Category Archives: Kegerator

EdgeStar BR1000SS Stainless Steel Kegerator – Ready for Conversion

EdgeStar BR1000SS Refrigerator for Kegerator Conversion

EdgeStar BR1000SS Refrigerator for Kegerator Conversion

More Info
Highlighted Features
  • Temperature range: 32 - 46°F; Internal circulation fan; Drip tray included; Digital thermostat
  • Integrated lock system; Recessed door handle; CSA listed for electrical safety
  • Storage capacity options: One (1) sixth barrel keg or one (1) Cornelius keg
  • Not compatible with casters; Size: 3.2 cu. ft.; Input voltage: 115 V/60 Hz
  • Same refrigerator unit included with KC1000SS EdgeStar Craft Brew Kegerator
Learn More

 

The good thing about this kegerator is that the final parts aren’t included. This means you get to outfit it as you like without paying for something that you’re not going to use.

EdgeStar BR1000SS Refrigerator for Kegerator Conversion – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

keg deals
kegdeals

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources
standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Inkbird ITC-308 WiFi Digital Dual Stage Temp Controller

ITC-308 Dual Stage, Pre-Wired Digital Temperature Controller with WI-FI by Inkbird

ITC-308 Dual Stage, Pre-Wired Digital Temperature Controller with WI-FI by Inkbird

More Info


Highlighted Features
  • WIFI smart controller: Supports both IOS and Android; WIFI connection supports 2.4 GHz Wi-Fi with INKBIRD APP to control the temperature remotely
  • Dual Relay Outputs: the controller will turn on/off refrigeration and heating equipment as conditions change
  • High and Low-Temperature Alarm: The controller will alarm when the temperature reaches the preset temperatures or the sensor experiences a malfunction
  • Convenient Design: Plug-n-play, easy to use; support Celsius or Fahrenheit reading, as well as temperature calibration
  • Maximum output load: 1100 W (110 V)
  • Calibration and Compressor Delay: Supports temperature calibration and compressor delay which can protect your refrigeration
Learn More

 

This controller can control both a heating and cooling device.  Alternatively, it can control a heating or a cooling device.

In my opinion the original ITC-308 was and is a game changer as far as homebrew temp controllers.  In comparison to available controllers available at the time the ITC-308 was released, it offered loads more features, including dual stage control, for a fraction of the price.  Game changer!  The addition of Wi-Fi control and monitoring to this great controller has made a great temp controller even better.  Check out our Hands on Review of the ITC-308.  That includes a section on the WiFi version.

Inkbird WiFi ITC-308 Digital Temperature Controller Thermostat Remote Monitoring Controlling Home Brewing Fermentation Breeding Incubation Greenhouse – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Updated: 5/3/2024

Inkbird WiFi ITC-308...image
Inkbird WiFi ITC-308 Digital Temperature Controller Thermostat Remote Monitoring Controlling Home Brewing Fermentation Breeding Incubation Greenhouse
$49.99 -$2.48 $47.51

Also: Yeast Starters & Fermentation | Kegerator Tips & Gear | Inkbird ITC308 Review

Photo
Inkbird ITC-308 Digital...image
Inkbird WiFi ITC-308...image
Johnson Controls A421ABG-02C...image
Title
Inkbird ITC-308 Digital Temperature Controller 2-Stage Outlet Thermostat Heating and Cooling Mode Carboy Homebrew Fermenter Greenhouse Terrarium 110V 10A
Inkbird WiFi ITC-308 Digital Temperature Controller Thermostat Remote Monitoring Controlling Home Brewing Fermentation Breeding Incubation Greenhouse
Johnson Controls A421ABG-02C A421 Series Electronic Temperature Control with Pre Wired Power Cord, -40 to 212 Degree F Temperature Range,Silver
Prime Status
Price
$35.00
$49.99
$152.79
Buy Now
Photo
Inkbird ITC-308 Digital...image
Title
Inkbird ITC-308 Digital Temperature Controller 2-Stage Outlet Thermostat Heating and Cooling Mode Carboy Homebrew Fermenter Greenhouse Terrarium 110V 10A
Prime Status
Price
$35.00
Buy Now
Photo
Inkbird WiFi ITC-308...image
Title
Inkbird WiFi ITC-308 Digital Temperature Controller Thermostat Remote Monitoring Controlling Home Brewing Fermentation Breeding Incubation Greenhouse
Prime Status
Price
$49.99
Buy Now
Photo
Johnson Controls A421ABG-02C...image
Title
Johnson Controls A421ABG-02C A421 Series Electronic Temperature Control with Pre Wired Power Cord, -40 to 212 Degree F Temperature Range,Silver
Prime Status
Price
$152.79
Buy Now

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. ssprod:B07PVBG8K1:ptr

Hands on Review: Kegland DuoTight Fittings & EVABarrier Tubing

Updated: 6/13/2024

Kegland’s DuoTight Fittings are designed to work with EVABarrier Double Wall Tubing.  They offer quick, reliable connections, easy implementation, a variety of fitting options and feature amazing versatility.  They’re also, generally speaking, very well priced.  DuoTights are push to connect fittings and require no tubing clamps.

In This Review:

  • How to Use DuoTight Fittings – No Tools or Clamps Needed!
  • DuoTight and EVABarrier Sizing
  • A Closer Look at DuoTight Fittings, EVABarrier Tubing and Related Tools
  • DuoTight Compatible Locking Clips
  • More About EVABarrier Double Wall Tubing
  • EVABarrier Tubing Resistance Estimations
  • Beer Line Tidy for EVABarrier Tubing
  • Does EVABarrier Tubing Work with John Guest Fittings?
  • Converting My Kegerator to DuoTights and EVABarrier
  • Tips for skipping ball valves in your DuoTight Setup
  • A Tweak For Super Clean DuoTight Kegerator Installs
  • Build a DuoTight CO2 Gas Manifold
  • Kegland DuoTight Ball Lock QDs
  • Pressure Tests
  • What is the Maximum Pressure for DuoTight Fittings?
  • Nukatap Counter Pressure Bottle Filler
  • DuoTight Inline Secondary Regulators
  • BlowTie Spunding Valves
  • Leaks? Troubleshooting EVABarrier/DuoTight Leaks
  • Conclusions
  • More Interesting and Unique DuoTight Compatible Fittings & Gear

Announcing: DuoTight Conversion for Tapcooler

tapcooler duotight

The Tapcooler can connect directly to your compatible forward sealing faucet (Ultratap, Vent-Matic, Perlick 600 series, Nukatap and Intertap) and allows you to easily counter fill bottles directly from the tap!

Learn More about the Tapcooler!  Hands on Review: Tapcooler Counter Pressure Bottle Filler for Forward Sealing Faucets!

OR Nukatap Counter Pressure Filler

The new fitting for Tapcooler makes a lot of sense of you already own a Tapcooler. If you don’t but are in the market for something similar that includes native DuoTight capabilities consider the Nukatap’s Counter Pressure Bottle Filler

How to Use DuoTight Fittings – No Tools or Clamps Needed!

DuoTights feature a unique double EPDM O-ring design.  Coupling and uncoupling is quick and easy and requires no tools or clamps.

DuoTight Ball Lock QD on Left, Compatible EVABarrier Tubing on RightMaking a pressure capable connection is as easy as pushing the tubing all the way in the fitting and firmly pulling the tubing out.To disengage the connection press the collar toward the fitting body and pull on the tubing.  A couple tools are available to help with this process.  See below for photos and links.

Finding DuoTight Fittings and EVABarrier Tubing, Review Continues Below:

Continue reading →

Hands on Review: Safecid Beer Line Cleaner

This review is by Homebrew Finds Contributor Brad Probert.  Brad is an engineer, expert homebrewer and experienced reviewer.  Grab a link to Brad’s website at the end of this review.

Safecid Cleaner

Those of us that have kegerators know that cleaning the beer lines is a necessary thing. We also know that cleaning them is a pretty unexciting event. Products for cleaning them are generally unexciting as well because they’re all pretty similar. There is one product that is different- Safecid Beer Line Cleaner.

Check Current Pricing & Availability:

Safecid HAR102 Acid...image
Safecid HAR102 Acid Cleaner 32 Fl Oz - Powerful & Safe Beer Stone Remover - Nontoxic Beer Line Acid Rinse - Low-Foaming Acid Replacement Line Cleaner
$26.95 ($0.84 / Fl Oz)
Safecid CR919 Alkaline...image
Safecid CR919 Alkaline Beer Line Cleaner 32 Fl Oz
$24.95 ($0.78 / Fl Oz)

These are affiliate links. Note that multiple variations of these products may be available, as such a different version may appear at these links

Safecid has both an acid cleaner and an alkaline/caustic cleaner. The cleaners are as potent as other cleaners, but their patented chemistry makes it non-toxic. This means it is neither harmful to people (skin, eyes), nor harmful to the water supply when rinsed down the drain. And that’s what makes it different from other cleaners.

Alkaline Cleaner Distinct Blue Color

See-Through Volume Markings

The Brewer’s Association publishes draft beer cleaning guidelines for bars/breweries. They recommend a cleaning period of every 2 weeks, based on research looking at bacteria build-up in the lines. The research looked at the growth of both aerobic bacteria (leading to sour and vinegar off-flavors) and anaerobic bacteria (leading to butter and caramel off-flavors). This bi-weekly cleaning is to be done with an Alkaline cleaner, and then every 3 months an acid cleaner should be used. The alkaline cleaner deals with organic compounds (bacteria) and the acid cleaner deals with inorganic compounds (beer stone). They point out that the cleaning frequency is not dependent on how much beer is flowed through the lines- busy taps or slow ones alike.

Continue reading →

FLOW CONTROL Stainless Steel Forward Sealing Faucet

Forward Sealing Beer Faucet Flow Control Stainless Steel Craft Beer Tap for Homebrew Beer

Forward Sealing Beer Faucet Flow Control Stainless Steel Craft Beer Tap for Homebrew Beer

More Info


Highlighted Features
  • Forward sealing beer faucet with flow control to reduce foam
  • All stainless steel construction
  • Works with all standard shanks and towers
  • Handle thread: 3/8"-16UNC
  • Body thread: 1 1/8" - 18
Learn More

 

Flow control faucets feature a built in flow compensator that allows you to adjust the resistance your faucet is exerting.  That means less tubing and potentially less foaming and wasted beer. The compensation feature also makes it easier to serve higher carbonation beers as you can set the faucet to provide resistance to offset the increased pressure needed to store and serve these beers at higher pressures.  Instead of replacing your beer line with ever increasing lengths of tubing, you simply turn a knob to increase resistance.

Related: What Does a Flow Control Faucet Do?

Forward Sealing Beer Faucet Flow Control Stainless Steel Craft Beer Tap for Homebrew Beer – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Compare (different manufacturers and models)

Perlick Faucet -...image
Perlick Faucet - Flow Control - Model 650SS
$91.99
KegLand Nukatap Beverage...image
KegLand Nukatap Beverage Faucet | Patented Forward Sealing Design | Flow Control | Stainless Steel | Beer Tap | Interchangeable Spouts
$67.98

Related Reviews: Nukatap Hands on Review & Hands on Review: NukaTap FLOW CONTROL Faucets


intertap faucet review


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Digital CO2 Monitor – Detect Kegerator Leaks! – CO2 Levels, Humidity & Temp

CO2 Monitor | Detector with Air Quality 4-in1 | Carbon Dioxide Detector | Humidity Meter Sensor with Indoor Thermometer | Digital Higrometer for Indoor Humidity and Temperature | Version 2024

CO2 Monitor | Detector with Air Quality 4-in1 | Carbon Dioxide Detector | Humidity Meter Sensor with Indoor Thermometer | Digital Higrometer for Indoor Humidity and Temperature | Version 2024

More Info


Highlighted Features
  • 🔋 UNLEASH UNINTERRUPTED MONITORING - With our CO2 detector superior battery life, forget about constant charging. Embrace the freedom of long-lasting air quality meter tracking!
  • 🎯 ACCURACY REDEFINED - Our air quality sensor isn't just a gadget, it's your personal health guard. Experience precision like never before and trust in the numbers!
  • 🚨 ALARM THAT CARES - Our CO2 detector doesn't just beep, it alerts you to protect your health. Set your own safety thresholds and let it do the rest. ADD TO CARD!
  • 💪 BUILT TO IMPRESS - Our air quality monitor indoor is a masterpiece of durability. Crafted with top-notch materials, it's the reliable sentinel your home deserves.
  • 💰 PREMIUM QUALITY, POCKET-FRIENDLY PRICE - Why compromise when you can have it all? Our CO2 monitor delivers exceptional performance without burning a hole in your pocket.
  • 🌍 YOUR TRAVEL-SIZED HEALTH COMPANION - Home or away, our portable carbon dioxide detector for travel ensures you're always in the know about your air quality.
  • 👌 SIMPLICITY MEETS EFFICIENCY - No fuss, no hassle. Our home air quality monitor is as user-friendly as it gets. Making air quality testing a walk in the park!
  • 🏠🏢 ONE MONITOR, EVERY ENVIRONMENT - Homes, workshops, offices - our air quality tester adapts effortlessly. It's the versatile choice for all your air monitoring needs.
  • 😌 PEACE OF MIND, DELIVERED - With our CO2 detector, breathe easy and live healthily. It's not just a device, it's your ticket to a worry-free lifestyle
  • 🌟 THE ULTIMATE AIR MONITOR - More than just a CO2 monitor, it's a commitment to your health. Make the smart choice today. Your health is worth it!
Learn More

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

This measures three things that make it perfect for keeping a close eye on your kegerator,,,

  • CO2 levels – help spot CO2 leaks in your kegerator. See below
  • Temperature – monitor your kegerator temperature
  • Humidity – Help judge whether your Eva Dry (or similar) needs recharged for the purpose of handling excess kegerator and fermentation chamber wetness.  See: Damp Kegerator? Fix Kegerator Condensation

TACKLY – CO2 Monitor | Detector with Air Quality 4-in1 | Carbon Dioxide Detector | Humidity Meter Sensor with Indoor Thermometer | Digital Higrometer for Indoor Humidity and Temperature | Version 2024 – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Using a layer of defense to detect against kegerator CO2 leaks…

Placing a CO2 Monitor with alarm inside of your kegerator can serve as another line of defense to protect against co2 leaks and loss. CO2 should not be building up in your kegerator. A CO2 monitor with alarm can alert you of this condition.

This is not a replacement for checking for CO2 leaks using traditional methods, rather a another layer that could save you a trip to swap out a CO2 tank.

Related: Step by Step: Finding and Fixing Keg CO2 Leaks

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

VEVOR CO2 Double Gauge Regulator

VEVOR CO2 Double Gauge Regulator, Small, Silver

VEVOR CO2 Double Gauge Regulator, Small, Silver

More Info


Highlighted Features
  • Adjustable Range: The pressure range of the gas meter is adjustable from 0 to 60 PSI, allowing you to freely adjust the intake pressure of carbon dioxide gas, thus controlling the foaming texture of beer and ensuring that the beer-making process and results meet your needs and expectations.
  • Pressure Stability: The pressure relief valve autonomously adjusts the pressure to release at 65 PSI, preventing pressure relief under low pressure. This detail design ensures the quality and quantity of the brewed beer, without being affected by pressure issues.
  • Leak-proof: The gas meter comes with gaskets and clamps, both of which help you secure the gas meter to the beer keg and prevent gas leakage. This design guarantees the stability and reliability of the gas meter.
  • Versatile Compatibility: The carbon dioxide gas meter interface standard is CGA320, compatible with hose calibers of 8mm, making it compatible with various beer kegs. The installation is simple and quick, making your beer-making process more convenient.
  • Backflow Prevention: The gas meter is equipped with a check valve to prevent beer from flowing back due to pressure issues. This design ensures a smoother and more stable beer-making process while also maintaining the cleanliness of the beer keg.
Learn More

 

VEVOR CO2 Double Gauge Regulator – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

VEVOR CO2 Double Gauge Regulator

VEVOR CO2 Double Gauge Regulator, Small, Silver

VEVOR CO2 Double Gauge Regulator, Small, Silver

More Info


Highlighted Features
  • Adjustable Range: The pressure range of the gas meter is adjustable from 0 to 60 PSI, allowing you to freely adjust the intake pressure of carbon dioxide gas, thus controlling the foaming texture of beer and ensuring that the beer-making process and results meet your needs and expectations.
  • Pressure Stability: The pressure relief valve autonomously adjusts the pressure to release at 65 PSI, preventing pressure relief under low pressure. This detail design ensures the quality and quantity of the brewed beer, without being affected by pressure issues.
  • Leak-proof: The gas meter comes with gaskets and clamps, both of which help you secure the gas meter to the beer keg and prevent gas leakage. This design guarantees the stability and reliability of the gas meter.
  • Versatile Compatibility: The carbon dioxide gas meter interface standard is CGA320, compatible with hose calibers of 8mm, making it compatible with various beer kegs. The installation is simple and quick, making your beer-making process more convenient.
  • Backflow Prevention: The gas meter is equipped with a check valve to prevent beer from flowing back due to pressure issues. This design ensures a smoother and more stable beer-making process while also maintaining the cleanliness of the beer keg.
Learn More

 

VEVOR CO2 Double Gauge Regulator – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

waveshare 2.7inch Passive NFC-Powered E-Paper Module + E-Paper Tap Handle Build

waveshare 2.7inch Passive NFC-Powered E-Paper Module No Battery Wireless Powering & Data Transfer Provides Android APP Black and White Display

waveshare 2.7inch Passive NFC-Powered E-Paper

More Info


Highlighted Features
  • No Battery Required, No Messy Wiring
  • Refreshed By Smartphone, Comes With Android APP
  • Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...
  • Black and White Display Colors
Learn More

 

This is a 2.7″ e-paper display that requires no power. I think this would make the basis for a great e-paper kegerator tap handle!

If you put together a build… We’d love to share the details with your fellow homebrewers.  Email us the deets.

What are Other’s Saying?   Search this product’s Amazon reviews for “tap handle” – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

waveshare 2.7inch Passive NFC-Powered E-Paper Module No Battery Wireless Powering & Data Transfer Provides Android APP Black and White Display – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Waveshare 2.7inch Passive-Powered...image
Waveshare 2.7inch Passive-Powered E-Paper Module, Novel Passive NFC Technology, No Battery Required, No More Battery Life Trouble, Black and White Display Colors
$29.99

Related: Make an E-Paper Tap Handle!

Make an E-Paper Tap Handle!

Credit for this photo and build to UnworkableProphet via Printables


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

VEVOR CO2 Double Gauge Regulator

VEVOR CO2 Double Gauge Regulator, Small, Silver

VEVOR CO2 Double Gauge Regulator, Small, Silver

More Info


Highlighted Features
  • Adjustable Range: The pressure range of the gas meter is adjustable from 0 to 60 PSI, allowing you to freely adjust the intake pressure of carbon dioxide gas, thus controlling the foaming texture of beer and ensuring that the beer-making process and results meet your needs and expectations.
  • Pressure Stability: The pressure relief valve autonomously adjusts the pressure to release at 65 PSI, preventing pressure relief under low pressure. This detail design ensures the quality and quantity of the brewed beer, without being affected by pressure issues.
  • Leak-proof: The gas meter comes with gaskets and clamps, both of which help you secure the gas meter to the beer keg and prevent gas leakage. This design guarantees the stability and reliability of the gas meter.
  • Versatile Compatibility: The carbon dioxide gas meter interface standard is CGA320, compatible with hose calibers of 8mm, making it compatible with various beer kegs. The installation is simple and quick, making your beer-making process more convenient.
  • Backflow Prevention: The gas meter is equipped with a check valve to prevent beer from flowing back due to pressure issues. This design ensures a smoother and more stable beer-making process while also maintaining the cleanliness of the beer keg.
Learn More

 

VEVOR CO2 Double Gauge Regulator – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Digital CO2 Monitor – Detect Kegerator Leaks! – CO2 Levels, Humidity & Temp

CO2 Monitor | Detector with Air Quality 4-in1 | Carbon Dioxide Detector | Humidity Meter Sensor with Indoor Thermometer | Digital Higrometer for Indoor Humidity and Temperature | Version 2024

CO2 Monitor | Detector with Air Quality 4-in1 | Carbon Dioxide Detector | Humidity Meter Sensor with Indoor Thermometer | Digital Higrometer for Indoor Humidity and Temperature | Version 2024

More Info


Highlighted Features
  • 🔋 UNLEASH UNINTERRUPTED MONITORING - With our CO2 detector superior battery life, forget about constant charging. Embrace the freedom of long-lasting air quality meter tracking!
  • 🎯 ACCURACY REDEFINED - Our air quality sensor isn't just a gadget, it's your personal health guard. Experience precision like never before and trust in the numbers!
  • 🚨 ALARM THAT CARES - Our CO2 detector doesn't just beep, it alerts you to protect your health. Set your own safety thresholds and let it do the rest. ADD TO CARD!
  • 💪 BUILT TO IMPRESS - Our air quality monitor indoor is a masterpiece of durability. Crafted with top-notch materials, it's the reliable sentinel your home deserves.
  • 💰 PREMIUM QUALITY, POCKET-FRIENDLY PRICE - Why compromise when you can have it all? Our CO2 monitor delivers exceptional performance without burning a hole in your pocket.
  • 🌍 YOUR TRAVEL-SIZED HEALTH COMPANION - Home or away, our portable carbon dioxide detector for travel ensures you're always in the know about your air quality.
  • 👌 SIMPLICITY MEETS EFFICIENCY - No fuss, no hassle. Our home air quality monitor is as user-friendly as it gets. Making air quality testing a walk in the park!
  • 🏠🏢 ONE MONITOR, EVERY ENVIRONMENT - Homes, workshops, offices - our air quality tester adapts effortlessly. It's the versatile choice for all your air monitoring needs.
  • 😌 PEACE OF MIND, DELIVERED - With our CO2 detector, breathe easy and live healthily. It's not just a device, it's your ticket to a worry-free lifestyle
  • 🌟 THE ULTIMATE AIR MONITOR - More than just a CO2 monitor, it's a commitment to your health. Make the smart choice today. Your health is worth it!
Learn More

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

This measures three things that make it perfect for keeping a close eye on your kegerator,,,

  • CO2 levels – help spot CO2 leaks in your kegerator. See below
  • Temperature – monitor your kegerator temperature
  • Humidity – Help judge whether your Eva Dry (or similar) needs recharged for the purpose of handling excess kegerator and fermentation chamber wetness.  See: Damp Kegerator? Fix Kegerator Condensation

TACKLY – CO2 Monitor | Detector with Air Quality 4-in1 | Carbon Dioxide Detector | Humidity Meter Sensor with Indoor Thermometer | Digital Higrometer for Indoor Humidity and Temperature | Version 2024 – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Using a layer of defense to detect against kegerator CO2 leaks…

Placing a CO2 Monitor with alarm inside of your kegerator can serve as another line of defense to protect against co2 leaks and loss. CO2 should not be building up in your kegerator. A CO2 monitor with alarm can alert you of this condition.

This is not a replacement for checking for CO2 leaks using traditional methods, rather a another layer that could save you a trip to swap out a CO2 tank.

Related: Step by Step: Finding and Fixing Keg CO2 Leaks

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

VEVOR CO2 Double Gauge Regulator

VEVOR CO2 Double Gauge Regulator, Small, Silver

VEVOR CO2 Double Gauge Regulator, Small, Silver

More Info


Highlighted Features
  • Adjustable Range: The pressure range of the gas meter is adjustable from 0 to 60 PSI, allowing you to freely adjust the intake pressure of carbon dioxide gas, thus controlling the foaming texture of beer and ensuring that the beer-making process and results meet your needs and expectations.
  • Pressure Stability: The pressure relief valve autonomously adjusts the pressure to release at 65 PSI, preventing pressure relief under low pressure. This detail design ensures the quality and quantity of the brewed beer, without being affected by pressure issues.
  • Leak-proof: The gas meter comes with gaskets and clamps, both of which help you secure the gas meter to the beer keg and prevent gas leakage. This design guarantees the stability and reliability of the gas meter.
  • Versatile Compatibility: The carbon dioxide gas meter interface standard is CGA320, compatible with hose calibers of 8mm, making it compatible with various beer kegs. The installation is simple and quick, making your beer-making process more convenient.
  • Backflow Prevention: The gas meter is equipped with a check valve to prevent beer from flowing back due to pressure issues. This design ensures a smoother and more stable beer-making process while also maintaining the cleanliness of the beer keg.
Learn More

 

VEVOR CO2 Double Gauge Regulator – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

12″ x 6″ Bar Service Mats

Bar Mat 6x12 for Cocktails and Coffee Bar Perfect Dish Drying Mat (1) - Professional Bar Spill Mat Perfect Barware for Bar Set - Dish Drying Soft Rubber Mat for Delicate Glass Dishes and Cups

Bar Service Mats

More Info


Highlighted Features
  • 🔥 PERFECT BAR ACCESSORY, 12 inches by 6 inches; perfect for shots tray, dish drying, and coffee bar; half inch of rubber couching to absorb spills and water from dishes, protect your serving tray from spills that happen while walking
  • 📦 NO DEFORMATIONS CAREFULLY PACKED, the high quality flexible plastic bar mat is conserved in its flat usable shape to prevent deformations; always ready to use, EXACTLY AS YOU SEE IN THE PICTURE ZERO DEFORMATIONS GUARANTEED
  • 🎁 MAKES AN AMAZING GIFT, this is the perfect gift for everyone, the College Instruments Insulated Water Resistant Bar mat barware is such a versatile mat; perfect for coffee bars, shots, shots games, shots bartender, cocktail parties, or even as a dish dryer stand; go on and make it part of your cocktail set
  • 💎 SLIP PREVENTION, the College Instruments Bar Mar is made of our best eco-friendly high friction materials, design to avoid spills and stay stationary to prevent your shot glass to fall; durable for commercial use and perfect for your bar set
  • 🍻 2 YEARS SATISFACTION GUARANTEED, ALL PRODUCTS ARE INSPECTED TO ASSURE QUALITY; because our customers are our number one priority! We are so confident you are going to love your new Bar Mat that we back it up with a Total Satisfaction No Questions Asked Guarantee!
Learn More

 

Possible usage ideas: Use as a bar mat at your bar, use to help dry items on brew day and use as a drip tray for your kegerator.

Bar Mat 6×12 for Cocktails and Coffee Bar Perfect Dish Drying Mat (1) – Professional Bar Spill Mat Perfect Barware for Bar Set – Dish Drying Soft Rubber Mat for Delicate Glass Dishes and Cups – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

OxiClean Free Versatile...image
OxiClean Free Versatile Stain Remover Powder, 3 lb
$8.99 ($0.14 / load)
Vacuum Sealer Machine...image
Vacuum Sealer Machine with 55 Count 8"x12" Food Sealers Bags and 8"*79' Vacuum Sealer Roll, Inkbird Automatic Vacuum Sealers Machine with Built-in Cutter, Dry & Moist Sealing Modes for Food Storage
$58.99
Gamma2 Vittles Vault...image
Gamma2 Vittles Vault Airtight Dog Food Storage Container - Fits up to 35 Pounds of Dry Pet Food - Perfect for Cat and Puppy Kibble - BPA-Free Plastic - Made in the USA - 12" L x 16.75" H
$32.45 -$7.53 $24.92
FLOTit 2.0 -...image
FLOTit 2.0 - No Beer Left Behind Floating Dip Tube with Double Filter Inlet (DFI) of 500/300 micron for always clear beer, less beer waste and no clogging. Made in USA.
$29.00
Meat Thermometer Digital...image
Meat Thermometer Digital for Grilling and Cooking - ANDAXIN Waterproof Ultra-Fast Instant Read Food thermometers with Backlight & Calibration for Kitchen, Deep Fry, BBQ, Grill(Red/Black), LCD
$8.98
VEVOR Magnetic Stirrer,...image
VEVOR Magnetic Stirrer, 0-2000 RPM Stir Plate with Adjustable Speed Knob, 3000mL Plate Stirrer Kit, Stir Bar Included
$17.61

adamztop5

KOMOS Stainless Triple Tap Draft Tower – Includes THREE Intertap Faucets – on sale for $179.99

KOMOS® Stainless Triple Tap Draft Tower | Intertap® Faucets | Duotight Shank Adapters

KOMOS® Stainless Triple Tap Draft Tower | Intertap® Faucets | Duotight Shank Adapters

More Info

From the product description, check product page for current description, price and availability:

Single tap tower with reflective chrome finish. The tower is made from ABS plastic. Includes polished chrome Intertap forward-sealing faucet, faucet handle, and tower shank with 6mm (0.24″) barbed tailpiece. Mounting screws included.

Intertap Stainless Steel, Forward Sealing Faucet from MoreBeer.  Unique modular threaded spout design can fit a variety of attachments.

Intertaps are awesome!  Check out my Hands on Review of these great faucets.

  • This combo is on sale for $179.99.
  • Get Free Shipping: Shipping is free with a qualifying $59 order to many US addresses
  • Some filler item ideas to help you qualify for free shipping… PBW, Sale Items (shows most popular deals first), Hop Market (shows most popular deals first)

KOMOS® Stainless Triple Tap Draft Tower | Intertap® Faucets | Duotight Shank Adapters KG402C

Also: Intertap Forward Sealing Stainless Steel Beer Faucet D1210 | Complete Lineup of Intertap Faucets and Accessories

duotightreview

intertap faucet review

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

Continue reading →

Two Pressure CO2 Regulator – multiple carbonation levels and more… $69.98 + free shipping

FERRODAY Two System CO2 Regulator Kegerator Regulator Heavy-Duty Brass Body, Ball Valve, Silicone Cover, Individual Gauges for Outlet Pressure & Tank Pressure Regulator Easy Control of 2 Kinds of Beer

FERRODAY Two System CO2 Regulator Kegerator Regulator Heavy-Duty Brass Body, Ball Valve, Silicone Cover, Individual Gauges for Outlet Pressure & Tank Pressure Regulator Easy Control of 2 Kinds of Beer

More Info

Highlighted Features
  • 1. TWO-SYSTEM CO2 REGULATOR: The Ferroday CGA-320 Co2 Regulator is a Two system Kegerator Regulator that accurately regulates the 2 output pressures from the tank to beer kegs, and monitors the pressure in the CO2 tanks, then displays them on individual gauges for easy and clear read
  • 2. CONVENIENCE & DURABLE: The Ferroday Beer Regulator is durable, compact, and easy to use. The forged brass body weighs 2.9 lbs, which is absolutely heavy-duty, and durable. One regulator for 2 systems of beer dispensing, great convenience and easy to manage, making it the perfect kegerator regulator for home use
  • 3. ACCURATE & STABLE, DESIGNED FOR BEER KEG: This Co2 Regulator for Kegerator is a must-have for homebrewers. Twice regulate the co2 for a more precise and more stable co2 flow, time won’t change your set, cause we know how important it is to control the pressure precisely and a steady flow of CO2 to keep your beer fresh and carbonated
  • 4. TAMPER-PROOF VALVE & SAFETY FIRST: There are 2 tamper-proof pressure relief valves on this keg regulator, you can slightly pull them manually for the CO2 regulator pressure reset. On the other hand, they will automatically release pressure when the pressure is reached at 50psi(+/-5psi) for safety
  • 5. NO ASSEMBLY REQUIRED & TECHNICAL SUPPORT SERVICE: Again, this Co2 beer gas regulator is a dual system regulator that allows you to control two different kegs simultaneously, easy for management. It is also easy to install and requires no assembly. Professional & Easy to Use! Buy the well-made dual system regulator from Ferroday today
Learn More

 

Why a two pressure regulator?  A two pressure regulator gives you the ability to keep kegs at different pressures.  This is a requirement to maintain two distinct carbonation levels.  It’s also handy if you want to force carbonate a keg more quickly, at a higher pressure, while maintaining your standard serving pressure on a keg that’s already being served or if you want to have a utility line for purging kegs and such.

4/24 3 AM Central: This is selling for just $69.98. Shipping is also free to many US addresses. Prices and availability can change quickly.  Check product page for current info – More About Prices

FERRODAY Two System CO2 Regulator Kegerator Regulator Heavy-Duty Brass Body, Ball Valve, Silicone Cover, Individual Gauges for Outlet Pressure & Tank Pressure Regulator Easy Control of 2 Kinds of Beer – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

HALF Off Kegs w/Keg Connection Keg Kit Purchase

  • As of this posting, Keg Connection is offering a whopping half off kegs when you purchase one of their keg kit kegging systems.
  • Select the keg as an option on qualifying kits
  • Shipping is a flat fee no matter how much you order to addressed in the contiguous US.
  • HBF Reader Coupon!  As of this posting, coupon code HBF5OFF takes an additional 5% off.  Check Keg Connection for current availability.

HALF Off Kegs with Keg Kits at Keg Connection

Also at Keg Connection…

+ Keg Connection Says… ⭐⭐⭐⭐⭐ The Reviews Are In – BEST KEGS EVER

18+ Liter Ball Lock Keg | Fully Remanufactured (AEB/SAFER/Cornelius) | SEE DESCRIPTION

18+ Liter Ball Lock Keg | Fully Remanufactured (AEB/SAFER/Cornelius) | SEE DESCRIPTION

More Info

From the product description, check product page for current description, price and availability:

18+ Liter Ball Lock Keg | Fully Remanufactured (AEB/SAFER/Cornelius)
These are top-tier, refurbished Corny kegs made of stainless steel. With stainless steel costs climbing and high-quality used kegs becoming increasingly scarce, this is an offer you won’t want to overlook.

Every keg in our collection undergoes a comprehensive refurbishment process. This includes deep cleaning, machine polishing, and the replacement of o-rings on the lid, PRV, as well as liquid and gas dip tubes, in addition to two o-rings on each post. These kegs are all sourced from elite brands, including AEB, SAFER, and CORNELIUS.

Additional Information on Our Refurbished Kegs:
Though these kegs are pre-owned, they may exhibit minor cosmetic imperfections such as small dings and scratches that couldn’t be completely polished away. None of these issues impact their functionality.

After the cleaning and polishing operations, some residue might be present on either the keg’s exterior or its rubber components. While it may transfer onto your hands, this is merely a reminder that all kegs—whether new or used—need to be meticulously cleaned before usage. Proper sanitization is also crucial before filling them with any beverage.

A subset of these kegs has experienced sun damage to the rubber areas, affecting the seal. This could lead to the formation of black marks, particularly when the rubber is wet, although this is less likely when it’s dry.

Lastly, you might find some kegs with double o-rings on their posts. While this may appear out of the ordinary, rest assured they function as effectively as those with single o-rings.

Diameter: 8-7/8″ (225mm)
Height: 22-1/4″ (565mm)
Weight: 9 lbs 9oz (4.34kg)
Volume: 4.75 gallons (18 liters) but some are also slightly more in full volume
Post Thread Size: 9/16-18 UNF Thread on both the IN and Out.

 

The fact is… the era of cheap and readily available used homebrew kegs is… done. I could give you a bunch of reasoning behind that opinion including one of the best sources for used kegs… de-listing used kegs, but I’ve got a regularly updated article on the topic you can check out.

Keg Connection Says…

“People have been receiving these new PREMIUM REMANUFACTURED KEGS and already love them! That’s because there hasn’t been a used keg on the market in this good of condition, EVER. They’re ‘used’ in a literal sense but each of these kegs has undergone an extensive refurbishing process. They have been meticulously cleaned, machine-polished, and fitted with new o-rings including the lid, pressure relief valve, and both liquid and gas dip tubes. Plus, we’ve added two new o-rings on each post.”


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

Some everyday great deals and unique items at Keg Connection…

Parts and Diagrams:

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Price, promotions and availability can change quickly. Check the product page for current price, description and availability

Damp Kegerator? Fix Kegerator Condensation!

kegeratorcondensation

I use a converted chest freezer as my kegerator/keezer.  With the aid of some modifications like a collar and an overriding thermostat, it works really well.  The big downside I’ve experienced is… condensation.  Not just beads of water on the sides, I had pooling water in the bottom.  Not a good thing.  This varies by how often I’m in it, the season and current weather, but the fact is, a chest freezer just isn’t designed to deal with condensation like a refrigerator is.

Get Current Price & Shop Around, How-To Continues Below:

Eva-Dry Wireless Mini...image
Eva-Dry Wireless Mini Dehumidifier, White (E-333)
$14.97 -$1.31 $13.66
Eva-Dry E-500 Renewable...image
Eva-Dry E-500 Renewable dehumidifier, Pack of 2, white, perfect for closets, bathrooms, safes, boats, and rvs
$69.95
Eva-Dry E-500 5-pack...image
Eva-Dry E-500 5-pack Wireless, Portable & Powerful Mini Dehumidifier. Energy Efficient, Renewable Moisture Absorber. Perfect for Closets, Pantries, Boat’s, Kegerator & Storage.
$134.88
Eva-Dry E-333 (6-pack)...image
Eva-Dry E-333 (6-pack) Wireless Mini Dehumidifier. Top Moisture Absorber for Small Spaces. Rechargeable & Portable. Perfect for Pantries, Cars, RV & Gun Safes, Closets, & Travel.
$114.95

These are affiliate links. Note that multiple variations of these products may be available, as such a different version may appear at these links

eva dry 500 review kegerator condensation

Enter the Eva-Dry E-500.  The Eva Dry contains a desiccant material that absorbs moisture.  The beads inside this unit absorb moisture.  As they do that they change color.  When they have gone from blue to pink, you know it’s time to “renew” the unit.  This is done by removing it from the kegerator and plugging it into an outlet.  The integrated heating element drives off any built up moisture.  When the beads turn blue (overnight), you’re ready to go.  I don’t have to do this often, usually every couple months.

eva dry 500 review kegerator condensationFront of the Eva-Dry E-500

Continue reading →

Hands on Review: Safecid Beer Line Cleaner

This review is by Homebrew Finds Contributor Brad Probert.  Brad is an engineer, expert homebrewer and experienced reviewer.  Grab a link to Brad’s website at the end of this review.

Safecid Cleaner

Those of us that have kegerators know that cleaning the beer lines is a necessary thing. We also know that cleaning them is a pretty unexciting event. Products for cleaning them are generally unexciting as well because they’re all pretty similar. There is one product that is different- Safecid Beer Line Cleaner.

Check Current Pricing & Availability:

Safecid HAR102 Acid...image
Safecid HAR102 Acid Cleaner 32 Fl Oz - Powerful & Safe Beer Stone Remover - Nontoxic Beer Line Acid Rinse - Low-Foaming Acid Replacement Line Cleaner
$26.95 ($0.84 / Fl Oz)
Safecid CR919 Alkaline...image
Safecid CR919 Alkaline Beer Line Cleaner 32 Fl Oz
$24.95 ($0.78 / Fl Oz)

These are affiliate links. Note that multiple variations of these products may be available, as such a different version may appear at these links

Safecid has both an acid cleaner and an alkaline/caustic cleaner. The cleaners are as potent as other cleaners, but their patented chemistry makes it non-toxic. This means it is neither harmful to people (skin, eyes), nor harmful to the water supply when rinsed down the drain. And that’s what makes it different from other cleaners.

Alkaline Cleaner Distinct Blue Color

See-Through Volume Markings

The Brewer’s Association publishes draft beer cleaning guidelines for bars/breweries. They recommend a cleaning period of every 2 weeks, based on research looking at bacteria build-up in the lines. The research looked at the growth of both aerobic bacteria (leading to sour and vinegar off-flavors) and anaerobic bacteria (leading to butter and caramel off-flavors). This bi-weekly cleaning is to be done with an Alkaline cleaner, and then every 3 months an acid cleaner should be used. The alkaline cleaner deals with organic compounds (bacteria) and the acid cleaner deals with inorganic compounds (beer stone). They point out that the cleaning frequency is not dependent on how much beer is flowed through the lines- busy taps or slow ones alike.

Continue reading →

FERRODAY Dual Gauge CO2 Draft Beer Regulator

  1. FERRODAY Dual Gauge CO2 Draft Beer Regulator Dual Stage Pressure Regulator CGA-320 CO2 Tank Beer Kegerator Regulator with Relief Valve Beer Keg Pressure Regulator for Homebrew 0-60 PSI 0-3000PSI

FERRODAY Dual Gauge CO2 Draft Beer Regulator Dual Stage Pressure Regulator CGA-320 CO2 Tank Beer Kegerator Regulator with Relief Valve Beer Keg Pressure Regulator for Homebrew 0-60 PSI 0-3000PSI

More Info


Highlighted Features
  • Safety & No Leaks: FERRODAY CO2 keg pressure regulator features a heavy-duty forged brass body, well made connections, and exquisitely crafted pressure release valve to prevent any kind of gas leakage
  • Easy to Adjust by Hand: CO2 regulator has 2 control knobs, big adjustment knob enables more precise control even small adjustments, small shut-off knob allows instantly shut off without liquid backing up the gas line, easy to turn
  • Lock Ring to Hold PSI & Big Gauge Clear View: A lock ring under the big knob, so the knob can be firmly locked to hold your pressure setting. Two Big gauges always accurately show you the CO2 volume in the cylinder and the output pressure to keg. FERRODAY keg regulator has a clear view of pressure for a better homebrew experience
  • Pressure Release Valve & Filter: Safety first! A customized pressure release valve automatically releases pressures at about 50 psi for safety concerns. Also can be manually pulled out for pressure adjustment. A sintered metal filter in the stem keeps dirt out of the regulator
  • After-Sales Service: We are committed to offering you high-quality products as well as superior service! Please feel free to tell if any problem, we would try our best to satisfy you. Provide technical support
Learn More

 

FERRODAY Dual Gauge CO2 Regulator Beer Kegerator CO2 Regulator Beer Keg Dual-stage Kegerator Regulator CGA-320 Beer Regulator Co2 Kegerator Part Beer Keg Regulator Co2 Beer Gas Regulator Beer Tap Tool – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Using a CO2 Detector in Your Kegerator

INKBIRD WiFi Indoor Air Quality Monitor, CO2 Detector, Accurate NDIR Sensor, Temperature and Relative Humidity, Indoor CO2 Meter with Data Logger, for Cars, Wine Cellars, Grow Tents, Homes (INK-CO2W).Pictured: INKBIRD WiFi Indoor Air Quality Monitor, CO2 Detecto

Losing a tank of CO2 because of leak is frustrating. It’s a waste of time and money. Adding a CO2 monitor can help warn you of leaks minimizing loss, wasted money, wasted time and frustration.

A CO2 Monitor Alarm in Your Kegerator

Placing a CO2 Monitor with alarm inside of your kegerator can serve as another line of defense to protect against co2 leaks and loss. CO2 should not be building up in your kegerator. A CO2 monitor with alarm can alert you of this condition.

Options with WiFi and a companion app are nice because you can get notifications on your compatible phone.

These are affiliate links. Note that multiple variations of these products may be available, as such a different version may appear at these links

Beyond CO2 Levels…

Some models display additional information that can be helpful information about your kegerator. These vary model to model and can sometime include temperature and humidity.

  • Temperature – monitor your kegerator temperature
  • Humidity – Help judge whether your Eva Dry (or similar) needs recharged for the purpose of handling excess kegerator and fermentation chamber wetness.  See: Damp Kegerator? Fix Kegerator Condensation

Not A Replacement for Checking for Leaks…

A do not consider a CO2 alarm as replacement for thoroughly checking for and addressing leaks. Rather this is another layer that could save you a trip to swap out a CO2 tank.

The Biggest Trouble Spot

Color coded post o-rings. From our Keg Rebuild Post – Jump To: Replace O-Rings

In my opinion the most difficult spot to check and the cause of many a lost CO2 tanks are… gas post o-rings.

Testing at this point using the “spray bottle method” (spray Star San everywhere and check for bubbles) is impossible or at the very least difficult and messy.  Leaks will only surface here when a gas QD is actually engaged.  The problem is, you can’t easily see that spot when a QD is on.

The problem stated more simply… You need a QD on to see if it’s leaking, but you can’t see it if a QD is on. You can use what I call the pressure gauge method to check for overall leaks. But even using that method you know that you have a leak but it gives no indication where it’s at.

Be quick to replace gas side o-rings… I’m quick to replace gas post (and gas dip tube) o-rings. Beyond slow and no-carbing beers, a bad gas side o-ring can lead to empty tanks. That’s a waste of time and money and it’s frustrating.

These o-rings cost pennies each when you buy them in bulk. Liberally replacing these can save time, money and frustration.

Continue reading →