From the product description, check product page for current description, price and availability:

Do you want to keep it simple and just get a commercial keg of beer and dispense? This kit converts any Sankey coupler to an air pump beer dispenser. Keep in mind if you pump a keg with air, the beer will oxidize if left for more than a couple days, so this tap should be used for parties only.

Does not include needed Sankey Coupler, virtually any brand Sankey coupler will work.

From the product description, check product page for current description, price and availability:

This brass fitting will convert your C02 tank valve into a valve with a permanent sealing O ring. No more need to buy fiber or plastic tank sealing washers.

Installs in any CGA-320 C02 valve that has female threads in the center of the outlet. Use a 5/32″ hex key to screw this in.

Important: Before ordering, check to see if the C02 valve’s outlet hole on your cylinder has female threads. If it does this will work, if the hole is smooth without threads, this will not fit.

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

From the product description, check product page for current description, price and availability:

Do you having a kegging system with beer faucet, and want to bottle kegged beer? The Nukatap Counter Pressure Bottle Filler is an easy way to fill bottles directly from your beer faucet while preserving carbonation in the bottle. The O ring sealed beer inlet nipple press fits into any beer faucet with 10.0 mm inner diameter spout/nozzle including Nukatap, Intertap, Perlick Forward Seal, and Ventmatic faucets.

For the gas inlet side, a male ball lock fitting is provided, so you can use any ball lock gas connector to attach the C02 purging gas. This gas should be at the same pressure as your kegerator dispensing gas, and should be connected to your kegerator C02 regulator. Not Included: you will need a spare gas line from your regulator kegging system with a female ball lock on it to connect your purging C02 gas.

The integrated counter pressure relief valve gives you control of the counter pressure and thus the filling speed. How fast the bottle can be filled without too much foaming depends on CO2 level, beer temperature and bottle temperature. Keep everything cold for the best results.

Fits all 16 ounce and 32 ounce ‘Grolsch’ style swing top bottles.

From the product description, check product page for current description, price and availability:

This molded male ball lock valve coupling cap that fits a 2 liter or smaller plastic soda bottle with a 28mm screw cap lid. This allows the 2 liter bottle to be charged with C02 from any female ball lock gas fitting (like our item D32 or D03 Gas Connector), carbonating the cold beverage in the bottle. Great for serving draft beer away from the keg. Also fits the Brewzilla in and out ports on the lid, and the Brewzilla Collection Jar ports for pressurizing the Brewzilla fermenter. The hose barb on the bottom is also compatible with our DuoTight fitting Z84 and C55 which lets you easily attach a ball lock fitting to an EvaBarrier 8mm or 9mm outer diameter line.

This has a hybrid ball lock post that will accept beer and gas lines.

IMPORTANT SAFETY WARNING: FOR USE ON PLASTIC SODA BOTTLES AND BREWZILLA ONLY, NEVER USE ON GLASS BOTTLES

From the product description, check product page for current description, price and availability:

Make a ball lock keg out out of PET plastic bottles. Great for taking beer to a party or making your own mini keg system with a 2 liter soda bottle.

This tee piece enables you to attach both a liquid and gas ball lock disconnect to the bottle at the same time so you can essencially use a common PET bottle as a keg. Very handy with a two liter soda bottle, as you can get a short length of ¼” interior diameter silicone tubing, attach it to the top Carbonation Cap (not included), fill with beer, and put in the refrigerator, either upright or sideways.

Or if you have Nukatap or Intertap faucets on your draft system, make a draft system cleaner – fill a soda bottle with beer line cleaner, attach an optional ball lock adapter to the end of your Intertap/Nukatap Faucet, and open the faucet to force cleanser into your draft beer system and down the lines.

Note: This is for the tee piece only. You need a soda bottle with standard PCO 1881 thread, 2 item C35 Carbonation Caps, and some ¼” interior diameter tubing to complete your soda bottle keg conversion.

From the product description, check product page for current description, price and availability:

Are you looking for something more than the Series X line of Kegerators? Our Stainless Grand Deluxe 3 models are commercial grade, and perfect for commercial use or your ultimate man cave. This 60″ long model can hold 3 full sized 15.5 gallon kegs, and up to twelve 5 gallon Corny style kegs. It features a built in stainless drip tray with drain, and hole for one optional 4 faucet T tower.

• Liftgate truck delivery cost included to the lower 48 states!

• 304 stainless steel countertops with thick insulating core foam

• Complete stainless finish on sides and back

• Two double glazed safety glass doors with locks and keys included

• Exterior LED light switch to show off your products

• Built in countersunk stainless drip tray system with drain installed to bottom of unit

• 2 rubberised steel wire racks that are removeable and adjustable

• 4 heavy duty caster wheels (not fitted, adjustable feet are installed on arrival)

• Rated to operate in ambient temperatures up to 86° F.

• Switchable Digital Centigrade/Fahrenheit thermostat with adjustable differential

• Thermostat can be programmed to have a wide temperature range so you can use this as a wine celler or fermentation chamber

• Two holes filled with foam on the right side can be drilled out for gas in hoses

• Integral tower cooling fan with cooling hose to route up into your beer tower

• One year warranty

Dimensions and Specifications:

External: 59″ (L) x 28″ (W) x 36″ (H) [without included 4″ caster wheels]

Internal: 45.5″ (L) x 21.5″ (D) x 30.5″ (H)

Power Consumption: 2.8 amps at 110 volts

Weight: 284 lbs. shipping weight, 251 lbs. unboxed

Please Read:

1. You may want to adjust the differential of the included Dixell XR03CX controller. The differential is the amount of time the control waits after cooling to the target temperature before restarting the compressor. A higher differential gives you a wider temperature range and less wear on the compressor, while a lower differential makes for a very narrow temperature with more wear on the compressor. This is done by programming the temperature control on the front panel. This commercial grade control is very versatile and will let you fine tune your refrigerator to your specifications, but not very intuitive. Click here for a manual.

2. This is a commercial grade appliance with a high level of cooling performance. The powerful fans in this unit are louder than the smaller Series X Kegerators

3. These commercial grade fridges have been handcrafted and may have some light cosmetic scratches or dings/dents which is normal

4. This unit is free standing and should not be built in to a countertop to prevent overheating.

5. This unit does not have a plug for the beer tower. You will need to purchase a beer tower to plug the top tower hole. All our Nukatap towers will fit.

6. This unit ships by truck freight on a pallet and weighs 284 lbs palletized, 251 lbs when unboxed. The trucker will lower it out of the truck, but it is your responsibility to move it to its final location.

From the product description, check product page for current description, price and availability:

Many home made products can greatly be improved with perfect temperature control. The Rapt Temperature Controlled Fermentation Chamber gives you an efficient means of setting, monitoring and controlling temperature, which is perfect for beer and wine making, salami making, leavening bread, fermenting yogurt, kombucha, germinating seeds, growing sprouts, kimchi, sauerkraut, olives, cheese, making spirit washes, mushroom growing, and more. Accurate temp control is the key to getting reliable and repeatable results.

The control panel comes complete with an integrated color TFT screen, the integrated secondary regulator that can be used to regulate gas into the chamber with our Inline Regulator with an integrated gauge or alternatively this can be switched over to the Gauge integrated BlowTie unit to regulate residual pressure in your fermenter. The 4 button color display conveniently shows a log of historic temperature graphs, allows you to start, set/stop temperature profiles and gives you access to other critical information for that particular fermentation.

The top of the unit also has room to install an optional item C16 Spunding Valve and or item C11 Mini Regulator, so you can ferment under pressure and not cut any holes in the unit for hoses. See Kee’s video below for more on this.

This multi purpose chamber can also be used as a kegerator. In particularly cold climates where the ambient temp is below zero, this chamber can warm your kegs and prevent them from freezing. This chamber also has a higher keg storage capacity than a conventional kegerator that takes up the same footprint. This unit can hold four 5 gallon Ball lock kegs on the floor and has enough headroom that you can also fit another layer of four 2½ gallon ball lock size kegs above this. A provision for keg faucets is not included, so you would have to drill holes in the door if you decided to use this as a tall kegerator.

What is RAPT?

RAPT is a dedicated Internet of Things (IOT) Hub for fermentation logging and control. It’s a free service whereby any RAPT enabled product can both log and store data to the hub where you can conveniently access this data. The RAPT hub can also allow you to control your devices remotely giving you control of the device regardless of where you are.

For more information on the portal, and how to create a free account, click HERE.

The RAPT portal enables you to make complex temperature profiles that involve different temperature settings over time. This means you can start/run a temperature profile that is fully automated, and you can also use the app to monitor and or change a temperature setting remotely. It even interfaces with the RAPT Pill floating hydrometer to give you real time specific gravity readings remotely. Note that the KegLand RAPT Pill hydrometer is currently not available in the USA, but can be ordered for USA delivery through AliExpress.

The RAPT Chamber is not compatible with the Barron Tilt Bluetooth Hydrometer, although you can of course still use a Tilt with this, it will just not interface with the RAPT portal.

Specifications:

• Integrated Heating: 50watt Heating Power
• Cooling Capacity: 300watt Cooling Power
• Max Power Consumption: 225 Watts
• Refrigerant: r600a
• Connectivity: Wifi (802.11) and Bluetooth
• Temperature accuracy: +/- 0.1C
• Temp Resolution: 0.1C
• Integrated Screen: 2.8inch (diagonal) Color LCD
• Interior Temperature Range: 29°F to 100°F
• External Dimensions:
• Width: 22″
• Depth: 24″
• Height: 70″
• Internal Dimensions:
• Width: 17¼”
• Depth: 19½”
• Height: 55″

Why buy this over a glycol chiller?

Typically in the past, some customers have needed to resort to glycol chillers to chill fermenters but this represents several issues:

1. Glycol chillers often require a very cold liquid to enter into a fermenter causing an excessively cold part in the fermenter core.

2. Glycol chillers consume significant amounts of power and in most instances more than double what the RAPT chamber would consume.

3. Glycol chillers often result in spilling sticky glycol especially when hoses are connected and disconnected to the fermenter.

4. Glycol chillers generally require penetrations through the walls/lid of the fermenter making the fermenter less sanitary and requiring more cleaning.

5. Many glycol chillers and fermenter combinations do not have sufficient power or are not well enough insulated to cool to sub-zero temperatures. So crash chilling is not possible. This is a significant compromise to a temperature-controlled solution and also results in less ability to clarify the finished beer.

From the product description, check product page for current description, price and availability:

Upgrade your FermZilla All Rounder or Tri-Conical with the 2 Inch Tri-Clover Lid from KegLand. Add yeast, hops or even take samples from a wine thief from the top and not have to remove the entire lid. This particular lid was designed so you can dry hop without exposing the batch to oxygen by opening the lid. By using this lid in conjunction with the FermZilla 2″ Butterfly Valve and Hop Bong Kit, you would be able to purge CO2 into the tube and expel all the oxygen before adding hops.

Features:

2 x PCO1881 Male Ports – Recommended to be used with 1 x Red Ball Lock Cap (item C35) and 1 x Yellow Ball Lock Cap (item D80).

1 x Pressure Relief Valve Port – Includes Red 35psi Pressure Relief Valve

1 x 2 Inch Tri-Clover Ferrule

Undrilled Ports:

1 x Thermowell Port (8mm duotight x 1/4″ bulkhead) Suitable for 60cm Thermowell duotight Kit.

2 x Ice Water / Glycol Temp Twister Ports (9.5mm duotight x 1/2″ bulkheads).

Please Note: Temp Twister will need to be bent on a 20° Angle in order to fit on the curved lid and align vertically in the tank.

Also includes:

1 x KL23627 2 Inch Tri-Clover x PCO1881 Male Thread with PCO1881 Bottle Cap

1 x KL03322 2 Inch Tri-Clover Clamp

1 x KL03438 2 Inch Tri-Clover Beaded Silicone Seal

Important:

Release the pressure completely before opening the 2″ Tri-Clover.

Only use KegLand Red 35psi / 2.5 bar PRV or KegLand Yellow 17psi / 1.5bar PRV’s with this lid. Ensure they are cleaned and dried of sticky residue before each fermentation. Failure to do so could cause injury and void warranty.