Kegland MK4 Two Pressure Regulator – on sale for… $82.99
Kegland MK4 Twin Gas Regulator
More InfoFrom the product description, check product page for current description, price and availability:
The MK4 Dual Pressure Regulator by KegLand provides a reading of keg dispensing pressure, as well as an accurate indication of cylinder gas level. By turning the center knob, you can adjust the dispensing pressure from 0 – 90 PSI. The MK4 features gauges housed in rubber to protect them from dings, as well as a large 2½” diameter diaphragm so it can both handle several kegs at once if needed, and the large diaphragm also lets you have precise control over the dispensing pressure (which you adjust with the center knob). This model has two bodies, so you can have two different dispensing pressures out of one C02 Cylinder.
Includes ¼” male flare outlets and Z93 8mm Duotight tubing adapters so you can connect either traditional threaded ¼” gas lines or 8mm Duotight tubing. Includes a safety relief valve, but does not have a check valve built into the bottom inlet. This regulator includes two nylon tank sealing washers, and will accept nylon or fiber tank sealing washers.
The high pressure gauge threads are traditional right hand, as are the threads for the lower flare outlet fitting.11½” long, this regulator needs to be attached to a C02 tank that is firmly secured to prevent it from falling over for safety.
This is a multi gas regulator, and can be used with nitrogen gas tanks if you purchase optional adapter D15.
If you want to convert this to accept 5/16″ inner diameter gas tubing (common in older kegerators), you will also need to order item D87 Concave Washer and item D08 5/16″ Swivel Barb fitting for each outlet.
A two pressure regulator gives you the ability to keep kegs at different pressures. This is a requirement to maintain two distinct carbonation levels. It’s also handy if you want to force carbonate a keg more quickly, at a higher pressure, while maintaining your standard serving pressure on a keg that’s already being served or if you want to have a utility line for purging kegs and such.
- For a short time William’s Brewing is discounting their entire lineup of CO2 regulators and accessories by 15%.
- No coupon code is required. Discounted prices show up in cart.
- Shipping is free or reasonably priced flat rate to addresses in the contiguous US depending on your order size for most items.
William’s Brewing Regulator Sale
The MK4 two pressure regulator is included in the mix and just $82.99 at checkout with the sale.
Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds
Our Top Draft Resources!
Check our our Top Draft Related Resources- Commentary: Pin Lock Keg Pricing and Availability
- Check Your CO2 Regulator for Leaks!
- How to get a keg ready for first use? New Keg Cleaning and Prep
- Portable Draft Beer Serving Options!
- Pin Lock Keg Pricing and Availability
- The Most Difficult Spot to Check for CO2 Leaks
- Keg O-Ring Materials Selection! – EPDM, Silicone and Buna-N?
- Why Do I Have Bubbles in My Beer Line? Diagnosing and Fixing Kegerator Foam Problems
- Five Benefits of Using Corny Kegs As Fermenters
- Rebuilding & Reconditioning Homebrew Kegs!
- Food Safe Replacement Keg O-Rings in Bulk
- Hands on Review: Kegland DuoTight Fittings & EVABarrier Tubing!
- Why Won’t My Beer Carbonate? Fixing Draft Beer Carbonation Problems
- What Does a Flow Control Faucet Do?
- Upgrade Your Kegerator – 6 Improvements!
- Serve Homebrew on Any Kegerator & Convert Commercial Kegerator to Homebrew
- Tips and Gear for Growler Filling
- What’s the Difference Between Ball Lock Kegs and Pin Lock Kegs?
- Checking for Draft System CO2 Leaks – Using The Pressure Gauge Method
- Tip: Consider Oetiker Stepless Clamps for Kegerator Gas and Beer Lines
- Hands On Review: Inkbird ITC-308 Dual Stage Temperature Controller +WiFi Version
- Universal Poppets Tips and Tricks!
- Convert Your Mark II Keg & Carboy Washer to a Recirculating Draft Line Cleaning Pump!
- Step by Step: Finding and Fixing Keg CO2 Leaks
- Kegerator Temperature Probe Placement – To Immerse or Not To Immerse? – three tests to determine optimal pla…
- Kegerator Beer Line Temperatures & Reducing Foam with a Recirculating Fan
- Kegging CO2 Use Estimations and Calculations
- Balancing Your Kegerator Draft System
- Building a Simple Ball Lock Draft Line Flushing Setup
- Build a Recirculating Draft Line Cleaning Pump
- Home Brew Keg Roundup – New & Used, 5 and 2.5 Gallon & More!
- Damp Kegerator? Fix Kegerator Condensation
- Homebrew Temp Controller Roundup! – Kegerator and Fermentation – concepts, applications and models
- Bulk Keg Orings and Keg Parts Reference
This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
pinnedVisit William’s Brewing – Web Only Clearance Sale
williamsPrice, promotions and availability can change quickly. Check the product page for current price, description and availability.
DuoTight Ball Lock QD on Left, Compatible EVABarrier Tubing on Right
Making a pressure capable connection is as easy as pushing the tubing all the way in the fitting and firmly pulling the tubing out.
To disengage the connection press the collar toward the fitting body and pull on the tubing. A couple tools are available to help with this process. See below for photos and links.
