Category Archives: Kettle Accessories

Stainless Steel Filter Basket Hop Spider, 10″ x 4″, 300 Micron

Hop Filter Strainer for Home Beer Brewing Kettle- 300 Micron Mesh Stainless Steel, Homebrew Hops Beer& Tea Kettle Brew Filter (3.94 x 10.04 in/ 5.91 x 13.78 in)(10 * 25.5cm)Stainless Steel Basket Beer Filter Basket.

More Info
Highlighted Features
  • ??HOMEMADE BREW??This filter is designed for homemade brew, which can hold hop to reduce impurities and enhance filtration level of fermentation broth, so as to ensure purer taste and aroma
  • ??CONVENIENCE??With hooks for hanging, very convenient to use
  • ??PREMIUM QUALITY??The filter is made of stainless steel, , resistant and easy to . Features and alkali resistant, anti and long lifespan
  • ??GOOD FILTRATION??300 micron stainless steel mesh ensures purer taste of the drinking. The filter can be used to contain hops when boiling wort, helping to reduce impurities and enhance filtration level of fermentation broth
  • ??WIDE APPLICATION??The filter is great for hop kegging equipment, can be used: Water Pumps, Water Filters,vacuum cleaners, washing machines, mounter, air conditioning, taps, straight drink etc.
Learn More

 

Hop Filter Strainer for Home Beer Brewing Kettle- 300 Micron Mesh Stainless Steel, Homebrew Hops Beer& Tea Kettle Brew Filter (3.94 x 10.04 in/ 5.91 x 13.78 in)(10 * 25.5cm) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Hop Spider 300...image
Hop Spider 300 Micron Mesh Stainless Steel Hop Filter Strainer for Home Beer Brewing Kettle
$26.99
YaeBrew 6 X...image
YaeBrew 6 X 14 Inch Hop Spider 300 Micron Mesh Stainless Steel Hop Filter Strainer Hopper for Home Brewing Beer Tea Kettle (6"X14")
Brewing 6x14in Hopper...image
Brewing 6x14in Hopper Spider Strainer – Stainless Steel 300 Micron Mesh Homebrew Hops Beer & Tea Kettle Brew Filter
$32.49
Hop Hopper Spider...image
Hop Hopper Spider Strainer Basket Filter for Homebrew Hops Beer & Tea Brewing Bucket Fermenter Kettle, 304 Stainless Steel 300 Micron Mesh - 4" x 10"
$21.99

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

1/2″ Stainless Stainless Weldless Bulkhead and Ball Valve by DERNORD – add a ball valve to your kettle or mash tun – $15.99, near best price

DERNORD 1/2 Inch Stainless Stee Ball Valve Weldless Bulkhead For Home Brew Kettle (1/2 NPT to 1/2 Barb Hose)

DERNORD 1/2 Inch Stainless Stee Ball Valve Weldless Bulkhead For Home Brew Kettle (1/2 NPT to 1/2 Barb Hose)

More Info


Highlighted Features
  • 1/2 Inch Stainless Steel 2 piece Full Port Ball Valve
  • 1/2 Inch Stainless Steel Hose Barb
  • 1/2 Inch weldless bulkhead fitting fits 7/8 Inch kettle hole
  • WOG1000 working pressure rating (1000psi) to withstand high pressure and extreme temperatures
  • Rigorous testing standards prove minimal corrosion and rust along with easy cleaning
Learn More

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

Use to add a ball valve to your compatible kettle, mash tun or HLT.

7/6 6 PM Central: This is selling for just $15.99. That’s $1 shy of the best historical third party Amazon price I found, notwithstanding Lightning Deals or coupons. Shipping is also free to many US addresses with Prime Membership [Try Prime for Free] or a qualifying order. Prices and availability can change quickly.  Check product page for current info – More About Prices

DERNORD 1/2 Inch Stainless Steel Ball Valve Weldless Bulkhead For Home Brew Kettle (1/2 NPT to 1/2 Barb Hose) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

OxiClean Free Versatile...image
OxiClean Free Versatile Stain Remover Powder, 3 lb
$8.29 ($0.13 / load)
Vacuum Sealer Machine...image
Vacuum Sealer Machine with 55 Count 8"x12" Food Sealers Bags and 8"*79' Vacuum Sealer Roll, Inkbird Automatic Vacuum Sealers Machine with Built-in Cutter, Dry & Moist Sealing Modes for Food Storage
$65.99
Gamma2 Vittles Vault...image
Gamma2 Vittles Vault Airtight Dog Food Storage Container - Fits up to 35 Pounds of Dry Pet Food - Perfect for Cat and Puppy Kibble - BPA-Free Plastic - Made in the USA - 12" L x 16.75" H
$32.45
FLOTit 2.0 -...image
FLOTit 2.0 - No Beer Left Behind Floating Dip Tube with Double Filter Inlet (DFI) of 500/300 micron for always clear beer, less beer waste and no clogging. Made in USA.
$29.00
Meat Thermometer Digital...image
Meat Thermometer Digital for Grilling and Cooking - ANDAXIN Waterproof Ultra-Fast Instant Read Food thermometers with Backlight & Calibration for Kitchen, Deep Fry, BBQ, Grill(Red/Black), LCD
$8.98
VEVOR Magnetic Stirrer,...image
VEVOR Magnetic Stirrer, 0-2000 RPM Stir Plate with Adjustable Speed Knob, 3000mL Plate Stirrer Kit, Stir Bar Included
$16.84

adamztop5

Stainless Steel 1.5″ TC Weldless Bulkhead, Add TC to Your Gear

Worldwhere 1.5" Tri Clamp Bulkhead Compression Fittings,Stainless Steel 304 Homebrew Kettle Weldless Bulkhead

Worldwhere 1.5″ Tri Clamp Bulkhead Compression Fittings,Stainless Steel 304 Homebrew Kettle Weldless Bulkhead

More Info

Highlighted Features
  • Size: Used to connect 1.5"TC(50.5mm)
  • Material: The bulkhead fitting is made of high quality stainless steel ,high strength and corrosion resistance
  • Installation: Just drill a 41mm hole in the kettle
  • Large washer: Two larged and thickened silicone washers provide a more stable seal
  • Widely used:Suitable for coke kegs, soda kegs, beer kegs, kettles, etc.
Learn More

 

Worldwhere 1.5″ Tri Clamp Bulkhead Compression Fittings,Stainless Steel 304 Homebrew Kettle Weldless Bulkhead– affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

More Tri-Clover/Tri-Clamp!  Tri-Clamp Fittings at Proflow Dynamics

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Hands on Review: Brewers Hardware Quick Clean Take-Apart Ball Valves + Limited Time DEAL on PFD Take-Apart Ball Valves

This review is by Homebrew Finds Contributor Brad Probert.  Brad is an engineer, expert homebrewer and experienced reviewer.  Grab a link to Brad’s website at the end of this review.

Brewers Hardware Take-Apart Ball Valve

Up until now, I’ve known of two types of ball valves- 2-piece and 3-piece. The key difference between them being that the 3-piece can be disassembled for full cleaning. When I first started buying gear, I figured I’d go for the 3-piece because the idea of being able to take it apart and clean it sounded like something I should probably do. After seeing the complications of needing to use 2 wrenches at a time, while holding the body of the valve stable, I quickly concluded my 3-piece valves would never experience the joy of a ‘deep cleaning’.

Continue reading →

1/2″ NPT 304 Stainless Steel Full Port Ball Valve

Wantmatch 1/2" NPT ball valve,304 Stainless Steel full port ball valve for Water, Oil, and Gas

1/2″ NPT ball valve,304 Stainless Steel full port ball valve

More Info


Highlighted Features
  • Stainless steel material is corrosion resistant
  • Working pressure 1000PSI, can be used in liquid and gas
  • Full port design, low pressure drop
  • Working temperature of -60°F to 450°F
  • Repairable valve, Can be taken apart via threads, Female NPT Ports
Learn More

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

Wantmatch 1/2″ NPT ball valve,304 Stainless Steel full port ball valve for Water, Oil, and Gas– affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Ends Soon: Stainless Steel Quick Disconnect Sale at MoreBeer

homebrewing quick disconnect sale

MoreBeer is discounting entire lineup of stainless steel quick disconnects by 15% when you use promo code SSQD15.  Save time on brew day by outfitting your kettles, mash tuns, pumps and tubing with QDs.  I use male connections of kettles, mash tuns and pumps and female connections on all tubing.  You could also do the opposite.  As long as you’re consistent it should work well.

Stainless Steel Quick Disconnect Sale at MoreBeer – remember to use promo code SSQD15

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

Stainless Steel Filter Basket Hop Spider, 10″ x 4″, 300 Micron

Hop Filter Strainer for Home Beer Brewing Kettle- 300 Micron Mesh Stainless Steel, Homebrew Hops Beer& Tea Kettle Brew Filter (3.94 x 10.04 in/ 5.91 x 13.78 in)(10 * 25.5cm)Stainless Steel Basket Beer Filter Basket.

More Info


Highlighted Features
  • ??HOMEMADE BREW??This filter is designed for homemade brew, which can hold hop to reduce impurities and enhance filtration level of fermentation broth, so as to ensure purer taste and aroma
  • ??CONVENIENCE??With hooks for hanging, very convenient to use
  • ??PREMIUM QUALITY??The filter is made of stainless steel, , resistant and easy to . Features and alkali resistant, anti and long lifespan
  • ??GOOD FILTRATION??300 micron stainless steel mesh ensures purer taste of the drinking. The filter can be used to contain hops when boiling wort, helping to reduce impurities and enhance filtration level of fermentation broth
  • ??WIDE APPLICATION??The filter is great for hop kegging equipment, can be used: Water Pumps, Water Filters,vacuum cleaners, washing machines, mounter, air conditioning, taps, straight drink etc.
Learn More

 

Hop Filter Strainer for Home Beer Brewing Kettle- 300 Micron Mesh Stainless Steel, Homebrew Hops Beer& Tea Kettle Brew Filter (3.94 x 10.04 in/ 5.91 x 13.78 in)(10 * 25.5cm) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Hop Spider 300...image
Hop Spider 300 Micron Mesh Stainless Steel Hop Filter Strainer for Home Beer Brewing Kettle
$26.99
YaeBrew 6 X...image
YaeBrew 6 X 14 Inch Hop Spider 300 Micron Mesh Stainless Steel Hop Filter Strainer Hopper for Home Brewing Beer Tea Kettle (6"X14")
Brewing 6x14in Hopper...image
Brewing 6x14in Hopper Spider Strainer – Stainless Steel 300 Micron Mesh Homebrew Hops Beer & Tea Kettle Brew Filter
$32.49
Hop Hopper Spider...image
Hop Hopper Spider Strainer Basket Filter for Homebrew Hops Beer & Tea Brewing Bucket Fermenter Kettle, 304 Stainless Steel 300 Micron Mesh - 4" x 10"
$21.99


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

1/2″ NPT Stainless Steel Full Port Ball Valve

1/2'' Ball Valve NPT Full Bore Stainless Steel Full Port Ball Valve 2 Lever Rotary Ball Valve with a Handle

1/2” Ball Valve NPT Full Bore Stainless Steel Full Port Ball Valve 2 Lever Rotary Ball Valve with a Handle

More Info


Highlighted Features
  • ☆ Quick Installation: 1/2 inch ball valve requires no special tools, no soldering, no crimping or glue. Ball valve in the pipeline is mainly used to do cutting, distribution and change the direction of of media
  • ☆ Excellent Resistance: This ball valve 1/2 is made of premium stainless steel material, sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage
  • ☆ Easy To Rotate: The full port ball valve is easy to operate and easily rotated after installation, making it easier to reach the shutoff, or to work in tight spaces. Quick and easy to install a new valve or to fix a leaking water pipe
  • ☆ Seal Tightly: These 1/2 stainless steel ball valves are fitted with tight seals to ensure no leakage and a long lasting seal after many years of frequent usage. The full port ball valve allows fluid to pass through the valve easily and freely
  • ☆ What You Will Get: We stand behind all of our them with a product guarantee and promise to give you the best in customer care! Material: stainless steel 304; Dimension: 1/2''; Connection: inch thread; Temp Range:-60°F to 450°F
Learn More

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

1/2” Ball Valve NPT Full Bore Stainless Steel Full Port Ball Valve 2 Lever Rotary Ball Valve with a Handle – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

DERNORD Stainless Steel Mini Ball Valve

DERNORD Stainless Steel Mini Ball Valve NPT Thread (1/2" Female&Male)

DERNORD Stainless Steel Mini Ball Valve NPT Thread (1/2″ Female&Male)

More Info


Highlighted Features
  • 1/2" NPT Female&Male threads for connecting to male threaded pipe fittings
  • SUS304 body and ball for extra strength and corrosion resistance
  • Inline valve for connecting two pipes going in the same direction with Double-seal system
  • Heavy duty stainless handles to increase service life, fast 1/4 turn open or closed operation
  • Standard port flow for smaller valve size, each valve individually tested for maximum safety about Water, Oil, and Gas(no freezing)
Learn More

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

DERNORD Stainless Steel Mini Ball Valve NPT Thread (1/2″ Female&Male) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

DERNORD Stainless Steel Mini Ball Valve

DERNORD Stainless Steel Mini Ball Valve NPT Thread (1/2" Female&Male)

DERNORD Stainless Steel Mini Ball Valve NPT Thread (1/2″ Female&Male)

More Info


Highlighted Features
  • 1/2" NPT Female&Male threads for connecting to male threaded pipe fittings
  • SUS304 body and ball for extra strength and corrosion resistance
  • Inline valve for connecting two pipes going in the same direction with Double-seal system
  • Heavy duty stainless handles to increase service life, fast 1/4 turn open or closed operation
  • Standard port flow for smaller valve size, each valve individually tested for maximum safety about Water, Oil, and Gas(no freezing)
Learn More

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

DERNORD Stainless Steel Mini Ball Valve NPT Thread (1/2″ Female&Male) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Hands on Review Blichmann 1/2″ Linear Flow Valve – Install in any kettle

Hands on Review: Blichmann Engineering Linear Flow Valve

Blichmann Engineering’s Linear Flow Valve was first introduced as part of their BoilerMaker G2 Kettle.  It is a ball lock valve replacement.  Since that kettle was released the Liner Flow Valve has been released as a separate product.

Check Prices and Availability, Review Continues Below

Adventures in Homebrewing

Great Fermentations

Continue reading →

DERNORD Stainless Steel Mini Ball Valve

DERNORD Stainless Steel Mini Ball Valve NPT Thread (1/2" Female&Male)

DERNORD Stainless Steel Mini Ball Valve NPT Thread (1/2″ Female&Male)

More Info


Highlighted Features
  • 1/2" NPT Female&Male threads for connecting to male threaded pipe fittings
  • SUS304 body and ball for extra strength and corrosion resistance
  • Inline valve for connecting two pipes going in the same direction with Double-seal system
  • Heavy duty stainless handles to increase service life, fast 1/4 turn open or closed operation
  • Standard port flow for smaller valve size, each valve individually tested for maximum safety about Water, Oil, and Gas(no freezing)
Learn More

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

DERNORD Stainless Steel Mini Ball Valve NPT Thread (1/2″ Female&Male) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

TWO x Stainless Steel 1.5″ TC Weldless Bulkhead, Add TC to Your Gear

(2 pack)Hilangsan 1.5" Tri Clamp Weldless Bulkhead Stainless Steel Compression Bulkhead Fittings Homebrew Kettle Bulkhead 1.5 inch TC Bulkhead for Brew Kettle

Two 1.5” TC homebrew Weldless Bulkhead

More Info


Highlighted Features
  • 【304 Stainless Steel】The 1.5 inch bulkhead fitting is made of 304 stainless steel, anti-rust, high-temperature resistance, high-pressure resistance. The Polishing treatment makes the surface look more refined.
  • 【Welding-Free Design】Only need to drill a 41 mm hole in the kettle, then the 1.5〃TC bulkhead can be installed on the most brew kettle without welding. Add a TC port to your brew kettle easily.
  • 【Food Grade O-Ring】A high-temperature resistant silicone O-ring is included. The O-ring has the perfect thickness and density to properly seal on the curved face of a brew kettle without leaking.
  • 【Applicable Size】This bulkhead compression fitting is suitable for 1.5 inch tri clamp. It is suitable for coke kegs, soda kegs, beer kegs, kettles, etc. as small as 12 inches in diameter.
  • 【Quality Service】We are committed to providing you with high-quality and reliable products. If you have any questions, you can tell us at any time. We will definitely solve it for you!
Learn More

 

(2 pack)Hilangsan 1.5″ Tri Clamp Weldless Bulkhead Stainless Steel Compression Bulkhead Fittings Homebrew Kettle Bulkhead 1.5 inch TC Bulkhead for Brew Kettle – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

More Tri-Clover/Tri-Clamp!  Tri-Clamp Fittings at Proflow Dynamics


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Stainless Steel 1.5″ TC Weldless Bulkhead, Add TC to Your Gear + How-to: Add A Tri-Clamp To Your Homebrew Keg

1.5” TC homebrew Weldless Bulkhead

More Info



 

homebrew Sanitary Weldless Bulkehad,1.5″ TC Bulkhead Compression Fitting,1.5″Triclamp for Homebrew Kettle Bulkhead – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

More Tri-Clover/Tri-Clamp!  Tri-Clamp Fittings at Proflow Dynamics


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

TWO x Stainless Steel 1.5″ TC Weldless Bulkhead, Add TC to Your Gear

(2 pack)Hilangsan 1.5" Tri Clamp Weldless Bulkhead Stainless Steel Compression Bulkhead Fittings Homebrew Kettle Bulkhead 1.5 inch TC Bulkhead for Brew Kettle

Two 1.5” TC homebrew Weldless Bulkhead

More Info


Highlighted Features
  • 【304 Stainless Steel】The 1.5 inch bulkhead fitting is made of 304 stainless steel, anti-rust, high-temperature resistance, high-pressure resistance. The Polishing treatment makes the surface look more refined.
  • 【Welding-Free Design】Only need to drill a 41 mm hole in the kettle, then the 1.5〃TC bulkhead can be installed on the most brew kettle without welding. Add a TC port to your brew kettle easily.
  • 【Food Grade O-Ring】A high-temperature resistant silicone O-ring is included. The O-ring has the perfect thickness and density to properly seal on the curved face of a brew kettle without leaking.
  • 【Applicable Size】This bulkhead compression fitting is suitable for 1.5 inch tri clamp. It is suitable for coke kegs, soda kegs, beer kegs, kettles, etc. as small as 12 inches in diameter.
  • 【Quality Service】We are committed to providing you with high-quality and reliable products. If you have any questions, you can tell us at any time. We will definitely solve it for you!
Learn More

 

(2 pack)Hilangsan 1.5″ Tri Clamp Weldless Bulkhead Stainless Steel Compression Bulkhead Fittings Homebrew Kettle Bulkhead 1.5 inch TC Bulkhead for Brew Kettle – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

More Tri-Clover/Tri-Clamp!  Tri-Clamp Fittings at Proflow Dynamics


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

15%+10% Off ProFlow Dynamics Homebrew Gear

Proflow Dynamics has an extensive selection of homebrew gear, fittings and disconnects anchored by their lineup of Stainless Steel Camlock QDs.

More About ProFlow Dynamics

 

Stacking Deals!

  • Generally Great Prices: ProFlow already has generally great prices.  Some of the best everyday prices for fittings, QDs, ball locks & more
  • 15% Off Coupon: BREW15% takes an additional 15% off their lineup of homebrewing gear.
  • Another 10% Off: Using any link in this post will save you another 10%!

ProFlow’s Homebrew Lineup << Use this link for 10% off + promo code BREW15% for another 15%

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. pst:pfdsale

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

TWO x Stainless Steel 1.5″ TC Weldless Bulkhead, Add TC to Your Gear

(2 pack)Hilangsan 1.5" Tri Clamp Weldless Bulkhead Stainless Steel Compression Bulkhead Fittings Homebrew Kettle Bulkhead 1.5 inch TC Bulkhead for Brew Kettle

Two 1.5” TC homebrew Weldless Bulkhead

More Info


Highlighted Features
  • 【304 Stainless Steel】The 1.5 inch bulkhead fitting is made of 304 stainless steel, anti-rust, high-temperature resistance, high-pressure resistance. The Polishing treatment makes the surface look more refined.
  • 【Welding-Free Design】Only need to drill a 41 mm hole in the kettle, then the 1.5〃TC bulkhead can be installed on the most brew kettle without welding. Add a TC port to your brew kettle easily.
  • 【Food Grade O-Ring】A high-temperature resistant silicone O-ring is included. The O-ring has the perfect thickness and density to properly seal on the curved face of a brew kettle without leaking.
  • 【Applicable Size】This bulkhead compression fitting is suitable for 1.5 inch tri clamp. It is suitable for coke kegs, soda kegs, beer kegs, kettles, etc. as small as 12 inches in diameter.
  • 【Quality Service】We are committed to providing you with high-quality and reliable products. If you have any questions, you can tell us at any time. We will definitely solve it for you!
Learn More

 

(2 pack)Hilangsan 1.5″ Tri Clamp Weldless Bulkhead Stainless Steel Compression Bulkhead Fittings Homebrew Kettle Bulkhead 1.5 inch TC Bulkhead for Brew Kettle – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

More Tri-Clover/Tri-Clamp!  Tri-Clamp Fittings at Proflow Dynamics


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Stainless Steel Cam Lock QDs at Proflow Dynamics – 15%+10% Off w/Stacking Deals

homebrew cam lock

Proflow Dynamics has an extensive selection of homebrew gear, fittings and disconnects anchored by their lineup of Stainless Steel Camlock QDs.

More About ProFlow Dynamics

 

Camlock QDs at PFD!  I’ve used ProFlow Dynamics Quick Disconnects on my kettles, mash tun, pumps and tubing for a longtime.  They have worked great for me.  I put male connectors kettles, mash tuns and pumps and use female connectors for tubing.  Standardizing on this (or the opposite) means you can use tubing as jumpers and always have the availability to connect your gear.

These are made from Stainless Steel and are available in lots of configurations.  Those are classified by Type and Size.  Type may mean something in “commercial cam lock fitting circles”, but I was initially confused by this.  Types are akin to model numbers.  For example, Type A is Female NPT to Male Cam and Groove.

  • Generally Great Prices: ProFlow already has generally great prices.  Some of the best everyday prices for fittings, QDs, ball locks & more
  • 15% Off Coupon: BREW15% takes an additional 15% off their lineup of homebrewing gear.
  • Another 10% Off: Using any link in this post will save you another 10%!

Camlock QDs at PFD | ProFlow’s Homebrew Lineup – remember coupon code BREW15% + any link in this post for ANOTHER 10% off


pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. pst:pfdcam

Hands on Review: Blichmann Engineering BrewVision Thermometer!

blichmann engineering brewvision review

This review is by Homebrew Finds Contributor Brad Probert.  Brad is an engineer, expert homebrewer and experienced reviewer.  Grab a link to Brad’s website at the end of this review.

Blichmann BrewVision Thermometer

There is a wide array of homebrew gear out there. Most anything you buy has options or comes in various designs. Specific to this review, there are tons of different thermometers. But one of Blichmann’s offerings sets itself apart by coupling some very useful software with its digital thermometer. The BrewVision has been on the market for 5-6 years, but just recently they lowered the price substantially, making it even lower than their analog dial-gauge thermometer.

The BrewVision comes in two configurations based on the length of the temperature probe you need in your particular setup. It has a standard ½” NPT thread to screw into a female NPT fitting, paired with their weldless bulkhead fitting, or coupled with their TC mounting flange. The package contains the probe and the threaded installation collar, and a large sealed transmitter housing that contains 2x AAA batteries, the on/off button, and the Bluetooth transmitting hardware.

The power of the BrewVision lies in the software interface you install on your phone. It doesn’t require the latest smartphone (compatible with even the 2010 iPhone 4, or any Android phones) to run their software. You can run the software with whatever level of sophistication you want. At its simplest, your phone functions as the pressure readout gauge. There is no display on the body of the BrewVision itself, so it requires you to have your Bluetooth smartphone paired and running the Blichmann app. While this might seem like a hassle to some, the benefit is you no longer have to be right next to your thermometer to know the temperature, you just have to be in Bluetooth range. Stay in your comfy chair relaxing while your strike water heats, or dodge the winter weather during your mash while you sit inside with the heat on.

Compare Models, Prices and Availability, Review Continues Below:

Related:

Continue reading →

Stainless Steel QDs at Proflow Dynamics – 15%+10% Off w/Stacking Deals

homebrew quick disconnect deal

Proflow Dynamics has an extensive selection of homebrew gear, fittings and disconnects anchored by their lineup of Stainless Steel Camlock QDs.

More About ProFlow Dynamics

 

  • Generally Great Prices: ProFlow already has generally great prices.  Some of the best everyday prices for fittings, QDs, ball locks & more
  • 15% Off Coupon: BREW15% takes an additional 15% off their lineup of homebrewing gear.
  • Another 10% Off: Using any link in this post will save you another 10%!

Stainless Steel Quick Disconnects at PFD | ProFlow’s Homebrew Lineup – remember coupon code BREW15% + any link in this post for ANOTHER 10% off


pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. pst:pfdcam