From the product description, check product page for current description, price and availability:

Do you want to keep it simple and just get a commercial keg of beer and dispense? This kit converts any Sankey coupler to an air pump beer dispenser. Keep in mind if you pump a keg with air, the beer will oxidize if left for more than a couple days, so this tap should be used for parties only.

Does not include needed Sankey Coupler, virtually any brand Sankey coupler will work.

From the product description, check product page for current description, price and availability:

Do you having a kegging system with beer faucet, and want to bottle kegged beer? The Nukatap Counter Pressure Bottle Filler is an easy way to fill bottles directly from your beer faucet while preserving carbonation in the bottle. The O ring sealed beer inlet nipple press fits into any beer faucet with 10.0 mm inner diameter spout/nozzle including Nukatap, Intertap, Perlick Forward Seal, and Ventmatic faucets.

For the gas inlet side, a male ball lock fitting is provided, so you can use any ball lock gas connector to attach the C02 purging gas. This gas should be at the same pressure as your kegerator dispensing gas, and should be connected to your kegerator C02 regulator. Not Included: you will need a spare gas line from your regulator kegging system with a female ball lock on it to connect your purging C02 gas.

The integrated counter pressure relief valve gives you control of the counter pressure and thus the filling speed. How fast the bottle can be filled without too much foaming depends on CO2 level, beer temperature and bottle temperature. Keep everything cold for the best results.

Fits all 16 ounce and 32 ounce ‘Grolsch’ style swing top bottles.

From the product description, check product page for current description, price and availability:

Do you want to keep it simple and just get a commercial keg of beer and dispense? This kit converts any Sankey coupler to an air pump beer dispenser. Keep in mind if you pump a keg with air, the beer will oxidize if left for more than a couple days, so this tap should be used for parties only.

Does not include needed Sankey Coupler, virtually any brand Sankey coupler will work.

From the product description, check product page for current description, price and availability:

Do you having a kegging system with beer faucet, and want to bottle kegged beer? The Nukatap Counter Pressure Bottle Filler is an easy way to fill bottles directly from your beer faucet while preserving carbonation in the bottle. The O ring sealed beer inlet nipple press fits into any beer faucet with 10.0 mm inner diameter spout/nozzle including Nukatap, Intertap, Perlick Forward Seal, and Ventmatic faucets.

For the gas inlet side, a male ball lock fitting is provided, so you can use any ball lock gas connector to attach the C02 purging gas. This gas should be at the same pressure as your kegerator dispensing gas, and should be connected to your kegerator C02 regulator. Not Included: you will need a spare gas line from your regulator kegging system with a female ball lock on it to connect your purging C02 gas.

The integrated counter pressure relief valve gives you control of the counter pressure and thus the filling speed. How fast the bottle can be filled without too much foaming depends on CO2 level, beer temperature and bottle temperature. Keep everything cold for the best results.

Fits all 16 ounce and 32 ounce ‘Grolsch’ style swing top bottles.

From the product description, check product page for current description, price and availability:

Do you want to keep it simple and just get a commercial keg of beer and dispense? This kit converts any Sankey coupler to an air pump beer dispenser. Keep in mind if you pump a keg with air, the beer will oxidize if left for more than a couple days, so this tap should be used for parties only.

Does not include needed Sankey Coupler, virtually any brand Sankey coupler will work.

From the product description, check product page for current description, price and availability:

Do you having a kegging system with beer faucet, and want to bottle kegged beer? The Nukatap Counter Pressure Bottle Filler is an easy way to fill bottles directly from your beer faucet while preserving carbonation in the bottle. The O ring sealed beer inlet nipple press fits into any beer faucet with 10.0 mm inner diameter spout/nozzle including Nukatap, Intertap, Perlick Forward Seal, and Ventmatic faucets.

For the gas inlet side, a male ball lock fitting is provided, so you can use any ball lock gas connector to attach the C02 purging gas. This gas should be at the same pressure as your kegerator dispensing gas, and should be connected to your kegerator C02 regulator. Not Included: you will need a spare gas line from your regulator kegging system with a female ball lock on it to connect your purging C02 gas.

The integrated counter pressure relief valve gives you control of the counter pressure and thus the filling speed. How fast the bottle can be filled without too much foaming depends on CO2 level, beer temperature and bottle temperature. Keep everything cold for the best results.

Fits all 16 ounce and 32 ounce ‘Grolsch’ style swing top bottles.

From the product description, check product page for current description, price and availability:

Many home made products can greatly be improved with perfect temperature control. The Rapt Temperature Controlled Fermentation Chamber gives you an efficient means of setting, monitoring and controlling temperature, which is perfect for beer and wine making, salami making, leavening bread, fermenting yogurt, kombucha, germinating seeds, growing sprouts, kimchi, sauerkraut, olives, cheese, making spirit washes, mushroom growing, and more. Accurate temp control is the key to getting reliable and repeatable results.

The control panel comes complete with an integrated color TFT screen, the integrated secondary regulator that can be used to regulate gas into the chamber with our Inline Regulator with an integrated gauge or alternatively this can be switched over to the Gauge integrated BlowTie unit to regulate residual pressure in your fermenter. The 4 button color display conveniently shows a log of historic temperature graphs, allows you to start, set/stop temperature profiles and gives you access to other critical information for that particular fermentation.

The top of the unit also has room to install an optional item C16 Spunding Valve and or item C11 Mini Regulator, so you can ferment under pressure and not cut any holes in the unit for hoses. See Kee’s video below for more on this.

This multi purpose chamber can also be used as a kegerator. In particularly cold climates where the ambient temp is below zero, this chamber can warm your kegs and prevent them from freezing. This chamber also has a higher keg storage capacity than a conventional kegerator that takes up the same footprint. This unit can hold four 5 gallon Ball lock kegs on the floor and has enough headroom that you can also fit another layer of four 2½ gallon ball lock size kegs above this. A provision for keg faucets is not included, so you would have to drill holes in the door if you decided to use this as a tall kegerator.

What is RAPT?

RAPT is a dedicated Internet of Things (IOT) Hub for fermentation logging and control. It’s a free service whereby any RAPT enabled product can both log and store data to the hub where you can conveniently access this data. The RAPT hub can also allow you to control your devices remotely giving you control of the device regardless of where you are.

For more information on the portal, and how to create a free account, click HERE.

The RAPT portal enables you to make complex temperature profiles that involve different temperature settings over time. This means you can start/run a temperature profile that is fully automated, and you can also use the app to monitor and or change a temperature setting remotely. It even interfaces with the RAPT Pill floating hydrometer to give you real time specific gravity readings remotely. Note that the KegLand RAPT Pill hydrometer is currently not available in the USA, but can be ordered for USA delivery through AliExpress.

The RAPT Chamber is not compatible with the Barron Tilt Bluetooth Hydrometer, although you can of course still use a Tilt with this, it will just not interface with the RAPT portal.

Specifications:

• Integrated Heating: 50watt Heating Power
• Cooling Capacity: 300watt Cooling Power
• Max Power Consumption: 225 Watts
• Refrigerant: r600a
• Connectivity: Wifi (802.11) and Bluetooth
• Temperature accuracy: +/- 0.1C
• Temp Resolution: 0.1C
• Integrated Screen: 2.8inch (diagonal) Color LCD
• Interior Temperature Range: 29°F to 100°F
• External Dimensions:
• Width: 22″
• Depth: 24″
• Height: 70″
• Internal Dimensions:
• Width: 17¼”
• Depth: 19½”
• Height: 55″

Why buy this over a glycol chiller?

Typically in the past, some customers have needed to resort to glycol chillers to chill fermenters but this represents several issues:

1. Glycol chillers often require a very cold liquid to enter into a fermenter causing an excessively cold part in the fermenter core.

2. Glycol chillers consume significant amounts of power and in most instances more than double what the RAPT chamber would consume.

3. Glycol chillers often result in spilling sticky glycol especially when hoses are connected and disconnected to the fermenter.

4. Glycol chillers generally require penetrations through the walls/lid of the fermenter making the fermenter less sanitary and requiring more cleaning.

5. Many glycol chillers and fermenter combinations do not have sufficient power or are not well enough insulated to cool to sub-zero temperatures. So crash chilling is not possible. This is a significant compromise to a temperature-controlled solution and also results in less ability to clarify the finished beer.

From the product description, check product page for current description, price and availability:

Many home made products can greatly be improved with perfect temperature control. The Rapt Temperature Controlled Fermentation Chamber gives you an efficient means of setting, monitoring and controlling temperature, which is perfect for beer and wine making, salami making, leavening bread, fermenting yogurt, kombucha, germinating seeds, growing sprouts, kimchi, sauerkraut, olives, cheese, making spirit washes, mushroom growing, and more. Accurate temp control is the key to getting reliable and repeatable results.

The control panel comes complete with an integrated color TFT screen, the integrated secondary regulator that can be used to regulate gas into the chamber with our Inline Regulator with an integrated gauge or alternatively this can be switched over to the Gauge integrated BlowTie unit to regulate residual pressure in your fermenter. The 4 button color display conveniently shows a log of historic temperature graphs, allows you to start, set/stop temperature profiles and gives you access to other critical information for that particular fermentation.

The top of the unit also has room to install an optional item C16 Spunding Valve and or item C11 Mini Regulator, so you can ferment under pressure and not cut any holes in the unit for hoses. See Kee’s video below for more on this.

This multi purpose chamber can also be used as a kegerator. In particularly cold climates where the ambient temp is below zero, this chamber can warm your kegs and prevent them from freezing. This chamber also has a higher keg storage capacity than a conventional kegerator that takes up the same footprint. This unit can hold four 5 gallon Ball lock kegs on the floor and has enough headroom that you can also fit another layer of four 2½ gallon ball lock size kegs above this. A provision for keg faucets is not included, so you would have to drill holes in the door if you decided to use this as a tall kegerator.

What is RAPT?

RAPT is a dedicated Internet of Things (IOT) Hub for fermentation logging and control. It’s a free service whereby any RAPT enabled product can both log and store data to the hub where you can conveniently access this data. The RAPT hub can also allow you to control your devices remotely giving you control of the device regardless of where you are.

For more information on the portal, and how to create a free account, click HERE.

The RAPT portal enables you to make complex temperature profiles that involve different temperature settings over time. This means you can start/run a temperature profile that is fully automated, and you can also use the app to monitor and or change a temperature setting remotely. It even interfaces with the RAPT Pill floating hydrometer to give you real time specific gravity readings remotely. Note that the KegLand RAPT Pill hydrometer is currently not available in the USA, but can be ordered for USA delivery through AliExpress.

The RAPT Chamber is not compatible with the Barron Tilt Bluetooth Hydrometer, although you can of course still use a Tilt with this, it will just not interface with the RAPT portal.

Specifications:

• Integrated Heating: 50watt Heating Power
• Cooling Capacity: 300watt Cooling Power
• Max Power Consumption: 225 Watts
• Refrigerant: r600a
• Connectivity: Wifi (802.11) and Bluetooth
• Temperature accuracy: +/- 0.1C
• Temp Resolution: 0.1C
• Integrated Screen: 2.8inch (diagonal) Color LCD
• Interior Temperature Range: 29°F to 100°F
• External Dimensions:
• Width: 22″
• Depth: 24″
• Height: 70″
• Internal Dimensions:
• Width: 17¼”
• Depth: 19½”
• Height: 55″

Why buy this over a glycol chiller?

Typically in the past, some customers have needed to resort to glycol chillers to chill fermenters but this represents several issues:

1. Glycol chillers often require a very cold liquid to enter into a fermenter causing an excessively cold part in the fermenter core.

2. Glycol chillers consume significant amounts of power and in most instances more than double what the RAPT chamber would consume.

3. Glycol chillers often result in spilling sticky glycol especially when hoses are connected and disconnected to the fermenter.

4. Glycol chillers generally require penetrations through the walls/lid of the fermenter making the fermenter less sanitary and requiring more cleaning.

5. Many glycol chillers and fermenter combinations do not have sufficient power or are not well enough insulated to cool to sub-zero temperatures. So crash chilling is not possible. This is a significant compromise to a temperature-controlled solution and also results in less ability to clarify the finished beer.

From the product description, check product page for current description, price and availability:

Upgrade your FermZilla All Rounder or Tri-Conical with the 2 Inch Tri-Clover Lid from KegLand. Add yeast, hops or even take samples from a wine thief from the top and not have to remove the entire lid. This particular lid was designed so you can dry hop without exposing the batch to oxygen by opening the lid. By using this lid in conjunction with the FermZilla 2″ Butterfly Valve and Hop Bong Kit, you would be able to purge CO2 into the tube and expel all the oxygen before adding hops.

Features:

2 x PCO1881 Male Ports – Recommended to be used with 1 x Red Ball Lock Cap (item C35) and 1 x Yellow Ball Lock Cap (item D80).

1 x Pressure Relief Valve Port – Includes Red 35psi Pressure Relief Valve

1 x 2 Inch Tri-Clover Ferrule

Undrilled Ports:

1 x Thermowell Port (8mm duotight x 1/4″ bulkhead) Suitable for 60cm Thermowell duotight Kit.

2 x Ice Water / Glycol Temp Twister Ports (9.5mm duotight x 1/2″ bulkheads).

Please Note: Temp Twister will need to be bent on a 20° Angle in order to fit on the curved lid and align vertically in the tank.

Also includes:

1 x KL23627 2 Inch Tri-Clover x PCO1881 Male Thread with PCO1881 Bottle Cap

1 x KL03322 2 Inch Tri-Clover Clamp

1 x KL03438 2 Inch Tri-Clover Beaded Silicone Seal

Important:

Release the pressure completely before opening the 2″ Tri-Clover.

Only use KegLand Red 35psi / 2.5 bar PRV or KegLand Yellow 17psi / 1.5bar PRV’s with this lid. Ensure they are cleaned and dried of sticky residue before each fermentation. Failure to do so could cause injury and void warranty.

From the product description, check product page for current description, price and availability:

These 16 gram cartridges fits our Micro Regulators and most Cartridge Injectors that use 16 gram cartridges. Filled with pure CO2 suitable for beer use, they also fit most bicycle pump type injectors that take 16 gram threaded cartridges. These are 3.25″ long, .732″ diameter, with a neck threading of 3/8-24. These also fit the simple ‘bicycle type’ inflators that use 16 gram unthreaded cartridges. Does not fit the Core 360 Regulator. Box of 10.

Product of Hungary.

RESTRICTED SHIPPING- Ground shipment only, air shipment not allowed.

From the product description, check product page for current description, price and availability:

Perfect heating solution for those who want even coverage and certainty that their PET fermenter will not melt even if the fermenter is empty. Features Velcro straps to hold the blanket firmly in place. Ultra low density 30 watt element is spread out along the entire length and width of the heating belt, preventing hot spots and providing even low density heat.

Using 30 watts, this heating wrap belt is great when paired with insulation and a thermostat like our item P40 RAPT Temperature Controller or item Q91 KegLand MKII Dual Plug Control. Plugs into any 110 volt outlet. Fits all KegLand Fermzilla models, as well as carboys and plastic bucket style fermenters.

39″ long, 9¾” tall.