Category Archives: Kettle Accessories

Four x 1/2 NPT x 1/2 Barb – 304 Stainless Steel

Horiznext 304 Stainless Steel 1/2" Barb Hose to 1/2 NPT Home Brew pipe barbed nipple Fitting. Pack of 4

Horiznext 304 Stainless Steel 1/2″ Barb Hose to 1/2 NPT Home Brew pipe barbed nipple Fitting. Pack of 4

More Info

From the product description, check product page for current description, price and availability:

  • Made of stainless steel 304, heavy duty, durable and corrosion resistance.
  • 1/2″ NPT (National Pipe Taper threads) x 1/2″ inner diameter hose
  • Great for attaching 1/2″ inner diameter hose, and 1/2″ ball valve
  • Maximum working pressure of 20000 psi
  • Temperature range from -212 to +1472 degrees ℉

 

Horiznext 304 Stainless Steel 1/2″ Barb Hose to 1/2 NPT Home Brew pipe barbed nipple Fitting. Pack of 4 – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

The SpinCycle Whirlpool Returns from Brew Hardware!

spincycle whirlpool return

Recirculating wort back into the kettle to whirlpool the wort makes for much faster cooling and will also make a concentrated pile of trub and hop particles in the center of the kettle bottom. This whirlpool port assembly installs high up on your kettle wall above the typical wort level and then extends down before curving to the side to force the recirculated liquid towards the sidewall.

The BrewHardware purpose-built unit called the Spin Cycle starts with a weldless bulkhead design with captured O-ring and extended male threads and has the 1/2″ drop tube fully welded in. The result is a compact way to whirlpool without the need to put a ball valve on the port (the port is meant to be installed well above the max liquid level). It includes the base unit with the welded drop tube, the captured high temp silicone oring, a thin SS washer and a 1/2″ NPS locknut to hold it all together.

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. prod:spincycle

COMOWARE Titanium Coated Step Drill Bit [Add a Weldless Bulkhead to Your Kettle]

COMOWARE Step Drill Bit - Titanium Coated, Double Cutting Blades, High Speed Steel, Short Length Drill Bit

COMOWARE Step Drill Bit – Titanium Coated, Double Cutting Blades, High Speed Steel, Short Length Drill Bit

More Info

From the product description, check product page for current description, price and availability:

  • HSS Titanium Coating – High speed steel along with titanium coating ensures outstanding durability and sharpness, can reduces the friction, runs cooler.
  • Meet Your Demands – With the step drill bits we offered, you can process different kinds of diameter holes, which greatly saves you a lot of trouble.Great for steel sheets/ aluminum sheets/ copper/ plastic/ wood board and many other types of sheet metal with ease countersunk. Suitable for Home DIY, and General Building/ Engineering Use.
  • Design – The split point tip is at 118 degrees to increase the wear resistance. The two flute design provides a smoother cutting, allows the material particles escape easily for a much more clean drilling operation.
  • Safety and Stability- The 3 flat shank is better clamped on the pistol drill to prevent slippage and shedding during the rotation.
  • Size Includes – One drill with 10 steps: 1/4″, 3/8″, 1/2″, 5/8″, 3/4″, 7/8″, 1″, 1-1/8″, 1-1/4″, 1-3/8″ can fit the majority of brands currently on the market.

 

Possible Uses: Drill a hole in your kettle based brew kettle, mlt or hlt so that you can add a weldless bulkhead, ball valve or thermometer.

COMOWARE Step Drill Bit – Titanium Coated, Double Cutting Blades, High Speed Steel, Short Length Drill Bit – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

The SpinCycle Whirlpool Returns from Brew Hardware!

spincycle whirlpool return

Recirculating wort back into the kettle to whirlpool the wort makes for much faster cooling and will also make a concentrated pile of trub and hop particles in the center of the kettle bottom. This whirlpool port assembly installs high up on your kettle wall above the typical wort level and then extends down before curving to the side to force the recirculated liquid towards the sidewall.

The BrewHardware purpose-built unit called the Spin Cycle starts with a weldless bulkhead design with captured O-ring and extended male threads and has the 1/2″ drop tube fully welded in. The result is a compact way to whirlpool without the need to put a ball valve on the port (the port is meant to be installed well above the max liquid level). It includes the base unit with the welded drop tube, the captured high temp silicone oring, a thin SS washer and a 1/2″ NPS locknut to hold it all together.

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. prod:spincycle

The SpinCycle Whirlpool Returns from Brew Hardware!

spincycle whirlpool return

Recirculating wort back into the kettle to whirlpool the wort makes for much faster cooling and will also make a concentrated pile of trub and hop particles in the center of the kettle bottom. This whirlpool port assembly installs high up on your kettle wall above the typical wort level and then extends down before curving to the side to force the recirculated liquid towards the sidewall.

The BrewHardware purpose-built unit called the Spin Cycle starts with a weldless bulkhead design with captured O-ring and extended male threads and has the 1/2″ drop tube fully welded in. The result is a compact way to whirlpool without the need to put a ball valve on the port (the port is meant to be installed well above the max liquid level). It includes the base unit with the welded drop tube, the captured high temp silicone oring, a thin SS washer and a 1/2″ NPS locknut to hold it all together.

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. prod:spincycle

Concord 304 Stainless Weldless Bulkhead, Silicone Gaskets – $9.98 + Free Shipping

CONCORD 1/2" Weldless Bulkhead Fitting for Beer Wine. Full 304 Stainless Steel

1/2″ Weldless Bulkhead.  All metal parts are made from 304 stainless

From the product description, check product page for current description, price and availability:

  • Easily attaches to any 1/2″ NPT Ball Valve, Thermometer, Etc
  • Easily installs onto your weldless brew kettle setup.
  • Solid 304 Stainless pieces will ensure to last a lifetime.
  • Silicone O-rings

As if this posting, this is eBay offering is selling for just $9.98.  Shipping is also free to many US addresses.

CONCORD 1/2″ Weldless Bulkhead Fitting for Beer Wine. Full 304 Stainless Steel

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Prices, shipping and availability can change quickly. Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this post was published; however, they may differ from those you see when you visit the product page. Check the product page for current price, description and availability.  rp:ebayconcordbulkhead

Concord DIY Homebrew Kettle Conversion Kit – $42.48 + Free Shipping

CONCORD Home Brew Kettle Stainless Steel DIY Kit w/ Thermometer Ball Valves

CONCORD Home Brew Kettle Stainless Steel DIY Kit w/ Thermometer Ball Valves

More Info

From the product description, check product page for current description, price and availability:

Comes with everything you need to create your own weld less brew kettle.

-This Listing includes the DIY KIT ONLY,  KETTLE NOT INCLUDED-

Kit Includes:

  • 1pc 1/2″ Ball Valve
  • 1pc 3″ Glass Thermometer
  • 1pc 1/2″ Barbed Hose Fitting
  • 2pc 1/2″ Weldless Bulkhead Fitting
  • 1pc 1/2″ Nipple Fitting
  • Teflon Tape
  • 1/2″ Hole Drill Bit

Material:

  • All Parts are made from Commercial Quality 18/10 Stainless Steels, Fully Polished.
  • All Accessories are made of quality 304 Stainless Steel with the exception of the
    barbed hose which is made from higher quality 316 Stainless Steel.
  • Easy to assemble and remove weld less fittings allows for easy cleaning.
  • Every hardware you need to assemble your own brew kettle is included, so all
    you need is a electric drill and drilling oil to get started

 

 

As if this posting, this is eBay offering is selling for $42.48.  Shipping is also free to many US addresses.

CONCORD Home Brew Kettle Stainless Steel DIY Kit w/ Thermometer Ball Valves

Also: True Bulkheads from Brew Hardware | Recent Kettle Finds

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Prices, shipping and availability can change quickly. Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this post was published; however, they may differ from those you see when you visit the product page. Check the product page for current price, description and availability.  rp:ebayconcorddiy

Stainless Steel Cam Lock QDs at Proflow Dynamics – 15%+10% Off w/Stacking Deals

homebrew cam lock

Proflow Dynamics has an extensive selection of homebrew gear, fittings and disconnects anchored by their lineup of Stainless Steel Camlock QDs.

More About ProFlow Dynamics

 

Camlock QDs at PFD!  I’ve used ProFlow Dynamics Quick Disconnects on my kettles, mash tun, pumps and tubing for a longtime.  They have worked great for me.  I put male connectors kettles, mash tuns and pumps and use female connectors for tubing.  Standardizing on this (or the opposite) means you can use tubing as jumpers and always have the availability to connect your gear.

These are made from Stainless Steel and are available in lots of configurations.  Those are classified by Type and Size.  Type may mean something in “commercial cam lock fitting circles”, but I was initially confused by this.  Types are akin to model numbers.  For example, Type A is Female NPT to Male Cam and Groove.

  • Generally Great Prices: ProFlow already has generally great prices.  Some of the best everyday prices for fittings, QDs, ball locks & more
  • 15% Off Coupon: BREW15% takes an additional 15% off their lineup of homebrewing gear.
  • Another 10% Off: Using any link in this post will save you another 10%!

Camlock QDs at PFD | ProFlow’s Homebrew Lineup – remember coupon code BREW15% + any link in this post for ANOTHER 10% off


pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. pst:pfdcam

The SpinCycle Whirlpool Returns from Brew Hardware!

spincycle whirlpool return

Recirculating wort back into the kettle to whirlpool the wort makes for much faster cooling and will also make a concentrated pile of trub and hop particles in the center of the kettle bottom. This whirlpool port assembly installs high up on your kettle wall above the typical wort level and then extends down before curving to the side to force the recirculated liquid towards the sidewall.

The BrewHardware purpose-built unit called the Spin Cycle starts with a weldless bulkhead design with captured O-ring and extended male threads and has the 1/2″ drop tube fully welded in. The result is a compact way to whirlpool without the need to put a ball valve on the port (the port is meant to be installed well above the max liquid level). It includes the base unit with the welded drop tube, the captured high temp silicone oring, a thin SS washer and a 1/2″ NPS locknut to hold it all together.

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. prod:spincycle

The Kettle Spider Hop Spider from MoreBeer – $26.99 + Free Ship Eligible, Limited Availability

The Kettle Spider

The Kettle Spider from MoreBeer

More Info

From the product description, check product page for current description, price and availability:

Make your brew day easier and your additions more efficient with a MoreBeer! Kettle Spider. Attach one of our reusable nylon bags with drawstring and use the Kettle Spider to steep grains in an extract batch or use for multiple hop additions in a boil.

Often when you use a bag for hops or grain you are not getting the full extraction of flavor or alpha acids. With an ideal placement in the middle of your kettle, the Kettle Spider aids in extraction of flavor, oils and alpha acids. Get MoreFlavor!

The Kettle Spider makes bags easier to use with hops because it is open throughout the boil. Just keep adding the hops your recipe calls for. Also keeps bags off the bottom of the kettle, preventing a hole from developing in your bag.

Made from 304 Stainless steel with adjustable anti-slip silicone sleeves the Kettle Spider will fit most all kettles. Diameter of the hole: 3 3/4″. Length of Arms: 10″.

To see our extensive collection of hops, click here.

Tip: Instead of tying the bag on you can optionally use a 4″ Tri-Clamp fitting to upgrade your setup, and firmly connect a bag to the spider! A customer using this product also suggests using a Keg Lid O-Ring to hold your bag in place.

Max Kettle Diameter – 23

 

Limited Availability Deal of the Day: As of this posting, this on sale as as a MoreBeer Deal of the Day. Shipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

The Kettle Spider AG434


pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Add a Ball Valve to Your Kettle – Stainless Bulkhead + Ball Valve

Horiznext 1/2" homebrew ball valve stainless steel weldless bulkhead for Home Brewing KettleHoriznext 1/2″ homebrew ball valve stainless steel weldless bulkhead for Home Brewing Kettle

More Info

From the product description, check product page for current description, price and availability:

  • Made of stainless steel 304, heavy duty, durable and corrosion resistance.
  • High temperature silicon seals.
  • 1/2″ NPT (National Pipe Taper threads) x 1/2″ inner diameter hose
  • Working Temperature: -212 to +1472 degrees ℉

 

Horiznext 1/2″ homebrew ball valve stainless steel weldless bulkhead for Home Brewing Kettle – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

Dernord Ball Valve + Bulkhead – 304 Stainless Steel

DERNORD 1/2 Inch Weldless Ball Valve Stainless Steel 304 Bulkhead For Home Brew Kettle (1/2" NPT to 1/2" Barb Hose)

DERNORD 1/2 Inch Weldless Ball Valve Stainless Steel 304 Bulkhead For Home Brew Kettle (1/2″ NPT to 1/2″ Barb Hose)

More Info

From the product description, check product page for current description, price and availability:

  • 1/2 Inch Stainless Steel 2 piece Full Port Ball Valve
  • 1/2 Inch Stainless Steel Hose Barb
  • 1/2 Inch weldless bulkhead fitting fits 7/8 Inch kettle hole
  • WOG1000 working pressure rating (1000psi) to withstand high pressure and extreme temperatures
  • Rigorous testing standards prove minimal corrosion and rust along with easy cleaning

 

DERNORD 1/2 Inch Weldless Ball Valve Stainless Steel 304 Bulkhead For Home Brew Kettle (1/2″ NPT to 1/2″ Barb Hose) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

OxiClean Free Versatile...image
OxiClean Free Versatile Stain Remover Powder, 3 lb
$8.29 ($0.13 / load)
Vacuum Sealer Machine...image
Vacuum Sealer Machine with 55 Count 8"x12" Food Sealers Bags and 8"*79' Vacuum Sealer Roll, Inkbird Automatic Vacuum Sealers Machine with Built-in Cutter, Dry & Moist Sealing Modes for Food Storage
$65.99
Gamma2 Vittles Vault...image
Gamma2 Vittles Vault Airtight Dog Food Storage Container - Fits up to 35 Pounds of Dry Pet Food - Perfect for Cat and Puppy Kibble - BPA-Free Plastic - Made in the USA - 12" L x 16.75" H
$32.45
FLOTit 2.0 -...image
FLOTit 2.0 - No Beer Left Behind Floating Dip Tube with Double Filter Inlet (DFI) of 500/300 micron for always clear beer, less beer waste and no clogging. Made in USA.
$29.00
Meat Thermometer Digital...image
Meat Thermometer Digital for Grilling and Cooking - ANDAXIN Waterproof Ultra-Fast Instant Read Food thermometers with Backlight & Calibration for Kitchen, Deep Fry, BBQ, Grill(Red/Black), LCD
$6.99
VEVOR Magnetic Stirrer,...image
VEVOR Magnetic Stirrer, 0-2000 RPM Stir Plate with Adjustable Speed Knob, 3000mL Plate Stirrer Kit, Stir Bar Included
$16.84

adamztop5

Stainless Steel Cam Lock QDs at Proflow Dynamics – 15%+10% Off w/Stacking Deals

homebrew cam lock

Proflow Dynamics has an extensive selection of homebrew gear, fittings and disconnects anchored by their lineup of Stainless Steel Camlock QDs.

More About ProFlow Dynamics

 

Camlock QDs at PFD!  I’ve used ProFlow Dynamics Quick Disconnects on my kettles, mash tun, pumps and tubing for a longtime.  They have worked great for me.  I put male connectors kettles, mash tuns and pumps and use female connectors for tubing.  Standardizing on this (or the opposite) means you can use tubing as jumpers and always have the availability to connect your gear.

These are made from Stainless Steel and are available in lots of configurations.  Those are classified by Type and Size.  Type may mean something in “commercial cam lock fitting circles”, but I was initially confused by this.  Types are akin to model numbers.  For example, Type A is Female NPT to Male Cam and Groove.

  • Generally Great Prices: ProFlow already has generally great prices.  Some of the best everyday prices for fittings, QDs, ball locks & more
  • 15% Off Coupon: BREW15% takes an additional 15% off their lineup of homebrewing gear.
  • Another 10% Off: Using any link in this post will save you another 10%!

Camlock QDs at PFD | ProFlow’s Homebrew Lineup – remember coupon code BREW15% + any link in this post for ANOTHER 10% off

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. pst:pfdcam

Blichmann Butterfly Valve Whirlpool Kit – on sale for $69.99, save $10

Blichmann Butterfly Valve Whirlpool Kit

Blichmann Butterfly Valve Whirlpool Kit via William’s Brewing

More Info

From the product description, check product page for current description, price and availability:

This Blichmann Whirlpool kit adds a whirlpool fitting to any brew pot (drilling required). With a whirlpool, you will get faster chilling with an immersion chiller. You need to drill a hole in your kettle, and a pump is required to make this work, please see the video below. This kit features a Tri-Clamp Butterfly valve.

 

  • Sales on Bichmann Engineering gear are rare.
  • This is on sale for $79.99 at William’s Brewing
  • Shipping is free or reasonably priced flat rate to addresses in the lower 48 states depending on your order size for most items.

Check sale or product page for current availability & pricing

Blichmann Butterfly Valve Whirlpool Kit

Check sale or product page for current availability & pricing

Price, promotions and availability can change quickly.  Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this post was published; however, they may differ from those you see when you visit the product page.  Check the product page for current price, description and availability

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

The SpinCycle Whirlpool Returns from Brew Hardware!

spincycle whirlpool return

Recirculating wort back into the kettle to whirlpool the wort makes for much faster cooling and will also make a concentrated pile of trub and hop particles in the center of the kettle bottom. This whirlpool port assembly installs high up on your kettle wall above the typical wort level and then extends down before curving to the side to force the recirculated liquid towards the sidewall.

The BrewHardware purpose-built unit called the Spin Cycle starts with a weldless bulkhead design with captured O-ring and extended male threads and has the 1/2″ drop tube fully welded in. The result is a compact way to whirlpool without the need to put a ball valve on the port (the port is meant to be installed well above the max liquid level). It includes the base unit with the welded drop tube, the captured high temp silicone oring, a thin SS washer and a 1/2″ NPS locknut to hold it all together.

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. prod:spincycle

Stainless Steel 1.5″ TC Weldless Bulkhead, Add TC to Your Gear

1.5" Tri-Clover Bulkhead Compression Fitting,Tri Clamp homebrew Weldless Bulkehad 304 Stainless Steel Homebrew Kettle Bulkhead

1.5″ Tri-Clover Bulkhead Compression Fitting,Tri Clamp homebrew Weldless Bulkehad 304 Stainless Steel Homebrew Kettle Bulkhead

From the product description, check product page for current description, price and availability:

  • Add a 1.5″ TC flange to virtually any vessel!Just drill a 32.5mm to 34mm(about 12.8″ ) hole and tighen the locknut with 2pcs Food grade gaskets.
  • 304 Stainless Construction and High heat compatible silicone gaskets.
  • The front of the flange does not have flats for a wrench. The easiest way to hold the flange for tightening is to clamp any other TC parts on with the gasket and clamp. Once tight, you can insert a long rod or screw driver into the hole of the wingnut.
  • Works on kettle as small as 12″ in diameter.

1.5″ Tri-Clover Bulkhead Compression Fitting,Tri Clamp homebrew Weldless Bulkehad 304 Stainless Steel Homebrew Kettle Bulkhead – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

Stainless Steel 1.5″ TC Weldless Bulkhead, Add TC to Your Gear

1.5" Tri-Clover Bulkhead Compression Fitting,Tri Clamp homebrew Weldless Bulkehad 304 Stainless Steel Homebrew Kettle Bulkhead

1.5″ Tri-Clover Bulkhead Compression Fitting,Tri Clamp homebrew Weldless Bulkehad 304 Stainless Steel Homebrew Kettle Bulkhead

From the product description, check product page for current description, price and availability:

  • Add a 1.5″ TC flange to virtually any vessel!Just drill a 32.5mm to 34mm(about 12.8″ ) hole and tighen the locknut with 2pcs Food grade gaskets.
  • 304 Stainless Construction and High heat compatible silicone gaskets.
  • The front of the flange does not have flats for a wrench. The easiest way to hold the flange for tightening is to clamp any other TC parts on with the gasket and clamp. Once tight, you can insert a long rod or screw driver into the hole of the wingnut.
  • Works on kettle as small as 12″ in diameter.

1.5″ Tri-Clover Bulkhead Compression Fitting,Tri Clamp homebrew Weldless Bulkehad 304 Stainless Steel Homebrew Kettle Bulkhead – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

Stainless Steel Cam Lock QDs at Proflow Dynamics – 15%+10% Off w/Stacking Deals

homebrew cam lock

Proflow Dynamics has an extensive selection of homebrew gear, fittings and disconnects anchored by their lineup of Stainless Steel Camlock QDs.

More About ProFlow Dynamics

 

Camlock QDs at PFD!  I’ve used ProFlow Dynamics Quick Disconnects on my kettles, mash tun, pumps and tubing for a longtime.  They have worked great for me.  I put male connectors kettles, mash tuns and pumps and use female connectors for tubing.  Standardizing on this (or the opposite) means you can use tubing as jumpers and always have the availability to connect your gear.

These are made from Stainless Steel and are available in lots of configurations.  Those are classified by Type and Size.  Type may mean something in “commercial cam lock fitting circles”, but I was initially confused by this.  Types are akin to model numbers.  For example, Type A is Female NPT to Male Cam and Groove.

  • Generally Great Prices: ProFlow already has generally great prices.  Some of the best everyday prices for fittings, QDs, ball locks & more
  • 15% Off Coupon: BREW15% takes an additional 15% off their lineup of homebrewing gear.
  • Another 10% Off: Using any link in this post will save you another 10%!

Camlock QDs at PFD | ProFlow’s Homebrew Lineup – remember coupon code BREW15% + any link in this post for ANOTHER 10% off


pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. pst:pfdcam

Add a Ball Valve to Your Kettle – Dernord Stainless Bulkhead + Ball Valve

DERNORD 1/2 Inch Weldless Ball Valve Stainless Steel 304 Bulkhead For Home Brew Kettle (1/2 NPT to 3/8 Barb Hose)

DERNORD 1/2 Inch Weldless Ball Valve Stainless Steel 304 Bulkhead For Home Brew Kettle (1/2 NPT to 3/8 Barb Hose)

More Info

From the product description, check product page for current description, price and availability:

  • 1/2 Inch Stainless Steel 2 piece Full Port Ball Valve
  • 3/8 Inch Stainless Steel Hose Barb
  • 1/2 Inch weldless bulkhead fitting fits 7/8 Inch kettle hole
  • WOG1000 working pressure rating (1000psi) to withstand high pressure and extreme temperatures
  • Rigorous testing standards prove minimal corrosion and rust along with easy cleaning

 

DERNORD 1/2 Inch Weldless Ball Valve Stainless Steel 304 Bulkhead For Home Brew Kettle (1/2 NPT to 3/8 Barb Hose) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

Add a Thermometer to Your Kettle, Mash Tun or HLT – 1/2″ NPT Stainless Thermometer – $9.99 + free ship eligible

Brewing Thermometer 1/2" NPT with 2.5" Probe

Brewing Thermometer 1/2″ NPT with 2.5″ Probe via Adventures in Homebrewing

More Info

From the product description, check product page for current description, price and availability:

Brewing Thermometer 1/2″ NPT with 2.5″ Probe

A stainless steel thermometer perferct for homebrewers. Features a 2.5″ probe, long enough for reliable accuracy without interfering with your mash paddle. Thermometer has a 3″ face with a temperature range from 40-220º F.

Threads: 1/2″ NPT
Probe: 2.5″
Temperature Range: 40 – 220 (Fahrenheit Only)
Dial Face: 3″

 

  • Adventures in Homebrewing has this on sale for just $9.99.
  • Stacks With Free Shipping!  Adventures in Homebrewing is offering free shipping on most orders of $55 or more with a few exclusions.
  • An easy filler item if you need help qualifying for free shipping… 4 lbs of PBW (a good deal at $23.99)

Brewing Thermometer 1/2″ NPT with 2.5″ Probe

Price, promotions and availability can change quickly.  Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this post was published; however, they may differ from those you see when you visit the product page.  Check the product page for current price, description and availability

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

aih