Category Archives: Projects

Measureman Digital Pressure Gauge + My Spunding Valve Build

MEASUREMAN 2-1/2" Dial Size Digital Air Pressure Gauge with 1/4'' NPT Bottom Connector and Protective Boot, 0-60psi, Accuracy 1%, Battery Powered, with LED Light

Measureman 2-1/2″ Dial Size Digital Air Pressure Gauge with 1/4” NPT Bottom Connector and Protective Boot, 0-60psi, Accuracy 1%, Battery Powered, with LED Light

More Info
Highlighted Features
  • For pneumatic, air pressure measuring, typical for tire gauge, tire inflator, air pressure system etc.
  • Dial size: 2-1/2", blue backlight
  • Plastic case and protective boot,
  • Solid brass connection, standard 1/4"NPT male
  • 0-60psi, bar, kg/cm2, kpa, Accuracy:1%
Learn More

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

Note from HBF: For whatever reason this offering seems to periodically change. The one I’m intending to link to is a 2 1/2 dial with 1/4″ NPT that reads 0 to 60 PSI. It’s possible a different variation will show up.

A possible homebrew application for this is to use it as part of a Spunding Valve Build.   A Spunding Valve allows you to ferment under pressure, naturally and precisely carbonate in the keg, fix over-carbonated beers and lots more. See: Build a Spunding Valve

Measureman 2-1/2″ Dial Size Digital Air Pressure Gauge with 1/4” NPT Bottom Connector and Protective Boot, 0-60psi, Accuracy 1%, Battery Powered, with LED Light – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

tsrspund

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Brennan Industries 1/4″ Male NPT to 1/4″ Female Flare + Build a Spunding Valve How & Why

10″ Filter Housing [Hop Randall, Water or Beer Filter Projects]

Hydronix HF3-10CLWH12PR, 10" Clear Housing with White Rib Cap For RO & Filtration Systems, 1/2" Ports with Relief Button

Hydronix HF3-10CLWH12PR, 10″ Clear Housing with White Rib Cap For RO & Filtration Systems, 1/2″ Ports with Relief Button

More Info


Highlighted Features
  • 10 inch
  • NSF standard 42 certified material
  • 1/2 inch Ports
  • San material body
  • 75 psi max. Pressure
Learn More

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

Possible homebrewing uses for this:  Hop Randall for infusing hops and spices at serving time [See: Use a Hop Randall for Increased Hop Flavor and Aroma], Water filter for brewing water or beer and wine filter.  Note this would all be projects and require additional materials to complete.  Make sure this meets the specifications for any intended application.

Hydronix HF3-10CLWH12PR, 10″ Clear Housing with White Rib Cap For RO & Filtration Systems, 1/2″ Ports with Relief Button – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Dow Corning Multi-Purpose Sealant [Repairing Loose Cornelius Keg Handles and Bases]

Dow Corning 3138356 732 Clear Multi-Purpose Sealant, -60 to 180 Degree C, 90 mL

Dow Corning 3138356 732 Clear Multi-Purpose Sealant, -60 to 180 Degree C, 90 mL

More Info


Highlighted Features
  • Clear general purpose silicone adhesive/sealant
  • One-component adhesive/sealant that is easy to apply
  • Non-sag, paste consistency that cures to a tough, flexible rubber
  • Acetoxy cure system that cures at room temperature when exposed to moisture in the air
  • Adheres to glass, metal, porcelain, ceramic, painted surfaces, non-oily woods, many plastics and rubbers
Learn More

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions. prod:B00063X38M

 

A potential application of this sealant is to use it to repair loose homebrew keg handles and bases.  A loose corny keg handle or base can be an annoyance.  If your keg is in otherwise good shape, it may make sense to repair a loose handle or base.

See: Fix It! Repairing Loose Cornelius Keg Handles and Bases

Dow Corning 3138356 732 Clear Multi-Purpose Sealant, -60 to 180 Degree C, 90 mL – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also Consider: 3M Black Super Weatherstrip and Gasket Adhesive, 08008, 5 fl oz – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

3M 08008 Black Super Weatherstrip Adhesive [Repairing Loose Cornelius Keg Handles and Bases]

Other Problems?  Fix It!

Continue reading →

Ferroday Stainless Carbonation Cap for PET Bottles – works on gas AND liquid posts

FERRODAY Stainless Steel Carbonation Cap Forced Carbonation PET Bottle Filling 5/16 Barb CO2 Coupling to Carbonate Soda Beer Stainless Steel PET Bottle Carbonation Cap + O-ring + Gasket

Stainless steel ball lock carbonation cap with barb.  Includes replacement o-ring.

More Info


Highlighted Features
  • Heavy Duty Stainless Carbonation Cap: High quality stainless steel carbonation cap, well made for rust resistance and corrosion-proof. Would last for a long time in good condition. A must have equipment for homebrew Carbonation
  • Great for Homebrew Carbonation/ Cleaning: This ball lock carbonation cap is most used for homemade beverage carbonation, and meanwhile it is great for cleaning beer/ soda/ water/ juice lines. Easy to set up
  • Easy Forced Carbonation Drinks: Ideal for forced carbonation drinks in PET bottles. Fit for most soft drink PET bottles. Just simply attach this cap with a PET bottle and a ball-lock gas disconnect to send CO2 into the bottle for beverage carbonation. Your homemade drinks will be right ready for drinking
  • Food Safe Gasket/ No Leaks: We use premium material for the gaskets and o-rings. High-resilient food safe rubber gaskets seal against the threads and give you no leak connections! We updated our package with 2 more O-rings and 1 more gasket for replacement
  • No Regrets Purchase: Stainless steel made carbonation cap weighs about 3.6oz. If any leaks, please change the O-ring or Gasket with the extra ones. We are committed to offering you high-quality products as well as superior service! Please let us know if there are any problems with this Stainless Steel Carbonation Cap, we will try our best to serve you. Provide technical support
Learn More

 

Applications:

  • PET Bottles as Growlers: These are generally intended to convert 1L and 2L bottles to growlers.  Fill up a 1L or 2L PET bottle with your favorite homebrew.  Put one of these on (purge the headspace by squeezing if you want to) and then pressurize for transport.  This should help to reduce oxygen pickup and maintain carbonation levels.
  • Fine tune or rapidly carbonate beer: You can also use this cap to rapidly carbonate beer.  Same process as for transport, just set your regulator to the proper pressure and shake or agitate the PET bottle to help introduce CO2.  Or hook it up to CO2 and let it sit in you kegerator.
  • Draft Line Cleaning Projects:  I have developed three draft line cleaning projects using similar SS Caps – Build A Recirculating Draft Line Cleaning Pump | Mark II Keg and Carboy Cleaner Draft Line Cleaning Pump Conversion | Building a Simple Ball Lock Draft Line Flushing Setup
  • Related Top Post: Fun with Carbonation Caps!

One of the questions that arises on these type of carb caps, is… does it work with both liquid and gas posts?  Some models are universal fit and some work only with gas posts.  For draft line cleaning projects to work well, at least in my opinion, the carb cap that’s used needs to be universal.  I’m happy to report that the one I received did indeed work with both liquid and ball lock posts.  Check product description for current specs.

Check out my Hands on Review of this great carb cap.

FERRODAY Stainless Steel Carbonation Cap Counter Pressure Bottle Filling 5/16 Barb CO2 Coupling to Carbonate Soda Beer Water Stainless Steel PET Bottle Filling Carbonation Cap & O-ring + Flat Gasket – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

FERRODAY Stainless Steel...image
FERRODAY Stainless Steel Carbonation Cap Forced Carbonation PET Bottle Filling 5/16 Barb CO2 Coupling to Carbonate Soda Beer Stainless Steel PET Bottle Carbonation Cap + O-ring + Gasket
$17.99
FERRODAY Stainless Steel...image
FERRODAY Stainless Steel Carbonation Cap Forced Carbonation PET Bottle Filling 5/16 Barb CO2 Coupling to Carbonate Soda Beer Stainless Steel PET Bottle Carbonation Cap + O-ring + Gasket
$9.98

Continue reading →

OneBom Ball Lock Post to 1/4″ NPT – add a ball lock post to your project

OneBom Ball Lock Post with Poppets, 1/4’’ Male NPT Hex Nipple

More Info


Highlighted Features
  • ★ 1/4’’ MALE NPT HEX NIPPLE - NPT threads for creating tighter seals than straight threads .Male National Pipe Taper (NPT) threads on both ends for connecting female pipes or home brewing
  • ★WELL MADE – Both ball lock post and hex nipple constructed from 304 Stainless Steel. This material have excellent corrosion resistance. It`s perfect for use with rust sensitive applications and food applications.
  • ★PACKAGE INCLUDES – gas ball lock, 1/4’’hex nipple, 2 ball lock post o-rings, poppet
  • ★PLS NOTE - 19/32-18 Gas Ball Lock Post only fit for Cornelius brand kegs. NOT compatible with Firestone, Hoover, and Spartanburg kegs. The assembly can also be fitted to regulators, gas manifolds and various other items.
  • ★90 DAYS GUARANTEE - Click the “Add to Cart” Button and Buy with No Regrets. Just turn them back if You Got Any Problem but don`t want to contact us. Or we`ll send you a new one to make you satisfied if you need.
Learn More

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

You could use this assembly to add a ball lock post to one of your projects.  Note that these are available in both gas and liquid versions

Also Consider:

ball lock jumperStainless Steel Ball Lock Jumper with Food Grade Silicone O-Rings: Allows you to connect multiple ball lock runs to clean multiple lines and taps at the same time. Works with both liquid and gas QDs.  Stainless Steel Ball Lock Jumper – via Valuebrew – An easy add-on… food grade o-rings, featured in our Keg Rebuild Post


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

400 GPH Utility Pump + Draft Line Cleaning Builds

Fountain Pump, 400GPH Submersible Water Pump, Durable 25W Outdoor Fountain Water Pump with 6.5ft Power Cord, 3 Nozzles for Aquarium, Pond, Fish Tank, Water Pump Hydroponics, Backyard Fountain

Submersible Utility Pump

More Info


Highlighted Features
  • PROVIDE YOU COMFORT & QUIET ENVIROMENT--Our fountain pump’s ultra-quiet operation will let you feel that the sounds of the water pouring out of your fountain is such a relaxing and tranquil sound, and you will love sitting out on your patio watching the squirrels and birds bath and now the peaceful sounds of our fountain make it even more enjoyable.
  • MULTI-OCCASIONS--The fountain pump can make circulation to your tank and give your lovely fish a near-natural environment. This submersible water pump can create water current, ideal for a medium-sized aquarium, small pond, water garden, and desktop water fountains. Perfect for backyard fountain/waterfall, aquarium, ponds, fish tank, tabletop fountains, garden statuary, patio drip irrigation system and hydroponic systems and more.
  • ADJUSTABLE--The fountain pump is designed with an adjusting knob, allowing to get just the amount of water pressure you want. It comes with 3 optional nozzles to create different views, each with its own unique design.
  • COMPACT BUT POWERFUL--The fountain pump’s compact design is easy to hide & disguise, 25W super efficiency motor continually lift water column. Reasonable long power cord is heavy duty and easy to installation. The pump has 4 strong rubber suction cups at the bottom of the fountain pump helps keep in your fish tank.
  • EASY TO USE--The fountain pump's manual disassembly designed shell allow you clean the pump input port and filter/impeller easily. And simply plug in power for quick water draining.
Learn More

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

CWKJ Fountain Pump, 400GPH Submersible Water Pump, Durable 25W Outdoor Fountain Water Pump with 6.5ft Power Cord, 3 Nozzles for Aquarium, Pond, Fish Tank, Water Pump Hydroponics, Backyard Fountain – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading →

IP65 Rated Waterproof Project Box

Zulkit Waterproof Plastic Project Box ABS IP65 Electrical Junction Box Enclosure Black 7.87 x 4.72 x 2.95 inch (200 x 120 x 75mm)

Waterproof Plastic Project Box

More Info


Highlighted Features
  • IP65 Waterproof: The project box is IP65 Waterproof certificated, can protect against dust, corrosion and splashing water, ensure electrical components dry and effective in harsh environments.
  • Outer Size of electronic project box: 7.9" x 4.7" x 2.95" (200mmx120mmx75mm)/(L*W*H); Inner Size of electrical enclosure(Approx.): 7.6"x4.4"x2.7" (192mmx112mmx68mm)/(L*W*H)- - (Allowable Error: 2mm);Thickness: 0.12''/3mm
  • High Quality Material: The electrical box is made of ABS material,screws are made of stainless steel.Solid construction junction box can protect your inner projects in indoor or outdoors.
  • Versatile and Customizable Design: The electrical box allows for easy customization, drilling, and modification, Easy to shape openings for many items like meters, LCDs, sockets, LEDs, buttons and so on,Sturdy and terrific for making your DIY projects.
  • Package Content: 1 x Outdoor Waterproof Junction Boxes, Ideal for electronic projects, Arduino enclosure, power supply units, temperature controller box, etc.
Learn More

 

Use for your homebrew-related project and more.

Note that multiple sizes are available at varying costs.

Zulkit Waterproof Plastic Project Box ABS IP65 Electrical Junction Box Enclosure Black 7.87 x 4.72 x 2.95 inch (200 x 120 x 75mm) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Stainless Steel Carbonation Cap for PET Bottles

Yosoo Stainless Steel CarbonationHome Brew Beer Fast Soda Made Counter Pressure Bottle Filling Fit Most Soft Drink PET Bottles

Yosoo Stainless Steel Carbonation Cap Home Brew Beer Fast Soda Made Counter Pressure Bottle Filling Fit Most Soft Drink PET Bottles

More Info


Highlighted Features
  • 【Stainless Steel】Made of stainless steel material, more solid and last longer, making it easier to carbonate your beverages!
  • 【Method of 】With this you can simply fill an old PET bottle with cold liquid of your choice and carbonate by connecting your gas ball lock disconnect.
  • 【Making Soft Drinks】With it, you can make your own soda water, carbonate beer, or even make your own soft drinks.
  • 【for Most PET Bottles】It is designed to fit onto most soft drink PET bottles, inject CO2 into the bottle, creating carbonation.
  • 【Add and Maintain Carbonation】The carbonation is highly effective method to add and maintain carbonation in beverages for extended periods of time.
Learn More

 

Applications:

  • PET Bottles as Growlers: These are generally intended to convert 1L and 2L bottles to growlers.  Fill up a 1L or 2L PET bottle with your favorite homebrew.  Put one of these on (purge the headspace by squeezing if you want to) and then pressurize for transport.  This should help to reduce oxygen pickup and maintain carbonation levels.
  • Fine tune or rapidly carbonate beer: You can also use this cap to rapidly carbonate beer.  Same process as for transport, just set your regulator to the proper pressure and shake or agitate the PET bottle to help introduce CO2.  Or hook it up to CO2 and let it sit in you kegerator.
  • Draft Line Cleaning Projects:  I have developed three draft line cleaning projects using similar SS Caps – Build A Recirculating Draft Line Cleaning Pump | Mark II Keg and Carboy Cleaner Draft Line Cleaning Pump Conversion | Building a Simple Ball Lock Draft Line Flushing Setup
  • Related Top Post: Fun with Carbonation Caps!

Yosoo Stainless Steel CarbonationHome Brew Beer Fast Soda Made Counter Pressure Bottle Filling Fit Most Soft Drink PET Bottles – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading →

Set of 4 Heavy Duty Swivel Casters, 2,000 lb Load Limit

3 inch Heavy Duty Casters, Lockable Bearing Caster Wheels with Brake, Swivel Casters for Furniture and Workbench, Set of 4, Load 1500lbs (Free screws and a spanner)

Set of four, 3″ Heavy Duty Casters

More Info


Highlighted Features
  • ✅【Upgraded Materials and Processes】- Featuring a thickened universal steel column, reinforced plates, and dual support bearings for enhanced stability. Our high-strength stainless steel electrophoresis stand and superior polyurethane ensure durability, while the wear-resistant, noise-reducing steel ball ensures smooth rolling. Offer exceptional abrasion resistance, silent shock absorption, wear-proof, and leave no drag marks. Included free screws and a spanner. Total Load Capacity-2000lbs.
  • ✅【Locking Brake Mechanism】- Equipped with 3-inch casters, this set includes four wheels, each with an individual brake. The brake simultaneously locks both the wheel and the swivel mechanism, effectively preventing the device from moving and potentially causing harm.
  • ✅【360-Degree Rotating Top Plate】- Easily maneuver in any direction with minimal effort. Please note that the 4-inch casters provide ample size for easy rolling. 【Refer to Figure 2 for detailed dimensions】
  • ✅【Versatile, Widely Used and Strength-Saving】 - Whether it's a table, seat, shelf, or any other item, adding these caster wheels makes moving a breeze. Durable and wear-resistant, they leave no marks on floors. Ideal for both industrial and residential applications, these furniture and workbench casters are perfect for a variety of scenarios.
  • ✅【Worry free purchase】 - Enjoy peace of mind with our 2-year warranty and free replacement. No questions asked. Trust in ABSLIMUS, a highly reputable brand known for its quality caster wheels.
Learn More

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

Note from HBF: Your around-the-brewery project may need some casters. I’m guessing the stated load limit is applicable when all casters are being used.

ABSLIMUS 3 inch Heavy Duty Casters Load 2000lbs, Lockable Bearing Plate Caster Wheels with Brakes, 360-degree Swivel Casters for Furniture and Workbench Cart, Set of 4 (Free Screws and a Spanner) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Primefit CR1401G Replacement Air Regulator + Spunding Valve Build

Primefit CR1401G Replacement Air Regulator with steel-Protected Gauge, 1/4" Npt

Primefit CR1401G Replacement Air Regulator with steel-Protected Gauge, 1/4″ Npt

More Info

From the product description, check product page for current description, price and availability:

  • Air regulator for precisely regulating and maintaining constant air pressure
  • Accurate downstream air pressure regulation between 1 and 160-psi
  • High impact composite regulator knob and steel protected gauge
  • 60-Scfm at 100-PSI with 1/4-inch NPT ports

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

A potential homebrew application for this is to use it as part of a Spunding Valve Build.   A Spunding Valve allows you to ferment under pressure, naturally and precisely carbonate in the keg, fix over-carbonated beers and lots more. See: Build a Spunding Valve for more on Spunding Valves.

Most of the builds detailed in our Spunding Resource Post consist of a PRV Valve + tee + gauge + connection option.  Generally four parts in total.  The CR1401G replaces two parts, both the tee and gauge.  See: Spunding Valve Build: Using Primefit CR1401G Replacement Air Regulator for more details

Primefit CR1401G Replacement Air Regulator with steel-Protected Gauge, 1/4″ Npt – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

tsrspund

Related Resources!

Homebrew Finds is Spunding Central!  Check our related resources and more detailed builds

Continue reading →

GROWNEER 550GPH Submersible Pump + Recirculating Draft Line Cleaning Builds

GROWNEER 550GPH Submersible Pump 30W Ultra Quiet Fountain Water Pump, 2000L/H, with 7.2ft High Lift, 3 Nozzles for Aquarium, Fish Tank, Pond, Hydroponics, Statuary

550 GPH Subermsible Pump by Growneer

More Info

Highlighted Features
  • WATER FLOW CONTROL -- The GROWNEER water pump features a control knob to adjust the flow of water, allowing you to achieve the desired water pressure. The maximum flow rate is 550 GPH (2000 L/H). Note: It's recommended to use a residual current protection socket or circuit breaker when using outdoors
  • STRONG POWER & HIGH LIFT -- Maximum Lift Height: 7.2 ft. The water submersible pump model number is SML-630. 30W high-efficiency motor, energy-saving. Lift height refers to the maximum height that water rises after the water pipe is connected to the nozzle. (Make sure the joint is tightly sealed)
  • 3 NOZZLES WATER PUMP -- Each submersible water pump has 3 nozzles to choose from: 0.51"/0.62"/0.75". Provides different water flows according to your needs. Threaded fittings make it more stable. Detachable and cleanable
  • SUCTION CUP & 5.9FT POWER CORD -- The aquarium pump has a long enough cord for easy installation. 4 independent powerful suction cups help keep it in place so you can stick it vertically or horizontally to the right side of your aquarium
  • WIDE APPLICATION -- The water fountain pump circulates and aerates the water, making it more attractive to your fish or turtles. This submersible pump is ideal for aquariums, fountains, spouts hydroponic systems, etc
Learn More

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

GROWNEER 550GPH Submersible Pump 30W Ultra Quiet Fountain Water Pump, 2000L/H, with 7.2ft High Lift, 3 Nozzles for Aquarium, Fish Tank, Pond, Hydroponics, Statuary – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading →

Stainless Steel Carbonation Cap for PET Bottles

Yosoo Stainless Steel CarbonationHome Brew Beer Fast Soda Made Counter Pressure Bottle Filling Fit Most Soft Drink PET Bottles

Yosoo Stainless Steel Carbonation Cap Home Brew Beer Fast Soda Made Counter Pressure Bottle Filling Fit Most Soft Drink PET Bottles

More Info


Highlighted Features
  • 【Stainless Steel】Made of stainless steel material, more solid and last longer, making it easier to carbonate your beverages!
  • 【Method of 】With this you can simply fill an old PET bottle with cold liquid of your choice and carbonate by connecting your gas ball lock disconnect.
  • 【Making Soft Drinks】With it, you can make your own soda water, carbonate beer, or even make your own soft drinks.
  • 【for Most PET Bottles】It is designed to fit onto most soft drink PET bottles, inject CO2 into the bottle, creating carbonation.
  • 【Add and Maintain Carbonation】The carbonation is highly effective method to add and maintain carbonation in beverages for extended periods of time.
Learn More

 

Applications:

  • PET Bottles as Growlers: These are generally intended to convert 1L and 2L bottles to growlers.  Fill up a 1L or 2L PET bottle with your favorite homebrew.  Put one of these on (purge the headspace by squeezing if you want to) and then pressurize for transport.  This should help to reduce oxygen pickup and maintain carbonation levels.
  • Fine tune or rapidly carbonate beer: You can also use this cap to rapidly carbonate beer.  Same process as for transport, just set your regulator to the proper pressure and shake or agitate the PET bottle to help introduce CO2.  Or hook it up to CO2 and let it sit in you kegerator.
  • Draft Line Cleaning Projects:  I have developed three draft line cleaning projects using similar SS Caps – Build A Recirculating Draft Line Cleaning Pump | Mark II Keg and Carboy Cleaner Draft Line Cleaning Pump Conversion | Building a Simple Ball Lock Draft Line Flushing Setup
  • Related Top Post: Fun with Carbonation Caps!

Yosoo Stainless Steel CarbonationHome Brew Beer Fast Soda Made Counter Pressure Bottle Filling Fit Most Soft Drink PET Bottles – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading →

Neodymium Countersunk Magnets and Screws, 10 Pack

MIKEDE 10 Pack Strong Neodymium Cup Magnets, 70Lbs+ Holding Force Heavy duty Round Base Cup Magnets with Countersunk Hole, Powerful Industrial Strength Rare Earth Magnets with Screws for Wall Mounting

Neodymium Countersunk Magnets and Screws

More Info


Highlighted Features
  • 【Powerful Magnetic Force】- Our neodymium round base disc magnets are made of rare earth neodymium metal material, which makes their magnetism very strong. Each round magnet is 0.98 inch (25mm) in DIAMETER and 0.22 inch (5.5mm) in HEIGHT. PULL FORCE: 70 LBS+ (Vertical)
  • 【Heavy Duty Rare Earth Magnets 】- These strong magnets with hole are made of NdFeB material with a nickel-plated coat for maximum durability and protection against corrosion. Steel cups protects magnets from breaking which greatly increase the longevity of the neodymium magnets
  • 【Easy to Install】- These countersunk hole magnetic discs for easy use with 10 mounting screws(Included), which makes you able to use them in two different ways. You can not only use these industrial magnets on metallic items, also on non-metallic items. The neodymium cup magnets with countersunk center hole that is perfect for mounting with a flat head screw or bolt
  • 【Useful Small Magnetic Tools】- These heavy duty strong magnets are great above the workbench to hold tools that you use consistently, so they are within easy reach. The powerful neodymium cup magnets will hold up some of your heavier hand tools quite well and very easily. Perfect for organizing and hanging in workshop, and decluttering your home, garage, business and schools. Holding, Lifting, Fishing, Closing, Retrieving, and much more
  • 【Professional Brand】- Made under ISO 9001 Quality Systems. We are professional neodymium cup magnets seller and you can find any magnets you want in our store. Search MIKEDE MAGNETS. Find the strong magnets you want!
Learn More

 

These magnets are designed with a hole in the middle so that they can be mounted via the included magnets.  That may be helpful for an around the brewery project you’re looking to do.

Potential uses: Use as “keeper magnets” to retrieve and secure stir bars in yeast starters.  Use as part of a DIY stir plate build.  Use to help secure a DIY magnetic drip tray on your kegerator.  Assist with keeping signs, labels and notes in place.

Also: How To: Step by Step Making a Magnetic Drip Tray – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

MIKEDE 10 Pack Strong Neodymium Cup Magnets, 70Lbs+ Holding Force Heavy duty Round Base Cup Magnets with Countersunk Hole, Powerful Industrial Strength Rare Earth Magnets with Screws for Wall Mounting – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Makermotor DC Reversible Electric Gear Motor – Motorizing Your Mill?

Makermotor 3/8" D Shaft 12V DC Reversible Electric Gear Motor 50 RPM

Makermotor 3/8″ D Shaft 12V DC Reversible Electric Gear Motor 50 RPM

More Info


Highlighted Features
  • Rated Voltage: 13.5 VDC
  • 3/8" shaft with 1 flat ("D" shaft) where flat to OD is 0.322" and the length of the shaft is 0.886" long
  • Speed: 50 RPM
  • Mounting: M6 screw holes
  • Rated Torque: 6 N-m (4.4 ft-lb)
Learn More

 

This looks to me like it would be a good candidate for motorizing a grain mill. Note that this would be an advanced project that requires additional materials, tools, knowledge and skill. If you give this a try, I’d love to hear about it.

Makermotor 3/8″ D Shaft 12V DC Reversible Electric Gear Motor 50 RPM – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Motorizing Your Mill, Purpose Built Solutions

Related Resources:

Homebrew Grain Mill Reviews!


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

OxiClean Free Versatile...image
OxiClean Free Versatile Stain Remover Powder, 3 lb
$9.28 ($0.14 / load) -$0.29 $8.99 ($0.14 / load)
Vacuum Sealer Machine...image
Vacuum Sealer Machine with 55 Count 8"x12" Food Sealers Bags and 8"*79' Vacuum Sealer Roll, Inkbird Automatic Vacuum Sealers Machine with Built-in Cutter, Dry & Moist Sealing Modes for Food Storage
$65.99
Gamma2 Vittles Vault...image
Gamma2 Vittles Vault Airtight Dog Food Storage Container - Fits up to 35 Pounds of Dry Pet Food - Perfect for Cat and Puppy Kibble - BPA-Free Plastic - Made in the USA - 12" L x 16.75" H
$27.58 -$2.26 $25.32
FLOTit 2.0 -...image
FLOTit 2.0 - No Beer Left Behind Floating Dip Tube with Double Filter Inlet (DFI) of 500/300 micron for always clear beer, less beer waste and no clogging. Made in USA.
$29.00
Meat Thermometer Digital...image
Meat Thermometer Digital for Grilling and Cooking - ANDAXIN Waterproof Ultra-Fast Instant Read Food thermometers with Backlight & Calibration for Kitchen, Deep Fry, BBQ, Grill(Red/Black), LCD
$9.98
VEVOR Magnetic Stirrer,...image
VEVOR Magnetic Stirrer, 0-2000 RPM Stir Plate with Adjustable Speed Knob, 3000mL Plate Stirrer Kit, Stir Bar Included
JUNZHIDA 1/2
JUNZHIDA 1/2" ID Silicone Tubing, Food Grade 1/2" ID x 3/4" OD 10 Feet Length Pure Silicone Hoses High Temp for Home Brewing Winemaking
$14.99

adamztop5

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

400 GPH Submersible Pump, Brushless Motor, Stainless Impeller Shaft + Recirculating Draft Line Cleaning Build

Winkeyes 400GPH Pump

Winkeyes 400GPH Pump

More Info

From the product description, check product page for current description, price and availability:

Highlighted Features
  • USE BRUSHLESS MOTOR, run smoothly, low noise, long working life compared with brush motor, keep it quiet and not scare the fish.
  • ANTI DRY BURNING DESGIN, the fish pong pump can withstand 48 hours dry burning. So no need to worry about there is not enough water in your fish tank when you go on a short trip.
  • STRONG POWER HIGH LIFT, this fountain pump max lift height: 6.9ft. 25W high efficiency motor for energy saving. Lift height is a max height the water goes up, after connecting the water pipe to the nozzle (Make sure the joint sealed securely and tightly)
  • STAINLESS STEEL PUMP IMPELLER SHAFT, corrosion resistance, strong driving, long working life, so JAKIELAX submersible pump also fit for sea water
  • SUCTION CUP 2 NOZZLES ADJUSTABLE FLOW RATE, 4 individual powerful suction cups that hold the pump securely on the right side of aquarium, vertically or horizontally. water change pump has 2 nozzles for optional
Learn More

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

Winkeyes 400GPH Water Pump with 48 Hours Anti Dry Burning, Ultra Quiet 25W Submersible Fountain Aquarium Fish Pond Hydroponic Pump with 6.9ft High Lift, 5.9ft Power Cord, 2 Nozzles – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading →

Anderson Metals 1/4″ Barb x 1/4″ NPT + Spunding Valve Build

Anderson Metals 57001-0404 Brass Hose Fitting, Adapter, 1/4" Barb x 1/4" NPT Male Pipe

Anderson Metals 57001-0404 Brass Hose Fitting, Adapter, 1/4″ Barb x 1/4″ NPT Male Pipe

More Info


Highlighted Features
  • One piece construction
  • Use with plastic tubing or rubber hose
  • Intended for use with hose clamp or crimp type ferrule
  • Barbed edges provide positive connection
  • Excellent vibration resistance
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
Learn More

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

Of course you could use these fittings in lots of different applications.  One possible application is a Spunding Valve build.  A Spunding Valve [See: Spunding Valve Resource Post] allows you to ferment under pressure, naturally and precisely carbonate in the keg, fix over-carbonated beers and more.  This would be part of a “Style 3” build.

Here is a photo of this fitting as part of a Spunding Valve assembly.

Anderson Metals 57001-0404 Brass Hose Fitting, Adapter, 1/4″ Barb x 1/4″ NPT Male Pipe – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

tsrspund

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Stainless Steel Carbonation Cap for PET Bottles

Yosoo Stainless Steel CarbonationHome Brew Beer Fast Soda Made Counter Pressure Bottle Filling Fit Most Soft Drink PET Bottles

Yosoo Stainless Steel Carbonation Cap Home Brew Beer Fast Soda Made Counter Pressure Bottle Filling Fit Most Soft Drink PET Bottles

More Info


Highlighted Features
  • 【Stainless Steel】Made of stainless steel material, more solid and last longer, making it easier to carbonate your beverages!
  • 【Method of 】With this you can simply fill an old PET bottle with cold liquid of your choice and carbonate by connecting your gas ball lock disconnect.
  • 【Making Soft Drinks】With it, you can make your own soda water, carbonate beer, or even make your own soft drinks.
  • 【for Most PET Bottles】It is designed to fit onto most soft drink PET bottles, inject CO2 into the bottle, creating carbonation.
  • 【Add and Maintain Carbonation】The carbonation is highly effective method to add and maintain carbonation in beverages for extended periods of time.
Learn More

 

Applications:

  • PET Bottles as Growlers: These are generally intended to convert 1L and 2L bottles to growlers.  Fill up a 1L or 2L PET bottle with your favorite homebrew.  Put one of these on (purge the headspace by squeezing if you want to) and then pressurize for transport.  This should help to reduce oxygen pickup and maintain carbonation levels.
  • Fine tune or rapidly carbonate beer: You can also use this cap to rapidly carbonate beer.  Same process as for transport, just set your regulator to the proper pressure and shake or agitate the PET bottle to help introduce CO2.  Or hook it up to CO2 and let it sit in you kegerator.
  • Draft Line Cleaning Projects:  I have developed three draft line cleaning projects using similar SS Caps – Build A Recirculating Draft Line Cleaning Pump | Mark II Keg and Carboy Cleaner Draft Line Cleaning Pump Conversion | Building a Simple Ball Lock Draft Line Flushing Setup
  • Related Top Post: Fun with Carbonation Caps!

Yosoo Stainless Steel CarbonationHome Brew Beer Fast Soda Made Counter Pressure Bottle Filling Fit Most Soft Drink PET Bottles – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading →

Set of 4 Heavy Duty Swivel Casters

ABSLIMUS 4 inch Heavy Duty Casters, Lockable Bearing Plate Caster Wheels with Brakes, 360-degree Swivel Casters for Furniture and Workbench Cart, Set of 4, Load 2400lbs (Free Screws and a Spanner)

Set of Four Heavy Duty Casters

More Info


Highlighted Features
  • 🎄【Upgraded Materials and Processes】- Featuring a thickened universal steel column, reinforced plates, and dual support bearings for enhanced stability. Our high-strength stainless steel electrophoresis stand and superior polyurethane ensure durability, while the wear-resistant, noise-reducing steel ball ensures smooth rolling. Offer exceptional abrasion resistance, silent shock absorption, wear-proof, and leave no drag marks. Included free screws and a spanner. Total Load Capacity-2400lbs.
  • 🎄【Locking Brake Mechanism】- Equipped with 4-inch casters, this set includes four wheels, each with an individual brake. The brake simultaneously locks both the wheel and the swivel mechanism, effectively preventing the device from moving and potentially causing harm.
  • 🎄【360-Degree Rotating Top Plate】- Easily maneuver in any direction with minimal effort. Please note that the 4-inch casters provide ample size for easy rolling. 【Refer to Figure 2 for detailed dimensions】
  • 🎄【Versatile, Widely Used and Strength-Saving】 - Whether it's a table, seat, shelf, or any other item, adding these caster wheels makes moving a breeze. Durable and wear-resistant, they leave no marks on floors. Ideal for both industrial and residential applications, these furniture and workbench casters are perfect for a variety of scenarios.
  • 🎄【Worry free purchase】 - Enjoy peace of mind with our 2-year warranty and free replacement. No questions asked. Trust in ABSLIMUS, a highly reputable brand known for its quality caster wheels.
Learn More

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

Note from HBF: Your around-the-brewery project may need some casters.

4 inch Heavy Duty Casters, Lockable Bearing Caster Wheels with Brakes, Swivel Casters for Furniture and Workbench, Set of 4, Load 1800lbs – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Canada Edition… Build a Spunding Valve! – How and Why

A Spunding Valve allows you to maintain a set pressure.  If pressure in the vessel exceeds the set point, it is expelled.  It generally consists of an adjustable PRV valve, a tee, a gauge and a way to connect to your keg.

This is a version of our Spunding Valve Build that features components that are generally available in Canada.

Are you a US Homebrewer?

Check out the US Version of this Post – Build a Spunding Valve! – How and Why

Related Resources:

Homebrewing Applications of a Spunding Valve

  • Pressurized fermentation.  Ferment in a 5 or 10 gallon corny keg and use your Spunding Valve instead of an airlock.  This allows you to ferment at your desired pressure.
  • Dry hop under pressure.  This allows you to dry hop earlier while reducing oxygenation.  Active yeast are more likely to metabolize oxygen that’s introduced during dry hopping during active fermentation.  Since CO2 is not exiting beer as vigorously under pressure, wanted compounds, flavors and aromas are more likely to stay in your beer under pressure.
  • Naturally and accurately carbonate beer right in the keg.
  • An airlock replacement.  Keep the valve wide open for non-pressurized fermentations.  Only do this if you have plenty of head space.  This wouldn’t make a great blow off tube.
  • Keg to keg transfers.  Use the Spunding Valve to allow excess gas to exit the receiving keg as you transfer under pressure.  Helps you achieve a slow, controlled and pressurized transfer.
  • Fix over-carbonated beers.
  • Test for keg leaks.  Pressurize your keg to serving pressure.  Put the Spunding Valve on (with the pressure set well above your serving PSI) and note the reading.  The gauge should remain steady.  If pressure drops, you know you have a keg leak.  The digital build, see below, is especially helpful for this task,  The digital gauge reads with .1 PSI resolution making pressure changes easy to spot.  It’s worth noting that this checks the entire keg including gas body o-ring.  That spot is hard to check and other way as it’s only in function when the gas QD is on.  When the gas QD is on… it’s difficult to spray and check for bubbles underneath the gas QD.  Thanks to Scott Janish for this tip!
  • As an airlock for long term aging of beers.  Airlocks can run dry over time.  A Spunding Valve will not.
  • Utilize CO2 from fermentation for flushing kegs and fermenters.

Continue reading →