Category Archives: Projects

Anderson Metals 1/4″ Tee + “Cheapest” Spunding Build Option

Anderson Metals 56101-04 Brass Pipe Fitting, Barstock Tee, 1/4″ x 1/4″ x 1/4″ NPT Female Pipe

More Info
Highlighted Features
  • Tee with three openings for connecting and branching three pipes
  • Female NPT threads for connecting to male threaded pipes
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Operating temperature range of -65 to +250 degrees F
  • Meets ASTM B584 standards for quality assurance and ASME/ASMI B16 technical specifications
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
Learn More

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

Of course you could use these fittings in lots of different applications.  One possible application is a Spunding Valve build.  A Spunding Valve – See: Spunding Valve Resource Post – allows you to ferment under pressure, naturally and precisely carbonate in the keg, fix over-carbonated beers and more.  A similar fitting is featured in our “Cheapest” Spunding Valve Build Option

Anderson Metals 56101-04 Brass Pipe Fitting, Barstock Tee, 1/4″ x 1/4″ x 1/4″ NPT Female Pipe – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

 

tsrspund

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

6 x Neodymium Countersunk Magnets and Screws

6 x Neodymium Countersunk Magnets and Screws

More Info


Highlighted Features
  • 【STRONG POWERFUL】: These 1.26 inches Industrial Strength Round Base Magnets Made of Neodymium Rare Earth Magnetic Materia,Unbelievable Holding Power for the Size, Per Strong Rare Earth Magnet Can Up to 110 Pound Holding Power, Fit most of the uses in your life.
  • 【MAGNETS COATED】: Cup magnets has Ni+Cu+Ni Triple Layer Coated. The Best Coating Available, which Provides a Shiny and Rust Resistant Protection for the Magnets.
  • 【VERY STURABLE】：This Heavy Duty magnets is made of precision mechanical vehicles and these Magnets will not Break in Normal Use since the Magnets are Protected inside the Steel Cups which Greatly Increase the Longevity of the Magnets. smooth surface and one-off appearance Reduce your unnecessary troubles.
  • 【EXTENSIVE USE】：These neodymium cup magnets With Heavy Duty Countersunk Hole and Six free screws and Six Double Sided Adhensive Tapes can be used in a variety of life scenarios,Perfect for Handy Assembly for Home, Business and Schools! Holding, Lifting, Fishing, Closing, Retrieving, blackboard and refrigerator and Much More, Use it with our accessories which brings different gravitational experience to your life.
  • 【QUALITY GUARANTEED】: Our neodymium cup magnets Made under ISO 9001 Quality Systems. The Highest Quality Available! These cup magnets is very fragile, it is forbidden to collide with other metal objects (including another magnet), so be careful when you are trying separte them !If you have any questions Please contact us freely!
Learn More

 

These magnets are designed with a hole in the middle so that they can be mounted via the included magnets.  That may be helpful for an around the brewery project you’re looking to do.

Potential uses: Use as “keeper magnets” to retrieve and secure stir bars in yeast starters.  Use as part of a DIY stir plate build.  Use to help secure a DIY magnetic drip tray on your kegerator.  Assist with keeping signs, labels and notes in place.

Also: How To: Step by Step Making a Magnetic Drip Tray

LOVIMAG Neodymium Cup Magnets,110LBS Holding Force Strong Rare Earth Magnets with Heavy Duty Countersunk Hole and Double Sided Adhensive&Stainless Screws for Refrigerator Magnets,Office etc,Pack of 6 – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Set of 4 Heavy Duty Casters

Set of Four Heavy Duty Casters

More Info

From the product description, check product page for current description, price and availability:

Highlighted Features
  • IMPROVED VERSION - The workbench caster kit uses thicker steel, stronger screws, three holes on the top and the bottom of the plate, better wheels and bearings. Add rubber sleeve to protect contact part between human body and the caster, new design which is different from other Retractable Casters
  • SIMPLE OPERATION - This 4 retractable caster wheels work by simply pushing down on the pedals to raise your workbench off the floor. Once elevated you can move your bench, table or machine as desired, then lift up on the pedals to disengage and your workbench, table, cabinet, stand or machine sits firmly on the floor at its original working height.
  • DURABLE CONSTRUCTION - The heavy duty workbench wheels are constructed with durable solid steel and urethane wheels, which can smoothly move 360 degree. The wear-resistant urethane wheels is more steadier for heavy duty benches. Suitable for extensive daily use like workbe.
  • STRONG FOOT PEDAL - Each lift pedal is ribbed and textured to provide extra grip when foot pressure is applied. All the four urethane casters together can provide you a total weight capacity of 660 lbs. The workbench casters will work on workbenches, stands, tables, cabinets and lightweight machinery with flat bases.
  • Package Included - The workbench retractable casters include 4 workbench caster assemblies, all the necessary mounting hardware and instructions.
Learn More

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

Note from HBF: Your around-the-brewery project may need some casters..

SPACEKEEPER Workbench Casters kit 660 Lbs – 4 Heavy Duty Retractable Caster Designed for Workbenches Machinery & Tables – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Ketotek Dual Stage Temp Controller

KETOTEK Digital Dual Temperature Controller 120V Fahrenheit Thermostat 10A with 2 1.5m Waterproof Probes, Heating Cooling Temperature Control Switch Refrigerator Fan Heater

Ketotek Digital Temperature Controller

More Info

From the product description, check product page for current description, price and availability:

  • 【2 in 1】 This digital dual temperature controller can control 2 devices simultaneously with independent probe and output. Max Output: 10A 120Vac (10A Relay inside, please use Load current <5A). This temperature controller is direct output, you need to connect the heating/cooling devices to the output terminal first, and then power on the temperature controller.
  • 【Heating and cooling function】 This temperature controller 110v has two working modes: heating mode and cooling mode. Temperature control range: -58~248℉, Control accuracy:±1℉. It also supports temperature calibration ( -30~30℉), making the temperature control more accurate.
  • 【Easy to operate】 Set start temperature and stop temperature, this temperature controller will start to work as programmed. You can also set compressor delay time for delay start protection, set high temperature alarm value and low temeprature alarm value for high/low temperature protection.
  • 【Dual 1.5m NTC 10K probes waterproof】 This temperature controller features dual 1.5m NTC 10K probes made in TPE material and NTC 10K thermistor, which is professionally waterproof that can be placed in the water for a long time, longer service life than other metal probes.
  • 【More features you’ll love】This temperature controller can be reset as needed and has data storage function that all parameters setting can be saved after short circuit or power off. It can be used for aquarium, reptile, incubator, terrarium, freezer, refrigerator, fridge, homebrew, vivarium, fermentation, pet breeding, industrial equipment and other temperature-controlled system.

 

KETOTEK Digital Dual Temperature Controller 120V Fahrenheit Thermostat 10A with 2 1.5m Waterproof Probes, Heating Cooling Temperature Control Switch Refrigerator Fan Heater – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

210 GPH Submersible Utility Pump + Our Draft Line Cleaning Builds

210 GPH Submersible Pump

More Info

From the product description, check product page for current description, price and availability:

Highlighted Features
  • 【ADJUSTABLE】Designed with a adjusting knob, allowing to adjust the water flow rate.
  • 【STEADY STAY】Rubber suction cups can be a good fit in the glass surface, to help keep it stability.
  • 【CLEANABLE】No need any tools to detach it, easy to separate, easy to clean.
  • 【ULTRA-QUIET】Energy-saving low power, keep reliability and low noise operation, giving you quiet environment.
  • 【WIDELY USED】This submersible pump is perfect for aquariums, fountains, ponds and hydroponic systems, etc.
Learn More

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

Lyqily 210GPH Water Pump Ultra Quiet 15W Submersible Fountain Aquarium Fish Pond Hydroponic Pump with 5.2ft High Lift, 5.9ft Two-pin Plug Power Cord, 2 Nozzles （0.33“/0.51”  – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading →

TWO x Stainless Carbonation Cap for PET Bottles by Luckeg + Draft Line Cleaner Builds

 

PET Bottles Beer Carbonation Cap 2 PCS - Counter Pressure Bottle Filling with 5/16" Barb, Carbonation Beer Soda Water Brewed Beer, Fits Most Soft Drink PET Bottles

PET Bottles Beer Carbonation Cap 2 PCS – Counter Pressure Bottle Filling with 5/16″ Barb, Carbonation Beer Soda Water Brewed Beer, Fits Most Soft Drink PET Bottles by Luckeg

More Info


Highlighted Features
  • Heavy Duty Stainless Steel for Carbonation Cap (2 PCS), Perfect Polishing Surface,with two four Food Grade Silicone Seal Rings;
  • Unique Machined the Carbonation Cap, can fit Both Black Liquid Ball Lock Disconnect and Grey Gas Ball Lock Disconnect;
  • The Carbonation Cap can fits Most Soft Drink PET Bottles, easy to Counter Pressure Bottle Fill PET Bottles;
  • The Carbonation Cap can Carbonate Various Beverages, including Soda, Beer, Juice, Water or Clean Beer Line;
  • Quality Guarantee: Any Defective for Carbonation Cap, Money Back or Replacement free.
Learn More

 

Potential Uses:

  • PET Bottles as Growlers: These are generally intended to convert 1L and 2L bottles to growlers.  Fill up a 1L or 2L PET bottle with your favorite homebrew.  Put one of these on (purge the headspace by squeezing if you want to) and then pressurize for transport.  This should help to reduce oxygen pickup and maintain carbonation levels.
  • Fine tune or rapidly carbonate beer: You can also use this cap to rapidly carbonate beer.  Same process as for transport, just set your regulator to the proper pressure and shake or agitate the PET bottle to help introduce CO2.  Or hook it up to CO2 and let it sit in you kegerator.
  • Draft Line Cleaning Projects:  I have developed three draft line cleaning projects using similar SS Caps – Build A Recirculating Draft Line Cleaning Pump | Mark II Keg and Carboy Cleaner Draft Line Cleaning Pump Conversion | Building a Simple Ball Lock Draft Line Flushing Setup
  • Related Top Post: Fun with Carbonation Caps!

PET Bottles Beer Carbonation Cap 2 PCS – Counter Pressure Bottle Filling with 5/16″ Barb, Carbonation Beer Soda Water Brewed Beer, Fits Most Soft Drink PET Bottles – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading →

Measureman Digital Pressure Gauge + Spunding Valve Build

MEASUREMAN 2-1/2" Dial Size Digital Air Pressure Gauge with 1/4'' NPT Bottom Connector and Protective Boot, 0-200psi, Accuracy 1%, Battery Powered with LED Light

MEASUREMAN 2-1/2″ Dial Size Digital Air Pressure Gauge with 1/4” NPT Bottom Connector and Protective Boot, 0-200psi, Accuracy 1%, Battery Powered with LED Light

More Info

From the product description, check product page for current description, price and availability:

  • For pneumatic, air pressure measuring, typical for tire gauge, tire inflator, air pressure system etc.
  • Dial size: 2-1/2″, green backlight
  • Plastic case and protective boot,
  • Solid brass connection, 1/4″NPT male
  • 0-200psi, bar, kg/cm2, kpa, Accuracy:1%

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

A possible homebrew application for this is to use it as part of a Spunding Valve Build.   A Spunding Valve allows you to ferment under pressure, naturally and precisely carbonate in the keg, fix over-carbonated beers and lots more. See: [Build a Spunding Valve].

Note that this has a maximum capacity of 200 PSI. That’s going to exceed the capacity for most homebrewing components. Make sure all of your equipment is rated for your desired pressure.

MEASUREMAN 2-1/2″ Dial Size Digital Air Pressure Gauge with 1/4” NPT Bottom Connector and Protective Boot, 0-200psi, Accuracy 1%, Battery Powered with LED Light – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

tsrspund

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Anderson Metals 1/4″ Tee + “Cheapest” Spunding Build Option

Anderson Metals 56101-04 Brass Pipe Fitting, Barstock Tee, 1/4″ x 1/4″ x 1/4″ NPT Female Pipe

More Info


Highlighted Features
  • Tee with three openings for connecting and branching three pipes
  • Female NPT threads for connecting to male threaded pipes
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Operating temperature range of -65 to +250 degrees F
  • Meets ASTM B584 standards for quality assurance and ASME/ASMI B16 technical specifications
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
Learn More

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

Of course you could use these fittings in lots of different applications.  One possible application is a Spunding Valve build.  A Spunding Valve – See: Spunding Valve Resource Post – allows you to ferment under pressure, naturally and precisely carbonate in the keg, fix over-carbonated beers and more.  A similar fitting is featured in our “Cheapest” Spunding Valve Build Option

Anderson Metals 56101-04 Brass Pipe Fitting, Barstock Tee, 1/4″ x 1/4″ x 1/4″ NPT Female Pipe – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

tsrspund

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

STC-1000 Dual Relay Digital Temperature Controller

STC-1000 Digital Temp Controller

More Info



 

XINGYHENG STC-1000 DC 110V-220V 10A Microcomputer Digital Display Temperature Controller Thermostat Control Switch 2 Relay Output Cooling Heating  and NTC 10K Thermistor Sensors Temperature Probe – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Inkbird Itc-308 – [Review]| Yeast Starters & Fermentation | Kegerator Tips & Gear | Inkbird Temperature Controller Deals and Reviews!

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

400 GPH Submersible Pump, Brushless Motor, Stainless Impeller Shaft + Our Draft Line Cleaning Builds

Winkeyes 400GPH Pump

More Info

From the product description, check product page for current description, price and availability:

Highlighted Features
  • USE BRUSHLESS MOTOR, run smoothly, low noise, long working life compared with brush motor, keep it quiet and not scare the fish.
  • ANTI DRY BURNING DESGIN, the fish pong pump can withstand 48 hours dry burning. So no need to worry about there is not enough water in your fish tank when you go on a short trip.
  • STRONG POWER HIGH LIFT, this fountain pump max lift height: 6.9ft. 25W high efficiency motor for energy saving. Lift height is a max height the water goes up, after connecting the water pipe to the nozzle (Make sure the joint sealed securely and tightly)
  • STAINLESS STEEL PUMP IMPELLER SHAFT, corrosion resistance, strong driving, long working life, so JAKIELAX submersible pump also fit for sea water
  • SUCTION CUP 2 NOZZLES ADJUSTABLE FLOW RATE, 4 individual powerful suction cups that hold the pump securely on the right side of aquarium, vertically or horizontally. water change pump has 2 nozzles for optional
Learn More

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

Winkeyes 400GPH Water Pump with 48 Hours Anti Dry Burning, Ultra Quiet 25W Submersible Fountain Aquarium Fish Pond Hydroponic Pump with 6.9ft High Lift, 5.9ft Power Cord, 2 Nozzles – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading →

For Your Brewery Project… Gardner Bender Toggle Switches

Gardner Bender Electrical Toggle Switch

More Info


Highlighted Features
  • Perfect for industrial equipment or emergency lighting
  • Specifications: 10 A 277 V AC / 20 A 125 V AC
  • 75°C max. temperature rating
  • Terminal Type: 6 inch. wire leads, 18 AWG Wire
  • Standard nut size, 15/32 - 32 inch.
Learn More

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

Gardner Bender GSW-125 Electrical Toggle Switch, SPST, ON-OFF, 6 A/125V AC, 6 inch Wire Terminal  – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

For Your Brewery Project… Gardner Bender Toggle Switches

Gardner Bender Electrical Toggle Switch

More Info


Highlighted Features
  • Perfect for industrial equipment or emergency lighting
  • Specifications: 10 A 277 V AC / 20 A 125 V AC
  • 75°C max. temperature rating
  • Terminal Type: Screw
  • Standard nut size, 15/32 - 32 inch.
Learn More

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

Gardner Bender GSW-124 Electrical Toggle Switch, SPST, ON-OFF, 6 A/120V AC, Screw Terminal – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Kegland Carbonation Ball Lock Cap Tee Fitting – on sale for $3.59 + Related Reviews

Carbonation Ball Lock Cap Tee Fitting KG501

Carbonation Ball Lock Cap Tee Fitting via MoreBeer

More Info

From the product description, check product page for current description, price and availability:

This simple tee fitting allows you to turn a PET growler or repurposed soda bottle into a portable, pressurizable growler. PCO 1881 threading on all ends—the most common threading for plastic soda bottles. One end is female threaded to attach to your vessel, and the other ends are male threaded in order to accept two Carbonation Cap Ball Lock Adapters. A small length of 3/16″ ID tubing can be attached to your bev-out cap to function as the dip tube. If you’re using EVABarrier tubing, simply connect using a Duotight reducer.

Tee fitting only. Does not include Carbonation Caps or PET growler.

KegLand Part Number: KL14830

 

Carbonation Ball Lock Cap Tee Fitting KG501

Note that the pictured bottle and caps are not included.  You’ll need two of these… Carbonation and Line Cleaning Ball Lock Cap – Plastic FE133

Related…


duotightreview

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

1/4-Inch MFL by 1/4-Inch MPT Stainless Steel Fitting + Spunding Build – How & Why

1/4″ MFL to 1/4″ MPT Fitting

Highlighted Features
  • Stainless Steel Construction
  • 1/4" MFL ( Male Flare Thread)
Learn More

This fitting could be used for a lot of things.  One potential use would be as part of a Spunding Valve Build.   A Spunding Valve allows you to ferment under pressure, naturally and precisely carbonate in the keg, fix over-carbonated beers and more.  This fitting would be part of a style 2 build.

1/4
1/4" MFL to 1/4" MPT
$8.20

tsrspund

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Stainless Steel Carbonation Cap for PET Bottles

Yosoo Stainless Steel CarbonationHome Brew Beer Fast Soda Made Counter Pressure Bottle Filling Fit Most Soft Drink PET Bottles

Yosoo Stainless Steel Carbonation Cap Home Brew Beer Fast Soda Made Counter Pressure Bottle Filling Fit Most Soft Drink PET Bottles

More Info


Highlighted Features
  • 【Stainless Steel】Made of stainless steel material, more solid and last longer, making it easier to carbonate your beverages!
  • 【Method of 】With this you can simply fill an old PET bottle with cold liquid of your choice and carbonate by connecting your gas ball lock disconnect.
  • 【Making Soft Drinks】With it, you can make your own soda water, carbonate beer, or even make your own soft drinks.
  • 【for Most PET Bottles】It is designed to fit onto most soft drink PET bottles, inject CO2 into the bottle, creating carbonation.
  • 【Add and Maintain Carbonation】The carbonation is highly effective method to add and maintain carbonation in beverages for extended periods of time.
Learn More

 

Applications:

  • PET Bottles as Growlers: These are generally intended to convert 1L and 2L bottles to growlers.  Fill up a 1L or 2L PET bottle with your favorite homebrew.  Put one of these on (purge the headspace by squeezing if you want to) and then pressurize for transport.  This should help to reduce oxygen pickup and maintain carbonation levels.
  • Fine tune or rapidly carbonate beer: You can also use this cap to rapidly carbonate beer.  Same process as for transport, just set your regulator to the proper pressure and shake or agitate the PET bottle to help introduce CO2.  Or hook it up to CO2 and let it sit in you kegerator.
  • Draft Line Cleaning Projects:  I have developed three draft line cleaning projects using similar SS Caps – Build A Recirculating Draft Line Cleaning Pump | Mark II Keg and Carboy Cleaner Draft Line Cleaning Pump Conversion | Building a Simple Ball Lock Draft Line Flushing Setup
  • Related Top Post: Fun with Carbonation Caps!

Yosoo Stainless Steel CarbonationHome Brew Beer Fast Soda Made Counter Pressure Bottle Filling Fit Most Soft Drink PET Bottles – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading →

2 Pack USB Powered Stepless Speed Regulators [Stir Plate Project, Kegerator Circulation] – $6.99 + free prime ship

NOYITO 5V USB Fan Stepless Speed Controller Regulator with Switch Speed Module DC 4-12V to 2.5-8V 5W （Pack of 2）

NOYITO 5V USB Fan Stepless Speed Controller Regulator with Switch Speed Module DC 4-12V to 2.5-8V 5W （Pack of 2）

More Info

From the product description, check product page for current description, price and availability:

  • The stepless speed regulator output voltage range smoothly changes between 3V-8V, so the fan wind speed can be adjusted, comfort greatly increased!
  • Turn the knob clockwise to increase the air volume. Turning it counterclockwise will make the air volume gentler and the knob has a switch function!
  • Usage: very simple! Insert the governor into the mobile phone charger or charging treasure, then insert the fan USB plug into the USB port of the governor, and then adjust the large volume of small air volume by turning the adjusting knob.
  • Input Power Supply Range: DC 4V to 12V ( USB port). Output range: DC 3V-8V (Not fit for 12V USB fan).
  • Rated power: 5W （Do not overload.）【Please check the second image on the left that is the use connection instructions.】

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

12/23 1 AM Central: These are selling for just $6.99. Shipping is also free to many US addresses with Prime Membership [Try Prime for Free] or a qualifying order.  Prices and availability can change quickly.  Check product page for current info – More About Prices

NOYITO 5V USB Fan Stepless Speed Controller Regulator with Switch Speed Module DC 4-12V to 2.5-8V 5W （Pack of 2） affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

12 x Neodymium Magnets + Double-Sided Adhesive

MIKEDE Strong Neodymium Disc Magnets, 12 Pack Powerful Permanent Rare Earth Magnets with Double-Sided Adhesive for Fridge, DIY, Scientific, Craft,and Office Magnets, 1.26 inch D x 1/8 inch H

MIKEDE Strong Neodymium Disc Magnets, 12 Pack Powerful Permanent Rare Earth Magnets with Double-Sided Adhesive for Fridge, DIY, Scientific, Craft,and Office Magnets, 1.26 inch D x 1/8 inch H

More Info

From the product description, check product page for current description, price and availability:

  • STRONGER THAN THE COMPETITION – Made from the world’s strongest magnetic element, our pure neodymium disc magnets are incredibly powerful. This set of premium rare earth magnets can handle your project or task.
  • UNMATCHED QUALITY – Your safety is our highest priority. Chipped, broken magnetic shards are dangerous. We use thicker, industrial grade, durable N45 grade neodymium rather than extremely brittle N52 used by our competitors.
  • PREMIUM QUALITY COATING – You will love the smooth and shiny finish. Our magnets are protected with a corrosion resistant Ni-Cu-Ni (Nickel-Copper-Nickel) coating to create a high quality silver look that doesn’t rust or scratch.
  • UNLIMITED USES – No matter your application, our powerful magnets can handle the job. These thin magnetic discs work great as strong refrigerator magnets, arts and crafts, DIY projects, hanging spice jars, pictures, whiteboards, tools in the garage, or science classroom at school.

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

Potential uses: Use as “keeper magnets” to retrieve and secure stir bars in yeast starters.  Use as part of a DIY stir plate build.  Use to help secure a DIY magnetic drip tray on your kegerator.  Assist with keeping signs, labels and notes in place.

Also: How To: Step by Step Making a Magnetic Drip Tray

MIKEDE Strong Neodymium Disc Magnets, 12 Pack Powerful Permanent Rare Earth Magnets with Double-Sided Adhesive for Fridge, DIY, Scientific, Craft,and Office Magnets, 1.26 inch D x 1/8 inch H – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

400 GPH Submersible Pump, Brushless Motor, Stainless Impeller Shaft + Recirculating Draft Line Cleaning Build

Winkeyes 400GPH Pump

More Info

From the product description, check product page for current description, price and availability:

Highlighted Features
  • USE BRUSHLESS MOTOR, run smoothly, low noise, long working life compared with brush motor, keep it quiet and not scare the fish.
  • ANTI DRY BURNING DESGIN, the fish pong pump can withstand 48 hours dry burning. So no need to worry about there is not enough water in your fish tank when you go on a short trip.
  • STRONG POWER HIGH LIFT, this fountain pump max lift height: 6.9ft. 25W high efficiency motor for energy saving. Lift height is a max height the water goes up, after connecting the water pipe to the nozzle (Make sure the joint sealed securely and tightly)
  • STAINLESS STEEL PUMP IMPELLER SHAFT, corrosion resistance, strong driving, long working life, so JAKIELAX submersible pump also fit for sea water
  • SUCTION CUP 2 NOZZLES ADJUSTABLE FLOW RATE, 4 individual powerful suction cups that hold the pump securely on the right side of aquarium, vertically or horizontally. water change pump has 2 nozzles for optional
Learn More

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

Winkeyes 400GPH Water Pump with 48 Hours Anti Dry Burning, Ultra Quiet 25W Submersible Fountain Aquarium Fish Pond Hydroponic Pump with 6.9ft High Lift, 5.9ft Power Cord, 2 Nozzles

– affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading →

Measureman Digital Pressure Gauge + Spunding Valve Build

MEASUREMAN 2-1/2" Dial Size Digital Air Pressure Gauge with 1/4'' NPT Bottom Connector and Protective Boot, 0-200psi, Accuracy 1%, Battery Powered with LED Light

MEASUREMAN 2-1/2″ Dial Size Digital Air Pressure Gauge with 1/4” NPT Bottom Connector and Protective Boot, 0-200psi, Accuracy 1%, Battery Powered with LED Light

More Info

From the product description, check product page for current description, price and availability:

  • For pneumatic, air pressure measuring, typical for tire gauge, tire inflator, air pressure system etc.
  • Dial size: 2-1/2″, green backlight
  • Plastic case and protective boot,
  • Solid brass connection, 1/4″NPT male
  • 0-200psi, bar, kg/cm2, kpa, Accuracy:1%

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

A possible homebrew application for this is to use it as part of a Spunding Valve Build.   A Spunding Valve allows you to ferment under pressure, naturally and precisely carbonate in the keg, fix over-carbonated beers and lots more. See: [Build a Spunding Valve].

Note that this has a maximum capacity of 200 PSI. That’s going to exceed the capacity for most homebrewing components. Make sure all of your equipment is rated for your desired pressure.

MEASUREMAN 2-1/2″ Dial Size Digital Air Pressure Gauge with 1/4” NPT Bottom Connector and Protective Boot, 0-200psi, Accuracy 1%, Battery Powered with LED Light – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

tsrspund

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

VIVOSUN 400 GPH Utility Pump + Draft Line Cleaning Builds

VIVOSUN 400GPH Submersible Pump(1500L/H, 15W), Ultra Quiet Water Pump with 5.3ft High Lift, Fountain Pump with 5ft Power Cord, 2 Nozzles for Fish Tank, Pond, Aquarium, Statuary, Hydroponics

VIVOSUN 400GPH Submersible Pump(1500L/H, 15W), Ultra Quiet Water Pump with 5.3ft High Lift, Fountain Pump with 5ft Power Cord, 2 Nozzles

More Info


Highlighted Features
  • Specifications: Dimensions: 4.1'' x 2.52'' x 2.95''; The 5-ft. long power cord offers convenient installation; Max. Flow Rate: 400 GPH (1500L/H); Max. Lift Height: up to 5.3 ft.; Wattage: 15W; Voltage: 110-120V
  • Detachable & Cleanable: This compact water pump is easy to hide or disguise and no additional tools are needed for disassembly and cleaning
  • A Variety of Outlet Positions: Place the pump flat and choose whichever outlet position suits your needs
  • Wide Range of Applications: High performance energy-efficient pump designed for use in ponds, fountains, waterfalls, hydroponic systems, irrigation systems and other water features
  • Warranty: Super durable & reusable, this pump comes with a 2-Year warranty; If you have any problems with the item you receive, please contact us without hesitation
Learn More

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

VIVOSUN 400GPH Submersible Pump(1500L/H, 15W), Ultra Quiet Water Pump with 5.3ft High Lift, Fountain Pump with 5ft Power Cord, 2 Nozzles for Fish Tank, Pond, Aquarium, Statuary, Hydroponics – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading →