Category Archives: Kettle Accessories

Stainless Steel Cam Lock QDs at Proflow Dynamics – 15%+10% Off w/Stacking Deals

homebrew cam lock

Proflow Dynamics has an extensive selection of homebrew gear, fittings and disconnects anchored by their lineup of Stainless Steel Camlock QDs.

More About ProFlow Dynamics

 

Camlock QDs at PFD!  I’ve used ProFlow Dynamics Quick Disconnects on my kettles, mash tun, pumps and tubing for a longtime.  They have worked great for me.  I put male connectors kettles, mash tuns and pumps and use female connectors for tubing.  Standardizing on this (or the opposite) means you can use tubing as jumpers and always have the availability to connect your gear.

These are made from Stainless Steel and are available in lots of configurations.  Those are classified by Type and Size.  Type may mean something in “commercial cam lock fitting circles”, but I was initially confused by this.  Types are akin to model numbers.  For example, Type A is Female NPT to Male Cam and Groove.

  • Generally Great Prices: ProFlow already has generally great prices.  Some of the best everyday prices for fittings, QDs, ball locks & more
  • 15% Off Coupon: BREW15% takes an additional 15% off their lineup of homebrewing gear.
  • Another 10% Off: Using any link in this post will save you another 10%!

Camlock QDs at PFD | ProFlow’s Homebrew Lineup – remember coupon code BREW15% + any link in this post for ANOTHER 10% off

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. pst:pfdcam

Hands on Review: Blichmann Engineering BrewVision Thermometer!

blichmann engineering brewvision review

This review is by Homebrew Finds Contributor Brad Probert.  Brad is an engineer, expert homebrewer and experienced reviewer.  Grab a link to Brad’s website at the end of this review.

Blichmann BrewVision Thermometer

There is a wide array of homebrew gear out there. Most anything you buy has options or comes in various designs. Specific to this review, there are tons of different thermometers. But one of Blichmann’s offerings sets itself apart by coupling some very useful software with its digital thermometer. The BrewVision has been on the market for 5-6 years, but just recently they lowered the price substantially, making it even lower than their analog dial-gauge thermometer.

The BrewVision comes in two configurations based on the length of the temperature probe you need in your particular setup. It has a standard ½” NPT thread to screw into a female NPT fitting, paired with their weldless bulkhead fitting, or coupled with their TC mounting flange. The package contains the probe and the threaded installation collar, and a large sealed transmitter housing that contains 2x AAA batteries, the on/off button, and the Bluetooth transmitting hardware.

The power of the BrewVision lies in the software interface you install on your phone. It doesn’t require the latest smartphone (compatible with even the 2010 iPhone 4, or any Android phones) to run their software. You can run the software with whatever level of sophistication you want. At its simplest, your phone functions as the pressure readout gauge. There is no display on the body of the BrewVision itself, so it requires you to have your Bluetooth smartphone paired and running the Blichmann app. While this might seem like a hassle to some, the benefit is you no longer have to be right next to your thermometer to know the temperature, you just have to be in Bluetooth range. Stay in your comfy chair relaxing while your strike water heats, or dodge the winter weather during your mash while you sit inside with the heat on.

Compare Models, Prices and Availability, Review Continues Below:

Related:

Continue reading →

Stainless Steel QDs at Proflow Dynamics – 15%+10% Off w/Stacking Deals

homebrew quick disconnect deal

Proflow Dynamics has an extensive selection of homebrew gear, fittings and disconnects anchored by their lineup of Stainless Steel Camlock QDs.

More About ProFlow Dynamics

 

  • Generally Great Prices: ProFlow already has generally great prices.  Some of the best everyday prices for fittings, QDs, ball locks & more
  • 15% Off Coupon: BREW15% takes an additional 15% off their lineup of homebrewing gear.
  • Another 10% Off: Using any link in this post will save you another 10%!

Stainless Steel Quick Disconnects at PFD | ProFlow’s Homebrew Lineup – remember coupon code BREW15% + any link in this post for ANOTHER 10% off


pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. pst:pfdcam

Weldless Stainless Steel Thermometer – add a thermometer to your kettle – from MoreBeer – $27.99 + Free Ship Eligible, Limited Availability

Weldless Thermometer (Stainless) - 2 in. WL313

More Info

From the product description, check product page for current description, price and availability:

If you want to be able to read the temperature of your brew without lifting a lid, this is the answer! With the new Fermentap Weldless Thermometer, you can upgrade any existing kettle or keg to read temperature from the outside! Gone are the days of opening kettle lids to check wort or mash temperatures!

The Fermentap Weldless Thermometer has a 2 inch probe, making it ideal for use in your Hot Liquor Tank or Boil Kettle. The 2 inch stem is much shorter than our 6 inch version, making this product a better suite for vessels with immersion heat exchangers. This Weldless Thermometer will work in Kettles & Kegs! The thermometer is our Fermentap Dial Thermometer, and features a hermetically sealed face, all stainless construction, and a fast response to temperature change!

Features:

  • Thermometer with 2″ Probe and 3″ Dial Face.
  • 2″ probe is short enough to stay out of the way of Immersion Chillers or heat exchangers.
  • All Stainless Construction.
  • High Temperature Food Grade Silicone Gasket.
  • Will work great with Kettles & Kegs!
  • Requires a 1″ hole to be drilled in the vessel for installation.
  • Replaces our WL113.

 

Limited Availability Deal of the Day: As of this posting, this is marked down to $27.99 as a MoreBeer Deal of the Day. Shipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

Weldless Thermometer (Stainless) – 2 in. WL313

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Stainless Steel 1.5″ TC Weldless Bulkhead, Add TC to Your Gear + How-to: Add A Tri-Clamp To Your Homebrew Keg

1.5” TC homebrew Weldless Bulkhead

More Info



 

homebrew Sanitary Weldless Bulkehad,1.5″ TC Bulkhead Compression Fitting,1.5″Triclamp for Homebrew Kettle Bulkhead – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

More Tri-Clover/Tri-Clamp!  Tri-Clamp Fittings at Proflow Dynamics


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Stainless Steel Tri-Clamp Thermometer! – $49.99, Save $10 + Free Ship Eligible, Limited Availability

1.5 in. T.C. Thermometer - 3.25 in. Face x 7.5 in. Probe H594Stainless Steel Tri-Clamp Thermometer from MoreBeer

More Info

From the product description, check product page for current description, price and availability:

Stainless steel dial thermometer with 1.5″ tri-clamp fitting. Thermometer face measures 3.25″ and measures from 32-220°F (0-100°C). Probe measures 7.5″ in length from the tip to the T.C. fitting.

 

Limited Availability Deal of the Day: As of this posting, this is marked down to $49.99 as a MoreBeer Deal of the Day. Shipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

1.5 in. T.C. Thermometer – 3.25 in. Face x 7.5 in. Probe H594

More Tri-Clover/Tri-Clamp!  Tri-Clamp Fittings at Proflow Dynamics


pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

10″ x 4″ Stainless Steel Kettle Hop Spider by G Francis

Brewing 4x10in Hopper Spider Strainer – Stainless Steel 300 Micron Mesh Homebrew Hops Beer & Tea Kettle Brew Filter

Brewing 4x10in Hopper Spider Strainer – Stainless Steel 300 Micron Mesh Homebrew Hops Beer & Tea Kettle Brew Filter

More Info

From the product description, check product page for current description, price and availability:

  • FILTER BEER, COFFEE, TEA: We love beer, but what is better than the beverage itself is the satisfaction of creating it; The G. Francis Brewing 4”x10” Inch Hopper Spider Strainer is designed for kettle brewing systems to contain hops while keeping debris out of pumps, chillers, and finished beer, resulting in a clearer beer and better taste; Suitable for brewing beer, filtering coffee, making compost tea, and putting into a boil pot
  • EASY TO USE: Two hook handles firmly secure this filter over the edge of your kettle and, during the boil, hops can be poured directly into the spider; For any standard electric brewing system
  • BUILT TO LAST: 300-micron mesh that will not wrinkle or damage easily; Frame made from firm stainless steel for strength and longevity; Will resist rust, corrosion, heat, and pressure; Enables easier sterilization prior to brewing and easy cleanup
  • EASY STORAGE: 2 kettle hanging hooks on top end of basket offers stability, user-friendliness, and versatility; Easier than beer cloth hops bags to remove, clean, and sanitize; Care of this hops spider is easy – you can put in the dishwasher as a separate load with no soap, or simply use a garden hose to wash it out; A no-rinse cleaner and sponge after you rinse it off also works
  • FILTER MORE: Filter has a 10-inch height and 4-inch diameter (25.4cm x 10.2cm); Suitable for hop pellet capacity of approximately 6 ounces (170g)

 

Brewing 4x10in Hopper Spider Strainer – Stainless Steel 300 Micron Mesh Homebrew Hops Beer & Tea Kettle Brew Filter – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Weldless Sight Glasses – from $10.14

weldless sight glass homebrew

Proflow Dynamics has an extensive selection of homebrew gear, fittings and disconnects anchored by their lineup of Stainless Steel Camlock QDs.

More About ProFlow Dynamics

 

15% Off Sight Glasses> PFD already has generally great prices.  As of this posting, promo code BREW15% takes an additional 15% off sight glasses.

Stacks With> Using the link below takes another 10% off!  These two stacking deals mean that weldless sight glasses start out at just $10.14 (11″ Economy). Price, promotions and availability can change quickly.  Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this post was published; however, they may differ from those you see when you visit the product page.  Check the product page for current price, description and availability

Weldless Sight Glasses – use coupon code BREW15% | ProFlow’s Homebrew Lineup

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

pst:pfdsight

Stainless Steel 1.5″ TC Weldless Bulkhead, Add TC to Your Gear + How-to: Add A Tri-Clamp To Your Homebrew Keg

1.5” TC homebrew Weldless Bulkhead

More Info



 

homebrew Sanitary Weldless Bulkehad,1.5″ TC Bulkhead Compression Fitting,1.5″Triclamp for Homebrew Kettle Bulkhead – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

More Tri-Clover/Tri-Clamp!  Tri-Clamp Fittings at Proflow Dynamics


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Stainless Steel Cam Lock QDs at Proflow Dynamics – 15%+10% Off w/Stacking Deals

homebrew cam lock

Proflow Dynamics has an extensive selection of homebrew gear, fittings and disconnects anchored by their lineup of Stainless Steel Camlock QDs.

More About ProFlow Dynamics

 

Camlock QDs at PFD!  I’ve used ProFlow Dynamics Quick Disconnects on my kettles, mash tun, pumps and tubing for a longtime.  They have worked great for me.  I put male connectors kettles, mash tuns and pumps and use female connectors for tubing.  Standardizing on this (or the opposite) means you can use tubing as jumpers and always have the availability to connect your gear.

These are made from Stainless Steel and are available in lots of configurations.  Those are classified by Type and Size.  Type may mean something in “commercial cam lock fitting circles”, but I was initially confused by this.  Types are akin to model numbers.  For example, Type A is Female NPT to Male Cam and Groove.

  • Generally Great Prices: ProFlow already has generally great prices.  Some of the best everyday prices for fittings, QDs, ball locks & more
  • 15% Off Coupon: BREW15% takes an additional 15% off their lineup of homebrewing gear.
  • Another 10% Off: Using any link in this post will save you another 10%!

Camlock QDs at PFD | ProFlow’s Homebrew Lineup – remember coupon code BREW15% + any link in this post for ANOTHER 10% off


pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. pst:pfdcam

Convert Garden Hose Thread GHT to Stainless Steel Camlock! & Stacking Discounts

Camlock By Garden Hose Thread

Camlock QDs at PFD!  I’ve used ProFlow Dynamics Quick Disconnects on my kettles, mash tun, pumps and tubing for a longtime.  They have worked great for me.  I put male connectors kettles, mash tuns and pumps and use female connectors for tubing.  Standardizing on this (or the opposite) means you can use tubing as jumpers and always have the availability to connect your gear.

These are made from Stainless Steel and are available in lots of configurations.  Those are classified by Type and Size.  Type may mean something in “commercial cam lock fitting circles”, but I was initially confused by this.  Types are akin to model numbers.  For example, Type A is Female NPT to Male Cam and Groove.

  • Generally Great Prices: ProFlow already has generally great prices.  Some of the best everyday prices for fittings, QDs, ball locks & more
  • 15% Off Coupon: BREW15% takes an additional 15% off their lineup of homebrewing gear.
  • Another 10% Off: Using any link in this post will save you another 10%!

If you’ve standardized on Camlock Disconnects and are looking to simplify brew day, ProFlow Dynamics has a fitting that converts Garden Hose Threads (GHT) to Camlock.

Camlock By Garden Hose Thread

Camlock QDs at PFD | ProFlow’s Homebrew Lineup – remember coupon code BREW15% + any link in this post for ANOTHER 10% off

Camlock Hands on Review!


Proflow Dynamics has an extensive selection of homebrew gear, fittings and disconnects anchored by their lineup of Stainless Steel Camlock QDs.

More About ProFlow Dynamics

 


pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. pst:pfdght

15%+10% Off ProFlow Dynamics Homebrew Gear

Proflow Dynamics has an extensive selection of homebrew gear, fittings and disconnects anchored by their lineup of Stainless Steel Camlock QDs.

More About ProFlow Dynamics

 

Stacking Deals!

  • Generally Great Prices: ProFlow already has generally great prices.  Some of the best everyday prices for fittings, QDs, ball locks & more
  • 15% Off Coupon: BREW15% takes an additional 15% off their lineup of homebrewing gear.
  • Another 10% Off: Using any link in this post will save you another 10%!

ProFlow’s Homebrew Lineup << Use this link for 10% off + promo code BREW15% for another 15%

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. pst:pfdsale

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Weldless Stainless Steel Thermometer – add a thermometer to your kettle – from MoreBeer – $27.99 + Free Ship Eligible, Limited Availability

Weldless Thermometer (Stainless) - 2 in. WL313

More Info

From the product description, check product page for current description, price and availability:

If you want to be able to read the temperature of your brew without lifting a lid, this is the answer! With the new Fermentap Weldless Thermometer, you can upgrade any existing kettle or keg to read temperature from the outside! Gone are the days of opening kettle lids to check wort or mash temperatures!

The Fermentap Weldless Thermometer has a 2 inch probe, making it ideal for use in your Hot Liquor Tank or Boil Kettle. The 2 inch stem is much shorter than our 6 inch version, making this product a better suite for vessels with immersion heat exchangers. This Weldless Thermometer will work in Kettles & Kegs! The thermometer is our Fermentap Dial Thermometer, and features a hermetically sealed face, all stainless construction, and a fast response to temperature change!

Features:

  • Thermometer with 2″ Probe and 3″ Dial Face.
  • 2″ probe is short enough to stay out of the way of Immersion Chillers or heat exchangers.
  • All Stainless Construction.
  • High Temperature Food Grade Silicone Gasket.
  • Will work great with Kettles & Kegs!
  • Requires a 1″ hole to be drilled in the vessel for installation.
  • Replaces our WL113.

 

Limited Availability Deal of the Day: As of this posting, this is marked down to $27.99 as a MoreBeer Deal of the Day. Shipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

Weldless Thermometer (Stainless) – 2 in. WL313

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Stainless Stainless Weldless Bulkhead and Ball Valve – add a ball valve to your kettle or mash tun

Horiznext 3/4″ O.D. thread to 1/2 inch barb stainless steel home brewing bulkhead ball valve fitting kit

More Info


Highlighted Features
  • ➤Made of stainless steel 304, heavy duty, durable and corrosion resistance.
  • ➤ SPECIFICATION: The O.D. of the barb is 1/2", used to connect 1/2 inch I.D. hose. Barbed edges provide positive connection
  • ➤ INSTALL: The thread is NPT 1/2 (National Pipe Taper thread) . Pls drill a 3/4 inch diameter hole and intall with our home brewing valve kit.
  • ➤Maximum working pressure：290 psi. Working Temperature: -100 to +660 degrees ℉
  • ➤High temperature food-grade silicon seals.
Learn More

 

Use to add a ball valve to your compatible kettle, mash tun or HLT.

Horiznext 3/4″ O.D. thread to 1/2 inch barb stainless steel home brewing bulkhead ball valve fitting kit, for gallon beer pot brew kettle spigot mash tun – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

OxiClean Free Versatile...image
OxiClean Free Versatile Stain Remover Powder, 3 lb
$9.28 ($0.14 / load) -$0.29 $8.99 ($0.14 / load)
Vacuum Sealer Machine...image
Vacuum Sealer Machine with 55 Count 8"x12" Food Sealers Bags and 8"*79' Vacuum Sealer Roll, Inkbird Automatic Vacuum Sealers Machine with Built-in Cutter, Dry & Moist Sealing Modes for Food Storage
$65.99
Gamma2 Vittles Vault...image
Gamma2 Vittles Vault Airtight Dog Food Storage Container - Fits up to 35 Pounds of Dry Pet Food - Perfect for Cat and Puppy Kibble - BPA-Free Plastic - Made in the USA - 12" L x 16.75" H
$27.58 -$2.26 $25.32
FLOTit 2.0 -...image
FLOTit 2.0 - No Beer Left Behind Floating Dip Tube with Double Filter Inlet (DFI) of 500/300 micron for always clear beer, less beer waste and no clogging. Made in USA.
$29.00
Meat Thermometer Digital...image
Meat Thermometer Digital for Grilling and Cooking - ANDAXIN Waterproof Ultra-Fast Instant Read Food thermometers with Backlight & Calibration for Kitchen, Deep Fry, BBQ, Grill(Red/Black), LCD
$9.98
VEVOR Magnetic Stirrer,...image
VEVOR Magnetic Stirrer, 0-2000 RPM Stir Plate with Adjustable Speed Knob, 3000mL Plate Stirrer Kit, Stir Bar Included
JUNZHIDA 1/2
JUNZHIDA 1/2" ID Silicone Tubing, Food Grade 1/2" ID x 3/4" OD 10 Feet Length Pure Silicone Hoses High Temp for Home Brewing Winemaking
$14.99

adamztop5

10″ x 4″ Stainless Steel Kettle Hop Spider by G Francis

Brewing 4x10in Hopper Spider Strainer – Stainless Steel 300 Micron Mesh Homebrew Hops Beer & Tea Kettle Brew Filter

Brewing 4x10in Hopper Spider Strainer – Stainless Steel 300 Micron Mesh Homebrew Hops Beer & Tea Kettle Brew Filter

More Info

From the product description, check product page for current description, price and availability:

  • FILTER BEER, COFFEE, TEA: We love beer, but what is better than the beverage itself is the satisfaction of creating it; The G. Francis Brewing 4”x10” Inch Hopper Spider Strainer is designed for kettle brewing systems to contain hops while keeping debris out of pumps, chillers, and finished beer, resulting in a clearer beer and better taste; Suitable for brewing beer, filtering coffee, making compost tea, and putting into a boil pot
  • EASY TO USE: Two hook handles firmly secure this filter over the edge of your kettle and, during the boil, hops can be poured directly into the spider; For any standard electric brewing system
  • BUILT TO LAST: 300-micron mesh that will not wrinkle or damage easily; Frame made from firm stainless steel for strength and longevity; Will resist rust, corrosion, heat, and pressure; Enables easier sterilization prior to brewing and easy cleanup
  • EASY STORAGE: 2 kettle hanging hooks on top end of basket offers stability, user-friendliness, and versatility; Easier than beer cloth hops bags to remove, clean, and sanitize; Care of this hops spider is easy – you can put in the dishwasher as a separate load with no soap, or simply use a garden hose to wash it out; A no-rinse cleaner and sponge after you rinse it off also works
  • FILTER MORE: Filter has a 10-inch height and 4-inch diameter (25.4cm x 10.2cm); Suitable for hop pellet capacity of approximately 6 ounces (170g)

 

Brewing 4x10in Hopper Spider Strainer – Stainless Steel 300 Micron Mesh Homebrew Hops Beer & Tea Kettle Brew Filter – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Stainless Steel Tri-Clamp Thermometer! – $49.99, Save $10 + Free Ship Eligible, Limited Availability

1.5 in. T.C. Thermometer - 3.25 in. Face x 7.5 in. Probe H594Stainless Steel Tri-Clamp Thermometer from MoreBeer

More Info

From the product description, check product page for current description, price and availability:

Stainless steel dial thermometer with 1.5″ tri-clamp fitting. Thermometer face measures 3.25″ and measures from 32-220°F (0-100°C). Probe measures 7.5″ in length from the tip to the T.C. fitting.

 

Limited Availability Deal of the Day: As of this posting, this is marked down to $49.99 as a MoreBeer Deal of the Day. Shipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

1.5 in. T.C. Thermometer – 3.25 in. Face x 7.5 in. Probe H594

More Tri-Clover/Tri-Clamp!  Tri-Clamp Fittings at Proflow Dynamics


pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Fermentap Dial Thermometer – add a thermometer to your kettle – $18.99 + free ship eligible, limited availability

Fermentap Bi-Metal Dial Thermometer (3 in Face x 2.5 in Probe)

Fermentap Dial Thermometer – 3 in. Face x 2.5 in. Probe from MoreBeer

More Info

From the product description, check product page for current description, price and availability:

This thermometer will be a great addition to your homebrewing setup. The shorter 2.5″ probe works great in a boil kettle or hot liquor tank because it’s easier to work around. Keep in mind that some brewers feel this is too short for a mash tun and prefer a longer thermometer which reaches closer to the center of the mash. (See our MT514 for the same thermometer with a 6″ probe.)

Thermometer has an easy-to-read 3″ Face, and 1/2″ MPT threads on the back to connect to your kettle. The metal stem is durable and won’t break like glass can. Our reviewers agree that this is a great thermometer at a great price!

Standard Features:
All Stainless Construction
Fast Response to Temperature Change
Hermetically Sealed (Moisture Proof)
Within 1% Full Scale Accuracy
Easily Calibrated With a Flat Head Screwdriver
316 Stainless Steel Stem Material
Temperature range is 20-240F/0-110C. Calibration screw is 1/16th” hex nut.

 

Limited Availability Deal of the Day: As of this posting, this is marked down to $18.99 as a MoreBeer Deal of the Day. Shipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

Fermentap Dial Thermometer – 3 in. Face x 2.5 in. Probe MT512

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

1/2″ NPT 304 Stainless Steel Full Port Ball Valve

Eowpower 304 Stainless Steel Full Port Two-Piece Ball Valve, 1/2" NPT 2 Way, Blue Vinyl Handle, WOG1000

Eowpower 304 Stainless Steel Full Port Two-Piece Ball Valve, 1/2″ NPT 2 Way, Blue Vinyl Handle, WOG1000

More Info


Highlighted Features
  • Type: Two-Piece type ball valve, not 2 pieces of the product
  • Made of 304 stainless steel, handle with blue vinyl cover
  • Dimension: 1/2 inch
  • Weight: 224 g
Learn More

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

Eowpower 304 Stainless Steel Full Port Two-Piece Ball Valve, 1/2″ NPT 2 Way, Blue Vinyl Handle, WOG1000 – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Stainless Steel Cam Lock QDs at Proflow Dynamics – 15%+10% Off w/Stacking Deals

homebrew cam lock

Proflow Dynamics has an extensive selection of homebrew gear, fittings and disconnects anchored by their lineup of Stainless Steel Camlock QDs.

More About ProFlow Dynamics

 

Camlock QDs at PFD!  I’ve used ProFlow Dynamics Quick Disconnects on my kettles, mash tun, pumps and tubing for a longtime.  They have worked great for me.  I put male connectors kettles, mash tuns and pumps and use female connectors for tubing.  Standardizing on this (or the opposite) means you can use tubing as jumpers and always have the availability to connect your gear.

These are made from Stainless Steel and are available in lots of configurations.  Those are classified by Type and Size.  Type may mean something in “commercial cam lock fitting circles”, but I was initially confused by this.  Types are akin to model numbers.  For example, Type A is Female NPT to Male Cam and Groove.

  • Generally Great Prices: ProFlow already has generally great prices.  Some of the best everyday prices for fittings, QDs, ball locks & more
  • 15% Off Coupon: BREW15% takes an additional 15% off their lineup of homebrewing gear.
  • Another 10% Off: Using any link in this post will save you another 10%!

Camlock QDs at PFD | ProFlow’s Homebrew Lineup – remember coupon code BREW15% + any link in this post for ANOTHER 10% off


pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. pst:pfdcam

Hands on Review: Brewers Hardware Tri-Clover Sight Glasses

This review is by Homebrew Finds Contributor Brad Probert.  Brad is an engineer, expert homebrewer and experienced reviewer.  Grab a link to Brad’s website at the end of this review.

Brewers Hardware TC Sight Glasses

A large sight glass on a brew rig set-up can legitimately be classified as a luxury. There are various ways to assess your wort clarity during your brew session. During recirculation of the mash, or during vourlaf, you want to know when your wort is running clear and free of grain debris. Connect a sight glass into your recirculation loop and you can easily see the wort clarity without having to look for grain bits in a recirculation spray. It’s just right there in plain view.

Sight Glass showing cloudy wort during recirculationSight Glass showing clear wort during recirculation

 

Continue reading →