Category Archives: williamsbrewing.com

Mark II 25 Watt Wort Pump – on sale for $39.99 via Black Friday Sale!

Mark II 25 Watt Wort Pump

Mark II 25 Watt Wort Pump from William’s Brewing

More Info

From the product description, check product page for current description, price and availability:

The MKII Pump from Keg Land is a magnetic drive high temperature pump capable of pumping hot wort at temperatures of up to 248° F. It can pump up to 5 gallons per minute, making it perfect for 5 to 20 gallon systems. The maximum height it can pump is 11’ although gallons per minute will be reduced at higher pumping elevations.

The pump head and impeller are constructed of food grade Xarec plastic (very similar to Polysulphone). The magnetic drive acts as a clutch allowing the user to put back pressure on the pump to slow down flow. Like all magnetic drive wort pumps, it is not self priming – you must flood the pump head before turning on the pump. The pump has ½” BSP male fittings on the inlet and outlet, which are compatible with all our ½” female NPT fittings. The inlet is in the center. Besides Xarec plastic, other wetted interior materials are nitrile rubber and stainless steel.

The magnetic drive ensures no lubricated bearings are in contact with the liquid at all, so you can be sure there is no chance of any contamination of the liquid being pumped. The pump features a 67” power cord, and a mounting plate for permanent mounting. The pump is 7¾” in overall length, and 3¼” wide including the mounting plate. The polysulfone head can be mounted at any angle on the pump to fit your application (an optional stainless head, William’s item Q80, is also available). Shop around and compare, we think this is the best value currently available in a high temperature wort transfer pump.

Important Safety Notice: This pump, like all 110 volt items that run in potentially wet areas, should be plugged into a GFI protected outlet for safety.

 

Mark II 25 Watt Wort PumpBlack Friday Specials at William’s Brewing

Stainless Steel Head Upgrade

Also at William’s Brewing: Mark II 65 Watt Wort Pump

Check sale or product page for current availability & pricing

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:wmsmii25pump

KegLand Bucket Buddy HEATED Fermenter – $129.99! via Wm’s Black Friday Sale!

35L SS Bucket Buddy Fermenter with Integrated Heating Element

KegLand 35 Liter Bucket Buddy Heated Fermenter

More Info

From the product description, check product page for current description, price and availability:

Made from 304 grade stainless steel and has an integrated (concealed) 36 Watt heating element which runs on any 110 volt outlet. No need to worry about accessories such as heating belts and external temperature controllers. This stainless steel fermenter will keep your yeast at optimal temperature during colder months.  The welding is smooth and the outer body has a sleek brushed stainless finish making it easy to clean and maintain. The heating element is a ring around the bottom of the fermenter, and is not in the bottom, which means your yeast cake will not get heated and contribute off flavors.  Holds 35 liters or 8.5 gallons, although the interior liter marks end at 30, and the gallon markers on the inside end at 8 gallons.

The efficient 36 watt element will heat 5 gallons about 2-3° per hour. For example, if you put 5 gallons of wort with a temperature of 64° F in at 9am, with an ambient room temperature of 65° F, by 4pm the wort should be about 80° F assuming you set the fermentation temperature for 84° F. or higher. It will heat to a maximum of 35 degrees above room ambient temperature, so if your room is 65° F, and you will be able to heat to a maximum of 100° F, which takes about 24 hours to reach from a starting temperture of 65°.  If your ambient temperature is a lot colder performance will be less, so your mileage will vary.  So you can ferment Kveik yeasts with this fermenter.

The base inside this unit is a dome so it is easy to clean while the rotating rack arm enables you to drain out all the fermented beer or wine. The valve and racking come out easily for cleaning between batches. The outlet on the valve is barbed to accept 3/8″ interior diameter tubing, and 3′ of tubing are included.

Although not designed for the Bucket Buddy, the Fermzilla 27 Liter Jacket fits this unit fairly well if you need more insulation for colder situations.

NOTE:The lid is also a dome so this vessel can take a very small amount of pressure (2 PSI) but not enough for pressure transfers or pressurised fermentations.

To change the display from Centigrade to Fahrenheit, press both the plus and minus buttons on the control pad for 10 seconds.

Exterior dimensions: 32″ tall including airlock, 15″ wide including handles

Interior dimensions: 22″ tall, 11.75″ wide

 

KegLand 35 Liter Bucket Buddy Heated FermenterBlack Friday Specials at William’s Brewing

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

Kegland DuoTight BlowTie Spunding Valve… $11.99! on Black Friday Deals

15 PSI Duotight Blowtie Spunding Valve with Gauge

DuoTight BlowTie Spunding Valve With Gauge

More Info

From the product description, check product page for current description, price and availability:

The BlowTie is a diaphragm based adjustable spunding valve used to release pressure from kegs and other pressure vessels. It features a usable range of 4 to 15 PSI, and the diaphragm construction means it has a wider pressure range than spring based spundling valves. This unit can be easily disassembled for cleaning using a phillips head screw driver. Accuracy of the gauge is plus or minus 2 PSI.


 

A Spunding Valve allows you to ferment under pressure, naturally and precisely carbonate in the keg, fix over-carbonated beers and lots more. See: Build a Spunding Valve – for loads of information on building and using a Spunding Valve.

DuoTight BlowTie Spunding Valve With GaugeBlack Friday Specials at William’s Brewing

Homebrew Finds is Spunding Central! Build a Spunding Valve! – How and Why << a top resource on the subject

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability

Upgrade to Digital:

Kegland has released a digital regulator option that works with their great inline regulator and gauge-equipped BlowTie Spunding Valves.

Hands on Review: Kegland Digital Gauges!

Continue reading

KegLand DigiBoil 65L Electric Brew Kettle, 220v – on sale for $194.99 AND up to $50 Off

KegLand 65 Liter Digiboil (220 volts)

KegLand 65 Liter Digiboil (220 volts) from William’s Brewing

More Info

From the product description, check product page for current description, price and availability:

The 65 Liter KegLand Digiboil is an 17 gallon electric boiling pot with precise digital control. It requires a 220 volt plug, and features 3500 watts of total power, selectable with two switches. Perfect for brewing, distilling, sous vide cooking, and more. Keep in mind that although it has an 17 gallon capacity, we recommend you boil no more than 11 gallons, to allow head space to prevent damaging boil overs.

The digital display can be set to any temperature between 32° and 212° F, and hold that temperature to plus or minus 5 degrees. The valve features standard 1/2″ threads, so you can fit female NPT 1/2″ accessories such as cam lock fittings to the spigot for attaching chillers and other accessories. The rim features clamps, and standard Robobrew and Grainfather distilling lids will fit perfectly.

This unit must be plugged into a dedicated 220 volt outlet to operate. The unit should not be submersed in water. 30″ tall, 19″ wide. The 220 volt power cord is 5′ long.

When brewing with malt extract, you will need to get your water boiling, then shut off the heat momentarily while you stir the extract in to dissolve. This eliminates the extract from burning on the bottom, and prevents the thermostat protective circuit from throwing an error. As soon as the extract is dissolved, turn back on the heat and brew.

Note: The Digiboil is primarily designed for boiling, distilling, and heating sparge water. It is not designed for Brew In Bag or mashing directly in the unit. If you suspend a large grain bag in the unit or add mash directly to the unit, it will throw a thermal protection error, because the grain or the grain bag will cover the thermostat, which will then shut off the heating element.

Compatible with 65 Liter Brewzilla accessories like our J78 Distilling Lid, and X96 Brewzilla Jacket.


 

KegLand 65 Liter Digiboil (220 volts)

AND Get up to $50 off!

William’s Brewing is discounting most orders by up to $50 based on order size. Excludes grain, sugar, gift certificates, Blichmann and Behmor. Coupons in graphic above.

William’s Brewing Holiday Coupon Sale

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

$50 Off Kegland Benchy Sparkling – Chilled Carbonated Water on Demand

Benchy Sparkling

Benchy Sparkling

More Info

From the product description, check product page for current description, price and availability:

Benchy Sparkling is the answer for instant chilled and carbonated water water on demand. Simply connect tap water and a CO2 Cylinder with Regulator to the unit and dispense unlimited sparkling and chilled water .

Using the regulator, you are able to adjust and really dial in carbonation levels to your specific taste preferences which you are unable to do on other similar systems on the market.

Basic Setup Is As Follows*

Plug into the wall

Fill internal water tank

Connect house water supply

Connect CO2 Cylinder and Regulator (not included)

Attach beer faucets (not included)

Pour chilled sparking water in one hour or less.

*Ensure that the unit is installed and operated according to the instruction manual which can be found by clicking here.

Fully Adjustable – The Benchy Sparkling has integrated (centigrade only) digital temp controller so you can control the temperature from 0.5C and up to 10C (from 33° to 50° F.) You can also vary the carbonation level from 0.5 volumes to over 5 volumes for super bubbly water.

Cooling Performance – The Benchy Sparkling is able to chill about 5 gallons of sparkling water per hour (based on ambient water and air temperature of 68° F). To further increase the capacity of this unit you can pre-chill the house water supply either by a holding tank (Keg) in the fridge or a G40 Chiller. If you pre-chill the tap water supply you can double the output of the Benchy Sparkling.

Specifications:

Height: 19”
Width: 12”
Depth: 21” (Excluding sight glass that can be removed)
Refrigerant: r600a – (80grams)
Cooling Power: 600watts, 110 volts.
Power Consumption: 290w (idle power consumption less than 5 watts)
Capacity: about 25L per hour (based on 68° F. ambient temperature)
Input Gas: CO2 30 to 50 PSI (8mm (5/16) OD Tube)
Input Water: Must be (15psi) higher than gas pressure (6.35mm (1/4″) OD Tube)
Sparkling/Chilled Water Out: 8mm (5/16″) OD Tube

IMPORTANT: This is a complex product with many configuration options. We highly recommend you read the product instructions before ordering. Click here for instructions.

Other recommended accessories:

1 x C02 Gas Cylinder

1 x MK4 Gas Regulator

1 x EvaBarrier 4mm ID by 8mm OD Tubing
1 x 3mm by 6mm EvaBarrier Water Tubing
Water Supply Valve for icemaker that takes ¼” tubing (get at a hardware store)
1 x DuoTight InLine Regulator

1 x DuoTight 8mm Check Valve

2 x Nukatap Flow Control Faucets


 

For a short time William’s Brewing has this marked down $50 to $899.99. Shipping is free to many US addresses.

Benchy Sparkling

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:watchan Announcing: Kegland Benchy Sparkling – Chilled Carbonated Water On Demand  11.13.23

KegLand DigiBoil 65L Electric Brew Kettle, 220v – on sale for $194.99 at William’s Brewing

KegLand 65 Liter Digiboil (220 volts)

KegLand 65 Liter Digiboil (220 volts) from William’s Brewing

More Info

From the product description, check product page for current description, price and availability:

The 65 Liter KegLand Digiboil is an 17 gallon electric boiling pot with precise digital control. It requires a 220 volt plug, and features 3500 watts of total power, selectable with two switches. Perfect for brewing, distilling, sous vide cooking, and more. Keep in mind that although it has an 17 gallon capacity, we recommend you boil no more than 11 gallons, to allow head space to prevent damaging boil overs.

The digital display can be set to any temperature between 32° and 212° F, and hold that temperature to plus or minus 5 degrees. The valve features standard 1/2″ threads, so you can fit female NPT 1/2″ accessories such as cam lock fittings to the spigot for attaching chillers and other accessories. The rim features clamps, and standard Robobrew and Grainfather distilling lids will fit perfectly.

This unit must be plugged into a dedicated 220 volt outlet to operate. The unit should not be submersed in water. 30″ tall, 19″ wide. The 220 volt power cord is 5′ long.

When brewing with malt extract, you will need to get your water boiling, then shut off the heat momentarily while you stir the extract in to dissolve. This eliminates the extract from burning on the bottom, and prevents the thermostat protective circuit from throwing an error. As soon as the extract is dissolved, turn back on the heat and brew.

Note: The Digiboil is primarily designed for boiling, distilling, and heating sparge water. It is not designed for Brew In Bag or mashing directly in the unit. If you suspend a large grain bag in the unit or add mash directly to the unit, it will throw a thermal protection error, because the grain or the grain bag will cover the thermostat, which will then shut off the heating element.

Compatible with 65 Liter Brewzilla accessories like our J78 Distilling Lid, and X96 Brewzilla Jacket.


 

KegLand 65 Liter Digiboil (220 volts)

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

Announcing: KegLand Low2 Keg Lid O-Rings – or – Low Cost Buna-N w/Similar Specs

KegLand Low 2 Keg Lid O Ring

KegLand Low2 Keg Lid O-Rings

From William’s Brewing

This silicone O ring fits all corny type oval keg lids, and provides a better oxygen barrier than standard O rings.


OR – Lots Cheaper AND Similar Permeability Characteristics

Keg Lid O-Rings - Food Safe Buna-NKeg Lid O-Rings – Food Safe Buna-N


Works on both ball lock and pin lock kegs: In most cases, Pin lock and ball lock cornelius style keg lids are interchangeable from a size perspective.  That means you can, generally speaking, put a pepsi/ball lock style (manual prv) lid on a coke/pin lock style (no manual prv) keg.  In my book, that’s a solid upgrade.

See: What’s the Difference Between Ball Lock Kegs and Pin Lock Kegs?

Related: Keg Repair Part #s

KegLand Low 2 Keg Lid O Ring

Related: Our Beer is food, right?  Shouldn’t we be using materials rated for food?  See: Food Safe Replacement Keg O-Rings



Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

Announcing: Kegland Rotary Spray Head!

kegland spray head

KegLand Spray Head

More Info

From the product description, check product page for current description, price and availability:

Make cleaning your electric brewery easier with the Low Volume CIP Spray rotor. A low-flow spray head for low voltage pumps from 6w to 25w. The perfect spray head for 5 and 10 gallon vessels, including Mash & Boil with Pump and Brewzilla. The red cleaning unit features 1/2″ straight threads and attaches to the included 1/2″ hose barb with nut. Functions a bit like a keg washer – just turn it on and let it spin for 15 minutes or so with a suitable cleanser like Brewer’s Edge Cleanser or Kemphos 2001. Unlike simple rinsing, this unit really deep cleans the impossible to visually inspect interior plumbing of your brewery.

What makes it even more effective is you can turn the heat on your electric brewery up to say 160 degrees F, and the splashing cleanser will be more effective than at room temperature.

Clean your Brewzilla or Mash & Boil with Pump. If you have a Brewzilla, watch the video below for setup instructions.

If you have a Mash & Boil or Grainfather, you will also need to order 1′ of our item J46 Silicone Tubing, as this tighter tubing is needed to securely attach the Spray Rotor to the Mash & Boil or Grainfather Recirculation Arm.


 

KegLand Spray Head

Related: BrewZilla Review

Hands on Review: BrewZilla Gen 4 All Grain Brewing System

Related: About CIP Spray Balls

CIP (Clean in Place) Spray Balls are generally used for vessels that are too large to move.  Since they’re too large to move you… clean them in place.  If you have a larger setup, you could incorporate these into your system or routine to help clean your vessels more easily.

Other possible homebrew applications: A CIP ball could be as part of a recirculating or sparging setup or as part of a keg or carboy cleaning setup. I use a (different model) rotary spray ball with my Mark II Keg and Carboy Cleaner.  See: Mark II Keg and Carboy Washer Mod – SS CIP Spray Ball. Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

Also: Stainless Steel CIP Spray Balls for Sparging and Cleaning

Mark II Keg and Carboy Washer Mod - Adding a Stainless Steel CIP Spray Ball

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

William’s Brewing Black Friday Sale!

williamsbrewing.com black friday

William’s Brewing Black Friday Sale is discounting loads of items as part of a limited time Black Friday Sale.

Black Friday Specials at William’s Brewing

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:wmsbf tag:itsapagewms

William’s Brewing Black Friday Sale!

williamsbrewing.com black friday

William’s Brewing Black Friday Sale is discounting loads of items as part of a limited time Black Friday Sale.

Black Friday Specials at William’s Brewing

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:wmsbf tag:itsapagewms

William’s Brewing Black Friday Sale!

williamsbrewing.com black friday

William’s Brewing Black Friday Sale is discounting loads of items as part of a limited time Black Friday Sale.

Black Friday Specials at William’s Brewing

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:wmsbf tag:itsapagewms

William’s Brewing Black Friday Sale!

williamsbrewing.com black friday

William’s Brewing Black Friday Sale is discounting loads of items as part of a limited time Black Friday Sale.

Black Friday Specials at William’s Brewing

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:wmsbf tag:itsapagewms

William’s Brewing Black Friday Sale!

williamsbrewing.com black friday

William’s Brewing Black Friday Sale is discounting loads of items as part of a limited time Black Friday Sale.

Black Friday Specials at William’s Brewing

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:wmsbf tag:itsapagewms

Ends Today: Kegland Spund G2 Spunding Valve! On Sale for $9.99!

Spund G2 Spunding Valve

More Info

From the product description, check product page for current description, price and availability:

Compact ball lock spunding valve features a 0-30 PSI gauge and now features an adjustable manual pressure pull ring relief valve (adjusts from 0-15 PSI). The adjustable manual pressure release can be removed, and a corny keg pressure relief valve installed in its place. The gauge features a standard DuoTight 8mm stem, and can be replaced with our DuoTight gauges, like our items C18, Z97, and E69 if desired.

Lots of ways to use this and upgrade it. If you want more accuracy than the manual adjustable spring loaded relief valve, you can upgrade with our item C16 DuoTight Blowtie valve, which has a rubber diaphragm valve which will always be more accurate at low pressures than the included spring loaded adjustable relief valve. If you do this, you will also need DuoTight Joiner, item number C70.

You can also replace the manual adjustable relief valve with preset keg relief valves like our item G65 (17 PSI) or B54 (0-30 PSI).


 

A Spunding Valve allows you to ferment under pressure, naturally and precisely carbonate in the keg, fix over-carbonated beers and lots more. See: Build a Spunding Valve – for loads of information on building and using a Spunding Valve.

Spund G2 Spunding Valve

Homebrew Finds is Spunding Central! Build a Spunding Valve! – How and Why << a top resource on the subject

Also Consider: BlowTie Spunding Valve


DuoTight Reviews, Resource Posts & How-To’s!

DuoTights are so amazing – at least in my book 🙂 – that I have several reviews and related top posts

allduotight

I Recommend These for DuoTight Fittings!

duotightclips

DuoTight Ball Lock QDs!

duotight ball lock quick disconnect review

My DuoTight Review!

duotightreview

Homebrew Finds is Spunding Central!

tsrspund

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:ntrd

Ends Soon: Kegland Spund G2 Spunding Valve! On Sale for $9.99!

Spund G2 Spunding Valve

More Info

From the product description, check product page for current description, price and availability:

Compact ball lock spunding valve features a 0-30 PSI gauge and now features an adjustable manual pressure pull ring relief valve (adjusts from 0-15 PSI). The adjustable manual pressure release can be removed, and a corny keg pressure relief valve installed in its place. The gauge features a standard DuoTight 8mm stem, and can be replaced with our DuoTight gauges, like our items C18, Z97, and E69 if desired.

Lots of ways to use this and upgrade it. If you want more accuracy than the manual adjustable spring loaded relief valve, you can upgrade with our item C16 DuoTight Blowtie valve, which has a rubber diaphragm valve which will always be more accurate at low pressures than the included spring loaded adjustable relief valve. If you do this, you will also need DuoTight Joiner, item number C70.

You can also replace the manual adjustable relief valve with preset keg relief valves like our item G65 (17 PSI) or B54 (0-30 PSI).


 

A Spunding Valve allows you to ferment under pressure, naturally and precisely carbonate in the keg, fix over-carbonated beers and lots more. See: Build a Spunding Valve – for loads of information on building and using a Spunding Valve.

Spund G2 Spunding Valve

Homebrew Finds is Spunding Central! Build a Spunding Valve! – How and Why << a top resource on the subject

Also Consider: BlowTie Spunding Valve


DuoTight Reviews, Resource Posts & How-To’s!

DuoTights are so amazing – at least in my book 🙂 – that I have several reviews and related top posts

allduotight

I Recommend These for DuoTight Fittings!

duotightclips

DuoTight Ball Lock QDs!

duotight ball lock quick disconnect review

My DuoTight Review!

duotightreview

Homebrew Finds is Spunding Central!

tsrspund

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:ntrd

Ends Soon: FREE Set Nucleated Beer Can Glasses from William’s Brewing + Application Ideas

  • Place an order with a subtotal of $99 or more and enter web coupon code FREECAN at checkout and you’ll get a free set of can style beer glasses from William’s Brewing.
  • No need to add the glasses to your cart.  Just use the coupon code and they will be automatically added at checkout.

William’s Nucleated Beer Can Glass – remember coupon code FREECAN

Some Items to Consider Purchasing…

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:wmsbuyageta

Extended, Ends Today: DuoTight Ball Lock Keg Faucet – on sale for $8.99 at William’s Brewing + Freebie Offer

DuoTight Keg Faucet

DuoTight Keg Faucet – This ball lock keg faucet fits the OUT fitting on any ball lock keg, and lets you dispense directly from the keg. Lightweight, compact, and easy to use.

Kegland’s DuoTight Fittings are designed to work with EVABarrier Double Wall Tubing.  They offer quick, reliable connections, easy implementation, a variety of fitting options and feature amazing versatility.  They’re also, generally speaking, very well priced.  DuoTights are push to connect fittings and require no tubing clamps.

Related: Hands on Review: Kegland DuoTight Ball Lock QDs!

This features DuoTight gear but it’s standalone, so you don’t really need any other Duotights to use this

  • For a limited time William’s Brewing has these on sale for just $8.99.
  • Shipping is free or reasonably priced flat rate to addresses in the contiguous US depending on your order size for most items.

DuoTight Keg Faucet

Related: Kegland DuoTight Fittings and Accessories!

+ Get a Freebie w/Qualifying Order

  • Place an order with a subtotal of $99 or more and enter web coupon code FREECAN at checkout and you’ll get a free set of can style beer glasses from William’s Brewing.
  • No need to add the glasses to your cart.  Just use the coupon code and they will be automatically added at checkout.

William’s Nucleated Beer Can Glass – remember coupon code FREECAN

duotightreview

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

KegLand Bucket Blaster… $54.99 at William’s Brewing

KegLand Bucket Blaster

KegLand Bucket Blaster via William’s Brewing

More Info

From the product description, check product page for current description, price and availability:

The KegLand Bucket Blaster will clean kegs, carboys, and fermenters with a steady stream of cleanser or sanitizer while you are free to do other things. Just set up the 3 1/2 bucket basin and fill with your sanitizer or cleanser solution, set a keg or carboy over the jet, and plug in to let the pump continuously rinse. Includes gas and beer ball lock disconnects with tubing so you can hook up a keg and have it continuously rinsed.

For safety, always plug into a GFCI plug. We recommend the use of Brewer’s Edge, PBW, or Saniclean cleansers in this unit, as Star San will foam excessively.


 

KegLand Bucket Blaster

Check sale or product page for current availability & pricing

Grab Some PBW…


This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

Bay Area, California: Beverage Grade CO2 Tank Exchange

san francisco oakland co2 tank exchange


About Local Finds: Over 85% of our readers want to see at least some local finds. Because of that, Homebrew Finds will, occasionally, publish finds that are available in select areas.

For easy identification of local finds, the name of the locale will be included in the title of the post. Generally, no more than one local find will be published each day.

Got a find, local, national or intergalactic? Submit a Tip!


  • William’s Brewing is offering economical CO2 tank exchange in the Bay Area.
  • Order online and pickup/exchange at their San Leandro location.
  • This is BEVERAGE grade CO2.
  • Order online to reserve yours and pickup in store.

C02 Cylinder Exchange

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. rp:wmstankexchange

William’s Brewing Homebrew Kit Sale + Get a Freebie

  • Buy two or more William’s Brewing Homebrew Kits (mix and match is okay) and save 15%
  • Shipping is free or reasonably priced flat rate to addresses in the contiguous US depending on your order size for most items.
  • No coupon code is required, add to cart to see discounted price.

William’s Brewing Recipe Kit Sale

+ Get a FREEBIE…

  • Place an order with a subtotal of $99 or more and enter web coupon code P46 at checkout and you’ll get a free William’s Brewing Hat. Normally $29.99.
  • No need to add the hat to your cart.  Just use the coupon code and it will be automatically added at checkout.

William’s Brewing Hat – remember coupon code P46

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.