From the product description, check product page for current description, price and availability:

These 16 gram cartridges fits our Micro Regulators and most Cartridge Injectors that use 16 gram cartridges. Filled with pure CO2 suitable for beer use, they also fit most bicycle pump type injectors that take 16 gram threaded cartridges. These are 3.25″ long, .732″ diameter, with a neck threading of 3/8-24. These also fit the simple ‘bicycle type’ inflators that use 16 gram unthreaded cartridges. Does not fit the Core 360 Regulator. Box of 10.

Product of Hungary.

RESTRICTED SHIPPING- Ground shipment only, air shipment not allowed.

From the product description, check product page for current description, price and availability:

Perfect heating solution for those who want even coverage and certainty that their PET fermenter will not melt even if the fermenter is empty. Features Velcro straps to hold the blanket firmly in place. Ultra low density 30 watt element is spread out along the entire length and width of the heating belt, preventing hot spots and providing even low density heat.

Using 30 watts, this heating wrap belt is great when paired with insulation and a thermostat like our item P40 RAPT Temperature Controller or item Q91 KegLand MKII Dual Plug Control. Plugs into any 110 volt outlet. Fits all KegLand Fermzilla models, as well as carboys and plastic bucket style fermenters.

39″ long, 9¾” tall.

From the product description, check product page for current description, price and availability:

Do you want to keep it simple and just get a commercial keg of beer and dispense? This kit converts any Sankey coupler to an air pump beer dispenser. Keep in mind if you pump a keg with air, the beer will oxidize if left for more than a couple days, so this tap should be used for parties only.

Does not include needed Sankey Coupler, virtually any brand Sankey coupler will work.

From the product description, check product page for current description, price and availability:

Do you having a kegging system with beer faucet, and want to bottle kegged beer? The Nukatap Counter Pressure Bottle Filler is an easy way to fill bottles directly from your beer faucet while preserving carbonation in the bottle. The O ring sealed beer inlet nipple press fits into any beer faucet with 10.0 mm inner diameter spout/nozzle including Nukatap, Intertap, Perlick Forward Seal, and Ventmatic faucets.

For the gas inlet side, a male ball lock fitting is provided, so you can use any ball lock gas connector to attach the C02 purging gas. This gas should be at the same pressure as your kegerator dispensing gas, and should be connected to your kegerator C02 regulator. Not Included: you will need a spare gas line from your regulator kegging system with a female ball lock on it to connect your purging C02 gas.

The integrated counter pressure relief valve gives you control of the counter pressure and thus the filling speed. How fast the bottle can be filled without too much foaming depends on CO2 level, beer temperature and bottle temperature. Keep everything cold for the best results.

Fits all 16 ounce and 32 ounce ‘Grolsch’ style swing top bottles.