Category Archives: Projects

VIVOSUN 400 GPH Utility Pump + Draft Line Cleaning Builds

DC Motor Stepless Speed Controller [Stir Plate Project, Kegerator Circulation]

PWM Motor Speed Controller DC 6V 9V 12V 24V 36V 48V 60V Pulse Width Modulation Regulator 10A 400W Stepless Variable Spee Forward and Reverse Switch DC Speed Regulation

PWM Motor Speed Controller DC 6V 9V 12V 24V 36V 48V 60V Pulse Width Modulation Regulator 10A 400W Stepless Variable Spee Forward and Reverse Switch DC Speed Regulation

More Info

From the product description, check product page for current description, price and availability:

  • ★PWM DC Motor Speed Controller, Work Voltage: 9V-60V; Output Current: 0A-10A; Continuous Power:400W (max)
  • ★Speed Range: 0%-100%; Control Frequency: 21KHZ, adopting current adjusting, PWM to control light and speed.
  • ★Linear regulate motor speed by potentionmeter, support forward / reverse rotation regulation.
  • ★Adopting advanced technology, high efficient, large torque, low heat etc. performance.
  • ★Can be widely used for DC brush motor speed controlling, light dimming in DC circuit, PWM can take full advantage of power energy.

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

PWM Motor Speed Controller DC 6V 9V 12V 24V 36V 48V 60V Pulse Width Modulation Regulator 10A 400W Stepless Variable Spee Forward and Reverse Switch DC Speed Regulation affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Measureman Digital Pressure Gauge + Spunding Valve Build

MEASUREMAN 2-1/2" Dial Size Digital Air Pressure Gauge with 1/4'' NPT Bottom Connector and Protective Boot, 0-200psi, Accuracy 1%, Battery Powered with LED Light

MEASUREMAN 2-1/2″ Dial Size Digital Air Pressure Gauge with 1/4” NPT Bottom Connector and Protective Boot, 0-200psi, Accuracy 1%, Battery Powered with LED Light

More Info

From the product description, check product page for current description, price and availability:

  • For pneumatic, air pressure measuring, typical for tire gauge, tire inflator, air pressure system etc.
  • Dial size: 2-1/2″, green backlight
  • Plastic case and protective boot,
  • Solid brass connection, 1/4″NPT male
  • 0-200psi, bar, kg/cm2, kpa, Accuracy:1%

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

A possible homebrew application for this is to use it as part of a Spunding Valve Build.   A Spunding Valve allows you to ferment under pressure, naturally and precisely carbonate in the keg, fix over-carbonated beers and lots more. See: [Build a Spunding Valve].

Note that this has a maximum capacity of 200 PSI. That’s going to exceed the capacity for most homebrewing components. Make sure all of your equipment is rated for your desired pressure.

MEASUREMAN 2-1/2″ Dial Size Digital Air Pressure Gauge with 1/4” NPT Bottom Connector and Protective Boot, 0-200psi, Accuracy 1%, Battery Powered with LED Light – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

tsrspund

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Lyqily 740GPH Submersible Water Pump, Draft Line Cleaning, Potential Mark II Replacement & More

Lyqily 740GPH Water Pump Ultra Quiet 55W Submersible Fountain Aquarium Fish Pond Hydroponic Pump with 8.5ft High Lift, 5.9ft Three-pin Plug Power Cord, 3 Nozzles(0.51"/0.63"/0.75")

Lyqily 740GPH Submersible Water Pump Ultra Quiet 55W

More Info

From the product description, check product page for current description, price and availability:

Product Name: Submersible Pump

Ultra-quiet Mini Submersible Pump Compact Multifunctional Detachable

SPECIFICATION
Max Flow Rate: 2800L/H
Max Lift Height: 2.6m
Power: 55W
Voltage: 110-120V/60Hz
Length of Power Cord: 1.8m
Dimension: 105mm x 66mm x 88mm

OPERATE
Neither clog up the entrance of the pump nor suck any dirty liquids.
Should the pump be used on a dirty surface, lift it a bit so that a contact with debris is avoided.
To lower the flood of water, use the control lever located on the side of the pump.
Immerse the pump into the water before connecting it to the plug.
At the very beginning, the pump may not work out properly as it might have some air inside,
So just take it off the water and immerse it again: it will surely work out.

PRECAUTIONS
Always disconnect the plug before handling the pump.
Do not use it without water.
Do not grab it using its cable.
Use only cold water.
Use the pump only if completely immersed.

UPKEEP
Remove the frontal part of the pump and the fan and wash them under flowing water.
Do not remove the drum of the pump.
Remove the frontal part and check that the fan runs the proper way.
Check the pump monthly and make sure the pump and its exit are free of obstruction.

 

Potential Uses:

  • I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly
  • As part of a recirculating wort chiller setup (on the chilled water side).

This looks very similar to the pump featured in Sourcing a Replacement Pump for Mark’s Keg and Carboy Washer – the only thing I’m seeing that’s different is a 3 prong cord vs 2 prong

Lyqily 740GPH Water Pump Ultra Quiet 55W Submersible Fountain Aquarium Fish Pond Hydroponic Pump with 8.5ft High Lift, 5.9ft Three-pin Plug Power Cord, 3 Nozzles(0.51″/0.63″/0.75″) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link



This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

6 x Neodymium Magnets + Double-Sided Adhesive

MIKEDE Neodymium Rare Earth Disc Magnets, Strong Permanent Magnets with Double Sided Adhesive Ideal for Fridge, DIY, Building, Scientific, Craft, etc, 1.26 inch D x 1/8 inch H - 6 Packs

MIKEDE Neodymium Rare Earth Disc Magnets, Strong Permanent Magnets with Double Sided Adhesive Ideal for Fridge, DIY, Building, Scientific, Craft, etc, 1.26 inch D x 1/8 inch H – 6 Packs

More Info

From the product description, check product page for current description, price and availability:

  • STRONGER THAN THE COMPETITION – Made from the strong magnetic element, our pure neodymium disc magnets are incredibly powerful. This set of premium rare earth magnets can handle your project or task.
  • UNMATCHED QUALITY – Your safety is our highest priority. Chipped, broken magnetic shards are dangerous. We use thicker, industrial grade, durable N45 grade neodymium rather than extremely brittle N52 used by our competitors.
  • PREMIUM QUALITY COATING – You will love the smooth and shiny finish. Our magnets are protected with a corrosion resistant Ni-Cu-Ni (Nickel-Copper-Nickel) coating to create a high quality silver look that doesn’t rust or scratch.
  • UNLIMITED USES – No matter your application, our powerful magnets can handle the job. These thin magnetic discs work great as strong refrigerator magnets, arts and crafts, DIY projects, hanging spice jars, pictures, whiteboards, tools in the garage, or science classroom at school.

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

Potential uses: Use as “keeper magnets” to retrieve and secure stir bars in yeast starters.  Use as part of a DIY stir plate build.  Use to help secure a DIY magnetic drip tray on your kegerator.  Assist with keeping signs, labels and notes in place.

Also: How To: Step by Step Making a Magnetic Drip Tray

MIKEDE Neodymium Rare Earth Disc Magnets, Strong Permanent Magnets with Double Sided Adhesive Ideal for Fridge, DIY, Building, Scientific, Craft, etc, 1.26 inch D x 1/8 inch H – 6 Packs – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

DC Motor Stepless Speed Controller [Stir Plate Project, Kegerator Circulation]

PWM Motor Speed Controller DC 6V 9V 12V 24V 36V 48V 60V Pulse Width Modulation Regulator 10A 400W Stepless Variable Spee Forward and Reverse Switch DC Speed Regulation

PWM Motor Speed Controller DC 6V 9V 12V 24V 36V 48V 60V Pulse Width Modulation Regulator 10A 400W Stepless Variable Spee Forward and Reverse Switch DC Speed Regulation

More Info

From the product description, check product page for current description, price and availability:

  • ★PWM DC Motor Speed Controller, Work Voltage: 9V-60V; Output Current: 0A-10A; Continuous Power:400W (max)
  • ★Speed Range: 0%-100%; Control Frequency: 21KHZ, adopting current adjusting, PWM to control light and speed.
  • ★Linear regulate motor speed by potentionmeter, support forward / reverse rotation regulation.
  • ★Adopting advanced technology, high efficient, large torque, low heat etc. performance.
  • ★Can be widely used for DC brush motor speed controlling, light dimming in DC circuit, PWM can take full advantage of power energy.

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

PWM Motor Speed Controller DC 6V 9V 12V 24V 36V 48V 60V Pulse Width Modulation Regulator 10A 400W Stepless Variable Spee Forward and Reverse Switch DC Speed Regulation affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

12 x Neodymium Magnets + Double-Sided Adhesive

MIKEDE Strong Neodymium Disc Magnets, 12 Pack Powerful Permanent Rare Earth Magnets with Double-Sided Adhesive for Fridge, DIY, Scientific, Craft,and Office Magnets, 1.26 inch D x 1/8 inch H

MIKEDE Strong Neodymium Disc Magnets, 12 Pack Powerful Permanent Rare Earth Magnets with Double-Sided Adhesive for Fridge, DIY, Scientific, Craft,and Office Magnets, 1.26 inch D x 1/8 inch H

More Info

From the product description, check product page for current description, price and availability:

  • STRONGER THAN THE COMPETITION – Made from the world’s strongest magnetic element, our pure neodymium disc magnets are incredibly powerful. This set of premium rare earth magnets can handle your project or task.
  • UNMATCHED QUALITY – Your safety is our highest priority. Chipped, broken magnetic shards are dangerous. We use thicker, industrial grade, durable N45 grade neodymium rather than extremely brittle N52 used by our competitors.
  • PREMIUM QUALITY COATING – You will love the smooth and shiny finish. Our magnets are protected with a corrosion resistant Ni-Cu-Ni (Nickel-Copper-Nickel) coating to create a high quality silver look that doesn’t rust or scratch.
  • UNLIMITED USES – No matter your application, our powerful magnets can handle the job. These thin magnetic discs work great as strong refrigerator magnets, arts and crafts, DIY projects, hanging spice jars, pictures, whiteboards, tools in the garage, or science classroom at school.

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

Potential uses: Use as “keeper magnets” to retrieve and secure stir bars in yeast starters.  Use as part of a DIY stir plate build.  Use to help secure a DIY magnetic drip tray on your kegerator.  Assist with keeping signs, labels and notes in place.

Also: How To: Step by Step Making a Magnetic Drip Tray

MIKEDE Strong Neodymium Disc Magnets, 12 Pack Powerful Permanent Rare Earth Magnets with Double-Sided Adhesive for Fridge, DIY, Scientific, Craft,and Office Magnets, 1.26 inch D x 1/8 inch H – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

ARCTIC F12-120 mm Case Fan [Stir Plate Project, Kegerator Circulation]

ARCTIC F12-120 mm Standard Low Noise Case Fan - Fluid Dynamic Bearing - Innovative Design

ARCTIC F12 – 120 mm Standard Case Fan, very quite motor, Computer, Push- or Pull Configuration, Fan Speed: 1350 RPM

More Info

From the product description, check product page for current description, price and availability:

  • INNOVATIVE DESIGN: Design of fan blades improves airflow and facilitates efficient ventilation, impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure
  • TWO WAY INSTALLATION: Blow warm air out of the case, draw cool air into your case
  • LONG SERVICE LIFE: The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage, thus this bearing is as quiet as a sleeve bearing but comes with a higher service life
  • TECHNICAL DATA: Fan speed: 1350 RPM, Airflow: 53 CFM/90;1 m³/h (@ 1350 RPM), Noise Level: 0;3 Sone (@ 1350 RPM), Pin: 3-pin

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

ARCTIC F12 – 120 mm Standard Case Fan, very quite motor, Computer, Push- or Pull Configuration, Fan Speed: 1350 RPM affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Set of 4 Heavy Duty Swivel Casters

Swivel Caster Wheels Rubber Base with Top Plate & Bearing Heavy Duty with Total Lock Brake Pack of 4 Black by Online Best Service (2" With Brake)

Set of Four Heavy Duty Casters

More Info

From the product description, check product page for current description, price and availability:

  • HEAVY DUTY CASTER WHEELS: Double ball bearing for each wheel, moving smooth, the load capacity for each casters is more than 150lbs. Plate Size: 1.9″ (49mm) x 2.7″ (70mm). Hole center to hole center: 1.3″ (35mm) x 2″ (52mm). Mounting hole dimensions: 0.33″ (8.4mm) x 0.44″ (11mm)). Overall Height: 2.7″ (70mm). Caster Wheel Diameter: 2″ (50mm). Caster Wheel Width: 0.9″ (23mm). Caster Wheel Material: Polyurethane. Caster Wheel Color: All Black.
  • CASTERS ALL WITH LOCK BRAKE:The brake can stop the wheel moving and stop the top plate swiveling simultaneously, dual lock is effective to prevent the device from moving, ensuring the safety of people and goods at any time and at any angle.
  • SWIVEL CASTERS ROTATE 360 DEGREE:Transform the mating equipment to any directions in the most efficient and labor-saving way, our caster wheels are the best accessories for the heavy furniture, desktop, table, cabinet or trolley.
  • QUIET RUBBER BASE WHEELS:Silent and no noise rolling, so don’t worry to disturb others when moving your devices.
  • WIDELY USED:Can be used in both industrial and residential applications, for coffee table, plant stands, bookshelves, shoe bins, toy bins, shopping carts, workbench, warehouse or supermarket shelves, they can be installed to most devices if you want.

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

Note from HBF: Your around-the-brewery project may need some casters.

Swivel Caster Wheels Rubber Base with Top Plate & Bearing Heavy Duty with Total Lock Brake Pack of 4 Black by Online Best Service (2″ With Brake) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Primefit CR1401G Replacement Air Regulator + Spunding Valve Build

Primefit CR1401G Replacement Air Regulator with steel-Protected Gauge, 1/4" Npt

Primefit CR1401G Replacement Air Regulator with steel-Protected Gauge, 1/4″ Npt

More Info

From the product description, check product page for current description, price and availability:

  • Air regulator for precisely regulating and maintaining constant air pressure
  • Accurate downstream air pressure regulation between 1 and 160-psi
  • High impact composite regulator knob and steel protected gauge
  • 60-Scfm at 100-PSI with 1/4-inch NPT ports

 

A potential homebrew application for this is to use it as part of a Spunding Valve Build.   A Spunding Valve allows you to ferment under pressure, naturally and precisely carbonate in the keg, fix over-carbonated beers and lots more. See: Build a Spunding Valve for more on Spunding Valves.

Most of the builds detailed in our Spunding Resource Post consist of a PRV Valve + tee + gauge + connection option.  Generally four parts in total.  The CR1401G replaces two parts, both the tee and gauge.  See: Spunding Valve Build: Using Primefit CR1401G Replacement Air Regulator for more details

Primefit CR1401G Replacement Air Regulator with steel-Protected Gauge, 1/4″ Npt – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Related Resources!

Homebrew Finds is Spunding Central!  Check our related resources and more detailed builds

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

Lyqily 740GPH Submersible Water Pump, Draft Line Cleaning, Potential Mark II Replacement & More

Lyqily 740GPH Water Pump Ultra Quiet 55W Submersible Fountain Aquarium Fish Pond Hydroponic Pump with 8.5ft High Lift, 5.9ft Three-pin Plug Power Cord, 3 Nozzles(0.51"/0.63"/0.75")

Lyqily 740GPH Submersible Water Pump Ultra Quiet 55W

More Info

From the product description, check product page for current description, price and availability:

Product Name: Submersible Pump

Ultra-quiet Mini Submersible Pump Compact Multifunctional Detachable

SPECIFICATION
Max Flow Rate: 2800L/H
Max Lift Height: 2.6m
Power: 55W
Voltage: 110-120V/60Hz
Length of Power Cord: 1.8m
Dimension: 105mm x 66mm x 88mm

OPERATE
Neither clog up the entrance of the pump nor suck any dirty liquids.
Should the pump be used on a dirty surface, lift it a bit so that a contact with debris is avoided.
To lower the flood of water, use the control lever located on the side of the pump.
Immerse the pump into the water before connecting it to the plug.
At the very beginning, the pump may not work out properly as it might have some air inside,
So just take it off the water and immerse it again: it will surely work out.

PRECAUTIONS
Always disconnect the plug before handling the pump.
Do not use it without water.
Do not grab it using its cable.
Use only cold water.
Use the pump only if completely immersed.

UPKEEP
Remove the frontal part of the pump and the fan and wash them under flowing water.
Do not remove the drum of the pump.
Remove the frontal part and check that the fan runs the proper way.
Check the pump monthly and make sure the pump and its exit are free of obstruction.

 

Potential Uses:

  • I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly
  • As part of a recirculating wort chiller setup (on the chilled water side).

This looks very similar to the pump featured in Sourcing a Replacement Pump for Mark’s Keg and Carboy Washer – the only thing I’m seeing that’s different is a 3 prong cord vs 2 prong

Lyqily 740GPH Water Pump Ultra Quiet 55W Submersible Fountain Aquarium Fish Pond Hydroponic Pump with 8.5ft High Lift, 5.9ft Three-pin Plug Power Cord, 3 Nozzles(0.51″/0.63″/0.75″) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link



This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

Kingwin 120 mm Case Fan [Stir Plate Project, Kegerator Circulation]

Kingwin 120mm CF-012LB Silent Fan, For Computer Cases, CPU Coolers, Long Life Bearing, Quiet Efficient Cooling, and Provide Excellent Ventilation for PC Cases-[Black]

Kingwin 120mm CF-012LB Silent Fan, For Computer Cases, CPU Coolers, Long Life Bearing, Quiet Efficient Cooling, and Provide Excellent Ventilation for PC Cases-[Black]
More Info

From the product description, check product page for current description, price and availability:

  • Designed to quietly cool Xboxs, Playtations, Rokus, TVs, receivers, mondems, routers, DVRs, computers, and other audio video electronics.
  • Features a multi-speed controller to set the fan’s speed to optimal noise and airflow levels.
  • Dual-ball bearings have a lifespan of 50,000 hours and allows the fans to be laid flat or stand upright
  • The power adapter increases maximum fan speed and enables the fan to be powered through an AC outlet.
  • 120 x 120 x 25 mm ( 4.72 x 4.72 x 1 in. ) | Rated Voltage :12V | Airflow: 92.3 ±10%CFM | Rated Current: 0.45A | Speed: 3000 RPM | Power: less than 2W at slowest speed ; 4.4 W at full speed

 

Kingwin 120mm CF-012LB Silent Fan, For Computer Cases, CPU Coolers, Long Life Bearing, Quiet Efficient Cooling, and Provide Excellent Ventilation for PC Cases-[Black] – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

400 GPH Submersible Pump, Brushless Motor, Stainless Impeller Shaft + Recirculating Draft Line Cleaning Build

Winkeyes 400GPH Pump

More Info

From the product description, check product page for current description, price and availability:

Highlighted Features
  • USE BRUSHLESS MOTOR, run smoothly, low noise, long working life compared with brush motor, keep it quiet and not scare the fish.
  • ANTI DRY BURNING DESGIN, the fish pong pump can withstand 48 hours dry burning. So no need to worry about there is not enough water in your fish tank when you go on a short trip.
  • STRONG POWER HIGH LIFT, this fountain pump max lift height: 6.9ft. 25W high efficiency motor for energy saving. Lift height is a max height the water goes up, after connecting the water pipe to the nozzle (Make sure the joint sealed securely and tightly)
  • STAINLESS STEEL PUMP IMPELLER SHAFT, corrosion resistance, strong driving, long working life, so JAKIELAX submersible pump also fit for sea water
  • SUCTION CUP 2 NOZZLES ADJUSTABLE FLOW RATE, 4 individual powerful suction cups that hold the pump securely on the right side of aquarium, vertically or horizontally. water change pump has 2 nozzles for optional
Learn More

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

Winkeyes 400GPH Water Pump with 48 Hours Anti Dry Burning, Ultra Quiet 25W Submersible Fountain Aquarium Fish Pond Hydroponic Pump with 6.9ft High Lift, 5.9ft Power Cord, 2 Nozzles

– affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading →

Adding a Tri-clamp Fitting to a Homebrew Keg Lid!

This article is by Homebrew Finds Reader Kris G.  Thank you Kris for your creativity and hard work!

Editors Note: This is an advanced project that requires additional tools, skill and materials. This post outlines the process that Kris took to modify his keg lid with a weldless tri-clamp bulkhead. Product specifications can change over time, double check to make sure that current specifications match your needs.

Adding a Tri-clamp Fitting to a Homebrew Keg Lid

Carboys, conicals, buckets, kegs, etc. There is an ever-growing number of options for fermentation vessels. I recently moved away from carboys to experiment with pressurized fermentation. I didn’t feel like buying anything new, so why not repurpose a corny keg for fermentation? This past year I “right-sized” my batches down to 2.5-3 gallons making a corny the perfect size for fermenting. With a couple modifications (shortened dip tube, hop screen, etc), I had an old 5 gallon corny now as a dedicated fermenter. An added bonus was that it fit perfectly in my temp-controlled chest freezer.

Fermenting in a Keg Using TC Equipped Lid

Related: Fermenting Under Pressure

Commercial Option Now Available, Build Continues Below:

304 stainless steel Cornelius Keg Lid with 1.5" Tri-clamp Ferrule,NEW Corny Beer Keg Lid 60PSI PRV Food Grade Dry Hopper

304 stainless steel Cornelius Keg Lid with 1.5″ Tri-clamp Ferrule,NEW Corny Beer Keg Lid 60PSI PRV Food Grade Dry Hopper – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This article contains affiliate links. We may make a small percentage if you use our links to make a purchase. You won’t pay more and you’ll be supporting Homebrew Finds and more content like this. Thank you for your support!

I started seeing some other homebrew fermenters with tri-clamp connections on top. Blogs all around showed them used with blowoff tubes, thermowells, carbonation stones, CIP spray balls, etc. It seemed like a great universal connection with a ton of uses. Most importantly to me, I wanted the tri-clamp connection to build an oxygen-free dry hop dropper (that build is an article for another day).

TC Equipped Lid with Butterfly Valve – Also: Color Coded Keg O-Rings

Read on to see my trials and tribulations while adding a TC bulkhead to my corny lid.
Build note: This is a weldless build. If you’ve got the ability/skill/tools to weld stainless, go for it!

Safety Note: Ensure that you are using all tools properly and wearing all the proper PPE. You will be drilling/cutting metal which is both sharp and hot.

PLEASE BE CAREFUL WHEN FOLLOWING THESE INSTRUCTIONS.
HBF is not responsible for your irresponsibility. At time of this writing, I am fully up to date with my tetanus shot. That may or may not be related…

Supplies

Editors Note: Note that multiple variations of these products may be available, as such a different version may appear at these links. Double check sizes and features.

Continue reading →

6 x Neodymium Magnets + Double-Sided Adhesive

MIKEDE Neodymium Rare Earth Disc Magnets, Strong Permanent Magnets with Double Sided Adhesive Ideal for Fridge, DIY, Building, Scientific, Craft, etc, 1.26 inch D x 1/8 inch H - 6 Packs

MIKEDE Neodymium Rare Earth Disc Magnets, Strong Permanent Magnets with Double Sided Adhesive Ideal for Fridge, DIY, Building, Scientific, Craft, etc, 1.26 inch D x 1/8 inch H – 6 Packs

More Info

From the product description, check product page for current description, price and availability:

  • STRONGER THAN THE COMPETITION – Made from the strong magnetic element, our pure neodymium disc magnets are incredibly powerful. This set of premium rare earth magnets can handle your project or task.
  • UNMATCHED QUALITY – Your safety is our highest priority. Chipped, broken magnetic shards are dangerous. We use thicker, industrial grade, durable N45 grade neodymium rather than extremely brittle N52 used by our competitors.
  • PREMIUM QUALITY COATING – You will love the smooth and shiny finish. Our magnets are protected with a corrosion resistant Ni-Cu-Ni (Nickel-Copper-Nickel) coating to create a high quality silver look that doesn’t rust or scratch.
  • UNLIMITED USES – No matter your application, our powerful magnets can handle the job. These thin magnetic discs work great as strong refrigerator magnets, arts and crafts, DIY projects, hanging spice jars, pictures, whiteboards, tools in the garage, or science classroom at school.

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

Potential uses: Use as “keeper magnets” to retrieve and secure stir bars in yeast starters.  Use as part of a DIY stir plate build.  Use to help secure a DIY magnetic drip tray on your kegerator.  Assist with keeping signs, labels and notes in place.

Also: How To: Step by Step Making a Magnetic Drip Tray–

MIKEDE Neodymium Rare Earth Disc Magnets, Strong Permanent Magnets with Double Sided Adhesive Ideal for Fridge, DIY, Building, Scientific, Craft, etc, 1.26 inch D x 1/8 inch H – 6 Packs – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

6 x Neodymium Magnets + Double-Sided Adhesive

MIKEDE Neodymium Rare Earth Disc Magnets, Strong Permanent Magnets with Double Sided Adhesive Ideal for Fridge, DIY, Building, Scientific, Craft, etc, 1.26 inch D x 1/8 inch H - 6 Packs

MIKEDE Neodymium Rare Earth Disc Magnets, Strong Permanent Magnets with Double Sided Adhesive Ideal for Fridge, DIY, Building, Scientific, Craft, etc, 1.26 inch D x 1/8 inch H – 6 Packs

More Info

From the product description, check product page for current description, price and availability:

  • STRONGER THAN THE COMPETITION – Made from the strong magnetic element, our pure neodymium disc magnets are incredibly powerful. This set of premium rare earth magnets can handle your project or task.
  • UNMATCHED QUALITY – Your safety is our highest priority. Chipped, broken magnetic shards are dangerous. We use thicker, industrial grade, durable N45 grade neodymium rather than extremely brittle N52 used by our competitors.
  • PREMIUM QUALITY COATING – You will love the smooth and shiny finish. Our magnets are protected with a corrosion resistant Ni-Cu-Ni (Nickel-Copper-Nickel) coating to create a high quality silver look that doesn’t rust or scratch.
  • UNLIMITED USES – No matter your application, our powerful magnets can handle the job. These thin magnetic discs work great as strong refrigerator magnets, arts and crafts, DIY projects, hanging spice jars, pictures, whiteboards, tools in the garage, or science classroom at school.

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

Potential uses: Use as “keeper magnets” to retrieve and secure stir bars in yeast starters.  Use as part of a DIY stir plate build.  Use to help secure a DIY magnetic drip tray on your kegerator.  Assist with keeping signs, labels and notes in place.

Also: How To: Step by Step Making a Magnetic Drip Tray–

MIKEDE Neodymium Rare Earth Disc Magnets, Strong Permanent Magnets with Double Sided Adhesive Ideal for Fridge, DIY, Building, Scientific, Craft, etc, 1.26 inch D x 1/8 inch H – 6 Packs – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

520 Piece Stainless Steel Screw, Washer & Nut Assortment

520pcs Screws and Nuts, Metric Hex Socket Pan Head Screws, 304 Stainless Steel M3 M4 M5 Bolt Nuts Flat Washers Machine Screws Assortment Kit

520pcs Screws and Nuts, Metric Hex Socket Pan Head Screws, 304 Stainless Steel M3 M4 M5 Bolt Nuts Flat Washers Machine Screws Assortment Kit

More Info

From the product description, check product page for current description, price and availability:

  • 🔧 Screw Type : M3 M4 M5 hex socket pan head screws bolts come with relevant nuts and flat washers.
  • 🔧 Drive Type: Internal Hex.
  • 🔧 Screw Sizes: M3*8mm x 30pcs, M3*12mm x 30pcs, M3*16mm x 30pcs, M3*20mm x 30pcs, M4*8mm x 30pcs, M4*12mm x 20pcs, M4*16mm x 20pcs, M4*20mm x 20pcs, M5*8mm x 15pcs, M5*12 mm x 15pcs, M5*16mm x 10pcs, M5*20mm x 10pcs, M3/M4/M5 Wrench x 1pcs, M3 nuts x 120pcs, M4 nuts x90pcs, M5 nuts x 50pcs.
  • 🔧 Widely Use:M3 Hex Socket Head Cap Screws Nuts are great for professionals, amateurs, landlords, handymen, repair men, women, woodworking, construction, plumbing, HVAC and so on. 
  • 🔧 Quality : High Grade 304 stainless steel,meet your different demands(indoor or outdoor).

 

Use for your compatible homebrewing projects and fixes and more.

520pcs Screws and Nuts, Metric Hex Socket Pan Head Screws, 304 Stainless Steel M3 M4 M5 Bolt Nuts Flat Washers Machine Screws Assortment Kit – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Lyqily 740GPH Submersible Water Pump, Draft Line Cleaning, Potential Mark II Replacement & More

Lyqily 740GPH Water Pump Ultra Quiet 55W Submersible Fountain Aquarium Fish Pond Hydroponic Pump with 8.5ft High Lift, 5.9ft Three-pin Plug Power Cord, 3 Nozzles(0.51"/0.63"/0.75")

Lyqily 740GPH Submersible Water Pump Ultra Quiet 55W

More Info

From the product description, check product page for current description, price and availability:

Product Name: Submersible Pump

Ultra-quiet Mini Submersible Pump Compact Multifunctional Detachable

SPECIFICATION
Max Flow Rate: 2800L/H
Max Lift Height: 2.6m
Power: 55W
Voltage: 110-120V/60Hz
Length of Power Cord: 1.8m
Dimension: 105mm x 66mm x 88mm

OPERATE
Neither clog up the entrance of the pump nor suck any dirty liquids.
Should the pump be used on a dirty surface, lift it a bit so that a contact with debris is avoided.
To lower the flood of water, use the control lever located on the side of the pump.
Immerse the pump into the water before connecting it to the plug.
At the very beginning, the pump may not work out properly as it might have some air inside,
So just take it off the water and immerse it again: it will surely work out.

PRECAUTIONS
Always disconnect the plug before handling the pump.
Do not use it without water.
Do not grab it using its cable.
Use only cold water.
Use the pump only if completely immersed.

UPKEEP
Remove the frontal part of the pump and the fan and wash them under flowing water.
Do not remove the drum of the pump.
Remove the frontal part and check that the fan runs the proper way.
Check the pump monthly and make sure the pump and its exit are free of obstruction.

 

Potential Uses:

  • I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly
  • As part of a recirculating wort chiller setup (on the chilled water side).

This looks very similar to the pump featured in Sourcing a Replacement Pump for Mark’s Keg and Carboy Washer – the only thing I’m seeing that’s different is a 3 prong cord vs 2 prong

Lyqily 740GPH Water Pump Ultra Quiet 55W Submersible Fountain Aquarium Fish Pond Hydroponic Pump with 8.5ft High Lift, 5.9ft Three-pin Plug Power Cord, 3 Nozzles(0.51″/0.63″/0.75″) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link



This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

1/2″ Stainless Steel Tee Fitting – 304 SS

1/2″ Stainless Steel Tee Fitting

More Info

From the product description, check product page for current description, price and availability:

  • 【Material】: 304 stainless steel
  • 【Design】: NPT1/2″ Female x NPT1/2″ Female x NPT1/2″ Female
  • 【Function】: Metric BSP NPT1/2″ Female x NPT1/2″ Female x NPT1/2″ Female straight thread pipe fitting adapter

 

ORLEIMI Stainless Steel Pipe Fitting Tee Pipe Fitting NPT 1/2 Female Connector 3 Way Coupling Forged Union T Thread Adapter 304 Stainless Steel 1 Piece – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

400 GPH Submersible Pump, Brushless Motor, Stainless Impeller Shaft + Recirculating Draft Line Cleaning Build

Winkeyes 400GPH Pump

More Info

From the product description, check product page for current description, price and availability:

Highlighted Features
  • USE BRUSHLESS MOTOR, run smoothly, low noise, long working life compared with brush motor, keep it quiet and not scare the fish.
  • ANTI DRY BURNING DESGIN, the fish pong pump can withstand 48 hours dry burning. So no need to worry about there is not enough water in your fish tank when you go on a short trip.
  • STRONG POWER HIGH LIFT, this fountain pump max lift height: 6.9ft. 25W high efficiency motor for energy saving. Lift height is a max height the water goes up, after connecting the water pipe to the nozzle (Make sure the joint sealed securely and tightly)
  • STAINLESS STEEL PUMP IMPELLER SHAFT, corrosion resistance, strong driving, long working life, so JAKIELAX submersible pump also fit for sea water
  • SUCTION CUP 2 NOZZLES ADJUSTABLE FLOW RATE, 4 individual powerful suction cups that hold the pump securely on the right side of aquarium, vertically or horizontally. water change pump has 2 nozzles for optional
Learn More

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

Winkeyes 400GPH Water Pump with 48 Hours Anti Dry Burning, Ultra Quiet 25W Submersible Fountain Aquarium Fish Pond Hydroponic Pump with 6.9ft High Lift, 5.9ft Power Cord, 2 Nozzles

– affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading →