Category Archives: Kettle Accessories

10″ x 4″ Stainless Steel Kettle Hop Spider by G Francis

Brewing 4x10in Hopper Spider Strainer – Stainless Steel 300 Micron Mesh Homebrew Hops Beer & Tea Kettle Brew Filter

Brewing 4x10in Hopper Spider Strainer – Stainless Steel 300 Micron Mesh Homebrew Hops Beer & Tea Kettle Brew Filter

More Info

From the product description, check product page for current description, price and availability:

  • FILTER BEER, COFFEE, TEA: We love beer, but what is better than the beverage itself is the satisfaction of creating it; The G. Francis Brewing 4”x10” Inch Hopper Spider Strainer is designed for kettle brewing systems to contain hops while keeping debris out of pumps, chillers, and finished beer, resulting in a clearer beer and better taste; Suitable for brewing beer, filtering coffee, making compost tea, and putting into a boil pot
  • EASY TO USE: Two hook handles firmly secure this filter over the edge of your kettle and, during the boil, hops can be poured directly into the spider; For any standard electric brewing system
  • BUILT TO LAST: 300-micron mesh that will not wrinkle or damage easily; Frame made from firm stainless steel for strength and longevity; Will resist rust, corrosion, heat, and pressure; Enables easier sterilization prior to brewing and easy cleanup
  • EASY STORAGE: 2 kettle hanging hooks on top end of basket offers stability, user-friendliness, and versatility; Easier than beer cloth hops bags to remove, clean, and sanitize; Care of this hops spider is easy – you can put in the dishwasher as a separate load with no soap, or simply use a garden hose to wash it out; A no-rinse cleaner and sponge after you rinse it off also works
  • FILTER MORE: Filter has a 10-inch height and 4-inch diameter (25.4cm x 10.2cm); Suitable for hop pellet capacity of approximately 6 ounces (170g)

 

Brewing 4x10in Hopper Spider Strainer – Stainless Steel 300 Micron Mesh Homebrew Hops Beer & Tea Kettle Brew Filter – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Fermentap Dial Thermometer – add a thermometer to your kettle – $18.99 + free ship eligible, limited availability

Fermentap Bi-Metal Dial Thermometer (3 in Face x 2.5 in Probe)

Fermentap Dial Thermometer – 3 in. Face x 2.5 in. Probe from MoreBeer

More Info

From the product description, check product page for current description, price and availability:

This thermometer will be a great addition to your homebrewing setup. The shorter 2.5″ probe works great in a boil kettle or hot liquor tank because it’s easier to work around. Keep in mind that some brewers feel this is too short for a mash tun and prefer a longer thermometer which reaches closer to the center of the mash. (See our MT514 for the same thermometer with a 6″ probe.)

Thermometer has an easy-to-read 3″ Face, and 1/2″ MPT threads on the back to connect to your kettle. The metal stem is durable and won’t break like glass can. Our reviewers agree that this is a great thermometer at a great price!

Standard Features:
All Stainless Construction
Fast Response to Temperature Change
Hermetically Sealed (Moisture Proof)
Within 1% Full Scale Accuracy
Easily Calibrated With a Flat Head Screwdriver
316 Stainless Steel Stem Material
Temperature range is 20-240F/0-110C. Calibration screw is 1/16th” hex nut.

 

Limited Availability Deal of the Day: As of this posting, this is marked down to $18.99 as a MoreBeer Deal of the Day. Shipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

Fermentap Dial Thermometer – 3 in. Face x 2.5 in. Probe MT512

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Stainless Steel Cam Lock QDs at Proflow Dynamics – 15%+10% Off w/Stacking Deals

homebrew cam lock

Proflow Dynamics has an extensive selection of homebrew gear, fittings and disconnects anchored by their lineup of Stainless Steel Camlock QDs.

More About ProFlow Dynamics

 

Camlock QDs at PFD!  I’ve used ProFlow Dynamics Quick Disconnects on my kettles, mash tun, pumps and tubing for a longtime.  They have worked great for me.  I put male connectors kettles, mash tuns and pumps and use female connectors for tubing.  Standardizing on this (or the opposite) means you can use tubing as jumpers and always have the availability to connect your gear.

These are made from Stainless Steel and are available in lots of configurations.  Those are classified by Type and Size.  Type may mean something in “commercial cam lock fitting circles”, but I was initially confused by this.  Types are akin to model numbers.  For example, Type A is Female NPT to Male Cam and Groove.

  • Generally Great Prices: ProFlow already has generally great prices.  Some of the best everyday prices for fittings, QDs, ball locks & more
  • 15% Off Coupon: BREW15% takes an additional 15% off their lineup of homebrewing gear.
  • Another 10% Off: Using any link in this post will save you another 10%!

Camlock QDs at PFD | ProFlow’s Homebrew Lineup – remember coupon code BREW15% + any link in this post for ANOTHER 10% off


pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. pst:pfdcam

Our Discount is Back!… 15%+10% Off ProFlow Dynamics Homebrew Gear

Proflow Dynamics has an extensive selection of homebrew gear, fittings and disconnects anchored by their lineup of Stainless Steel Camlock QDs.

More About ProFlow Dynamics

 

Stacking Deals!

  • Generally Great Prices: ProFlow already has generally great prices.  Some of the best everyday prices for fittings, QDs, ball locks & more
  • 15% Off Coupon: BREW15% takes an additional 15% off their lineup of homebrewing gear.
  • Another 10% Off: Using any link in this post will save you another 10%!

ProFlow’s Homebrew Lineup << Use this link for 10% off + promo code BREW15% for another 15%

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. pst:pfdsale

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Weldless Stainless Steel Thermometer – add a thermometer to your kettle – from MoreBeer – $27.99 + Free Ship Eligible, Limited Availability

Weldless Thermometer (Stainless) - 2 in. WL313

More Info

From the product description, check product page for current description, price and availability:

If you want to be able to read the temperature of your brew without lifting a lid, this is the answer! With the new Fermentap Weldless Thermometer, you can upgrade any existing kettle or keg to read temperature from the outside! Gone are the days of opening kettle lids to check wort or mash temperatures!

The Fermentap Weldless Thermometer has a 2 inch probe, making it ideal for use in your Hot Liquor Tank or Boil Kettle. The 2 inch stem is much shorter than our 6 inch version, making this product a better suite for vessels with immersion heat exchangers. This Weldless Thermometer will work in Kettles & Kegs! The thermometer is our Fermentap Dial Thermometer, and features a hermetically sealed face, all stainless construction, and a fast response to temperature change!

Features:

  • Thermometer with 2″ Probe and 3″ Dial Face.
  • 2″ probe is short enough to stay out of the way of Immersion Chillers or heat exchangers.
  • All Stainless Construction.
  • High Temperature Food Grade Silicone Gasket.
  • Will work great with Kettles & Kegs!
  • Requires a 1″ hole to be drilled in the vessel for installation.
  • Replaces our WL113.

 

Limited Availability Deal of the Day: As of this posting, this is marked down to $27.99 as a MoreBeer Deal of the Day. Shipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

Weldless Thermometer (Stainless) – 2 in. WL313

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

10″ x 4″ Stainless Steel Kettle Hop Spider by G Francis

Brewing 4x10in Hopper Spider Strainer – Stainless Steel 300 Micron Mesh Homebrew Hops Beer & Tea Kettle Brew Filter

Brewing 4x10in Hopper Spider Strainer – Stainless Steel 300 Micron Mesh Homebrew Hops Beer & Tea Kettle Brew Filter

More Info

From the product description, check product page for current description, price and availability:

  • FILTER BEER, COFFEE, TEA: We love beer, but what is better than the beverage itself is the satisfaction of creating it; The G. Francis Brewing 4”x10” Inch Hopper Spider Strainer is designed for kettle brewing systems to contain hops while keeping debris out of pumps, chillers, and finished beer, resulting in a clearer beer and better taste; Suitable for brewing beer, filtering coffee, making compost tea, and putting into a boil pot
  • EASY TO USE: Two hook handles firmly secure this filter over the edge of your kettle and, during the boil, hops can be poured directly into the spider; For any standard electric brewing system
  • BUILT TO LAST: 300-micron mesh that will not wrinkle or damage easily; Frame made from firm stainless steel for strength and longevity; Will resist rust, corrosion, heat, and pressure; Enables easier sterilization prior to brewing and easy cleanup
  • EASY STORAGE: 2 kettle hanging hooks on top end of basket offers stability, user-friendliness, and versatility; Easier than beer cloth hops bags to remove, clean, and sanitize; Care of this hops spider is easy – you can put in the dishwasher as a separate load with no soap, or simply use a garden hose to wash it out; A no-rinse cleaner and sponge after you rinse it off also works
  • FILTER MORE: Filter has a 10-inch height and 4-inch diameter (25.4cm x 10.2cm); Suitable for hop pellet capacity of approximately 6 ounces (170g)

 

Brewing 4x10in Hopper Spider Strainer – Stainless Steel 300 Micron Mesh Homebrew Hops Beer & Tea Kettle Brew Filter – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Stainless Steel 1.5″ TC Weldless Bulkhead, Add TC to Your Gear

Bulkhead Compression Fitting, 1.5”TC Kettle Homebrew Weldless Bulkehad Compression Fitting 304 Stainless Steel Homebrew Kettle Bulkhead With Silicone Ring (1.5”)

More Info

From the product description, check product page for current description, price and availability:

  • 🌟 HIGH QUALITY — Made of 304 high‑hardness stainless steel,with food‑grade silicone gasket,sturdy and durable, wear‑resistant.good sealing performance
  • 🌟 WELDLESS DESIGNED — Add a 1.5″ TC flange to virtually any vessel,Weldless Bulkehad Compression Fitting allows you to add a TC port to any vessel no need welding or soldering,Ideal for FTSs and Brew Bucket ,Just drill a 41MM hole and tighen the locknut.
  • 🌟 APPLY TO — Suitable for kettles, beer kegs, cola kegs, soda buckets with a diameter less than 12in.Perfect for kettle or keg,it is a practical home brew kettle accessory
  • 🌟 HOW TO INSTALL — The front of the flange does not have flats for a wrench. The easiest way to hold the flange for tightening is to clamp any other TC parts on with the gasket and clamp. Once tight, you can insert a long rod or screw driver into the hole of the wingnut.
  • 🌟 PLEASE NOTE — Hole Size Required 32.5mm,the lock nut hex measures 48mm,works on kettle just as small as 12″ in diameter.

 

Bulkhead Compression Fitting, 1.5”TC Kettle Homebrew Weldless Bulkehad Compression Fitting 304 Stainless Steel Homebrew Kettle Bulkhead With Silicone Ring (1.5”) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

Stainless Steel Tri-Clamp Thermometer! – $49.99, Save $10 + Free Ship Eligible, Limited Availability

1.5 in. T.C. Thermometer - 3.25 in. Face x 7.5 in. Probe H594Stainless Steel Tri-Clamp Thermometer from MoreBeer

More Info

From the product description, check product page for current description, price and availability:

Stainless steel dial thermometer with 1.5″ tri-clamp fitting. Thermometer face measures 3.25″ and measures from 32-220°F (0-100°C). Probe measures 7.5″ in length from the tip to the T.C. fitting.

 

Limited Availability Deal of the Day: As of this posting, this is marked down to $49.99 as a MoreBeer Deal of the Day. Shipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

1.5 in. T.C. Thermometer – 3.25 in. Face x 7.5 in. Probe H594

More Tri-Clover/Tri-Clamp!  Tri-Clamp Fittings at Proflow Dynamics


pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Stainless Steel 1.5″ TC Weldless Bulkhead, Add TC to Your Gear

Bulkhead Compression Fitting, 1.5”TC Kettle Homebrew Weldless Bulkehad Compression Fitting 304 Stainless Steel Homebrew Kettle Bulkhead With Silicone Ring (1.5”)

More Info

From the product description, check product page for current description, price and availability:

  • 🌟 HIGH QUALITY — Made of 304 high‑hardness stainless steel,with food‑grade silicone gasket,sturdy and durable, wear‑resistant.good sealing performance
  • 🌟 WELDLESS DESIGNED — Add a 1.5″ TC flange to virtually any vessel,Weldless Bulkehad Compression Fitting allows you to add a TC port to any vessel no need welding or soldering,Ideal for FTSs and Brew Bucket ,Just drill a 41MM hole and tighen the locknut.
  • 🌟 APPLY TO — Suitable for kettles, beer kegs, cola kegs, soda buckets with a diameter less than 12in.Perfect for kettle or keg,it is a practical home brew kettle accessory
  • 🌟 HOW TO INSTALL — The front of the flange does not have flats for a wrench. The easiest way to hold the flange for tightening is to clamp any other TC parts on with the gasket and clamp. Once tight, you can insert a long rod or screw driver into the hole of the wingnut.
  • 🌟 PLEASE NOTE — Hole Size Required 32.5mm,the lock nut hex measures 48mm,works on kettle just as small as 12″ in diameter.

 

Bulkhead Compression Fitting, 1.5”TC Kettle Homebrew Weldless Bulkehad Compression Fitting 304 Stainless Steel Homebrew Kettle Bulkhead With Silicone Ring (1.5”) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

Convert Garden Hose Thread GHT to Stainless Steel Camlock! + Hands on Review

Camlock By Garden Hose Thread

Camlock QDs at PFD!  I’ve used ProFlow Dynamics Quick Disconnects on my kettles, mash tun, pumps and tubing for a longtime.  They have worked great for me.  I put male connectors kettles, mash tuns and pumps and use female connectors for tubing.  Standardizing on this (or the opposite) means you can use tubing as jumpers and always have the availability to connect your gear.

These are made from Stainless Steel and are available in lots of configurations.  Those are classified by Type and Size.  Type may mean something in “commercial cam lock fitting circles”, but I was initially confused by this.  Types are akin to model numbers.  For example, Type A is Female NPT to Male Cam and Groove.

  • Generally Great Prices: ProFlow already has generally great prices.  Some of the best everyday prices for fittings, QDs, ball locks & more
  • 15% Off Coupon: BREW15% takes an additional 15% off their lineup of homebrewing gear.
  • Another 10% Off: Using any link in this post will save you another 10%!

If you’ve standardized on Camlock Disconnects and are looking to simplify brew day, ProFlow Dynamics has a fitting that converts Garden Hose Threads (GHT) to Camlock.

Camlock By Garden Hose Thread

Camlock QDs at PFD | ProFlow’s Homebrew Lineup – remember coupon code BREW15% + any link in this post for ANOTHER 10% off

Camlock Hands on Review!


Proflow Dynamics has an extensive selection of homebrew gear, fittings and disconnects anchored by their lineup of Stainless Steel Camlock QDs.

More About ProFlow Dynamics

 


pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. pst:pfdght

DERNORD 2 Pcs Sanitary Male Threaded Ferrule Pipe Fittings + SUS304 Tri-clamp + Viton Gasket

DERNORD 2 Pcs Sanitary Male Threaded Ferrule Pipe Fittings + SUS304 Tri-clamp (Tri-Clover Clamp) + Viton Gasket (Male Threaded Pipe Size:1/2 Inch DN15)

DERNORD 2 Pcs Sanitary Male Threaded Ferrule Pipe Fittings + SUS304 Tri-clamp (Tri-Clover Clamp) + Viton Gasket (Male Threaded Pipe Size:1/2 Inch DN15)

More Info

From the product description, check product page for current description, price and availability:

  • 1 x Adjustable Tri Clamp, 2 x Male Threaded Fitting, 1 x Viton Gasket.304 Stainless Steel Material
  • Clamp Size: 1.5″ Tri Clamp; Ferrule Size: 50.5mm Pipe OD
  • Male Threaded Pipe Size:1/2 Inch DN15
  • Easy tighten thumb screw
  • Fit for all other homebrew stuff sanitary fittings

 

DERNORD 2 Pcs Sanitary Male Threaded Ferrule Pipe Fittings + SUS304 Tri-clamp (Tri-Clover Clamp) + Viton Gasket (Male Threaded Pipe Size:1/2 Inch DN15) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


More Tri-Clover/Tri-Clamp!  Tri-Clamp Fittings at Proflow Dynamics

Also: Convert Your Chugger or March Pump to Tri-Clamp Fittings

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

OxiClean Free Versatile...image
OxiClean Free Versatile Stain Remover Powder, 3 lb
$8.29 ($0.13 / load)
Vacuum Sealer Machine...image
Vacuum Sealer Machine with 55 Count 8"x12" Food Sealers Bags and 8"*79' Vacuum Sealer Roll, Inkbird Automatic Vacuum Sealers Machine with Built-in Cutter, Dry & Moist Sealing Modes for Food Storage
$65.99
Gamma2 Vittles Vault...image
Gamma2 Vittles Vault Airtight Dog Food Storage Container - Fits up to 35 Pounds of Dry Pet Food - Perfect for Cat and Puppy Kibble - BPA-Free Plastic - Made in the USA - 12" L x 16.75" H
$32.45
FLOTit 2.0 -...image
FLOTit 2.0 - No Beer Left Behind Floating Dip Tube with Double Filter Inlet (DFI) of 500/300 micron for always clear beer, less beer waste and no clogging. Made in USA.
$29.00
Meat Thermometer Digital...image
Meat Thermometer Digital for Grilling and Cooking - ANDAXIN Waterproof Ultra-Fast Instant Read Food thermometers with Backlight & Calibration for Kitchen, Deep Fry, BBQ, Grill(Red/Black), LCD
$6.99
VEVOR Magnetic Stirrer,...image
VEVOR Magnetic Stirrer, 0-2000 RPM Stir Plate with Adjustable Speed Knob, 3000mL Plate Stirrer Kit, Stir Bar Included
$16.84

adamztop5

Stainless Steel Cam Lock QDs at Proflow Dynamics – 15%+10% Off w/Stacking Deals

homebrew cam lock

Proflow Dynamics has an extensive selection of homebrew gear, fittings and disconnects anchored by their lineup of Stainless Steel Camlock QDs.

More About ProFlow Dynamics

 

Camlock QDs at PFD!  I’ve used ProFlow Dynamics Quick Disconnects on my kettles, mash tun, pumps and tubing for a longtime.  They have worked great for me.  I put male connectors kettles, mash tuns and pumps and use female connectors for tubing.  Standardizing on this (or the opposite) means you can use tubing as jumpers and always have the availability to connect your gear.

These are made from Stainless Steel and are available in lots of configurations.  Those are classified by Type and Size.  Type may mean something in “commercial cam lock fitting circles”, but I was initially confused by this.  Types are akin to model numbers.  For example, Type A is Female NPT to Male Cam and Groove.

  • Generally Great Prices: ProFlow already has generally great prices.  Some of the best everyday prices for fittings, QDs, ball locks & more
  • 15% Off Coupon: BREW15% takes an additional 15% off their lineup of homebrewing gear.
  • Another 10% Off: Using any link in this post will save you another 10%!

Camlock QDs at PFD | ProFlow’s Homebrew Lineup – remember coupon code BREW15% + any link in this post for ANOTHER 10% off

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. pst:pfdcam

15%+10% Off ProFlow Dynamics Homebrew Gear – Disconnects, Fittings, Pumps, False Bottoms, Kettle Screens, Hop Filters, Pickups & More

Proflow Dynamics has an extensive selection of homebrew gear, fittings and disconnects anchored by their lineup of Stainless Steel Camlock QDs.

More About ProFlow Dynamics

 

Stacking Deals!

  • Generally Great Prices: ProFlow already has generally great prices.  Some of the best everyday prices for fittings, QDs, ball locks & more
  • 15% Off Coupon: BREW15% takes an additional 15% off their lineup of homebrewing gear.
  • Another 10% Off: Using any link in this post will save you another 10%!

ProFlow’s Homebrew Lineup << Use this link for 10% off + promo code BREW15% for another 15%

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. pst:pfdsale

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Stainless Steel Filter Basket Hop Spider – 4″ x 10″, 300 Micron by Fangfang

Beer Dry Hopper Filter,Stainless Steel Hop Strainer Micron Mesh Beer Filter Cartridge (4 x 10 inch)

Stainless Steel Basket Beer Filter Basket.

More Info

From the product description, check product page for current description, price and availability:

  • Dry hopper perfect for beer,coffee,beverage and other drinks,use to filterout impurities,make the beer, drinks taste better
  • Beer brewing filter great for your home brewing equipment and easy to clean
  • These dry hop filters are great for holding hops in your cornelius kegs
  • Easy to Use: Simply place this filter over the edge of your kettle and, during the boil, hops can be poured directly into the spider
  • 300 micron hop spider is made of quality stainless steel material, strong and durable to use

 

A homebrewing application of this SS Filter basket is to use it in your boil kettle as a hop spider of sorts.

Beer Dry Hopper Filter,Stainless Steel Hop Strainer Micron Mesh Beer Filter Cartridge (4 x 10 inch) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link



OxiClean Free Versatile...image
OxiClean Free Versatile Stain Remover Powder, 3 lb
$8.29 ($0.13 / load)
Vacuum Sealer Machine...image
Vacuum Sealer Machine with 55 Count 8"x12" Food Sealers Bags and 8"*79' Vacuum Sealer Roll, Inkbird Automatic Vacuum Sealers Machine with Built-in Cutter, Dry & Moist Sealing Modes for Food Storage
$65.99
Gamma2 Vittles Vault...image
Gamma2 Vittles Vault Airtight Dog Food Storage Container - Fits up to 35 Pounds of Dry Pet Food - Perfect for Cat and Puppy Kibble - BPA-Free Plastic - Made in the USA - 12" L x 16.75" H
$32.45
FLOTit 2.0 -...image
FLOTit 2.0 - No Beer Left Behind Floating Dip Tube with Double Filter Inlet (DFI) of 500/300 micron for always clear beer, less beer waste and no clogging. Made in USA.
$29.00
Meat Thermometer Digital...image
Meat Thermometer Digital for Grilling and Cooking - ANDAXIN Waterproof Ultra-Fast Instant Read Food thermometers with Backlight & Calibration for Kitchen, Deep Fry, BBQ, Grill(Red/Black), LCD
$6.99
VEVOR Magnetic Stirrer,...image
VEVOR Magnetic Stirrer, 0-2000 RPM Stir Plate with Adjustable Speed Knob, 3000mL Plate Stirrer Kit, Stir Bar Included
$16.84

adamztop5

Stainless Steel 1.5″ TC Weldless Bulkhead, Add TC to Your Gear

Bulkhead Compression Fitting, 1.5”TC Kettle Homebrew Weldless Bulkehad Compression Fitting 304 Stainless Steel Homebrew Kettle Bulkhead With Silicone Ring (1.5”)

More Info

From the product description, check product page for current description, price and availability:

  • 🌟 HIGH QUALITY — Made of 304 high‑hardness stainless steel,with food‑grade silicone gasket,sturdy and durable, wear‑resistant.good sealing performance
  • 🌟 WELDLESS DESIGNED — Add a 1.5″ TC flange to virtually any vessel,Weldless Bulkehad Compression Fitting allows you to add a TC port to any vessel no need welding or soldering,Ideal for FTSs and Brew Bucket ,Just drill a 41MM hole and tighen the locknut.
  • 🌟 APPLY TO — Suitable for kettles, beer kegs, cola kegs, soda buckets with a diameter less than 12in.Perfect for kettle or keg,it is a practical home brew kettle accessory
  • 🌟 HOW TO INSTALL — The front of the flange does not have flats for a wrench. The easiest way to hold the flange for tightening is to clamp any other TC parts on with the gasket and clamp. Once tight, you can insert a long rod or screw driver into the hole of the wingnut.
  • 🌟 PLEASE NOTE — Hole Size Required 32.5mm,the lock nut hex measures 48mm,works on kettle just as small as 12″ in diameter.

 

Bulkhead Compression Fitting, 1.5”TC Kettle Homebrew Weldless Bulkehad Compression Fitting 304 Stainless Steel Homebrew Kettle Bulkhead With Silicone Ring (1.5”) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

10″ x 4″ Stainless Steel Kettle Hop Spider by G Francis

Brewing 4x10in Hopper Spider Strainer – Stainless Steel 300 Micron Mesh Homebrew Hops Beer & Tea Kettle Brew Filter

Brewing 4x10in Hopper Spider Strainer – Stainless Steel 300 Micron Mesh Homebrew Hops Beer & Tea Kettle Brew Filter

More Info

From the product description, check product page for current description, price and availability:

  • FILTER BEER, COFFEE, TEA: We love beer, but what is better than the beverage itself is the satisfaction of creating it; The G. Francis Brewing 4”x10” Inch Hopper Spider Strainer is designed for kettle brewing systems to contain hops while keeping debris out of pumps, chillers, and finished beer, resulting in a clearer beer and better taste; Suitable for brewing beer, filtering coffee, making compost tea, and putting into a boil pot
  • EASY TO USE: Two hook handles firmly secure this filter over the edge of your kettle and, during the boil, hops can be poured directly into the spider; For any standard electric brewing system
  • BUILT TO LAST: 300-micron mesh that will not wrinkle or damage easily; Frame made from firm stainless steel for strength and longevity; Will resist rust, corrosion, heat, and pressure; Enables easier sterilization prior to brewing and easy cleanup
  • EASY STORAGE: 2 kettle hanging hooks on top end of basket offers stability, user-friendliness, and versatility; Easier than beer cloth hops bags to remove, clean, and sanitize; Care of this hops spider is easy – you can put in the dishwasher as a separate load with no soap, or simply use a garden hose to wash it out; A no-rinse cleaner and sponge after you rinse it off also works
  • FILTER MORE: Filter has a 10-inch height and 4-inch diameter (25.4cm x 10.2cm); Suitable for hop pellet capacity of approximately 6 ounces (170g)

 

Brewing 4x10in Hopper Spider Strainer – Stainless Steel 300 Micron Mesh Homebrew Hops Beer & Tea Kettle Brew Filter – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

6″ x 14″ Stainless Steel Kettle Hop Spider

Hops Filter, 6x14 inch Stainless Steel Cylinder Hanging Hops Spider Strainer, Suitable for Beer Brewing Filtration

Hops Filter, 6×14 inch Stainless Steel Cylinder Hanging Hops Spider Strainer, Suitable for Beer Brewing Filtration

More Info

From the product description, check product page for current description, price and availability:

  • FILTER BEER, COFFEE, TEA: We love beer, but what is better than the beverage itself is the satisfaction of creating it; The G. Francis Brewing 6” x 14” Inch Hopper Spider Strainer is designed for kettle brewing systems to contain hops while keeping debris out of pumps, chillers, and finished beer, resulting in a clearer beer and better taste; Suitable for brewing beer, filtering coffee, making compost tea, and putting into a boil pot
  • EASY TO USE: Two hook handles firmly secure this filter over the edge of your kettle and, during the boil, hops can be poured directly into the spider; For any standard electric brewing system
  • BUILT TO LAST: 300-micron mesh that will not wrinkle or damage easily; Frame made from firm stainless steel for strength and longevity; Will resist rust, corrosion, heat, and pressure; Enables easier sterilization prior to brewing and easy cleanup
  • EASY STORAGE: 2 kettle hanging hooks on top end of basket offers stability, user-friendliness, and versatility; Easier than beer cloth hops bags to remove, clean, and sanitize; Care of this hops spider is easy – you can put in the dishwasher as a separate load with no soap, or simply use a garden hose to wash it out; A no-rinse cleaner and sponge after you rinse it off also works
  • FILTER MORE: Filter has a 14-inch height and 6-inch diameter (35.6cm x 15.2cm); Suitable for hop pellet capacity of approximately 8 ounces (227g)

 

Hops Filter, 6×14 inch Stainless Steel Cylinder Hanging Hops Spider Strainer, Suitable for Beer Brewing Filtration – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Stainless Steel Cam Lock QDs at Proflow Dynamics – 15%+10% Off w/Stacking Deals

homebrew cam lock

Proflow Dynamics has an extensive selection of homebrew gear, fittings and disconnects anchored by their lineup of Stainless Steel Camlock QDs.

More About ProFlow Dynamics

 

Camlock QDs at PFD!  I’ve used ProFlow Dynamics Quick Disconnects on my kettles, mash tun, pumps and tubing for a longtime.  They have worked great for me.  I put male connectors kettles, mash tuns and pumps and use female connectors for tubing.  Standardizing on this (or the opposite) means you can use tubing as jumpers and always have the availability to connect your gear.

These are made from Stainless Steel and are available in lots of configurations.  Those are classified by Type and Size.  Type may mean something in “commercial cam lock fitting circles”, but I was initially confused by this.  Types are akin to model numbers.  For example, Type A is Female NPT to Male Cam and Groove.

  • Generally Great Prices: ProFlow already has generally great prices.  Some of the best everyday prices for fittings, QDs, ball locks & more
  • 15% Off Coupon: BREW15% takes an additional 15% off their lineup of homebrewing gear.
  • Another 10% Off: Using any link in this post will save you another 10%!

Camlock QDs at PFD | ProFlow’s Homebrew Lineup – remember coupon code BREW15% + any link in this post for ANOTHER 10% off


pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. pst:pfdcam

Weldless Stainless Steel Thermometer – add a thermometer to your kettle – from MoreBeer – $27.99 + Free Ship Eligible, Limited Availability

Weldless Thermometer (Stainless) - 2 in. WL313

More Info

From the product description, check product page for current description, price and availability:

If you want to be able to read the temperature of your brew without lifting a lid, this is the answer! With the new Fermentap Weldless Thermometer, you can upgrade any existing kettle or keg to read temperature from the outside! Gone are the days of opening kettle lids to check wort or mash temperatures!

The Fermentap Weldless Thermometer has a 2 inch probe, making it ideal for use in your Hot Liquor Tank or Boil Kettle. The 2 inch stem is much shorter than our 6 inch version, making this product a better suite for vessels with immersion heat exchangers. This Weldless Thermometer will work in Kettles & Kegs! The thermometer is our Fermentap Dial Thermometer, and features a hermetically sealed face, all stainless construction, and a fast response to temperature change!

Features:

  • Thermometer with 2″ Probe and 3″ Dial Face.
  • 2″ probe is short enough to stay out of the way of Immersion Chillers or heat exchangers.
  • All Stainless Construction.
  • High Temperature Food Grade Silicone Gasket.
  • Will work great with Kettles & Kegs!
  • Requires a 1″ hole to be drilled in the vessel for installation.
  • Replaces our WL113.

 

Limited Availability Deal of the Day: As of this posting, this is marked down to $27.99 as a MoreBeer Deal of the Day. Shipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

Weldless Thermometer (Stainless) – 2 in. WL313

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Weldless Brewer’s Edge Pot Thermometer – includes bulkhead…. $12.50, save 50%

Weldless Brewer's Edge® Pot Thermometer

Weldless Brewer’s Edge® Pot Thermometer via William’s Brewing

More Info

From the product description, check product page for current description, price and availability:

The Brewer’s Edge Weldless Thermometer takes a precision stainless steel dial thermometer, and adds a unique sliding reference pointer. Features a 3″ dial and 3″ probe. Just set the sliding red pointer to your reference point (say 154 F for mashing) and it provides quick visual reference that you are at your target temperature. Great for mash tun and sparge water tanks, although you do not really need a thermometer if you are just making malt extract beers.

Easy to Install – Unlike Weldless Pot Thermometers with loose washers and O rings, The Brewer’s Edge Weldless Thermometer features a unique recessed silicone O ring mount, for a positive seal in any pot. You only need to drill a 7/16″ hole, the smallest (and easiest to drill hole) of any weldless pot thermometer.

Features a 60� to 220�F. range, 2� calibrations, a tempered glass lens, and a resetting screw, so you can precisely adjust the thermometer for a particular temperature range. Although heat resistant, it should not be allowed to contact open flame or come near open flame, so it must be installed far enough up on your pot to avoid being licked by burner flames.

 

  • This is marked down a whopping 50% to just $12.50.
  • Shipping is free or reasonably priced flat rate to addresses in the lower 48 states depending on your order size for most items.

Weldless Brewer’s Edge® Pot Thermometer

Check sale or product page for current availability & pricing


This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.