Category Archives: Kegland

20% Off Kegland’s New 65 Watt Pump!

KegLand MKII Magnetic Drive Pump | Center Inlet Pump Head | Stainless Steel | 13.5 GPM | 65 Watt from MoreBeer

More Info

From the product description, check product page for current description, price and availability:

The “Big Brother” to one of our best-selling pumps! Expect the same quality that customers have come to expect from the MKII Pump (PMP500) but with more power. This 65 watt magnetic drive pump is powerful enough for homebrewers and micro brewers alike. Use it to move hot wort in an all-grain system and also to transfer wort from boil kettle to fermenter. The pump head is made from 304 grade stainless steel with 3/4″ threaded ports that can easily be converted to tri-clamp. The magnetic drive allows you to slow down the flow without damaging the pump. This pump is not self-priming so do not run the pump dry. The pump head can be rotated in 60-degree increments, allowing for 6 different pump head orientations.

We recommend adding two 1.5″ T.C. x 3/4″ Female BSPP adapters to the ports. From there you can use a ForgeFit 1.5″ T.C. x Male QD to use quick disconnects with your lines, or convert to your preferred tri-clamp fittings.

Features:

110V / 60hz
Max Head: 15-21 ft.
Max Flow: 13.5 Gal/min
Max Temp: 248°F (120°C)
Rotatable 304 stainless steel pump head
3/4″ BSPT fittings
Water resistant casing

 

20% Off, TWO Coupons to Choose from

  • MoreBeer offering 20% off a single item when you use coupon code TOP5
  • *Code will not work with other coupon codes. Offer not valid on gift cards, items over $1000 or products already on sale & MAP products which have an indication on their product page. Single use per customer. Valid through 1/31
  • Get Free Shipping: This ships for free with a qualify order as part of MoreBeer’s Free Shipping Program.  Under that promo most orders over $59 ship for free.

20% Off at MoreBeer!  use coupon code TOP5

OR… If you’ve used that coupon coupon code MYPICK also takes 20% off a single item – valid through 1/28.

This works with Kegland’s 65 watt pump!

KegLand MKII Magnetic Drive Pump | Center Inlet Pump Head | Stainless Steel | 13.5 GPM | 65 Watt PMP502

Also:

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. rpu:b3pumpbattle tag:b3peroff

20% Off Intertap Faucets! + Hands on Review

Intertaps are awesome!  Check out my Hands on Review of these great faucets.

In addition to forward sealing faucets Intertap also features some really interesting accessories… Ball Lock Spout (allows you to attach a ball lock QD right to the faucet), Growler Filler and Stout Spout – All Intertap Faucets and Accessories.

Intertap Faucets and Accessories

  • MoreBeer offering 20% off a single item when you use coupon code TOP5
  • *Code will not work with other coupon codes. Offer not valid on gift cards, items over $1000 or products already on sale & MAP products which have an indication on their product page. Single use per customer. Valid through 1/31
  • Get Free Shipping: This ships for free with a qualify order as part of MoreBeer’s Free Shipping Program.  Under that promo most orders over $59 ship for free.

20% Off at MoreBeer!  use coupon code TOP5

OR… If you’ve used that coupon coupon code MYPICK also takes 20% off a single item – valid through 1/28.

Check sale or product page for current availability & pricing


intertap faucet review


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:b3peroff

William’s Brewing Kegland Kegerator Sale!

kegland kegerator sale

  • For a limited time William’s Brewing is discounting all Kegland Kegerators by 15%.
  • Use coupon code KEG15 to get the deal
  • Shipping is free or reasonably priced flat rate to addresses in the lower 48 states depending on your order size for most items. This is a huge savings for a large and heavy item like a kegerator

KegLand Kegerators – remember promo code KEG15

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability

Nukatap Faucet Rebuild Kits! + Parts Diagrams

Nukatap Seal Kit

Nukatap Seal Kit

This seal kit is for the Nukatap Faucet and Nukatap Flow Control Faucet. It includes all the parts, including the patent pending Nukatap Shuttle, to reseal either faucet. Does not fit Intertap Faucets

Nukatap Seal Kit

Complete Lineup: Nukatap Faucets and Accessories at William’s Brewing

Nukatap Faucet Diagrams

Reviews of these great faucets



This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. rp:nukataprebuild

KegLand MKII Brewing Pump w/Stainless Steel Head! – BACK in Stock! + Save 20%!

KegLand MKII Magnetic Drive Pump | Inline Pump Head | Stainless Steel | 5 GPM | 25 Watt PMP504

KegLand MKII Magnetic Drive Pump | Inline Pump Head | Stainless Steel | 5 GPM | 25 Watt

From the product description, check product page for current description, price and availability:

  • Magnetic drive enables you to slow down the flow without damaging the pump—just add a ball valve to the outlet!
  • T.C. connection allows the pump head to be oriented at any angle in a full 360-degrees
  • Pull ring PRV at the pump outlet makes it easy to purge air and prime the pump before each use
  • Inline flow path for smooth integration into your brewery while keeping your tubing lines tidy
  • Stainless steel head with 1/2″ threaded ports to attach your preferred fittings—tri-clamp, quick disconnect, camlock, and More!

The best-selling MKII Magnetic Drive Pump now available with a major upgrade! This unit comes standard with an inline stainless steel pump head that installs on the pump body with a 3″ tri-clamp. Compared to the standard “center inlet” pump head, the “inline” flow path can make it much easier to integrate into your brewery and keep your brewing hoses tidy. At the outlet of the pump, there is a very handy pull ring PRV that allows you to bleed liquor or wort from the pump head to release trapped air and prime the pump. And with the 3″ T.C. connection, not only do you have a full 360-degrees to orient the pump head any which way, cleaning the pump after use could not be easier—just pop off the tri-clamp, wash out the pump head, and clamp back on.

Continue reading →

Announcing: Kegland Stainless Steel Auto Glass Rinser

Kegland Stainless Steel Auto Glass Rinser

PET Beer Bottles – 500 mL (Case of 24) from MoreBeer

From the product description, check product page for current description, price and availability:

  • Rinse and chill your glassware before every pour!
  • Install on the countertop of your wet bar or kitchen sink and hook up to your home water supply
  • Invert and push down your glassware to activate the spray action
  • Excellent kitchen accessory for rinsing wine glasses, compact blenders, tumblers, and More!

A push activated glass rinser can be the perfect final touch to your wet bar for the serious home beertender. Install at the edge of your sink and connect to your household’s main water supply. Push down in short bursts to rinse your glass of dust, residual dish soap, and to pre-chill the glass before pouring a pint. These compact glass rinsers are capable of withstanding up to 100 psi of pressure. The 1/2″ BSP threaded rod is compatible with a number of Duotight attachments. We recommend installing with PE Water Line and this 1/2″ adapter.

How to Use:

  1. Invert glass and empty last drips into sink
  2. Press glass onto the center of the glass rinser in short bursts

If you have access to an inline carbonated water source, using bubbly water will really give your glasses a stripping clean. This device can also be used with chilled water to cool your glass down in between beverages.

4.3″ H x 4.5″ W

KegLand Part Number: KL27649

  • Unlike a Lot of Bottle Offerings, These Do Qualify for Free Shipping!
  • Get Free Shipping: This ships for free with a qualify order as part of MoreBeer’s Free Shipping Program.  Under that promo most orders over $59 ship for free.
  • Easy Filler Item….  If you’re looking for a filler item to help you qualify for free shipping, consider grabbing some PBW

Glass Rinser | Push Activated Cup Washer | Stainless Steel D1486

Commentary from HBF:

Glass rinsers are great. You can use them to clean glassed just before serving to chill and wet glassware for a better pour.

The Kegland glass rinser is 1/2″ BSP which from what I’ve been told is compatible with NPT.

The introductory pricing on this ($59.99 as of 1/18/24) is steep in my opinion. Many similar sorts of options are available for a lot less.

Search Amazon for “stainless steel glass rinser” to shop around and compare pricing and specs

Five Star -...image
Five Star - 91037068620 P.B.W. Cleanser - 4 Pounds
$27.98 ($0.44 / Ounce)

Here’s a different model along with a reader submitted video of it in action…

Glass Rinser for Kitchen Sink, Glass Cleaner for Sink, Bar Glass Rinser, 304 Stainless Steel Cup Cleaner for Sink, Cup Washer for Sink-Brush Nickel by Washsh – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This video via Twitter from HBF Reader Dave.  Thanks Dave!…

Continue reading →

Announcing: KegLand Tri-Clamp Pump w/Stainless Steel Head!

 

KegLand MKII Magnetic Drive Pump | Tri-Clamp Inline Pump Head | Stainless Steel | 5 GPM | 25 Watt PMP505

KegLand MKII Magnetic Drive Pump | Tri-Clamp Inline Pump Head

More Info

From the product description, check product page for current description, price and availability:

  • Magnetic drive enables you to slow down the flow without damaging the pump—just add a ball valve to the outlet!
  • T.C. connection allows the pump head to be oriented at any angle in a full 360-degrees
  • Pull ring PRV at the pump outlet makes it easy to purge air and prime the pump before each use
  • Inline flow path for smooth integration into your brewery while keeping your tubing lines tidy
  • Stainless steel head with 1.5″ T.C. ports to attach your preferred tri-clamp fittings

The best-selling MKII Magnetic Drive Pump now available with a major upgrade! This unit comes standard with an inline stainless steel pump head that installs on the pump body with a 3″ tri-clamp. Compared to the standard “center inlet” pump head, the “inline” flow path can make it much easier to integrate into your brewery and keep your brewing hoses tidy. At the outlet of the pump, there is a very handy pull ring PRV that allows you to bleed liquor or wort from the pump head to release trapped air and prime the pump. And with the 3″ T.C. connection, not only do you have a full 360-degrees to orient the pump head any which way, cleaning the pump after use could not be easier—just pop off the tri-clamp, wash out the pump head, and clamp back on.

The MKII is a perfect pump for your system and comes highly recommended for brewers stepping up to all-grain brewing. Rather than schlepping heavy kettles filled with hot liquor or wort around your brewery, or awkwardly stacking them into a 3-tier gravity setup, allow this handy pump to move liquid from vessel to vessel while everything remains in place. The magnetic drive allows you to slow down the flow without damaging the pump. This can be done by attaching a ball valve to the outlet side of the pump, and then you simply open or close the valve to control the flow rate. The pump itself is not self-priming, but priming is super easy thanks to the pull ring PRV which will help ensure the pump head is full of liquid and trapped air is released before powering it on.

Tri-Clamp Pump Head
The T.C. pump head can be removed quickly and easily using the 3″ tri-clamp. This means no drivers or power drills are needed to back out the six Phillips head screws that mount the pump head on the standard version of the MKII. Whip the head off in a flash to clear out spent grain, hop material, or clear a blockage. Attaching the pump head with a tri-clamp also allows the head to be rotated at any angle in a full 360-degrees. This makes it easy to configure the plumbing to your unique brewery setup.

Inline Design
An “inline” pump head simply means the input and output are on a straight horizontal line with one another which can make it easier to integrate into your brewery setup. If you’re using a 3-vessel horizontal system, the inline pump head will make it easier to keep your hoses neat and tidy compared to pumps heads with a center inlet.

PRV Purge Valve
The corny keg style PRV will make priming the pump a breeze. Simply let bleed the pump head to purge air out before turning the pump on and you’ll avoid any cavitation issues. The PRV also acts as a safety so you do not over pressurize your pump head or brewery system.

304 Stainless Steel
The entire pump head is made from 304 grade stainless steel so it’s highly resistant to chemicals, heat, and physical abuse. The 1/2″ BSP threaded ports can be used to attach barbs, quick disconnects, camlocks, tri-clamp adapters, or any other 1/2″ fittings you prefer.

Features:

  • 110V / 60hz
  • Max Head: 11.15 ft. (3.4 m)
  • Max Flow: 5 Gal/min (19L/min)
  • Max Temperature: 248°F (120°C)
  • 360° rotatable stainless steel pump head
  • 1.5″ T.C. ports
  • Water resistant casing (not waterproof)

KegLand Part Number: KL27526

If you’re brewing on a budget and want the most affordable pump possible, check out the standard model MKII pump. This has been our best-selling pump for years and you can always upgrade it down the road with the standard stainless center inlet head or inline stainless tri-clamp head.

 

KegLand MKII Magnetic Drive Pump | Tri-Clamp Inline Pump Head | Stainless Steel | 5 GPM | 25 Watt PMP505

Also: KegLand MKII Magnetic Drive Pump | Inline Pump Head | Stainless Steel | 5 GPM | 25 Watt PMP504

Price, promotions and availability can change quickly. Check the product page for current price, description and availability  tag:b3peroff

The Kegland Fill-O-Meter – Water Measuring Flow Meter Device – on sale for $103.99 w/20% Off Coupon + Hands on Review

Fill-O-Meter - Water Measuring Flow Meter Device BE671

Fill-O-Meter – Water Measuring Flow Meter Device via MoreBeer

More Info

From the product description, check product page for current description, price and availability:

No more spillovers! Set your desired volume and walk away
Automatically collect water while you tend to other tasks
Great for collecting brewing water or mixing your cleaning and sanitizing chemicals
Illuminated display in splash resistant housing
Integrated solenoid valve cuts off flow when your set volume is dispensed
Unlike other hose timers that simply measure time, the Fill-O-Meter measures volume and will automatically turn off when the programmed volume of water is dispensed. Enter your desired volume of water, press Start, and tend to other brew day prep work. Install in-line with your water filter to automatically collect filtered strike water, or measure out how much water you need to mix with cleaning chemicals for a precise dilution ratio.

We recommend setting up the Fill-O-Meter with either Duotight fittings or Type A Camlocks. Thread tape will be required for the Camlock. Use sparingly as too much plumber’s tape can damage the plastic thread. And it is very important to never overtighten!

Displays real time flow rate and volume (Liters/Min or Gallons/Min)
Accurately measures and controls volumes at flow rates from 1-30L/Min (0.26-7.9Gal/Min)
Never overfill or spillover again
Splash resistant housing
Great for filling tanks, brewing kettles, distilling gear, mixing liquid and many other applications
Integrated flow meter and solenoid valve
Illuminated display for usage in the evening
Integrated sound alarm
Easy 1/2″ BSP Inlet and Outlet
Automatic failsafe – flow is stopped if the unit loses power
Important Notes:
DO NOT flow liquid the wrong direction, it will break the unit.
DO NOT overtighten fittings onto the 1/2″ ports.
DO NOT exceed temperatures greater than 104°F (40°C) through the unit.

Specifications:
Power Supply Input: 100-240VAC (50/60Hz)
Power Supply Output: 24V DC, 1.5A
Flow Range: 1-30L per minute
Temperature Range: 32-104°F (0-40°C)
LCD: 3 inch back lit display
Housing Material: ABS
Input/Output threads: G1/2″
Pressure Rating: 0-12bar (0-180psi)
Accuracy: +/- 5%
Please Note: Accuracy can be improved with stable flow. Repeated start/stop or variation in water supply can have negative effect on accuracy.

KegLand Part Number: KL14694

 

20% Off at MoreBeer

  • MoreBeer is taking 20% off a single item when you use coupon code TOP5
  • *Code will not work with other coupon codes. Offer not valid on gift cards, items over $1000 or products already on sale & MAP products which have an indication on their product page. Single use per customer.

20% Off at MoreBeer!  use coupon code TOP5

  • This makes the Fill-O-Meter $103.99
  • Shipping is also free to addresses in the contiguous US
  • Maximize Free Shipping: Sale Items (shows most popular deals first), Kit of the Week, Hop Market (shows most popular deals first)

Fill-O-Meter – Water Measuring Flow Meter Device BE671 – remember promo code TOP5

Hands on Review

Hands on Review: Kegland Fill-O-Meter

Calibration Tip… Correct The Fill-O-Meter to Read In Gallons…

Continue reading →

Ends Soon: Save on Recently Released KegLand TC Breakdown Tri Clamp Pump at William’s Brewing!

KegLand TC Breakdown Tri Clamp Pump

KegLand TC Breakdown Tri Clamp Pump from William’s Brewing

More Info

From the product description, check product page for current description, price and availability:

The KegLand TC Breakdown pump features a type 304 stainless head held on with a 3” Tri Clamp, making it easy to service and remove any spent grain or hop material that may cause a blockage. It features an inline design with 1.5″ Tri Clamp in and out fittings. The Tri Clamp head allows the head to be set at any angle, making it even easier to integrate into your system.

A corny keg compatible PRV valve with pull ring is screwed into the head so you can quickly perge the head to eliminate cavitation, and also acts as a safety valve so you cannot over pressurize your system. Best of all, you can replace it if needed with any corny compatible relief valve.

This 25 watt pump runs on 110 volts, and will pump up to 5 gallons per minute to a height of 11 feet. This performance is based on minimal lift, and keep in mind the higher you pump, the less gallons per minute.

 

  • For limited time William’s Brewing has this on sale for $149.99. That’s a $30 savings.
  • No coupon code required, check product page for availability.
  • Shipping is free or reasonably priced flat rate to addresses in the contiguous US depending on your order size for most items.

KegLand TC Breakdown Tri Clamp Pump

Video on Product Page…

KegLand TC Breakdown Tri Clamp Pump

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. 5.8.23 tag:watchan tag:del Announcing: KegLand TC Breakdown Tri Clamp Pump!

Save on Recently Released KegLand TC Breakdown Tri Clamp Pump at William’s Brewing!

KegLand TC Breakdown Tri Clamp Pump

KegLand TC Breakdown Tri Clamp Pump from William’s Brewing

More Info

From the product description, check product page for current description, price and availability:

The KegLand TC Breakdown pump features a type 304 stainless head held on with a 3” Tri Clamp, making it easy to service and remove any spent grain or hop material that may cause a blockage. It features an inline design with 1.5″ Tri Clamp in and out fittings. The Tri Clamp head allows the head to be set at any angle, making it even easier to integrate into your system.

A corny keg compatible PRV valve with pull ring is screwed into the head so you can quickly perge the head to eliminate cavitation, and also acts as a safety valve so you cannot over pressurize your system. Best of all, you can replace it if needed with any corny compatible relief valve.

This 25 watt pump runs on 110 volts, and will pump up to 5 gallons per minute to a height of 11 feet. This performance is based on minimal lift, and keep in mind the higher you pump, the less gallons per minute.

 

  • For limited time William’s Brewing has this on sale for $149.99. That’s a $30 savings.
  • No coupon code required, check product page for availability.
  • Shipping is free or reasonably priced flat rate to addresses in the contiguous US depending on your order size for most items.

KegLand TC Breakdown Tri Clamp Pump

Video on Product Page…

KegLand TC Breakdown Tri Clamp Pump

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

KegLand MKII Brewing Pump w/Stainless Steel Head! – BACK in Stock! + Save 20%!

KegLand MKII Magnetic Drive Pump | Inline Pump Head | Stainless Steel | 5 GPM | 25 Watt PMP504

KegLand MKII Magnetic Drive Pump | Inline Pump Head | Stainless Steel | 5 GPM | 25 Watt

From the product description, check product page for current description, price and availability:

  • Magnetic drive enables you to slow down the flow without damaging the pump—just add a ball valve to the outlet!
  • T.C. connection allows the pump head to be oriented at any angle in a full 360-degrees
  • Pull ring PRV at the pump outlet makes it easy to purge air and prime the pump before each use
  • Inline flow path for smooth integration into your brewery while keeping your tubing lines tidy
  • Stainless steel head with 1/2″ threaded ports to attach your preferred fittings—tri-clamp, quick disconnect, camlock, and More!

The best-selling MKII Magnetic Drive Pump now available with a major upgrade! This unit comes standard with an inline stainless steel pump head that installs on the pump body with a 3″ tri-clamp. Compared to the standard “center inlet” pump head, the “inline” flow path can make it much easier to integrate into your brewery and keep your brewing hoses tidy. At the outlet of the pump, there is a very handy pull ring PRV that allows you to bleed liquor or wort from the pump head to release trapped air and prime the pump. And with the 3″ T.C. connection, not only do you have a full 360-degrees to orient the pump head any which way, cleaning the pump after use could not be easier—just pop off the tri-clamp, wash out the pump head, and clamp back on.

Continue reading →

7.9 Gallon Gen 2 FermZilla Flat Bottom Fermenter – on sale for.. $31.99 w/coupon + free ship eligible

FermZilla Flat Bottom Fermenter | Gen 2 | 7.9 gal. | 30 L FE145-G2

FermZilla Flat Bottom Fermenter | Gen 2 | 7.9 gal. | 30 L

More Info

From the product description, check product page for current description, price and availability:

The FermZilla Flat Bottom Fermenter is an excellent option for making all kinds of beverages, from beer and wine to kombucha and cold brew coffee. It’s compact, lightweight, and made of brilliantly smooth PET. The extra-large lid opening makes it easy to get your arm inside and scrub the walls clean after use. The Gen 2 version has been updated with a ported bottom and spigot, and includes a newly designed lid with molded in handle grips to make moving the fermenter around much easier.

Why MoreBeer! loves the Flat Bottom FermZilla:

Super smooth PET makes cleaning very easy.
Tight-sealing lid and PET material make for a better oxygen barrier than fermenters made of HDPE.
Lightweight and easy to move around, yet strong enough to be considered shatterproof.
The 4.75″ lid opening makes it easy to get your arm inside and clean after use.
The lid is designed for the easy handling. No additional carboy harness or handle necessary!
Affordable! The Flat Bottom is one of the most affordable plastic fermenters in this size range.
What’s Included:

FermZilla 30L Flat Bottom Fermenter
Spigot
3-Piece Airlock
Adhesive Thermometer
Adhesive Voume Marker
All-in-one carry handle + airlock grommet
Specs:

30 L (7.9 gal) Total Volume
Temperature Rated to 131°F
Height – 18.5″
Height w/ Airlock – 22.5″
Tank Diameter – 13.75″
Kegland Part number: KL14755

 

FermZilla Flat Bottom Fermenter | Gen 2 | 7.9 gal. | 30 L FE145-G2

Save 20%!…

  • Save 20%! MoreBeer is taking 20% off a single item when you use coupon code TOP5
  • *Code will not work with other coupon codes. Offer not valid on gift cards, items over $1000 or products already on sale & MAP products which have an indication on their product page. Single use per customer.

Most FermZilla fermenters are excluded from this promo, but as of this posting, this one is an exception. The coupon makes it just $31.99.

FermZilla Reviews!

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:b3si

Ends Today: Trick Your System Out with DuoTight Fittings & EVABarrier Tubing + Save via MoreBeer Sitewide Sale & Hands on Review

Duotight Push-In Fittings & EVABarrier Double Wall Draft Tubing

Brew More Sale!

MoreBeer is discounting most things, sitewide by up to $45 based on your order size when you use coupon code SAVEMORE.  Some exclusions apply.  Most items bundle with MoreBeer’s Free Shipping.  Under that promo most orders over $59 ship for free.   Check MoreBeer for availability and details.

Grab the complete details and grab the coupon code  – Brew More Save More at MoreBeer!

  • This works on DuoTight Fittings and EVABarrier Tubing!
  • Shipping is also free to most US addresses with a qualifying $59 order. Please note that product prices and availability are subject to change.

DuoTight Push In Fittings & EVABarrier Double Wall Draft Tubing at MoreBeer! – remember promo code SAVEMORE with a $150+ order

More DuoTight!

duotightreview

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:b3brewmore

Brew More, Save More at MoreBeer! – stacking promos + application ideas

As of this posting, MoreBeer is discounting most things, sitewide by up to $65 based on your order size when you use coupon code SAVEMORE.  Some exclusions apply.  Most items bundle with MoreBeer’s Free Shipping.  Under that promo most orders over $59 ship for free.

Grab the complete details and grab the coupon code  – Brew More Save More at MoreBeer!

Some application ideas!….

Continue reading →

Deal of the Day… Kegland New 5 Gallon Ball Lock Corny Keg – $99.99! + Hands on Review

Photo From My Hands on Review

Brand 5 gallon Kegland corny keg from MoreBeer

More Info

From the product description, check product page for current description, price and availability:

Ditch the bottles and start kegging today! Save time, reduce the risk of infection and get all those bottles out of the kitchen for good!

Brand new 5 gallon Kegland kegs offer convenience, security and insurance when compared to used or reconditioned kegs. There’s no need to replace gaskets or other parts, no need to trust that someone else did a good job with reconditioning, and no possibility of residual flavor or aromas getting into your beer!

Features:

  • Ball lock
  • 130 PSI Operating Pressure
  • 5 Gallon (19 L) Capacity
  • Dry Hop Tab Welded into Lid
  • 304 Stainless Steel

Dimensions:

  • Height: 24.75 in.
  • Diameter: 8.375 in.

 

Limited Availability Deal of the Day: As of this posting, this is marked down to $99.99 as a MoreBeer Deal of the Day. Shipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

Things have tightened up in the keg market… a lot. Even in the past two days. Some of the deals we had have changed. Considering the deals going on as I post this, I think this is the best deal for a 5 gallon ball lock going on right now.  Also… IMO this is one of the better quality kegs on the market. See my review

Valid 9/9/23 only. Limit 1 per order, you may be able to place multiple orders to get in on this more than once. Limited quantities.

Corny Keg – 5 Gallon Ball Lock Keg KEG415

Learn More!  Hands on Review: Kegland Ball Lock Kegs!

keg deals

kegdeals

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

KegLand MKII Brewing Pump w/Stainless Steel Head! – Available Again for Pre-Order + SAVE 20%

KegLand MKII Magnetic Drive Pump | Inline Pump Head | Stainless Steel | 5 GPM | 25 Watt PMP504

KegLand MKII Magnetic Drive Pump | Inline Pump Head | Stainless Steel | 5 GPM | 25 Watt

From the product description, check product page for current description, price and availability:

  • Magnetic drive enables you to slow down the flow without damaging the pump—just add a ball valve to the outlet!
  • T.C. connection allows the pump head to be oriented at any angle in a full 360-degrees
  • Pull ring PRV at the pump outlet makes it easy to purge air and prime the pump before each use
  • Inline flow path for smooth integration into your brewery while keeping your tubing lines tidy
  • Stainless steel head with 1/2″ threaded ports to attach your preferred fittings—tri-clamp, quick disconnect, camlock, and More!

The best-selling MKII Magnetic Drive Pump now available with a major upgrade! This unit comes standard with an inline stainless steel pump head that installs on the pump body with a 3″ tri-clamp. Compared to the standard “center inlet” pump head, the “inline” flow path can make it much easier to integrate into your brewery and keep your brewing hoses tidy. At the outlet of the pump, there is a very handy pull ring PRV that allows you to bleed liquor or wort from the pump head to release trapped air and prime the pump. And with the 3″ T.C. connection, not only do you have a full 360-degrees to orient the pump head any which way, cleaning the pump after use could not be easier—just pop off the tri-clamp, wash out the pump head, and clamp back on.

Continue reading →

Ends Today: Kegland DuoTight BlowTie Spunding Valve… $11.99! + Hands on Review & Digital Upgrade

15 PSI Duotight Blowtie Spunding Valve with Gauge

DuoTight BlowTie Spunding Valve With Gauge

More Info

From the product description, check product page for current description, price and availability:

The BlowTie is a diaphragm based adjustable spunding valve used to release pressure from kegs and other pressure vessels. It features a usable range of 4 to 15 PSI, and the diaphragm construction means it has a wider pressure range than spring based spundling valves. This unit can be easily disassembled for cleaning using a phillips head screw driver. Accuracy of the gauge is plus or minus 2 PSI.

 

A Spunding Valve allows you to ferment under pressure, naturally and precisely carbonate in the keg, fix over-carbonated beers and lots more. See: Build a Spunding Valve – for loads of information on building and using a Spunding Valve.

For a limited time William’s Brewing has Cannular on sale for just $11.99 as part of their Year End Clearance!

DuoTight BlowTie Spunding Valve With Gauge – Year End Clearance!

Homebrew Finds is Spunding Central! Build a Spunding Valve! – How and Why << a top resource on the subject

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability

Upgrade to Digital:

Kegland has released a digital regulator option that works with their great inline regulator and gauge-equipped BlowTie Spunding Valves.

Hands on Review: Kegland Digital Gauges!

Continue reading →

Announcing: Kegland Wort Whipper Stir Plate

Wort Whipper Stir Plate

Kegland Wort Whipper Stir Plate via William’s Brewing

More Info

From the product description, check product page for current description, price and availability:

The compact Wort Whipper from KegLand is only 1.1″ thick, and 4.75″ wide. Although this unit says it can stir up to 5 liters, we have tested it and found it is only good for up to 2000ml of wort in a 3000ml Erlemeyer Flask. Still, it is an excellent value for $40.00.

This unit has variable speed, and it is best for yeast growth to set the speed as low as possible so the yeast is suspended without it looking like a tornado. A magnetic stir bar is included, although the pictured 3000ml Erlenmeyer Flask is not included.

 

KegLand Wort Whipper Stir Plate

More Fermentation Related!

 


This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. 1.6.24

Hands on Review: Kegland DuoTight Ball Lock QDs

Kegland’s DuoTight Fittings are designed to work with EVABarrier Double Wall Tubing.  They offer quick, reliable connections, easy implementation, a variety of fitting options and feature amazing versatility.  They’re also, generally speaking, very well priced.  DuoTights are push to connect fittings and require no tubing clamps.

DuoTights are… awesome.  Check out my extensive Hands on Review

When DuoTights first came out, the solution for connecting kegs to EVABarrier was using an MFL QD + DuoTight Flare fitting. That works just fine and is still the only option available to pin lock keg users.

Ball Lock keg users now have a native DuoTight option. Here’s a hands on look!

Check Current Price & Availability, Review Continues Below:

MoreBeer

William’s Brewing

Related: DuoTight Keg Faucet

Amazon

Keg Connection

Continue reading →

Last Call: 2½ Gallon KegLand Keg – on sale for $99.99

2½ Gallon NSF KegLand Keg

Kegland 2.5 Gallon Ball Lock Kegs

More Info

From the product description, check product page for current description, price and availability:

Our new NSF certified stainless steel 2½ gallon kegs from Keg King have two ball-lock male quick disconnect fittings that hold pressure even when not connected, allowing you to have several kegs aging while one is tapped. This keg is only 15″ tall. Rubber top and bottom make this keg extremely durable.

Smooth robotic interior welds conform to strict NSF standards. 8½” wide. Includes an exclusive interior lid hang tab for hanging hop infusers and dry hopping bags. Made in China.

 

These are great kegs!  Check out my Hands on Review

Why this size is great: These kegs are great for splitting batches, small batch brewers, doing one-off beers from split from a 5 gallon batch… or for easily serving on the go.  Purge with CO2, fill from your tap and place in ice in a 5 gallon bucket…. whammo! You can also use these in conjunction with an inline secondary as a CO2 source for portable serving.

2½ Gallon NSF KegLand Keg

Limited Time Deal…

  • For a limited time William’s Brewing is discounting select gear and supplies as part of a Year End Clearance!
  • These great kegs are included in the mix and on sale for $99.99.
  • Shipping is free or reasonably priced flat rate to addresses in the contiguous US depending on your order size for most items.

Hands on Review: Kegland 2.5 Gallon Ball Lock Kegs!

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.