank, if you are thinking brewing system down the road, are irrelevant as any ratio kettle will do.
Unique 22 Gallon Size
This size was born from customer feedback. Many customers making 10 gallons actually want to end up with 10 gallons at the end of kegging. That means you can be starting a boil with 13-14 gallons of wort to account for boil off, kettle loss, and fermenter loss. The 22 Gallon size kettle allows you to boil those quantities with plenty of room for boil overs. Want to make a 15 gallon batch with friends… you can squeeze that in to! You’ll never regret having a little extra kettle.
Final Words
With welded fittings, a bunch of cool features, and a solid, thick 304 stainless steel core this kettle is a pretty amazing value. Remember, if you order BrewBuilt kettle from MoreBeer! we ship free anywhere in the continental USA!
10, 15, 20 and 30 gallon sizes are available.
For a limited time MoreBeer has all sizes marked down a whopping 30%.
+ Stacking 20% Off Coupon! Coupon code BBKETTLE4ME takes another 20% off!
All sizes ship for free to addresses in the contiguous US.
The stacking deals add up to a whopping 40% discount!
This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
morebeer
Price, promotions and availability can change quickly. Check the product page for current price, description and availability. 11.17.19 tag:watchan Announcing: BrewBuilt Brewing Kettles with Tri-Clamp Fittings
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
From the product description, check product page for current description, price and availability:
Our best-selling BrewBuilt kettles, now available with 1.5″ Tri-Clamp fittings!
T.C. (or Tri-Clover) fittings are the gold standard in professional breweries, and they’re gaining ground in the homebrewing world. The main benefit of T.C. fittings is that they’re generally threadless, which makes them very easy to keep clean and sanitary. These kettles do not include a valve or other fittings, so be sure to check out the “You Might Also Need” section below to add your desired fittings and accessories.
Designed for Brewing. Built to Last. BrewBuilt brew kettles, made from 304 stainless steel, offer an unparalleled mix of features for their price range. At the very top of the list are two welded-in-place T.C. fittings that offer a lifetime of leak-free use. As you can imagine, welding in a coupler costs more than punching a hole and using a gasketed (i.e. weld-less) fitting. Welded fittings offer a permanent connection that, in our opinion, is worth every penny. The second unique feature that we absolutely love about these brew kettles is the notched lid with silicone plug. This notch allows you so much flexibility; you can use an immersion chiller, one of our Ultimate Sparge Arms (BE950) for mashing, tie off hop bags, take a temp reading during cooling, or whatever else we all can dream up.
This Brew Kettle has a lot to offer…
Some other features we dig include the internal volume markers from the bottom to the top – so handy for instant reads. The silicone sleeved handles on the kettle and the lid are a cool feature to protect your hands. The tri-clad bottom with a 4mm core of aluminum sandwiched between two layers of stainless steel offers even heat distribution during the boil and also makes it a perfect choice for anyone wanting to use an induction burner.
Beefy 304 Stainless
These kettles are made from 304 grade stainless. That means you will have less corrosion issues than with a kettle made from lower grade 201 type stainless. We put these kettles through a corrosive salt water test in the MoreBeer! shop and they passed with flying colors. We also made sure the rivets and riveted handles were also made of stainless steel for a long term, trouble free life. The 10 and 15 gallon size are made from 1.0mm thick stainless steel. The 22, 31, and 50 gallon size are made with 1.2mm stainless – that’s pretty thick stuff – and you will know it when you pick one up.
Size Ratios and stuff
All the BrewBuilt kettles follow the recent trend to a 1.2:1 ratio where the height is 1.2 times the diameter. This is a proven commercial ratio that has been adopted in homebrewing to achieve a more consistent 10% evaporation rate during the boil. We do like this ratio for boiling. For Mashing we would prefer a little bit shallower but that is a small compromise. Dimensions for a hot-liquor tank, if you are thinking brewing system down the road, are irrelevant as any ratio kettle will do.
Unique 22 Gallon Size
This size was born from customer feedback. Many customers making 10 gallons actually want to end up with 10 gallons at the end of kegging. That means you can be starting a boil with 13-14 gallons of wort to account for boil off, kettle loss, and fermenter loss. The 22 Gallon size kettle allows you to boil those quantities with plenty of room for boil overs. Want to make a 15 gallon batch with friends… you can squeeze that in to! You’ll never regret having a little extra kettle.
Final Words
With welded fittings, a bunch of cool features, and a solid, thick 304 stainless steel core this kettle is a pretty amazing value. Remember, if you order BrewBuilt kettle from MoreBeer! we ship free anywhere in the continental USA!
10, 15, 20 and 30 gallon sizes are available.
For a limited time MoreBeer has all sizes marked down a whopping 30%.
+ Stacking 20% Off Coupon! Coupon code BBKETTLE4ME takes another 20% off!
All sizes ship for free to addresses in the contiguous US.
The stacking deals add up to a whopping 40% discount!
This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
morebeer
Price, promotions and availability can change quickly. Check the product page for current price, description and availability.
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
pinned
amazon
Price, promotions and availability can change quickly. Check the product page for current price, description and availability.
What are Other’s Saying? Search this product’s Amazon reviews for “brew” – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
