Category Archives: Kegerator

Inkbird CO2 Detector & Alarm – Detect Kegerator Leaks! – $63.99 w/20% off coupon

INKBIRD WiFi Indoor Air Quality Monitor, CO2 Detector, Accurate NDIR Sensor, Temperature and Relative Humidity, Indoor CO2 Meter with Data Logger, for Cars, Wine Cellars, Grow Tents, Homes (INK-CO2W).

INKBIRD WiFi Indoor Air Quality Monitor, CO2 Detector

More Info
Highlighted Features
  • 【NOTE】We recommend that when using the detector for the first time, place the device in an open and uninhabited environment and manually calibrate it once to avoid inaccurate readings.

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

This measures three things that make it perfect for keeping a close eye on your kegerator,,,

  • CO2 levels – help spot CO2 leaks in your kegerator. See below
  • Temperature – monitor your kegerator temperature
  • Humidity – Help judge whether your Eva Dry (or similar) needs recharged for the purpose of handling excess kegerator and fermentation chamber wetness.  See: Damp Kegerator? Fix Kegerator Condensation

Charges via USB and has a companion smart phone app.

11/5 3 PM Central: These are on sale for $79.99. Apply the 20% off coupon, available on the product page, and it drops to $63.99 at checkout. Shipping is also free to many US addresses. Prices and availability can change quickly.  Check product page for current info – More About Prices

INKBIRD WiFi Indoor Air Quality Monitor, CO2 Detector, Accurate NDIR Sensor, Temperature and Relative Humidity, Indoor CO2 Meter with Data Logger, for Cars, Wine Cellars, Grow Tents, Homes (INK-CO2W). – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Using a layer of defense to detect against kegerator CO2 leaks…

Placing a CO2 Monitor with alarm inside of your kegerator can serve as another line of defense to protect against co2 leaks and loss. CO2 should not be building up in your kegerator. A CO2 monitor with alarm can alert you of this condition.

This is not a replacement for checking for CO2 leaks using traditional methods, rather a another layer that could save you a trip to swap out a CO2 tank.

Related: Step by Step: Finding and Fixing Keg CO2 Leaks

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Eva Dry E-333 Dehumidifier [Handle Kegerator & Fermentation Chamber Condensation] – back at $14.97, save 40%… volatile

Hands On Review: Insulating Neoprene Kegerator Tower Wrap - Fight the First Foamy Pint!

Eva Dry-E333 Dehumidifier

More Info


Highlighted Features
  • ✔ EASY TO USE: This mini dehumidifier is spill and mess free. Just hang and go! Non-toxic, child and pet safe! Your small rooms will be dry and odor free. Works for areas up to 333 cubic feet.
  • ✔ MINI DEHUMIDIFIER GOES A LONG WAY: Super dry dehumidifier unit lasts 20-30 days before recharging the silica gel beads. Absorbing capacity up to 6oz.
  • ✔ SMALL, SLEEK DESIGN: This portable small design lets you hang or conveniently place the dehumidifier anywhere to fight pesky humidity! Cars, closets, boats, cabinets, gun safes, and even gym bags! A very convenient cool gift for everyone!
  • ✔ 100% CORDLESS DEHUMIDIFIER: Moisture out: Cords out! No cables or batteries required. Just charge your device and say bye-bye humidity! Renewable and rechargeable moisture absorber. Lasts up to 4 weeks before recharge.
  • ✔ SATISFACTION : SUPER DRY ODOR-FREE LIFE! Our dehumidifiers are top quality! Super durable and reliable. Comes with an industry-leading 5 year so you can get rid of moisture and not worry about mold or leaks!
  • ✔ EVA-DRY DEHUMIDIFIERS EXPERTS: We have the dryness you need! Find the perfect dehumidifier for your specific need: Car dehumidifier, gun safe dehumidifier, even the dehumidifier bag! Dehumidifiers big or small, WE HAVE THEM!

 

The Eva Dry E-333 contains a desiccant material that absorbs moisture.  As this material absorbs moisture it also changes color.  Dark blue means it’s dry and pink means it’s becoming saturated.  The great thing about the Eva-Dry is that the desiccant material is reusable.  The unit contains a built in heater that drives off built up moisture.  When it becomes saturated, plug it in overnight and it’s ready to go again the next day.

I use the larger E-500 in my kegerator.  Check out my extensive Hands on Review of the E-500 including condensation trials.

What are others saying?  Search this product’s Amazon reviews for “kegerator” – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

As of this update, these are on sale for $14.97. That’s 40% off list. Shipping is also free to many US addresses with Prime Membership [Try Prime for Free] or a qualifying orderPrices and availability can change quickly.  Check product page for current info – More About Prices

Eva-dry E-333 Mini Dehumidifier, Pack of 1, White Sand – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

kegerator condensation


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. ssprod:B000H0XFCS:ptr

Tap Board Black Dry Erase Tap Handle… $9.99 + free shipping!

Tap Board Black Dry Erase Tap Handle

Tap Board Black Dry Erase Tap Handle

More Info


Highlighted Features
  • Made of fine walnut with a black dry erase surface
  • Easy to write on and erase
  • Saves time and money by allowing you to use the same tap handle for every keg
  • Fits all US faucet lever threads

 

11/3 3 PM Central: These are on sale for just $9.99. Shipping is also free to many US addresses. Prices and availability can change quickly Check product page for current info – More About Prices

Tap Board Black Dry Erase Tap Handle – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Kegerator Beer Line Temperatures & Reducing Foam with a Recirculating Fan + Limited Time DEAL

Back in 2014, I had what I would call a reasonably well put together and balanced kegerator.  In spite of that, for years, I had dealt with the dreaded first foamy pint of beer.  After that pint of beer, beer would pour great.  That is until a significant delay between pours – overnight or a few hours.


Related Resources – Foam Control & Kegerator Balancing


Limited Time Deal on the Fan I Use!

AC Infinity AXIAL 8038, Quiet Muffin Fan, 120V AC 80mm x 38mm Low Speed, UL-Certified for DIY Cooling Ventilation Exhaust Projects

img_purchdateI have this fan and use it in kegerator as a recirculation fan.

What are Other’s Saying?   Search this product’s Amazon reviews for “kegerator” – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

As of this update these are selling for $17.99. Apply the 10% off coupon available on the product page and the price drops to $16.19 at checkout. Shipping is also free to many US addresses with Prime Membership [Try Prime for Free] or a qualifying orderPrices, promotions and availability can change quickly.  Check product page for current info – More About Prices

AC Infinity AXIAL 8038, Quiet Muffin Fan, 120V AC 80mm x 38mm Low Speed, UL-Certified for DIY Cooling Ventilation Exhaust Projects – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Diagnose Other Issues


A Closer Look at Kegerator Beer Line Temps

cln_img_5476The setup.  I have two temperature probes in my kegerator.  One is zip-tied to the top of a beverage line.  The other is zip-tied to a can of beer.  That’s how I have kept the probe in my kegerator for a long time with the thinking that the mass of the can of beer will help to stabilize temperature readings and give overall stable and accurate readings.  That can is sitting on the compressor hump of my Kenmore Deep Freeze (8.8 Cu ft Model 16932, out of production).  That puts it about mid keg.

Beer Line Temps – No Recirculation Fan

The cause of the problem is pretty clear.  Heat rises.  That means the top of your kegerator is going to be warmer than the bottom of your kegerator.  That warmer beer foams when it comes out.  The faucet and shank are also warmer.  That warmth adds to the problem.

How much is the temperature variance?  Of course, this will vary from setup to setup and climate to climate.  I was relatively shocked by the temperature difference in my own kegerator.

img_temps

The top reading about mid keg and the bottom reading is the top the top of my beer lines.  These are about 22″ apart.  This graph shows a point in time variance between the two of 14.9 degrees F.   My beer is about the temperature I want it, but the top of my serving line is much warmer.  That difference in temperature causes the first pint to have too much foam.  Pours that happen soon after the first are fine.  The tubing, shank and beer are relatively cool.

Adding a Recirculating Fan to Reduce Beer Foam

Continue reading

Hands On Review: Inkbird ITC-308 Dual Stage Temperature Controller

Updated: November 14, 2024

Inkbird’s ITC-308 Digital Dual Stage Temperature Controller is a dual stage, pre-wired Digital Temperature Controller

The ITC-308 comes in the original version as well as an updated Wi-Fi enabled model.  This review covers both editions of this controller.

Why a Temp Controller?

Temperature controllers, sometimes referred to as over-riding thermostats, can control devices like refrigerators, freezers and fermentation heating devices to provide a consistent temperature for your kegerator, fermentation chamber or brew system. They do this by monitoring the temperature and cycling on and off the device in question. Generally, you will set the device to full cooling or heating power and the temperature controller takes over from there.


Check Prices, Current Specs & Availability, Review Continues Below:

Alternate Listings:

Different listings or combos for the ITC-308 may be available – search Amazon for “Inkbird Digital Temperature Controller”  – to see what variations may be available

Canada:

At MoreBeer:


Our ITC-308 Deal Pages:

These pages show our most recent deals for these great controllers

Inkbird ITC-308 Digital Dual Stage Temp Controller [Kegerator or Fermentation]

Inkbird ITC-308 WiFi Digital Dual Stage Temp Controller


Dual vs Single Stage

Dual stage means that the ITC-308 can control both a heating and cooling device.  Alternatively, it can control a heating or a cooling device.  This controller displays in Fahrenheit and Centigrade.  Dual Display shows both measured and set temperature.

Hands on Review Inkbird’s ITC-308 Temp Controller

Continue reading

Yaebrew Triple Tap Draft Kegerator Tower + 3 Faucets & More

YB YaeBrew Triple Tap Faucet Stainless Steel Draft Beer Tower, 3-Inches Column - 3 Faucets

Triple Tap Faucet Stainless Steel Draft Beer Tower, 3-Inches Column – 3 Faucets

More Info

From the product description, check product page for current description, price and availability:

  • Pretty Polished stainless steel body;
  • A tool wrench included;
  • Come with some spare springs, red seals and 5 Feet (3/16″ ID) Beer Hose, with Tailpiece and Hex Nut Connection
  • This YaeBrew Triple Tap Beer Tower has 3 brass faucets with levers.

 

YB YaeBrew Triple Tap Faucet Stainless Steel Draft Beer Tower, 3-Inches Column – 3 Faucets – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Great for Tailgating!.. Ball Lock Mini CO2 Gas Regulator 0 to 60 PSI – $21.49, best price + Portable Serving Resource Post

Dbgogo Hold Stable Pressure 0-60 PSI Mini Keg Regulator, No Leaking Portable Cornelius Corny Beer Growler Outdoor Picnic Party Carbonation CO2 Gas Ball Lock Disconnect keg Charger Dispenser Kit

Mini CO2 Regulator

More Info


Highlighted Features
  • New version gets rid of bad performance: compared to other brand single-stage keg charger, this mini keg charger regulator will buffer and stabilize the pressure transferring speed to prevent the gauge damage caused by sudden high pressure, the pressure holding performance can be comparable to the dual-stage mini keg charger! compared to traditional keg charger without pressure gauge and adjustment knob, this mini regulator allows you to read pressure clearly and set a suitable carbonated value.
  • Anti-damage design and pressure adjustment knob safety design: there is a built-in metal thread ring in the mini co2 regulator bottom to prevent the bottom from being worn and damaged by the installation turning. there is a pressure adjustment knob on the top of the mini keg regulator, you can decrease pressure value by turning the pressure adjustment knob towards DECREASE direction during working process to keep user and gauge safe.
  • No leaks and quality material: the ball lock tip is designed with a sealing o-ring to guarantee a tight connection between ball lock and brass connector, which will avoid the gas leaks effectively. we also provide a spare ball lock tip white sealing washer for replacement. this mini keg charger is made of anodised aluminium, not easy to get rusted, smooth body is easy to wipe out to clean.
  • A useful lever wrench for installation: mini keg co2 regulator is easy to install for using. install a small co2 bottle to the regulator bottom first, fix the brass connector to the regulator by using and turning lever wrench clockwise secondly, then connect the gas ball lock to the co2 regulator and attach this keg charger kit to your beer keg, set your carbonated pressure by pressure adjustment knob finally. turning the adjustment knob towards INCREASE means that you are turning on keg charge
  • Portable and perfect for being used at various activities: this mini and compact mini keg regulator is compatible with 16g cartridge, can be applied to 2L, 3.6L, 5L beer growler keg, allows you to dispense beer, cold brew coffee, soda water, iced tea on barbecue, beach, lake, holiday parties, and other outdoor events. no need to take the large system co2 tank, this light and small beer carbonation equipment lets you enjoy tasty drinking anytime and anywhere.

 

Use to serve your keg of homebrew on the go or as a backup in case you run out of CO2.  The good thing about this style of regulator as compared to the handheld injector style is that you can actually set a pressure and forget it.

As of this update these are selling for just $21.49. That’s the best historical third party Amazon price I found, notwithstanding Lightning Deals or coupons. Shipping is also free to many US addresses with Prime Membership [Try Prime for Free] or a qualifying order. Prices and availability can change quickly Check product page for current info – More About Prices

Dbgogo Hold Stable Pressure 0-60 PSI Mini Keg Regulator, No Leaking Portable Cornelius Corny Beer Growler Outdoor Picnic Party Carbonation CO2 Gas Ball Lock Disconnect keg Charger Dispenser Kit – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Portable Draft Beer Serving Options!


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. ssprod:B09NJN3Q9K:ptr

Hands On Review: Inkbird ITC-308 Dual Stage Temperature Controller

Updated: November 8, 2024

Inkbird’s ITC-308 Digital Dual Stage Temperature Controller is a dual stage, pre-wired Digital Temperature Controller

The ITC-308 comes in the original version as well as an updated Wi-Fi enabled model.  This review covers both editions of this controller.

Why a Temp Controller?

Temperature controllers, sometimes referred to as over-riding thermostats, can control devices like refrigerators, freezers and fermentation heating devices to provide a consistent temperature for your kegerator, fermentation chamber or brew system. They do this by monitoring the temperature and cycling on and off the device in question. Generally, you will set the device to full cooling or heating power and the temperature controller takes over from there.


Check Prices, Current Specs & Availability, Review Continues Below:

Alternate Listings:

Different listings or combos for the ITC-308 may be available – search Amazon for “Inkbird Digital Temperature Controller”  – to see what variations may be available

Canada:

At MoreBeer:


Our ITC-308 Deal Pages:

These pages show our most recent deals for these great controllers

Inkbird ITC-308 Digital Dual Stage Temp Controller [Kegerator or Fermentation]

Inkbird ITC-308 WiFi Digital Dual Stage Temp Controller


Dual vs Single Stage

Dual stage means that the ITC-308 can control both a heating and cooling device.  Alternatively, it can control a heating or a cooling device.  This controller displays in Fahrenheit and Centigrade.  Dual Display shows both measured and set temperature.

Hands on Review Inkbird’s ITC-308 Temp Controller

Continue reading

Inkbird ITC-308 Digital Dual Stage Temp Controller [Kegerator or Fermentation]

ITC-308 Dual Stage, Pre-Wired Digital Temperature Controller by Inkbird

ITC-308 Dual Stage, Pre-Wired Digital Temperature Controller by Inkbird

More Info


Highlighted Features
  • Convenient Design: Plug and play, easy to use; Support Celsius or Fahrenheit reading
  • Dual Relay Output: Support to connect with refrigeration and heating equipment at the same time
  • Dual Display Windows: You can view the measured temperature and set temperature at the same time
  • High and low-temperature: Buzzer alarms when the temperature reaches preset temps
  • Maximum output load: 1100 W (110 V)
  • Calibration and Compressor Delay: It comes with temperature calibration and compressor delay which can protect your refrigeration

 

This controller can control both a heating and cooling device.  Alternatively, it can control a heating or a cooling device.

Use to control fermentation or kegerator temperatures. This is a great controller. Check out my Hands on Review

Inkbird ITC-308 Digital Temperature Controller 2-Stage Outlet Thermostat Heating and Cooling Mode Carboy Homebrew Fermenter Greenhouse Terrarium 110V 10A 1100W – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading

Inkbird ITC-308 Digital Dual Stage Temp Controller [Kegerator or Fermentation]

ITC-308 Dual Stage, Pre-Wired Digital Temperature Controller by Inkbird

ITC-308 Dual Stage, Pre-Wired Digital Temperature Controller by Inkbird

More Info


Highlighted Features
  • Convenient Design: Plug and play, easy to use; Support Celsius or Fahrenheit reading
  • Dual Relay Output: Support to connect with refrigeration and heating equipment at the same time
  • Dual Display Windows: You can view the measured temperature and set temperature at the same time
  • High and low-temperature: Buzzer alarms when the temperature reaches preset temps
  • Maximum output load: 1100 W (110 V)
  • Calibration and Compressor Delay: It comes with temperature calibration and compressor delay which can protect your refrigeration

 

This controller can control both a heating and cooling device.  Alternatively, it can control a heating or a cooling device.

Use to control fermentation or kegerator temperatures. This is a great controller. Check out my Hands on Review

Inkbird ITC-308 Digital Temperature Controller 2-Stage Outlet Thermostat Heating and Cooling Mode Carboy Homebrew Fermenter Greenhouse Terrarium 110V 10A 1100W – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading

INKBIRD Smart Bluetooth Two Stage Temperature Controller

INKBIRD Smart Temperature Controller Heating Cooling 2-Stage Outlet Thermostat Controller Plug for Reptiles Aquarium Homebrew Breeding Fermenter 10A/1200W

INKBIRD Smart Temperature Controller Heating Cooling 2-Stage Outlet Thermostat Controller Plug for Reptiles Aquarium Homebrew Breeding Fermenter 10A/1200W

More Info


Highlighted Features
  • 【App Remote Control via Bluetooth 5.0】This temperature controller has Bluetooth 5.0 that allows you to remotely control it through the INKBIRD app within 100 meters (328 feet).
  • 【Personalized mode settings】You can set up to 12 periodic temperature ranges in a day using time mode. Two temperature ranges can be set in day/night mode. When in temperature mode, simply set the start and stop temperatures to run automatically.
  • 【Reliable and Trustworthy with More Functions】This Bluetooth temperature controller features high and low temperature alarms, refrigeration delay protection, and temperature calibration.
  • 【Waterproof Probe & Maximum Power Output】The included temperature probe is IP67 waterproof and can accurately measure temperatures, temperature range: -40℉~212℉. Max power output: 1200W, which is shared between two different outlets.
  • 【No Need to Store Data In the Cloud】To prevent losing data, the ITC-312 device can store offline data for 30 days and transfer it to the INKBIRD app after connecting via Bluetooth. Moreover, the INKBIRD app can store 1 year temper data.
  • 【Wide Application Range】The ITC-312 Thermostat is useful for a range of temperature control needs including home living, heating, cultivation, seedling growing, and wooden sheds.

 

This controller can control both a heating and cooling device.  Alternatively, it can control a heating or a cooling device.

INKBIRD Smart Temperature Controller Heating Cooling 2-Stage Outlet Thermostat Controller Plug for Reptiles Aquarium Homebrew Breeding Fermenter 10A/1200W – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Yeast Starters & Fermentation | Kegerator Tips & Gear | Inkbird ITC308 Review


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

Inkbird ITC-308 WiFi Digital Dual Stage Temp Controller

ITC-308 Dual Stage, Pre-Wired Digital Temperature Controller with WI-FI by Inkbird

ITC-308 Dual Stage, Pre-Wired Digital Temperature Controller with WI-FI by Inkbird

More Info


Highlighted Features
  • WIFI smart controller: Supports both IOS and Android; WIFI connection supports 2.4 GHz Wi-Fi with INKBIRD APP to control the temperature remotely
  • Dual Relay Outputs: the controller will turn on/off refrigeration and heating equipment as conditions change
  • High and Low-Temperature Alarm: The controller will alarm when the temperature reaches the preset temperatures or the sensor experiences a malfunction
  • Convenient Design: Plug-n-play, easy to use; support Celsius or Fahrenheit reading, as well as temperature calibration
  • Maximum output load: 1100 W (110 V)
  • Calibration and Compressor Delay: Supports temperature calibration and compressor delay which can protect your refrigeration

 

This controller can control both a heating and cooling device.  Alternatively, it can control a heating or a cooling device.

In my opinion the original ITC-308 was and is a game changer as far as homebrew temp controllers.  In comparison to available controllers available at the time the ITC-308 was released, it offered loads more features, including dual stage control, for a fraction of the price.  Game changer!  The addition of Wi-Fi control and monitoring to this great controller has made a great temp controller even better.  Check out our Hands on Review of the ITC-308.  That includes a section on the WiFi version.

Inkbird WiFi ITC-308 Digital Temperature Controller Thermostat Remote Monitoring Controlling Home Brewing Fermentation Breeding Incubation Greenhouse – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Updated: 5/3/2024


Also: Yeast Starters & Fermentation | Kegerator Tips & Gear | Inkbird ITC308 Review

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. ssprod:B07PVBG8K1:ptr

Govee WiFi Thermometer + Four Probes – iOS & Android

Govee WiFi Meat Thermometer, Wireless Meat Thermometer with 4 Probe, Smart Bluetooth Grill Thermometer with Remote App Notification Alert, Digital Rechargeable BBQ Thermometer for Smoker Oven Kitchen

Govee WiFi Thermometer

More Info


Highlighted Features
  • Anywhere Remotely Monitor Temperature: Our smart meat thermometer sends instant notifications to the Govee Home App and your digital thermometer when any temperature goes outside your presets.(Note: not support 5G.)
  • 28 USDA-Meat Preset Temperature: Govee wireless WiFi meat thermometer will provide suggestions based on user needs for foods such as beef, lamb, chicken, pork, turkey, and more, Grill more efficiently, whether you're a beginner or a professional.
  • Accurate and Versatile: Our food-grade probes have a measuring range of 32°- 572°F with ±1.8°F/1°C accuracy, and you can monitor multiple food temperatures at once. Perfect for smoking, grilling, BBQ, and oven cooking.
  • Long Lasting Battery: With a 3000mAh rechargeable battery, our meat thermometer lasts up to 40 hours on a full charge. Plus, it's eco-friendly and convenient.
  • Important Note: Please avoid exposing the probe to open flames or water immersion for accurate measurements. If you encounter any issues, please contact us for assistance.

 

Govee WiFi Meat Thermometer, Wireless Meat Thermometer with 4 Probe, Smart Bluetooth Grill Thermometer with Remote App Notification Alert, Digital Rechargeable BBQ Thermometer for Smoker Oven Kitchen – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

2 x Chalkboard Beer Tap Handles w/Top Logo – $16.99… $8.50 each! best price + free prime ship

2 Pcs Wooden Chalkboard Beer Tap Handle Keg Tap Handle and 2 Pen for Bar Restaurant Wedding Brewery Craft Display Beer Lovers Homebrew

2 Pcs Wooden Chalkboard Beer Tap Handle Keg Tap Handle and 2 Pen for Bar Restaurant Wedding Brewery Craft Display Beer Lovers Homebrew

More Info


Highlighted Features
  • What You Will Receive: the package contains 2 pieces of chalkboard beer tap handles, 2 pieces of erasable pens, enough to meet your daily use needs and replacement requirements
  • Reliable and Suitable: the beer handles are made of quality wooden materials, practical and dirt resistant, which are suitable for most standard beer barrels, easy to install and smooth to write, providing you with a nice using experience
  • Record Message: the beer keg handles will help you to record useful messages, such as date, time, name of beer and more, which are nice tools for you; You could use the included erasable pens to easily record and update information
  • Wide Application: the beer handle taps can be widely adopted on many different occasions, such as bars, restaurants, home and many other places; You could also use them in many parties, since the classical appearances are easy to match most areas
  • Charming Gift Options: beer tap handles will be loved by beer lovers, brewery owners, and they can be applied as chic gifts on birthday, Valentine's Day, anniversary, engagement party, housewarming and so on

 

These tap handles have a top circle for your logo (or really whatever you want to put there) and a chalkboard section at the bottom for beer name or style (or really whatever you want to put there).

10/31 7:30 PM Central: These are selling for just $16.99. That’s the best historical third party Amazon price I found, notwithstanding Lightning Deals or coupons. Shipping is also free to many US addresses with Prime Membership [Try Prime for Free] or a qualifying order. Prices and availability can change quickly Check product page for current info – More About Prices

2 Pcs Wooden Chalkboard Beer Tap Handle Keg Tap Handle and 2 Pen for Bar Restaurant Wedding Brewery Craft Display Beer Lovers Homebrew – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

30 Pack Beer Faucet Plug Caps/Brushes – $14.99… 50 cents each

Beer Plugs Tap Brush,30 Pack Beer Faucet Tap Cleaning Plug Hygiene Brush For Draft Beer Faucet Cap

More Info


Highlighted Features
  • Convenient Cleaning- Our brush is great to keep your beer faucet clean.It fits with different kinds of beer tap sizes,helps to make cleaning tap become effortless and easy.
  • The wire can not be pulled out of the handle because of our Advanced welding process of the handle and wire.
  • High Quality - Featuring a new strengthening technology,the bristles of beer brushes are tightly entwined in twisted wire
  • Easy to Use - Simply insert the plug into your beer tap opening to keep your beer from dust and other contaminates.
  • Safe Material- Our brush handle is made of food grade polypropylene,the brush head is made of bristles

 

10/30 9 AM Central: These are on sale for just $14.99. Shipping is also free to many US addresses with Prime Membership [Try Prime for Free] or a qualifying order. Prices and availability can change quickly.  Check product page for current info – More About Prices

Beer Plugs Tap Brush,30 Pack Beer Faucet Tap Cleaning Plug Hygiene Brush For Draft Beer Faucet Cap (Blue) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Intertap Tower AND Faucet – on sale for… $44.99

Single Tap Tower Kit | ABS Plastic | Intertap® Chrome Plated Faucet

Single Tap Tower Kit | ABS Plastic | Intertap® Chrome Plated Faucet

More Info

From the product description, check product page for current description, price and availability:

Single tap tower with reflective chrome finish. The tower is made from ABS plastic. Includes polished chrome Intertap forward-sealing faucet, faucet handle, and tower shank with 6mm (0.24″) barbed tailpiece. Mounting screws included.


Intertap Stainless Steel, Forward Sealing Faucet from MoreBeer.  Unique modular threaded spout design can fit a variety of attachments.

Intertaps are awesome!  Check out my Hands on Review of these great faucets.

  • This combo is on sale for just $44.99. That’s a bargain
  • Get Free Shipping: Shipping is free with a qualifying $59 order to many US addresses
  • Some filler item ideas to help you qualify for free shipping… PBW, Sale Items (shows most popular deals first), Hop Market (shows most popular deals first)

Single Tap Tower Kit | ABS Plastic | Intertap® Chrome Plated Faucet KG371KIT

Also: Intertap Forward Sealing Stainless Steel Beer Faucet D1210Complete Lineup of Intertap Faucets and Accessories


intertap faucet review


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

Continue reading

Fight the First Foamy Pint!… Brass Cold Block for Kegerator Chilling Lines – $11.95 + free shipping

Brass Square Cold Blocks (Set of 2), Small

Brass Square Cold Blocks

More Info

Highlighted Features
  • Set of 2
  • Brass Material
  • Fits standard sized shanks
  • For Kegerator Chilling Lines

 

This threads onto a standard beer shank and accepts a glycol line.  The idea is to keep  your shanks cold and reduce foam.

Note that this does not include the pictured shank. Also, the picture says the 2nd cold block is for display only, while the description (at least as of this update) says this is for a set of 2.

Continue reading

Finding Faucet Locks for Perlick Faucets

Perlick Wrap Around Draft Beer Faucet Lock - Kegerator Bar Security - All Models

Finding Faucet Locks for Perlick Faucets

A faucet lock allows you to secure your faucet to prevent unwanted use.  Kids, visitors, etc.

Perlick makes two models…

  • 308-40B works with Perlick 307, 425, 408, 410 and the 525SS faucets.
  • 308-40C works with Perlick 600 Series Faucets

Availability on these can be touch and go.

Here are some Amazon offerings that are periodically available…

I’ve also found that eBay can be a good spot for these

Search: 308-40b and 308-40c on eBay

Continue reading

Tap Board Black Dry Erase Tap Handle

Tap Board Black Dry Erase Tap Handle

Tap Board Black Dry Erase Tap Handle

More Info


Highlighted Features
  • Made of fine walnut with a black dry erase surface
  • Easy to write on and erase
  • Saves time and money by allowing you to use the same tap handle for every keg
  • Fits all US faucet lever threads

 

Tap Board Black Dry Erase Tap Handle – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Ends Today: Save on Recently Released NukaTap Mini Faucets!

The Nukatap Mini is the first small beer faucet with big faucet features, like forward sealing, an optional self closing spring, laminar flow to minimize foaming, and a removable stainless spout. It also has new innovations like integrated over molded Santoprene® seals, which will last the life of the faucet without replacement. The faucet body is molded from POK plastic which can withstand autoclave temperatures, and the over molded seals can withstand the harshest cleaning chemicals. Over molded seals get rid of O rings, eliminating the places behind O rings where crud and bacteria can hide.The Nukatap Mini is the first small beer faucet with big faucet features, like forward sealing, an optional self closing spring, laminar flow to minimize foaming, and a removable stainless spout. It also has new innovations like integrated over molded Santoprene® seals, which will last the life of the faucet without replacement. The faucet body is molded from POK plastic which can withstand autoclave temperatures, and the over molded seals can withstand the harshest cleaning chemicals. Over molded seals get rid of O rings, eliminating the places behind O rings where crud and bacteria can hide.

Due to it being made of POK plastic with a POK molded shuttle, the first pour from a Nukatap Mini will have less foam than from a conventional metal faucet due to the fact that cold beer cools down POK plastic faster than it does metal. The POK plastic also insulates better than brass or stainless, a helpful feature between pours.

The Mini debuts a new shank system which eliminates the need to drill a 7/8” hole in your cooler or refrigerator door. The new Nukatap Mini Shanks (available for 8mm and 6.5mm Evabarrier tubing) use EvaBarrier tubing to draw the beer right to the tap, and are secured with three screws to the outside, preventing the shank from rotating, a common problem with metal shanks and coolers.


Some retailers have struggled to keep Nukatap Mini in stock. They’ve been out of stock for months at a time. As of this update nearly all options and accessories are in stock at William’s Brewing

  • For a limited time William’s Brewing is discounting Nukatap Mini Faucets and Accessories by 15%. 
  • No coupon code necessary, discount reflected in cart.
  • Shipping is free or reasonably priced flat rate to addresses in the contiguous US depending on your order size for most items.

Nukatap Mini Faucet & Shanks

Continue reading