From the product description, check product page for current description, price and availability:

Do you want to keep it simple and just get a commercial keg of beer and dispense? This kit converts any Sankey coupler to an air pump beer dispenser. Keep in mind if you pump a keg with air, the beer will oxidize if left for more than a couple days, so this tap should be used for parties only.

Does not include needed Sankey Coupler, virtually any brand Sankey coupler will work.

From the product description, check product page for current description, price and availability:

This type 304 stainless false bottom has been designed to perfectly fit the G30 Grainfather. Includes pictured lifting ring. 11 5/8″ overall diameter (290mm), and the 3 legs are 1 1/2″ high, or 35mm

From the product description, check product page for current description, price and availability:

This brass fitting will convert your C02 tank valve into a valve with a permanent sealing O ring. No more need to buy fiber or plastic tank sealing washers.

Installs in any CGA-320 C02 valve that has female threads in the center of the outlet. Use a 5/32″ hex key to screw this in.

Important: Before ordering, check to see if the C02 valve’s outlet hole on your cylinder has female threads. If it does this will work, if the hole is smooth without threads, this will not fit.

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

From the product description, check product page for current description, price and availability:

Do you having a kegging system with beer faucet, and want to bottle kegged beer? The Nukatap Counter Pressure Bottle Filler is an easy way to fill bottles directly from your beer faucet while preserving carbonation in the bottle. The O ring sealed beer inlet nipple press fits into any beer faucet with 10.0 mm inner diameter spout/nozzle including Nukatap, Intertap, Perlick Forward Seal, and Ventmatic faucets.

For the gas inlet side, a male ball lock fitting is provided, so you can use any ball lock gas connector to attach the C02 purging gas. This gas should be at the same pressure as your kegerator dispensing gas, and should be connected to your kegerator C02 regulator. Not Included: you will need a spare gas line from your regulator kegging system with a female ball lock on it to connect your purging C02 gas.

The integrated counter pressure relief valve gives you control of the counter pressure and thus the filling speed. How fast the bottle can be filled without too much foaming depends on CO2 level, beer temperature and bottle temperature. Keep everything cold for the best results.

Fits all 16 ounce and 32 ounce ‘Grolsch’ style swing top bottles.

From the product description, check product page for current description, price and availability:

This molded male ball lock valve coupling cap that fits a 2 liter or smaller plastic soda bottle with a 28mm screw cap lid. This allows the 2 liter bottle to be charged with C02 from any female ball lock gas fitting (like our item D32 or D03 Gas Connector), carbonating the cold beverage in the bottle. Great for serving draft beer away from the keg. Also fits the Brewzilla in and out ports on the lid, and the Brewzilla Collection Jar ports for pressurizing the Brewzilla fermenter. The hose barb on the bottom is also compatible with our DuoTight fitting Z84 and C55 which lets you easily attach a ball lock fitting to an EvaBarrier 8mm or 9mm outer diameter line.

This has a hybrid ball lock post that will accept beer and gas lines.

IMPORTANT SAFETY WARNING: FOR USE ON PLASTIC SODA BOTTLES AND BREWZILLA ONLY, NEVER USE ON GLASS BOTTLES

From the product description, check product page for current description, price and availability:

Make a ball lock keg out out of PET plastic bottles. Great for taking beer to a party or making your own mini keg system with a 2 liter soda bottle.

This tee piece enables you to attach both a liquid and gas ball lock disconnect to the bottle at the same time so you can essencially use a common PET bottle as a keg. Very handy with a two liter soda bottle, as you can get a short length of ¼” interior diameter silicone tubing, attach it to the top Carbonation Cap (not included), fill with beer, and put in the refrigerator, either upright or sideways.

Or if you have Nukatap or Intertap faucets on your draft system, make a draft system cleaner – fill a soda bottle with beer line cleaner, attach an optional ball lock adapter to the end of your Intertap/Nukatap Faucet, and open the faucet to force cleanser into your draft beer system and down the lines.

Note: This is for the tee piece only. You need a soda bottle with standard PCO 1881 thread, 2 item C35 Carbonation Caps, and some ¼” interior diameter tubing to complete your soda bottle keg conversion.

From the product description, check product page for current description, price and availability:

Do you want to keep it simple and just get a commercial keg of beer and dispense? This kit converts any Sankey coupler to an air pump beer dispenser. Keep in mind if you pump a keg with air, the beer will oxidize if left for more than a couple days, so this tap should be used for parties only.

Does not include needed Sankey Coupler, virtually any brand Sankey coupler will work.

From the product description, check product page for current description, price and availability:

This type 304 stainless false bottom has been designed to perfectly fit the G30 Grainfather. Includes pictured lifting ring. 11 5/8″ overall diameter (290mm), and the 3 legs are 1 1/2″ high, or 35mm

From the product description, check product page for current description, price and availability:

This brass fitting will convert your C02 tank valve into a valve with a permanent sealing O ring. No more need to buy fiber or plastic tank sealing washers.

Installs in any CGA-320 C02 valve that has female threads in the center of the outlet. Use a 5/32″ hex key to screw this in.

Important: Before ordering, check to see if the C02 valve’s outlet hole on your cylinder has female threads. If it does this will work, if the hole is smooth without threads, this will not fit.

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

From the product description, check product page for current description, price and availability:

Do you having a kegging system with beer faucet, and want to bottle kegged beer? The Nukatap Counter Pressure Bottle Filler is an easy way to fill bottles directly from your beer faucet while preserving carbonation in the bottle. The O ring sealed beer inlet nipple press fits into any beer faucet with 10.0 mm inner diameter spout/nozzle including Nukatap, Intertap, Perlick Forward Seal, and Ventmatic faucets.

For the gas inlet side, a male ball lock fitting is provided, so you can use any ball lock gas connector to attach the C02 purging gas. This gas should be at the same pressure as your kegerator dispensing gas, and should be connected to your kegerator C02 regulator. Not Included: you will need a spare gas line from your regulator kegging system with a female ball lock on it to connect your purging C02 gas.

The integrated counter pressure relief valve gives you control of the counter pressure and thus the filling speed. How fast the bottle can be filled without too much foaming depends on CO2 level, beer temperature and bottle temperature. Keep everything cold for the best results.

Fits all 16 ounce and 32 ounce ‘Grolsch’ style swing top bottles.

From the product description, check product page for current description, price and availability:

This molded male ball lock valve coupling cap that fits a 2 liter or smaller plastic soda bottle with a 28mm screw cap lid. This allows the 2 liter bottle to be charged with C02 from any female ball lock gas fitting (like our item D32 or D03 Gas Connector), carbonating the cold beverage in the bottle. Great for serving draft beer away from the keg. Also fits the Brewzilla in and out ports on the lid, and the Brewzilla Collection Jar ports for pressurizing the Brewzilla fermenter. The hose barb on the bottom is also compatible with our DuoTight fitting Z84 and C55 which lets you easily attach a ball lock fitting to an EvaBarrier 8mm or 9mm outer diameter line.

This has a hybrid ball lock post that will accept beer and gas lines.

IMPORTANT SAFETY WARNING: FOR USE ON PLASTIC SODA BOTTLES AND BREWZILLA ONLY, NEVER USE ON GLASS BOTTLES

From the product description, check product page for current description, price and availability:

Make a ball lock keg out out of PET plastic bottles. Great for taking beer to a party or making your own mini keg system with a 2 liter soda bottle.

This tee piece enables you to attach both a liquid and gas ball lock disconnect to the bottle at the same time so you can essencially use a common PET bottle as a keg. Very handy with a two liter soda bottle, as you can get a short length of ¼” interior diameter silicone tubing, attach it to the top Carbonation Cap (not included), fill with beer, and put in the refrigerator, either upright or sideways.

Or if you have Nukatap or Intertap faucets on your draft system, make a draft system cleaner – fill a soda bottle with beer line cleaner, attach an optional ball lock adapter to the end of your Intertap/Nukatap Faucet, and open the faucet to force cleanser into your draft beer system and down the lines.

Note: This is for the tee piece only. You need a soda bottle with standard PCO 1881 thread, 2 item C35 Carbonation Caps, and some ¼” interior diameter tubing to complete your soda bottle keg conversion.