Category Archives: Kegerator

Wrap Around Kegerator Drip Tray Bar Mat

12×7 inches PVC Drip Tray for Home Brewing, Kegerator (Black)

12×7 inches Drip Tray for Home Brewing, Kegerator

More Info
Highlighted Features
  • Overall Dimensions: 12"x 7" x 1/2"(thick)
  • Cutout Dimensions: 4.5" x2", Suits most Tower Base
  • Material: Made of non-toxic PVC, safe and anti-corrosion.NO WORRY about rust any more!
  • A Soft PVC Drip Tray Will Definitely be a good helper for your home brewing equipment.
  • Lay flat on counter top.
Learn More

 

12×7 inches PVC Drip Tray for Home Brewing, Kegerator (Black) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading →

25 x Oetiker Style Stainless Clamps [13.3 mm]

Oetiker 16700010 Stepless Ear Clamp, One Ear, 7 mm Band Width, Clamp ID Range 10.8 mm (Closed) - 13.3 mm (Open) (Pack of 25)

Oetiker 16700010 Stepless Ear Clamp, One Ear, 7 mm Band Width, Clamp ID Range 10.8 mm (Closed) – 13.3 mm (Open) (Pack of 25)

More Info

From the product description, check product page for current description, price and availability:

  • Genuine oetiker clamps
  • 360° stepless design – no steps or gaps on inner circumference
  • Narrow band, concentrated seal compression
  • Specially formed strip edges reduce the risk of damage to the part being clamped
  • Please note – the size of the clamp denotes the inner dimension (id) of the clamp

 

I’m a big fan of Oetiker style clamps, especially in my kegerator.  See: Oetiker Stepless Clamps for Kegerator Gas and Beer Lines.

What are Other’s Saying?   Search this product’s Amazon reviews for “beer” – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

  • A sizing note – Oetiker Stepless clamp sizes generally refer to the largest diameter in mm.  As an example a size 13.3 usually means that the Oetiker Stepless clamp is 13.3 millimeters (about .52″) in diameter uncrimped.
  • 13.3 mm is about .52″, 10.8 is about .43″
  • Also Consider: Oetiker Clamp Tool via Keg Connection
  • Also Consider: Hands on Review: Kegland DuoTight Fittings & EVABarrier Tubing! – no clamps!

Oetiker 16700010 Stepless Ear Clamp, One Ear, 7 mm Band Width, Clamp ID Range 10.8 mm (Closed) – 13.3 mm (Open) (Pack of 25) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources
standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

2 Way CO2 Manifold w/Shutoffs & Check Valves

Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold - Splitter 5/16" Barb Fittings (2 way 5/16" Barb)

Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold – Splitter 5/16″ Barb Fittings (2 way 5/16″ Barb)

More Info

From the product description, check product page for current description, price and availability:

  • The gas manifold body is made of high quality aluminum. The inlet barb & hexagon nut is made of brass. The switch valve is made of copper plated zinc.So our gas manifold is lighter & durable than steel
  • 2 way gas manifold allow you to supply CO2 for your several beer kegs. The gas manifold also provide the extra gas inlet for beer keg
  • 【No Leaks & Independent Shunt】: The integrated check valves can prevent backflow of gas or liquid and protect your splitter. Every switch valve has their handles to control the gas flow,so each gas line will not affect the airflow of other kegs
  • 【Easy To Use】: The gas manifold come with 5/16″ barb OD outlets & inlets. Inlet barb can connect with CO2 tank by hose. And the barb of shutoff valve can connect with your keg by hose to achieve carbonating beer
  • 【Faster To Install】:Just need two screws or nails,you can easily secure this gas manifold on walls or kegerators. A gas manifold can split the delivery of CO2 into several parts to serve the draft beer system

 

Use to pressurize multiple kegs off one co2 regulator.

Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold – Splitter 5/16″ Barb Fittings (2 way 5/16″ Barb) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Up to 40% Off ThermoWorks Fridge & Freezer Thermometer [Monitor Kegerator & Fermentation]

Fridge/Freezer Thermometer (RT615)

For a short time, ThermoWorks is discount refrigerator and freezer thermometers by up to 40%.

You can use these for a lot of things including to monitor your kegerator, beer fridge fermentation chamber or your general fermentation area.

No coupon code necessary. Check ThermoWorks for current availability and pricing.

Refrigerator and Freezer Thermometers at ThermoWorks

Fridge/Freezer Thermometer (RT615)

Mk4 Closeout!

https://www.homebrewfinds.com/thermoworks-thermapen-mk4-deal

Going to Buy Something Else??  We have one time use 10% off coupons.  Those do not work with sale items but the will work with everything else.  If you’re planning to get something else along with this sale item… Get a coupon

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Check sale or product page for current availability & pricing

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

Four Way CO2 Manifold w/Shutoffs & Check Valves

4-Way Gas Manifold CO2 Distributor Manifold 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves Homebrew Beer Making Brewing Tool

4 way CO2 Manifold

From the product description, check product page for current description, price and availability:

  • Gas Manifold, A built-in check valve protects your shunt and prevents gas backflow.
  • Due to the one-way valve mechanism, the pressure drop between the ball valves in these manifolds is approximately 2 psi. You will need to set the pressure on the regulator to 2 psi above the pressure required in the keg.)
  • Run multiple lines from one CO2 source. The distributor allows you to split the gas supply into multiple lines. Each line has its own shutoff valve.
  • There is a 2-point screw hole on the top for easy installation to other equipment. 5/16″ barbed inlet and 5/16″ barbed outlets.

Use to pressurize multiple kegs off one co2 regulator.

4-Way Gas Manifold CO2 Distributor Manifold 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves Homebrew Beer Making Brewing Tool – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Intertap Beer Shank – $11.99 + Free Ship Eligible, Limited Availability

Intertap Beer Shank - Short Tower D1239

Intertap Beer Shank – Short Tower via MoreBeer

From the product description, check product page for current description, price and availability:

This shank’s small design makes it perfect for attaching a faucet to a tower.  Included on the Intertap towers that we stock but can be used to replace the short shank on any 3″ diameter tower. Made from stainless steel.

Limited Availability Deal of the Day: As of this posting, this is marked down to $11.99 as a MoreBeer Deal of the Day. Shipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

Intertap Beer Shank – Short Tower D1239

Closely Related…

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

DC Motor Stepless Speed Controller [Stir Plate Project, Kegerator Circulation]

PWM Motor Speed Controller DC 6V 9V 12V 24V 36V 48V 60V Pulse Width Modulation Regulator 10A 400W Stepless Variable Spee Forward and Reverse Switch DC Speed Regulation

PWM Motor Speed Controller DC 6V 9V 12V 24V 36V 48V 60V Pulse Width Modulation Regulator 10A 400W Stepless Variable Spee Forward and Reverse Switch DC Speed Regulation

More Info

From the product description, check product page for current description, price and availability:

  • ★PWM DC Motor Speed Controller, Work Voltage: 9V-60V; Output Current: 0A-10A; Continuous Power:400W (max)
  • ★Speed Range: 0%-100%; Control Frequency: 21KHZ, adopting current adjusting, PWM to control light and speed.
  • ★Linear regulate motor speed by potentionmeter, support forward / reverse rotation regulation.
  • ★Adopting advanced technology, high efficient, large torque, low heat etc. performance.
  • ★Can be widely used for DC brush motor speed controlling, light dimming in DC circuit, PWM can take full advantage of power energy.

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

PWM Motor Speed Controller DC 6V 9V 12V 24V 36V 48V 60V Pulse Width Modulation Regulator 10A 400W Stepless Variable Spee Forward and Reverse Switch DC Speed Regulation affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Keg Connection Beer Line Cleaning Kit – $18 for HBF Readers!

beer line cleaner

Beer Line Cleaning Kit from Keg Connection

More Info

From the product description, check product page for current description, price and availability:

Premium Pressurized Line Cleaning Kit for use with Beer Couplers or home brew lines.

The Beer Line Cleaning Kit, Gravity Feed is just what you need to clean your lines. With our easy to follow instructions you will no longer dread cleaning day. Only taking 30 min from start to finish and only about 10 min of that is you working!

General Info:

  • Detailed, illustrated , easy to use instructions included!
  • Featuring 8 oz. bag of “Brew Clean” – a safe, and easy powered form cleaner, Made in the USA!
  • Assembled in the USA from Domestic and foreign components.
  • Metal Faucet Wrench, Made in the USA!
  • Bottle is marked in both ounces and ML and is Made in the USA.
  • Ball Lifter for holding check valve ball on beer coupler (also called tap) open so liquid can pass through beer coupler (no need to remove like some cleaning kits!)
  • Plastic connection for connecting the cleaning line directly to the tower or standard shank
    High quality faucet brush is included.

 

This setup works with all types of keg connections because it connects by removing your faucet. Keg Connection also has a Ball Lock Version that’s setup to work specifically with ball lock lines.

Beer Line Cleaning Kit

Also Consider:

ball lock jumperStainless Steel Ball Lock Jumper with Food Grade Silicone O-Rings: Allows you to connect multiple ball lock runs to clean multiple lines and taps at the same time. Works with both liquid and gas QDs.  Stainless Steel Ball Lock Jumper – via Valuebrew – An easy add-on… food grade o-rings, featured in our Keg Rebuild Post



Some everyday great deals and unique items at Keg Connection…

Parts and Diagrams:

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. rp:kclckit

25% Off Manifolds at Keg Connection, HBF Readers Save More + Easy Conversion to DuoTight

kegerator co2 manifold

Why a Manifold?  CO2 manifolds allow you to feed multiple kegs off one co2 regulator.  Things to look for in a capable manifold are shut-off valves for each trunk and check valves.  Check valves makes sure flow goes the right directly.  This is important for CO2 manifolds because differences in pressure make it possible for liquid to back flow through gas lines.

Keg Connection has an extensive lineup of CO2 manifolds. They sport check valves, MFL barbs (choose from 1/4″ or 5/16″) and ball valves for each run.  the body is crafted from extruded aluminum.  These are also tested for leaks.  2, 3, 4, 5, 6, 7 and 8 way configurations are available

  • For a short time Keg Connection has their entire lineup of manifolds marked down 25%.
  • Prices start at just $17.96.  No coupon code necessary, discounts reflected on each product page.
  • Shipping is a flat fee no matter how much you order to addressed in the contiguous US.
  • HBF Readers Save More! HBF5OFF takes another 5% off.

Air Distributors at Keg Connection

Continue reading →

San Jamar Stainless Steel Single Rail Speed Rack Bottle Holder – Drip Tray or For Your Bar

San Jamar B5522 Stainless Steel Single Rail Speed Rack Bottle Holder, 21-1/4" Width x 6" Height x 4-1/8" Depth

San Jamar B5522 Stainless Steel Single Rail Speed Rack Bottle Holder, 21-1/4″ Width x 6″ Height x 4-1/8″ Depth

More Info

From the product description, check product page for current description, price and availability:

  • Easy Access – The perfect solution for organizing quart and liter bottles for quick service behind the bar
  • Durable Construction – Stainless steel construction resists rusting and is easy-to-clean for extended use
  • Single Speed Rail – Holds up to (5) 1-quart bottles
  • Hangar Straps – Single speed rails can be fitted with unique hangar straps for portable use (sold separately)

 

This is generally intended to be used as part of a bar to hold bottles for easy access.  You could also use it as a drip tray.  I like that it has mounting holes and a bit of a backsplash.

San Jamar B5522 Stainless Steel Single Rail Speed Rack Bottle Holder, 21-1/4″ Width x 6″ Height x 4-1/8″ Depth – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Inkbird ITC-306T Temp Controller [Heat Only]

nkbird ITC-306T Pre-Wired Electronic Heating Thermostat Temperature Controller

nkbird ITC-306T Pre-Wired Electronic Heating Thermostat Temperature Controller

by Inkbird

More Info

From the product description, check product page for current description, price and availability:

  • 👏👏【Convenient Design】Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.
  • 👏👏【Dual Display Window】Be able to display measured temperature and set temperature at the same time.Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).
  • 👏👏【Dual Time Cycle Setting】Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
  • 👏👏【Only Heating】Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
  • 👏👏【Sensor Length 】2m / 6.56ft

 

Note that this controls heat only. If you’re looking for a dual stage controller, consider the ITC-308. Related Resource Post: Maintaining Fermentation Temps in Colder Weather

nkbird ITC-306T Pre-Wired Electronic Heating Thermostat Temperature Controller – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Yeast Starters & Fermentation | Kegerator Tips & Gear | Inkbird ITC308 Review

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

6.5″ Solid Maple Tapered Chalkboard Tap Handle made in Middlebury, VT

6.5" Solid Maple Tapered Chalkboard Tap Handle

6.5″ Solid Maple Tapered Chalkboard Tap Handle by Maple Landmark

More Info

From the product description, check product page for current description, price and availability:

  • Maple hardwood and chalkboard application is great for designing your own unique tap handle
  • The bottom has a ferrule that fits onto all standard bar taps
  • The wood grain pattern will vary due to the natural properties of wood
  • The tap handle measures 6.5″ high, 15/16″ thick, and 2.5″ tapering to 1.5″ wide
  • Made in Middlebury, Vermont, USA

 

6.5″ Solid Maple Tapered Chalkboard Tap Handle – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Coldbreak Brewing Stainless Steel Forward Sealing Faucet

Coldbreak Brewing Equipment Forward Sealing Beer Faucet, Wine Faucet, Stainless Steel, Black Tap Handle Included, Standard

Coldbreak Brewing Equipment Forward Sealing Beer Faucet, Wine Faucet, Stainless Steel, Black Tap Handle Included, Standard

More Info

From the product description, check product page for current description, price and availability:

  • Commercial stainless steel wine faucet with stainless steel lever
  • Easy to take apart and clean
  • Polished interior and forward sealing design for smooth operation
  • Standard tap threads (black tap handle included)

 

Coldbreak Brewing Equipment Forward Sealing Beer Faucet, Wine Faucet, Stainless Steel, Black Tap Handle Included, Standard – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also:

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

K&B Stout Beer Faucet

K&B Stout Beer Faucet

K&B Stout Beer Faucet

More Info

From the product description, check product page for current description, price and availability:

  • Body made of chrome plated brass
  • Nozzle is made of stainless steel (so 304) for durability and preventing off flavors
  • Thread 3/16 – 16 unci
  • Connection is standard us 60 teeth connector
  • Nitro tap stout style faucet

 

K&B Stout Beer Faucet – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Mounting Board for DuoTight Inline Regulators – on sale from… $10.50 via William’s Brewing

Mounting Boards at William’s Brewing. Thank you to /u/skaht on reddit for this photo

Gas Board for Duotight In-Line Regulators via William’s Brewing

More Info

From the product description, check product page for current description, price and availability:

This sturdy food grade polypropylene board features drilled holes for up to 4 Duotight Regulators (item C11). Drilled mounting holes are also included so that once you mount the regulators and DuoTight fittings/tubing to the board, you can also install the board in a convenient location. Also included are cutout boxes so you can line up 4 labels above the regulators.

Note that pictured regulators, screws, Duotight fittings, labels, and EvaBarrier tubing are not included. This is just a base board. 12″ wide, 10.25″ tall, and 3/8″ thick.

 

This allows you to easily mount multiple Duotight In-Line Regulators.  Those regulators allow you to easily (and cheaply) set individual pressures and carbonation levels.

The DuoTight lineup is awesome… Hands on Review: DuoTight Fittings & EVABarrier Tubing!

Polypropylene Gas Board for 4 Inline Regulators

Polypropylene Gas Board for 6 Inline Regulators

Clearance Sale at William’s Brewing!

Check sale or product page for current availability & pricing

More DuoTight!

duotightreview

Continue reading →

Inkbird ITC-306T Temp Controller [Heat Only]

nkbird ITC-306T Pre-Wired Electronic Heating Thermostat Temperature Controller

nkbird ITC-306T Pre-Wired Electronic Heating Thermostat Temperature Controller

by Inkbird

More Info

From the product description, check product page for current description, price and availability:

  • 👏👏【Convenient Design】Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.
  • 👏👏【Dual Display Window】Be able to display measured temperature and set temperature at the same time.Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).
  • 👏👏【Dual Time Cycle Setting】Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
  • 👏👏【Only Heating】Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
  • 👏👏【Sensor Length 】2m / 6.56ft

 

Note that this controls heat only. If you’re looking for a dual stage controller, consider the ITC-308. Related Resource Post: Maintaining Fermentation Temps in Colder Weather

nkbird ITC-306T Pre-Wired Electronic Heating Thermostat Temperature Controller – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Yeast Starters & Fermentation | Kegerator Tips & Gear | Inkbird ITC308 Review

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Inkbird IBS-TH2 Logging Thermometer AND Probe [Monitor Kegerator & Fermentation Temps] – works with Android & iOS

Inkbird Smart Thermometer Temperature and Humidity Monitor Hygrometer Indoor, Free APP for iOS and Android, IBS-TH2 Plus Version Supports External Temperature Probe and Digital Display

Inkbird Smart Thermometer Temperature and Humidity Monitor Hygrometer Indoor, Free APP for iOS and Android, IBS-TH2

More Info

From the product description, check product page for current description, price and availability:

  • 🌡Maximum range of 98ft(without obstacle) via Bluetooth connection
  • 🌡Built-in temperature & humidity sensor, stores a maximum of 30,000 points of data on the device. Temperature sensor -40℉~140℉ and humidity 0%RH-99%RH
  • 🌡Graph, accuracy calibrating, high/low-temperature alarm notification, data export, and the sampling interval set are supported via the app.Please note that IBS-TH2 is not compatible with the gateway (IBS-M1)
  • 🌡Digital LCD displays temperature and humidity, Bluetooth signal, and remaining battery power. An external waterproof temp probe is included
  • 🌡Smart thermometer supports connection to multiple phones or reading multiple sensors with one cellphone

 

Possible uses include monitoring kegerator temperatures, beer fridge temperatures and fermentation chamber/area temperatures.

This includes a waterproof temperature probe. From what I’ve gathered it looks like you can use it with or without the probe.

This has a hygrometer function as well.  That shows % relative humidity and could be handy for judging whether your Eva Dry (or similar) needs recharged for the purpose of handling excess kegerator and fermentation chamber wetness.  See: Damp Kegerator? Fix Kegerator Condensation

Inkbird Smart Thermometer Temperature and Humidity Monitor Hygrometer Indoor, Free APP for iOS and Android, IBS-TH2 Plus Version Supports External Temperature Probe and Digital Display – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

DC Motor Stepless Speed Controller [Stir Plate Project, Kegerator Circulation]

PWM Motor Speed Controller DC 6V 9V 12V 24V 36V 48V 60V Pulse Width Modulation Regulator 10A 400W Stepless Variable Spee Forward and Reverse Switch DC Speed Regulation

PWM Motor Speed Controller DC 6V 9V 12V 24V 36V 48V 60V Pulse Width Modulation Regulator 10A 400W Stepless Variable Spee Forward and Reverse Switch DC Speed Regulation

More Info

From the product description, check product page for current description, price and availability:

  • ★PWM DC Motor Speed Controller, Work Voltage: 9V-60V; Output Current: 0A-10A; Continuous Power:400W (max)
  • ★Speed Range: 0%-100%; Control Frequency: 21KHZ, adopting current adjusting, PWM to control light and speed.
  • ★Linear regulate motor speed by potentionmeter, support forward / reverse rotation regulation.
  • ★Adopting advanced technology, high efficient, large torque, low heat etc. performance.
  • ★Can be widely used for DC brush motor speed controlling, light dimming in DC circuit, PWM can take full advantage of power energy.

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

PWM Motor Speed Controller DC 6V 9V 12V 24V 36V 48V 60V Pulse Width Modulation Regulator 10A 400W Stepless Variable Spee Forward and Reverse Switch DC Speed Regulation affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Inkbird Dual Stage Digital Temp Controller AND NTC Sensor

61gtirtn6ql-_sl1100_

Itc-308 Dual Stage, Pre-Wired Digital Temperature Controller by Inkbird

Dual stage means that the Itc-308 can control both a heating and cooling device.  Alternatively, it can control a heating or a cooling device.  This controller displays in Fahrenheit and Centigrade.  Dual Display shows both measured and set temperature.

Use to control fermentation or kegerator temperatures.  I have a similar (although not identical) controller from Inkbird.  The base unit is the same (ITC-308), the temperature sensors are different.  Check out my [Hands on Review] of that unit.

Inkbird Aquarium Dual Stage Temperature Controller + NTC Sensor, AC 100V – AC 240V. (ITC-308S + 1.97″ NTC Probe)


prod:B01ANCB24W

Two Pressure CO2 Regulator [multiple carbonation levels and more]

MOD Complete MDC99007 CO2 Beer Regulator Dual Pressure

More Info



 

Why a two pressure regulator?  A two pressure regulator gives you the ability to keep kegs at different pressures.  This is a requirement to maintain two distinct carbonation levels.  It’s also handy if you want to force carbonate a keg more quickly, at a higher pressure, while maintaining your standard serving pressure on a keg that’s already being served or if you want to have a utility line for purging kegs and such.

MOD Complete MDC99007 CO2 Beer Regulator Dual Pressure Kegerator Heavy Duty Features T-Style Adjusting Handle – 0 to 60 PSI-0-3000 Tank Pressure CGA-320 Inlet w/ 3/8″ O.D. Safety Discharge 50-55 PSI – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon