This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
13.2 Gallon Stainless Steel Kegmenter via William’s Brewing. Ferment and transfer under pressure or ferment and serve directly from the Kegmenter.
More Info
From the product description, check product page for current description, price and availability:
The Kegmenter is a 13.2 gallon 304 stainless keg with a 4” diameter tri clover lid on the top. Ball lock fittings with dip tubes are built into the lid so you can use this as either a large ball lock keg or a 10 gallon fermenter. The beer dip tube features a silicone hose and floating pick up ball, to collect the clearest beer from the top of the keg.
The Kegmenter features a 50 PSI rating (with relief valve) so it can be used as a keg or as a pressurized fermenter if desired. The 4” diameter lid makes it easy to clean out, and adds the ability to add dry hops and other additives either during a ferment or after kegging.
The ability to hold up to 50 PSI also means the Kegmenter can be used with an adjustable pressure relief valve (see item P84 below) to naturally carbonate in the keg, or to push beer out when the ferment is done with C02, either into smaller kegs, a filter, or even dispense from the fermenter if desired. 23” tall, 17” wide.
For a short time William’s Brewing has this on sale for $212.49.
This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
FermZilla Gen 3.2 27 Liter Tri Conical Fermenter via William’s Brewing
More Info
From the product description, check product page for current description, price and availability:
The Gen 3.2 FermZilla Tri Conical features a 3” Tri-Clamp fitting to attach the dump valve, and a 2” Tri-Clamp fitting to attach the improved 3.2 yeast collection vessel. This makes it easy to disassemble the fermenter for cleaning, and to remove and reattach the yeast collection vessel.
The FermZilla can be used in many ways -use it as a basic gravity fermenter with the ability to dump and harvest yeast, or as a pressure fermenter and or keg with optional Spunding Valve part C71 and Pressure Kit part C77, as a chilled fermenter with an optional Temp Twister and Cooling Kit, and even as a Hop Bong Pressure Kit, with the ability to add dry hops without adding oxygen.
Includes a lid with 35 PSI PRV valve, stainless stand, airlock, 600 ml collection container with 3″ Tri Clamp lid, and Tri Clamp fittings to assemble and use the fermenter. Overall height with airlock is 34″, with a width of 14″.
William’s Brewing has this on sale for just $127.99
This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:lnksfxd tag:wmsbuyageta rpu:wmsfermzilla:rpu
From the product description, check product page for current description, price and availability:
The KegLand Stainless Steel Mini Beer Kegs are specifically designed for home brewing/growler dispensing. They are suited to small batches and suited to people who want to fit them into their home refrigerators. You can naturally carbonate using priming sugars or force carbonate and serve your beer with the optional ball lock lid (item P07, see at right). They come with a silicone gasket sealed stainless threaded lid, so you can fill them with beer and let them naturally carbonate, or carbonate as needed with the optional P07 ball lock lid. You will be given a chance to buy this lid (you do not need a Ball Lock Lid for every keg) when you put this in your cart.
These fit into a standard domestic refrigerator. The optional Ball Lock lid for these kegs use a flexible silicone dip tube the kegs can also be dispensed on their side or upright. The flexible silicone dip tube of lid P07 is heavier than beer, and will sink to the bottom even if the kegs are on their side. Kegs are equipped with a 30 PSI relief valve, and have a maximum pressure of 45 PSI.
Kegland Mini Kegs use the gold standard acid bath electrolosis to pacify the 304 grade stainless steel making the more resistant to rust than any other mini keg on the market. These are the only mini keg that uses a special robotic technique to weld the kegs from the inside out. This means KegLand gets a superior welding finish that is more sanitary than any other mini keg available. Although there are many other mini kegs that come from China simply none have the quality and finish as the genuine KegLand minikegs.
William’s Brewing is discounting the entire lineup of Kegland Mini Kegs and Accessories by 15%. No coupon code is required.
This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
From the product description, check product page for current description, price and availability:
The Kegmenter is a 7.6 gallon (29 liter) 304 stainless keg with a 4” diameter tri clover lid on the top. Ball lock fittings with dip tubes are built into the lid so you can use this as either a large ball lock keg or a 10 gallon fermenter. The beer dip tube features a silicone hose and floating pick up ball, to collect the clearest beer from the top of the keg.
The Kegmenter features a 50 PSI rating (with an included lid red relief valve set at 35 PSI) so it can be used as a keg or as a pressurized fermenter if desired. The 4” diameter lid makes it easy to clean out, and adds the ability to add dry hops and other additives either during a ferment or after kegging. The relief valve is standard Corny style, and can be swapped with other corny compatible valve with different pressure ratings.
Convert a Kegmenter into a 6 gallon capacity flame fired or electric distilling unit with the optional 4″ Tri-Clover Adapter (item Z49), 2″ Tri-Clover Clamp (item Z57) and Kegland Pot Still Condenser (item B78). To make the Kegmenter electric, drill a 32mm hole near the bottom and install our 1600 Watt Heating Element, item X97.
The ability to hold up to 50 PSI also means the Kegmenter can be used with an adjustable pressure relief valve to naturally carbonate in the keg, or to push beer out when the ferment is done with C02, either into smaller kegs, a filter, or even dispense from the fermenter if desired. 15.5” tall, 15.5” wide.
Note: The Kegmenter we sell includes the upgraded Ball Lock Post Lid with floating beer pick up tube, and does not come with the flat lid pictured in the first part of the video. It can be used right out of the box as a ball lock keg,
This is on sale for $195.40.
No coupon code is required.
Shipping is free or reasonably priced flat rate to addresses in the contiguous US depending on your order size for most items.
This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
FermZilla Gen 3.2 27 Liter Tri Conical Complete Package via William’s Brewing
More Info
From the product description, check product page for current description, price and availability:
• Includes Pressure Kit with Floating Pick Up Tube
• Includes Spundling Valve so you can do pressurized ferments
The Gen 3.2 FermZilla Tri Conical features a 3” Tri-Clamp fitting to attach the dump valve, and a 3” Tri-Clamp fitting to attach the improved 3.2 yeast collection vessel. This makes it easy to disassemble the fermenter for cleaning, and to remove and reattach the yeast collection vessel.
The FermZilla can be used in many ways -use it as a basic gravity fermenter with the ability to dump and harvest yeast, or as a pressure fermenter and or keg with the included Spunding Valve part C71 and Pressure Kit part C77, as a chilled fermenter with an optional Temp Twister and Cooling Kit, and even as a Hop Bong Pressure Kit, with the ability to add dry hops without adding oxygen.
Includes a lid with 35 PSI PRV valve, stainless stand, airlock, 600 ml collection container with 3″ Tri Clamp lid, and Tri Clamp fittings to assemble and use the fermenter. This complete package also includes Spunding Valve (item C71) and Pressure Kit (item C77). Overall height with airlock is 34″, with a width of 14″.
William’s Brewing has this combo on sale for $159.99
This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
William’s Brewing has reformulated their popular lineup of extract kits with extract that has been preboiled for 15 minutes. That enables them to shorten the boil from 1 hour to 30 minutes without compromising flavor
Buy two or more William’s Brewing Homebrew Kits (mix and match is okay) and save 15%
Need a good deal on an excellent base malt? We made a special buy on North Star Pils from Rahr Malting. 10% on 10 pound bags, and 14% on 55 lb sacks, while supplies last.
10 lbs are on sale for $17.99 and qualify for flat rate or free shipping
55 lb sacks are on sale for $59.99 + actual shipping charges
William’s Brewing Thermoplastic High Temp Tubing Tubing, 1/2″ ID – from… 89 cents per ft!
This Thermoplastic tubing can withstand temperatures of 275 degrees F., and is food grade. Ideal for piping wort into wort chillers by gravity, although not recommended for pump applications (see our thicker wall tubing L69). This tubing is 1/2″ in interior diameter, and 5/8″ in interior diameter (1/16″ wall). This is the tubing in the middle of the above picture.
Sold per foot, when you enter a quantity of 5, for example, you will get one five foot length. Maximum continuous length is 50′ feet, for example, if you order a quantity of 55, you will get one 50′ roll and one 5′ section.
As of this posting, this is on sale for $1.19 per ft.
Save 25% if you purchase 50 feet or more. That means 50+ ft comes out to just 89 cents per ft. That’s a bargain!
From the product description, check product page for current description, price and availability:
Do you want to keep it simple and just get a commercial keg of beer and dispense? This kit converts any Sankey coupler to an air pump beer dispenser. Keep in mind if you pump a keg with air, the beer will oxidize if left for more than a couple days, so this tap should be used for parties only.
Does not include needed Sankey Coupler, virtually any brand Sankey coupler will work.
As of this posting, William’s Brewing has this on sale for just $23.49.
Because of the real potential for oxygenation I wouldn’t recommend this for a long term (or even mid term solution). To me, these make sense when you’re confident your get-together will go through an entire keg.
44% Off Stainless Steel False Bottom Upgrade for Grainfather
Grainfather False Bottom
More Info
From the product description, check product page for current description, price and availability:
This type 304 stainless false bottom has been designed to perfectly fit the G30 Grainfather. Includes pictured lifting ring. 11 5/8″ overall diameter (290mm), and the 3 legs are 1 1/2″ high, or 35mm
As of this posting this is on sale for just $16.99. That’s a whopping 44% off.
From the product description, check product page for current description, price and availability:
This brass fitting will convert your C02 tank valve into a valve with a permanent sealing O ring. No more need to buy fiber or plastic tank sealing washers.
Installs in any CGA-320 C02 valve that has female threads in the center of the outlet. Use a 5/32″ hex key to screw this in.
Important: Before ordering, check to see if the C02 valve’s outlet hole on your cylinder has female threads. If it does this will work, if the hole is smooth without threads, this will not fit.
From HBF: Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions.
William’s Brewing has announced the availability of Kegland Dry Malt Extract. William’s Brewing has tested these extracts and says that are as good or better than any on the market.
Nukatap Counter Pressure Bottle Filler… $59.99, Compare at $79.99
Nukatap Counter Pressure Bottle Filler
More Info
From the product description, check product page for current description, price and availability:
Do you having a kegging system with beer faucet, and want to bottle kegged beer? The Nukatap Counter Pressure Bottle Filler is an easy way to fill bottles directly from your beer faucet while preserving carbonation in the bottle. The O ring sealed beer inlet nipple press fits into any beer faucet with 10.0 mm inner diameter spout/nozzle including Nukatap, Intertap, Perlick Forward Seal, and Ventmatic faucets.
For the gas inlet side, a male ball lock fitting is provided, so you can use any ball lock gas connector to attach the C02 purging gas. This gas should be at the same pressure as your kegerator dispensing gas, and should be connected to your kegerator C02 regulator. Not Included: you will need a spare gas line from your regulator kegging system with a female ball lock on it to connect your purging C02 gas.
The integrated counter pressure relief valve gives you control of the counter pressure and thus the filling speed. How fast the bottle can be filled without too much foaming depends on CO2 level, beer temperature and bottle temperature. Keep everything cold for the best results.
Fits all 16 ounce and 32 ounce ‘Grolsch’ style swing top bottles.
This connects directly to your compatible forward sealing faucet (Intertap, Nukatap and more) and allows you to easily counter fill bottles directly from the tap.
This is DuoTight compatible, although you don’t need to use DuoTights throughout your entire tap system to use it.
William’s Says… “We have a few dry yeasts in inventory that are past their best by date, but are still viable. These range from a best by date of 11/22 to 2/23, and have been stored refrigerated since we received them. While limited supplies last.”
William’s Brewing has an ongoing Web Only Clearance. That features discounts on a regularly changing selection of gear and supplies.
DuoTight Compatible Plastic Carbonation & Line Cleaning Ball Lock Caps!
Molded Carbonation & Cleaning Cap via William’s Brewing
More Info
From the product description, check product page for current description, price and availability:
This molded male ball lock valve coupling cap that fits a 2 liter or smaller plastic soda bottle with a 28mm screw cap lid. This allows the 2 liter bottle to be charged with C02 from any female ball lock gas fitting (like our item D32 or D03 Gas Connector), carbonating the cold beverage in the bottle. Great for serving draft beer away from the keg. Also fits the Brewzilla in and out ports on the lid, and the Brewzilla Collection Jar ports for pressurizing the Brewzilla fermenter. The hose barb on the bottom is also compatible with our DuoTight fitting Z84 and C55 which lets you easily attach a ball lock fitting to an EvaBarrier 8mm or 9mm outer diameter line.
This has a hybrid ball lock post that will accept beer and gas lines.
IMPORTANT SAFETY WARNING: FOR USE ON PLASTIC SODA BOTTLES AND BREWZILLA ONLY, NEVER USE ON GLASS BOTTLES
What are these used for?
PET Bottles as Growlers: These are generally intended to convert 1L and 2L bottles to growlers. Fill up a 1L or 2L PET bottle with your favorite homebrew. Put one of these on (purge the headspace by squeezing if you want to) and then pressurize for transport. This should help to reduce oxygen pickup and maintain carbonation levels.
Fine tune or rapidly carbonate beer: You can also use this cap to rapidly carbonate beer. Same process as for transport, just set your regulator to the proper pressure and shake or agitate the PET bottle to help introduce CO2. Or hook it up to CO2 and let it sit in you kegerator.
Flushing Carboys, Fermenters and Kegs – As a piece of tubing the barb, hook to your CO2 line and use this to flush receiving vessels with CO2 to reduce O2 pickup.
From the product description, check product page for current description, price and availability:
Make a ball lock keg out out of PET plastic bottles. Great for taking beer to a party or making your own mini keg system with a 2 liter soda bottle.
This tee piece enables you to attach both a liquid and gas ball lock disconnect to the bottle at the same time so you can essencially use a common PET bottle as a keg. Very handy with a two liter soda bottle, as you can get a short length of ¼” interior diameter silicone tubing, attach it to the top Carbonation Cap (not included), fill with beer, and put in the refrigerator, either upright or sideways.
Or if you have Nukatap or Intertap faucets on your draft system, make a draft system cleaner – fill a soda bottle with beer line cleaner, attach an optional ball lock adapter to the end of your Intertap/Nukatap Faucet, and open the faucet to force cleanser into your draft beer system and down the lines.
Note: This is for the tee piece only. You need a soda bottle with standard PCO 1881 thread, 2 item C35 Carbonation Caps, and some ¼” interior diameter tubing to complete your soda bottle keg conversion.
This tee in conjunction with compatible carbonation caps can convert PET bottles into mini kegs or for use flushing or cleaning draft lines.
Hops – William’s periodically discounts hops (by 15%+, sometimes more) when you purchase 6 packs of hops – packs are available in 1,2 and 6 oz sizes. Any size counts as a pack.
Freebies:
William’s periodically offers a free add on item when you purchase a Grainfather
Our William’s Freebie Page
William’s parodically offers a free item with certain size orders. We have a page to track these…
This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:wmsmultiple tag:@ tag:itsapagewms
This 64 ounce MK2 Ultimate Growler from KegLand features vacuum insulated double wall 304 stainless steel construction, and holds cold (and hot) temperatures better than any other growler design. It will keep beer cold for hours. The ultimate growler for beer on the go.
Paired with our double wall vacuum insulated stainless pint, this is the best way to keep beverages cold (or hot) while on the go. The 16 ounce pint glass also includes a travel lid for use as a commuter mug. 12″ tall, 5″ wide.
Get One FREE w/Qualifying Order!
Use coupon code I53A with an order of $125 or more and you’ll get one for free.
No need to add it to your cart. Just use the coupon code at checkout.
Need a good deal on an excellent base malt? We made a special buy on North Star Pils from Rahr Malting. 10% on 10 pound bags, and 14% on 55 lb sacks, while supplies last.
10 lbs are on sale for $17.99 and qualify for flat rate or free shipping
55 lb sacks are on sale for $59.99 + actual shipping charges
William’s Brewing Thermoplastic High Temp Tubing Tubing, 1/2″ ID – from… 89 cents per ft!
This Thermoplastic tubing can withstand temperatures of 275 degrees F., and is food grade. Ideal for piping wort into wort chillers by gravity, although not recommended for pump applications (see our thicker wall tubing L69). This tubing is 1/2″ in interior diameter, and 5/8″ in interior diameter (1/16″ wall). This is the tubing in the middle of the above picture.
Sold per foot, when you enter a quantity of 5, for example, you will get one five foot length. Maximum continuous length is 50′ feet, for example, if you order a quantity of 55, you will get one 50′ roll and one 5′ section.
As of this posting, this is on sale for $1.19 per ft.
Save 25% if you purchase 50 feet or more. That means 50+ ft comes out to just 89 cents per ft. That’s a bargain!
From the product description, check product page for current description, price and availability:
Do you want to keep it simple and just get a commercial keg of beer and dispense? This kit converts any Sankey coupler to an air pump beer dispenser. Keep in mind if you pump a keg with air, the beer will oxidize if left for more than a couple days, so this tap should be used for parties only.
Does not include needed Sankey Coupler, virtually any brand Sankey coupler will work.
As of this posting, William’s Brewing has this on sale for just $23.49.
Because of the real potential for oxygenation I wouldn’t recommend this for a long term (or even mid term solution). To me, these make sense when you’re confident your get-together will go through an entire keg.
44% Off Stainless Steel False Bottom Upgrade for Grainfather
Grainfather False Bottom
More Info
From the product description, check product page for current description, price and availability:
This type 304 stainless false bottom has been designed to perfectly fit the G30 Grainfather. Includes pictured lifting ring. 11 5/8″ overall diameter (290mm), and the 3 legs are 1 1/2″ high, or 35mm
As of this posting this is on sale for just $16.99. That’s a whopping 44% off.
From the product description, check product page for current description, price and availability:
This brass fitting will convert your C02 tank valve into a valve with a permanent sealing O ring. No more need to buy fiber or plastic tank sealing washers.
Installs in any CGA-320 C02 valve that has female threads in the center of the outlet. Use a 5/32″ hex key to screw this in.
Important: Before ordering, check to see if the C02 valve’s outlet hole on your cylinder has female threads. If it does this will work, if the hole is smooth without threads, this will not fit.
From HBF: Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions.
William’s Brewing has announced the availability of Kegland Dry Malt Extract. William’s Brewing has tested these extracts and says that are as good or better than any on the market.
Nukatap Counter Pressure Bottle Filler… $59.99, Compare at $79.99
Nukatap Counter Pressure Bottle Filler
More Info
From the product description, check product page for current description, price and availability:
Do you having a kegging system with beer faucet, and want to bottle kegged beer? The Nukatap Counter Pressure Bottle Filler is an easy way to fill bottles directly from your beer faucet while preserving carbonation in the bottle. The O ring sealed beer inlet nipple press fits into any beer faucet with 10.0 mm inner diameter spout/nozzle including Nukatap, Intertap, Perlick Forward Seal, and Ventmatic faucets.
For the gas inlet side, a male ball lock fitting is provided, so you can use any ball lock gas connector to attach the C02 purging gas. This gas should be at the same pressure as your kegerator dispensing gas, and should be connected to your kegerator C02 regulator. Not Included: you will need a spare gas line from your regulator kegging system with a female ball lock on it to connect your purging C02 gas.
The integrated counter pressure relief valve gives you control of the counter pressure and thus the filling speed. How fast the bottle can be filled without too much foaming depends on CO2 level, beer temperature and bottle temperature. Keep everything cold for the best results.
Fits all 16 ounce and 32 ounce ‘Grolsch’ style swing top bottles.
This connects directly to your compatible forward sealing faucet (Intertap, Nukatap and more) and allows you to easily counter fill bottles directly from the tap.
This is DuoTight compatible, although you don’t need to use DuoTights throughout your entire tap system to use it.
William’s Says… “We have a few dry yeasts in inventory that are past their best by date, but are still viable. These range from a best by date of 11/22 to 2/23, and have been stored refrigerated since we received them. While limited supplies last.”
William’s Brewing has an ongoing Web Only Clearance. That features discounts on a regularly changing selection of gear and supplies.
DuoTight Compatible Plastic Carbonation & Line Cleaning Ball Lock Caps!
Molded Carbonation & Cleaning Cap via William’s Brewing
More Info
From the product description, check product page for current description, price and availability:
This molded male ball lock valve coupling cap that fits a 2 liter or smaller plastic soda bottle with a 28mm screw cap lid. This allows the 2 liter bottle to be charged with C02 from any female ball lock gas fitting (like our item D32 or D03 Gas Connector), carbonating the cold beverage in the bottle. Great for serving draft beer away from the keg. Also fits the Brewzilla in and out ports on the lid, and the Brewzilla Collection Jar ports for pressurizing the Brewzilla fermenter. The hose barb on the bottom is also compatible with our DuoTight fitting Z84 and C55 which lets you easily attach a ball lock fitting to an EvaBarrier 8mm or 9mm outer diameter line.
This has a hybrid ball lock post that will accept beer and gas lines.
IMPORTANT SAFETY WARNING: FOR USE ON PLASTIC SODA BOTTLES AND BREWZILLA ONLY, NEVER USE ON GLASS BOTTLES
What are these used for?
PET Bottles as Growlers: These are generally intended to convert 1L and 2L bottles to growlers. Fill up a 1L or 2L PET bottle with your favorite homebrew. Put one of these on (purge the headspace by squeezing if you want to) and then pressurize for transport. This should help to reduce oxygen pickup and maintain carbonation levels.
Fine tune or rapidly carbonate beer: You can also use this cap to rapidly carbonate beer. Same process as for transport, just set your regulator to the proper pressure and shake or agitate the PET bottle to help introduce CO2. Or hook it up to CO2 and let it sit in you kegerator.
Flushing Carboys, Fermenters and Kegs – As a piece of tubing the barb, hook to your CO2 line and use this to flush receiving vessels with CO2 to reduce O2 pickup.
From the product description, check product page for current description, price and availability:
Make a ball lock keg out out of PET plastic bottles. Great for taking beer to a party or making your own mini keg system with a 2 liter soda bottle.
This tee piece enables you to attach both a liquid and gas ball lock disconnect to the bottle at the same time so you can essencially use a common PET bottle as a keg. Very handy with a two liter soda bottle, as you can get a short length of ¼” interior diameter silicone tubing, attach it to the top Carbonation Cap (not included), fill with beer, and put in the refrigerator, either upright or sideways.
Or if you have Nukatap or Intertap faucets on your draft system, make a draft system cleaner – fill a soda bottle with beer line cleaner, attach an optional ball lock adapter to the end of your Intertap/Nukatap Faucet, and open the faucet to force cleanser into your draft beer system and down the lines.
Note: This is for the tee piece only. You need a soda bottle with standard PCO 1881 thread, 2 item C35 Carbonation Caps, and some ¼” interior diameter tubing to complete your soda bottle keg conversion.
This tee in conjunction with compatible carbonation caps can convert PET bottles into mini kegs or for use flushing or cleaning draft lines.
Hops – William’s periodically discounts hops (by 15%+, sometimes more) when you purchase 6 packs of hops – packs are available in 1,2 and 6 oz sizes. Any size counts as a pack.
Freebies:
William’s periodically offers a free add on item when you purchase a Grainfather
Our William’s Freebie Page
William’s parodically offers a free item with certain size orders. We have a page to track these…
This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:wmsmultiple tag:@ tag:itsapagewms
This 20″ long by 7″ wide stainless tray works well for The KegLand Series X.1 Kegerator (our item B24) when you have the 4 faucet T bar tower. Also perfect for our item S11 Jockey Box. Features a removeable tray, and 5 easy drill locations pressed into the base of the unit with dimples to keep your drill from walking if you want to plumb this into your bench.
Features:
– Made with high quality stainless steel
– Excellent craftsmanship
– Removable grill for easy cleaning
– 500mm x 170mm x 15mm Deep
500mm = 19.7″, 170mm = 6.7″, 15mm = .59″
Today 8/15/2024 only these are on sale for just $29.74
From the product description, check product page for current description, price and availability:
The Brewzilla Gen 4 features a RAPT compatible controller, which means you can track, record, and monitor your beers online through the RAPT portal at https://app.rapt.io. It SHIPS FREE to lower 48.
• Recirculation Pump
• Mash & Boil, and Chill
• Mash up to 20 pounds
• Distilling Options
• Free Wort Chiller Tubing Connection Kit Included
• Runs on 110 volts, plugs in anywhere
New Detachable RAPT WIFI Controller
The RAPT portal has many features: you can see a record of your previous brews, remotely control the unit and turn it on to preheat from your phone, alter temperature settings from your phone, and more. Custom mash temperature profiles can be created and stored, alarms can be set if you want it to remind you when to add hop stages, or tell you when the strike water is heated and it is time to mash. All functions go through the RAPT controller; there are no longer toggle switches to control things like wattage and the pump.
New Concave Draining Base
The new base is dished towards the center so it drains all the wort. No need to tilt the unit to extract every drop of wort.
Larger Capacity Malt Pipe with Two Positions
The new high flow malt pipe is 20% larger than the old, meaning the 35 Liter Brewzilla can now mash up to 20 pounds of crushed malt per batch. This is great for high gravity beers, and enabled by the new concave base drain, which gave the designers more room for a malt pipe. The malt pipe also now has two positions, so you can lift it halfway up and twist for smaller batches, or lift it all the way like before for full batches. This is the latest version, with side perforations in addition to bottom of the basket perforations.
Easy Access Pump
The bottom cover has been reduced in size to only house the sensitive electrical components. This leave the pump easily accessible in case you need to clear a clog or replace a drain hose.
The Gen 4 Brewzilla with Pump from KegLand features a recirculation pump, as well as a false bottom and grain pipe to both protect the pump from clogging, and hold the crushed grain above the bottom for good wort circulation. The Unit holds 9 gallons, although we do not recommend boiling more than 6½ gallons (perfect for 5-6 gallon batches). The grain pipe (basket) holds up to 20 pounds of crushed malt, and a pipe with included silicone hose on top feeds the recirculated wort from the pump evenly on top of the grain bed. Runs on any GFCI protected 110 volt plug with at least 15 amps. Includes a free Chiller Tubing Connection Kit with 15’ of tubing. Dimensions: 12” by 12” by 25” with the grain pipe removed.
For a short time William’s Brewing has this on sale for $479.99. That’s $120 in savings.
This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:lnksfxd rpu:wmsbrewzilla:rpu
The DigiMash from KegLand is the best value in an electric brewing system, and features your choice of 110 or 220 volt models, as well as a capacity choice of 35 or 65 liters. The 35 liter model is available in both standard 110 volt plug or a 220 volt plug. Most people pick the 110 volt version, although the 220 volt version heats five gallons to boiling in less than 30 minutes, while the 110 volt 35 liter model heats five gallons to boiling in about 50 minutes. The choice is yours!
For a limited time William’s Brewing has all sizes and options marked down 15%.
Need a good deal on an excellent base malt? We made a special buy on North Star Pils from Rahr Malting. 10% on 10 pound bags, and 14% on 55 lb sacks, while supplies last.
10 lbs are on sale for $17.99 and qualify for flat rate or free shipping
55 lb sacks are on sale for $59.99 + actual shipping charges
FermZilla Gen 3.2 27 Liter Tri Conical Fermenter via William’s Brewing
More Info
From the product description, check product page for current description, price and availability:
The Gen 3.2 FermZilla Tri Conical features a 3” Tri-Clamp fitting to attach the dump valve, and a 2” Tri-Clamp fitting to attach the improved 3.2 yeast collection vessel. This makes it easy to disassemble the fermenter for cleaning, and to remove and reattach the yeast collection vessel.
The FermZilla can be used in many ways -use it as a basic gravity fermenter with the ability to dump and harvest yeast, or as a pressure fermenter and or keg with optional Spunding Valve part C71 and Pressure Kit part C77, as a chilled fermenter with an optional Temp Twister and Cooling Kit, and even as a Hop Bong Pressure Kit, with the ability to add dry hops without adding oxygen.
Includes a lid with 35 PSI PRV valve, stainless stand, airlock, 600 ml collection container with 3″ Tri Clamp lid, and Tri Clamp fittings to assemble and use the fermenter. Overall height with airlock is 34″, with a width of 14″.
William’s Brewing has this on sale for just $127.99
William’s Brewing Thermoplastic High Temp Tubing Tubing, 1/2″ ID – from… 89 cents per ft!
This Thermoplastic tubing can withstand temperatures of 275 degrees F., and is food grade. Ideal for piping wort into wort chillers by gravity, although not recommended for pump applications (see our thicker wall tubing L69). This tubing is 1/2″ in interior diameter, and 5/8″ in interior diameter (1/16″ wall). This is the tubing in the middle of the above picture.
Sold per foot, when you enter a quantity of 5, for example, you will get one five foot length. Maximum continuous length is 50′ feet, for example, if you order a quantity of 55, you will get one 50′ roll and one 5′ section.
As of this posting, this is on sale for $1.19 per ft.
Save 25% if you purchase 50 feet or more. That means 50+ ft comes out to just 89 cents per ft. That’s a bargain!
From the product description, check product page for current description, price and availability:
Do you want to keep it simple and just get a commercial keg of beer and dispense? This kit converts any Sankey coupler to an air pump beer dispenser. Keep in mind if you pump a keg with air, the beer will oxidize if left for more than a couple days, so this tap should be used for parties only.
Does not include needed Sankey Coupler, virtually any brand Sankey coupler will work.
As of this posting, William’s Brewing has this on sale for just $23.49.
Because of the real potential for oxygenation I wouldn’t recommend this for a long term (or even mid term solution). To me, these make sense when you’re confident your get-together will go through an entire keg.
44% Off Stainless Steel False Bottom Upgrade for Grainfather
Grainfather False Bottom
More Info
From the product description, check product page for current description, price and availability:
This type 304 stainless false bottom has been designed to perfectly fit the G30 Grainfather. Includes pictured lifting ring. 11 5/8″ overall diameter (290mm), and the 3 legs are 1 1/2″ high, or 35mm
As of this posting this is on sale for just $16.99. That’s a whopping 44% off.
From the product description, check product page for current description, price and availability:
This brass fitting will convert your C02 tank valve into a valve with a permanent sealing O ring. No more need to buy fiber or plastic tank sealing washers.
Installs in any CGA-320 C02 valve that has female threads in the center of the outlet. Use a 5/32″ hex key to screw this in.
Important: Before ordering, check to see if the C02 valve’s outlet hole on your cylinder has female threads. If it does this will work, if the hole is smooth without threads, this will not fit.
From HBF: Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions.
William’s Brewing has announced the availability of Kegland Dry Malt Extract. William’s Brewing has tested these extracts and says that are as good or better than any on the market.
Nukatap Counter Pressure Bottle Filler… $59.99, Compare at $79.99
Nukatap Counter Pressure Bottle Filler
More Info
From the product description, check product page for current description, price and availability:
Do you having a kegging system with beer faucet, and want to bottle kegged beer? The Nukatap Counter Pressure Bottle Filler is an easy way to fill bottles directly from your beer faucet while preserving carbonation in the bottle. The O ring sealed beer inlet nipple press fits into any beer faucet with 10.0 mm inner diameter spout/nozzle including Nukatap, Intertap, Perlick Forward Seal, and Ventmatic faucets.
For the gas inlet side, a male ball lock fitting is provided, so you can use any ball lock gas connector to attach the C02 purging gas. This gas should be at the same pressure as your kegerator dispensing gas, and should be connected to your kegerator C02 regulator. Not Included: you will need a spare gas line from your regulator kegging system with a female ball lock on it to connect your purging C02 gas.
The integrated counter pressure relief valve gives you control of the counter pressure and thus the filling speed. How fast the bottle can be filled without too much foaming depends on CO2 level, beer temperature and bottle temperature. Keep everything cold for the best results.
Fits all 16 ounce and 32 ounce ‘Grolsch’ style swing top bottles.
This connects directly to your compatible forward sealing faucet (Intertap, Nukatap and more) and allows you to easily counter fill bottles directly from the tap.
This is DuoTight compatible, although you don’t need to use DuoTights throughout your entire tap system to use it.
William’s Brewing has a number of yeast deals going on. Shipping is free or reasonably priced flat rate to addresses in the contiguous US depending on your order size for most items.
From the product description, check product page for current description, price and availability:
Allows beer faucets to be attached to a 1/4″ male male flare keg connection fitting. In addition to this fitting, you will need a threaded beer ball lock fitting (like KegLand item B12), a suitable beer faucet (like Nukatap item X85). and a faucet securing nut (Q53).
Note: This does not work with flow control faucets. Made by Krome Dispense.
This allows you to connect a faucet directly to your ball lock or pin lock keg via a threaded MFL QD (not included)
As of this posting, William’s Brewing has this on sale for just $1.99.
William’s Says… “We have a few dry yeasts in inventory that are past their best by date, but are still viable. These range from a best by date of 11/22 to 2/23, and have been stored refrigerated since we received them. While limited supplies last.”
William’s Brewing has an ongoing Web Only Clearance. That features discounts on a regularly changing selection of gear and supplies.
DuoTight Compatible Plastic Carbonation & Line Cleaning Ball Lock Caps!
Molded Carbonation & Cleaning Cap via William’s Brewing
More Info
From the product description, check product page for current description, price and availability:
This molded male ball lock valve coupling cap that fits a 2 liter or smaller plastic soda bottle with a 28mm screw cap lid. This allows the 2 liter bottle to be charged with C02 from any female ball lock gas fitting (like our item D32 or D03 Gas Connector), carbonating the cold beverage in the bottle. Great for serving draft beer away from the keg. Also fits the Brewzilla in and out ports on the lid, and the Brewzilla Collection Jar ports for pressurizing the Brewzilla fermenter. The hose barb on the bottom is also compatible with our DuoTight fitting Z84 and C55 which lets you easily attach a ball lock fitting to an EvaBarrier 8mm or 9mm outer diameter line.
This has a hybrid ball lock post that will accept beer and gas lines.
IMPORTANT SAFETY WARNING: FOR USE ON PLASTIC SODA BOTTLES AND BREWZILLA ONLY, NEVER USE ON GLASS BOTTLES
What are these used for?
PET Bottles as Growlers: These are generally intended to convert 1L and 2L bottles to growlers. Fill up a 1L or 2L PET bottle with your favorite homebrew. Put one of these on (purge the headspace by squeezing if you want to) and then pressurize for transport. This should help to reduce oxygen pickup and maintain carbonation levels.
Fine tune or rapidly carbonate beer: You can also use this cap to rapidly carbonate beer. Same process as for transport, just set your regulator to the proper pressure and shake or agitate the PET bottle to help introduce CO2. Or hook it up to CO2 and let it sit in you kegerator.
Flushing Carboys, Fermenters and Kegs – As a piece of tubing the barb, hook to your CO2 line and use this to flush receiving vessels with CO2 to reduce O2 pickup.
From the product description, check product page for current description, price and availability:
Make a ball lock keg out out of PET plastic bottles. Great for taking beer to a party or making your own mini keg system with a 2 liter soda bottle.
This tee piece enables you to attach both a liquid and gas ball lock disconnect to the bottle at the same time so you can essencially use a common PET bottle as a keg. Very handy with a two liter soda bottle, as you can get a short length of ¼” interior diameter silicone tubing, attach it to the top Carbonation Cap (not included), fill with beer, and put in the refrigerator, either upright or sideways.
Or if you have Nukatap or Intertap faucets on your draft system, make a draft system cleaner – fill a soda bottle with beer line cleaner, attach an optional ball lock adapter to the end of your Intertap/Nukatap Faucet, and open the faucet to force cleanser into your draft beer system and down the lines.
Note: This is for the tee piece only. You need a soda bottle with standard PCO 1881 thread, 2 item C35 Carbonation Caps, and some ¼” interior diameter tubing to complete your soda bottle keg conversion.
This tee in conjunction with compatible carbonation caps can convert PET bottles into mini kegs or for use flushing or cleaning draft lines.
Hops – William’s periodically discounts hops (by 15%+, sometimes more) when you purchase 6 packs of hops – packs are available in 1,2 and 6 oz sizes. Any size counts as a pack.
Freebies:
William’s periodically offers a free add on item when you purchase a Grainfather
Our William’s Freebie Page
William’s parodically offers a free item with certain size orders. We have a page to track these…
This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:wmsmultiple tag:@ tag:itsapagewms
Cleaning a closed system, whether it be a draft line, plate chiller, or pump, is always a little uncertain. How do you know for sure you have effectively cleaned the interior of something you cannot access?
Here is where TM DESENAMAX comes in. This patented color indicating caustic cleaner for closed brewing systems is initially purple when mixed, which changes to green or yellow after it removes organic deposits from a closed system. To be sure your closed system is clean after this initial cleaning, flush out the spent green or yellow cleaner and refill with fresh purple cleaner – when it comes out purple the second time, you can be sure your system is clean. Each 1.5 oz pack makes 1.5 gallons of working solution. Be sure to rinse with water before using your closed system.
This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions. tag:lnksfxd rpu:wmstmdesanamax:rpu
From the product description, check product page for current description, price and availability:
The Brewzilla Gen 4 features a RAPT compatible controller, which means you can track, record, and monitor your beers online through the RAPT portal at https://app.rapt.io. It SHIPS FREE to lower 48.
• Recirculation Pump
• Mash & Boil, and Chill
• Mash up to 20 pounds
• Distilling Options
• Free Wort Chiller Tubing Connection Kit Included
• Runs on 110 volts, plugs in anywhere
New Detachable RAPT WIFI Controller
The RAPT portal has many features: you can see a record of your previous brews, remotely control the unit and turn it on to preheat from your phone, alter temperature settings from your phone, and more. Custom mash temperature profiles can be created and stored, alarms can be set if you want it to remind you when to add hop stages, or tell you when the strike water is heated and it is time to mash. All functions go through the RAPT controller; there are no longer toggle switches to control things like wattage and the pump.
New Concave Draining Base
The new base is dished towards the center so it drains all the wort. No need to tilt the unit to extract every drop of wort.
Larger Capacity Malt Pipe with Two Positions
The new high flow malt pipe is 20% larger than the old, meaning the 35 Liter Brewzilla can now mash up to 20 pounds of crushed malt per batch. This is great for high gravity beers, and enabled by the new concave base drain, which gave the designers more room for a malt pipe. The malt pipe also now has two positions, so you can lift it halfway up and twist for smaller batches, or lift it all the way like before for full batches. This is the latest version, with side perforations in addition to bottom of the basket perforations.
Easy Access Pump
The bottom cover has been reduced in size to only house the sensitive electrical components. This leave the pump easily accessible in case you need to clear a clog or replace a drain hose.
The Gen 4 Brewzilla with Pump from KegLand features a recirculation pump, as well as a false bottom and grain pipe to both protect the pump from clogging, and hold the crushed grain above the bottom for good wort circulation. The Unit holds 9 gallons, although we do not recommend boiling more than 6½ gallons (perfect for 5-6 gallon batches). The grain pipe (basket) holds up to 20 pounds of crushed malt, and a pipe with included silicone hose on top feeds the recirculated wort from the pump evenly on top of the grain bed. Runs on any GFCI protected 110 volt plug with at least 15 amps. Includes a free Chiller Tubing Connection Kit with 15’ of tubing. Dimensions: 12” by 12” by 25” with the grain pipe removed.
For a short time William’s Brewing has this on sale for $479.99. That’s $120 in savings.
This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:lnksfxd rp:wmsbrewzilla:rp
Need a good deal on an excellent base malt? We made a special buy on North Star Pils from Rahr Malting. 10% on 10 pound bags, and 14% on 55 lb sacks, while supplies last.
10 lbs are on sale for $17.99 and qualify for flat rate or free shipping
55 lb sacks are on sale for $59.99 + actual shipping charges
This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
Molded Carbonation & Cleaning Cap via William’s Brewing
More Info
From the product description, check product page for current description, price and availability:
This molded male ball lock valve coupling cap that fits a 2 liter or smaller plastic soda bottle with a 28mm screw cap lid. This allows the 2 liter bottle to be charged with C02 from any female ball lock gas fitting (like our item D32 or D03 Gas Connector), carbonating the cold beverage in the bottle. Great for serving draft beer away from the keg. Also fits the Brewzilla in and out ports on the lid, and the Brewzilla Collection Jar ports for pressurizing the Brewzilla fermenter. The hose barb on the bottom is also compatible with our DuoTight fitting Z84 and C55 which lets you easily attach a ball lock fitting to an EvaBarrier 8mm or 9mm outer diameter line.
This has a hybrid ball lock post that will accept beer and gas lines.
IMPORTANT SAFETY WARNING: FOR USE ON PLASTIC SODA BOTTLES AND BREWZILLA ONLY, NEVER USE ON GLASS BOTTLES
What are these used for?
PET Bottles as Growlers: These are generally intended to convert 1L and 2L bottles to growlers. Fill up a 1L or 2L PET bottle with your favorite homebrew. Put one of these on (purge the headspace by squeezing if you want to) and then pressurize for transport. This should help to reduce oxygen pickup and maintain carbonation levels.
Fine tune or rapidly carbonate beer: You can also use this cap to rapidly carbonate beer. Same process as for transport, just set your regulator to the proper pressure and shake or agitate the PET bottle to help introduce CO2. Or hook it up to CO2 and let it sit in you kegerator.
Flushing Carboys, Fermenters and Kegs – As a piece of tubing the barb, hook to your CO2 line and use this to flush receiving vessels with CO2 to reduce O2 pickup.
