Category Archives: Pumps

High Temp, Food Grade Stainless Steel Homebrew Pump

 

110V Magnetic Home Brewing System Beer Pump, Food Grade Stainless Steel Head with 1/2'' NPT Thread, Advanced High Temperature Resistance System Pump (Stainless Steel Head)

110V Magnetic Home Brewing System Beer Pump, Food Grade Stainless Steel Head with 1/2” NPT Thread, Advanced High Temperature Resistance System Pump (Stainless Steel Head)

More Info
Highlighted Features
  • Specifications -- 1/2 inch Inlet & Outlet; 110V/60Hz; 10W rated power; with 19 LPM (5 GPM) max flow rate, our beer pump can lift max 3.4 m (10 ft).
  • Food Grade Stainless Steel -- Magnetic pump head with 1/2 inch Thread is made of Food grade 304 stainless steel, High resistance to corrosion, Not easy to get dirty, Non-toxic, Environmentally friendly, Lasting brewing pump
  • No Leak, Good Sealing -- Pump shaft is a closed static seal, Splash proof, Greatly avoiding liquid leakage and Achieving excellent sealing, Easier to prime, Amazing liquid circulation beer pump
  • No Noise, Quiet Operation -- Main shaft is separated from the impeller, with damping and anti-Vibration function, Reducing the influence of motor vibration on the pump, Low power consumption, High efficiency,Run smoothly, Excellent Repeatable magnetic pump
  • Easy to Use --- Prime by running liquid through pump prior to turning on; The liquid travels from the bottom of the valve into the pump, and once device is powered on (plugged in to outlet), the propeller circulates liquid for maximum flow; Use to dispense beer, treat water, transfer hot water from your kettle to a mash tun, or recirculate mash wort and sparge and transfer to a brew kettle
Learn More

 

110V Magnetic Home Brewing System Beer Pump, Food Grade Stainless Steel Head with 1/2” NPT Thread, Advanced High Temperature Resistance System Pump (Stainless Steel Head) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Announcing: Chugger X-Dry Series TRI-CLAMP Pump!

X-Dry Series Tri-Clamp Chugger Pump (Inline) - Stainless Steel H335

X-Dry Series Tri-Clamp Chugger Pump (Inline) – Stainless Steel from MoreBeer

More Info

From the product description, check product page for current description, price and availability:

Introducing the X-Dry Series Chugger Pumps! These pumps offer the same great quality we’ve come to expect from Chugger, but now feature Run-Dry Protection. Although the Chugger still needs to be primed before each use, the X-Dry Series offers a new level of protection from damage due to cavitation.

The Chugger lineup of pumps represents a great value for an even better price. These pumps are workhorses in the brewery. Featuring a robust flow rate of 7 gpm, and a magnetic drive designed to handle back-pressure, these pumps are a great addition to any brewing setup! The Stainless Steel Chugger showcases their molded Stainless Steel Pump Head. This stainless pump is a steal for the price, and we’ve been more than happy with the quality! Use this to ease transfers between kettles, cool wort via a counterflow chiller, or recirculate icewater for quicker chilling!

The Chugger pump model has 1.5″ tri-clamp inlet and outlet, allowing easy integration with your T.C. kettles or fermenter! We recommend setting these pumps up with a butterfly valve on the outflow side, this way you can throttle down the outgoing flow rate, allowing for more efficient sparges or cooling! The pump head can also be rotated 360° (in 90° intervals) allowing for even more customization!

Features:

  • Run Dry Carbon Bearing
  • Stainless Steel Inline Pump Head
  • Food Grade up to 250° F
  • 1.5″ tri-clamp inlet and outlet
  • High Flow rate of 7 gpm
  • Max Head 18.6 ft
  • 115v 55″ cord and plug attached
  • 50/60 Hz, 1.4 amp
  • 1/20 HP, 3500 RPM

Note: When using silicone tubing, we recommend using a slighlty larger barb than the I.D. of the tubing. This is because silicone tubing tends to have greater pliability than most tubing. For example, when using 1/2″ silicone tubing, we recommend our 5/8″ barb (H620), to help ensure a better seal!

 

X-Dry Series Tri-Clamp Chugger Pump (Inline) – Stainless Steel H335

If you already own a March or Chugger Pump and would like to convert it, consider…. Hands on Review: Blichmann Engineering Riptide Brewing Pump Upgrade Kit – Upgrade Your March or Chugger Pump

Related:

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

15% + 10% Off ProFlow Dynamics Homebrew Gear – Disconnects, Fittings, Pumps, False Bottoms, Kettle Screens, Hop Filters, Pickups & More

Proflow Dynamics has an extensive selection of homebrew gear, fittings and disconnects anchored by their lineup of Stainless Steel Camlock QDs.

More About ProFlow Dynamics

 

Stacking Deals!

  • Generally Great Prices: ProFlow already has generally great prices.  Some of the best everyday prices for fittings, QDs, ball locks & more
  • 15% Off Coupon: BREW15% takes an additional 15% off their lineup of homebrewing gear.
  • Another 10% Off: Using any link in this post will save you another 10%!

ProFlow’s Homebrew Lineup << Use this link for 10% off + promo code BREW15% for another 15%

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. pst:pfdsale

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

20%+10% Off Pumps at PFD for Black Friday! + Blichmann Engineering Riptide Review

Proflow Dynamics has an extensive selection of homebrew gear, fittings and disconnects anchored by their lineup of Stainless Steel Camlock QDs.

More About ProFlow Dynamics

 

  • For a limited time PFD is discounting everything by 20% as a Black Friday Sale.  Use promo code BF20%. You get another 10% off by using the link below.  That figures out to about 28% off.  Considering their already, generally, great everyday prices, this is an outstanding deal!
  • ANOTHER 10% Off: You get another 10% off by using any of the links in this post.  Discount reflected at checkout
  • Shipping is an additional cost based on your location.  Because of minimum shipping costs, it may make sense to place a larger order.  Additional items may ship for minimal cost.

ProFlow’s Homebrew Lineup – Sale Items – remember coupon code BF20% + any link in this post for ANOTHER 10% off

Homebrew Pumps @ PFD – RIP TIDE PUMP

Related: Hands on Review: Blichmann Engineering Riptide Homebrew Pump

Also: Homebrew Pump Discounts, Deals and Resources

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

MoreBeer Stainless Steel Inline Thermometer w/Disconnects – $51.99 + Hands on Review, Limited Availability

morebeer inline stainless thermometer

Inline stainless thermometer from MoreBeer

More Info

From the product description, check product page for current description, price and availability:

You likely want to monitor the temperature of your wort as it moves from the chiller to the fermenter, and now you can do just that with this In-Line Thermometer. This high quality thermometer features stainless steel quick disconnects for easy installation in line with the rest of your brewing system, and many users install it on the “out” side of their convoluted heat exchangers and counterflow chillers.

As the wort runs through the body of the in-line thermometer it runs across the 2-inch thermometer probe, giving an instant and incredibly accurate reading of its exact temperature. Ryan Barto, our Fulfillment Operations Manager and also the thermometer’s inventor, says that this handy device will help you to keep better control of your mash temperatures, and makes it easier to transfer your wort to your conical through the counterflow chiller.

 

Limited Availability Deal of the Day: As of this posting, this is marked down to $51.99 as a MoreBeer Deal of the Day. Shipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

I own this thermometer.  Check out my Hands on Review.

In-Line Thermometer (With Stainless Quick Disconnects) WC420

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

15% Off Chugger Pumps!

For a short time Beer & Wine Hobby is discounting most things by 15% when you use coupon code VETERAN.  Some exceptions, listed on the sale page.  Free shipping is also in play on many orders of $39 or more to US addresses.

Save 15% at Beer & Wine Hobby for Veteran’s Days

This DOES apply to Chugger Pumps.  Chugger Pumps also quality for free shipping!  This means pumps start at just $93.47.

Related:

Hands on Review: Chugger Pumps X-Dry Series Homebrew Pump!

Also: Great Deals at Beer and Wine Hobby

Check sale or product page for current availability & pricing


pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Price, promotions and availability can change quickly.  Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this post was published; however, they may differ from those you see when you visit the product page.  Check the product page for current price, description and availability

Mark II 25 Watt Wort Pump – $39.99! via William’s Brewing Black Friday Sale!

Mark II 25 Watt Wort Pump

Mark II 25 Watt Wort Pump from William’s Brewing

More Info

From the product description, check product page for current description, price and availability:

The MKII Pump from Keg Land is a magnetic drive high temperature pump capable of pumping hot wort at temperatures of up to 248° F. It can pump up to 5 gallons per minute, making it perfect for 5 to 20 gallon systems. The maximum height it can pump is 11’ although gallons per minute will be reduced at higher pumping elevations.

The pump head and impeller are constructed of food grade Xarec plastic (very similar to Polysulphone). The magnetic drive acts as a clutch allowing the user to put back pressure on the pump to slow down flow. Like all magnetic drive wort pumps, it is not self priming – you must flood the pump head before turning on the pump. The pump has ½” BSP male fittings on the inlet and outlet, which are compatible with all our ½” female NPT fittings. The inlet is in the center. Besides Xarec plastic, other wetted interior materials are nitrile rubber and stainless steel.

The magnetic drive ensures no lubricated bearings are in contact with the liquid at all, so you can be sure there is no chance of any contamination of the liquid being pumped. The pump features a 67” power cord, and a mounting plate for permanent mounting. The pump is 7¾” in overall length, and 3¼” wide including the mounting plate. The polysulfone head can be mounted at any angle on the pump to fit your application (an optional stainless head, William’s item Q80, is also available). Shop around and compare, we think this is the best value currently available in a high temperature wort transfer pump.

Important Safety Notice: This pump, like all 110 volt items that run in potentially wet areas, should be plugged into a GFI protected outlet for safety.

 

Mark II 25 Watt Wort Pump

Stainless Steel Head Upgrade

Also at William’s Brewing: Mark II 65 Watt Wort Pump

Check sale or product page for current availability & pricing


This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:wmsmii25pump

15% Off Chugger Pumps!

For a short time Beer & Wine Hobby is discounting most things by 15% when you use coupon code VETERAN.  Some exceptions, listed on the sale page.  Free shipping is also in play on many orders of $39 or more to US addresses.

Save 15% at Beer & Wine Hobby for Veteran’s Days

This DOES apply to Chugger Pumps.  Chugger Pumps also quality for free shipping!  This means pumps start at just $93.47.

Related:

Hands on Review: Chugger Pumps X-Dry Series Homebrew Pump!

Also: Great Deals at Beer and Wine Hobby

Check sale or product page for current availability & pricing


pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

beer-wine.com Coupons – Beer & Wine Hobby – Deals, Discounts and Coupons!

Price, promotions and availability can change quickly.  Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this post was published; however, they may differ from those you see when you visit the product page.  Check the product page for current price, description and availability

Mk II Stainless Steel Brewing Pump – $76.49 w/stacking deals + Hands on Review

Mark II Beer Pump

Proflow Dynamics has an extensive selection of homebrew gear, fittings and disconnects anchored by their lineup of Stainless Steel Camlock QDs.

More About ProFlow Dynamics

 

Mark II Beer Pump via Proflow Dynamics

More Info

From the product description, check product page for current description, price and availability:

MK II High Temperature Magnetic Drive Pump

  • Stainless Steel Head
  • 110V/60HZ
  • 3.4 meter max head
  • 5 GPM (19L max flow)
  • Max temperature 248 F/ 120 C
  • Water resistant casing
  • 25 Watt Wort Pump
  • 1/2 inch fittings

The MK 11 Magnetic Drive Pump is constructed using food-grade materials and handles boiling wort with ease.  The magnetic drive functions like a clutch allowing one to slow the flow rate down by putting back pressure on the pump.  Since it is centrifugal, it’s not self priming, you must put the pump under the level of the liquid source.  This magnetic driven pump allows you to brew with confidence knowing that no contamination will occur from lubricated bearing potentially coming into contact with your liquid (beer).

 

  • As of this posting, PFD has this for $99.99.
  • 10% Off! Promo code BREW15% gets you 10% off PFD’s entire homebrew lineup
  • ANOTHER 10% Off: You get another 10% off by using any of the links in this post.  Discount reflected at checkout
  • The stacking deals make this pump $76.49.
  • Shipping is an additional cost based on your location.  Because of minimum shipping costs, it may make sense to place a larger order.  Additional items may ship for minimal cost.
  • Also: Hands on Review: Mark II Homebrew Pump w/Stainless Head

MK II Brewing Pump – remember coupon code BREW15% + any link in this post for ANOTHER 10% off

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Price, promotions and availability can change quickly. Check the product page for current price, description and availability prod:pfdmkii

DCT Foot Operated On Off Switch Foot Pedal Switch [Pump Operation]

DCT Foot Operated On Off Switch Foot Pedal Switch – 115V 15A Woodworking and Sewing Machine Foot Pedal Control Switch

More Info

From the product description, check product page for current description, price and availability:

  • POWER CONTROL FOOT SWITCH: Use the DCT Electric Foot Switch Pedal to activate your woodworking tools, power tools, printing tools, sewing machines, tattoo guns, textile tools, and other crafting tools while keeping your hands free
  • HANDS-FREE OPERATION: Improve safety and control by using this hands-free electric foot pedal switch on off foot switch; Easily start and stop power tools with this foot activated on off switch; Provides continuous power until turned off
  • COMPATIBLE WITH YOUR POWER TOOLS: Works with your router, sander, drill press, wood lathe, meat grinder, or other 15 amp power tools and machines (not included); Compatible with variable speed equipment (15 amp foot switch does not allow for speed control)
  • EASY TO USE: Plug the attached 3 prong power cord into a 115 volt grounded outlet, then plug your tool into the 3-prong receptacle on the base of the foot control on off switch; Push the electric pedal forward for power output, then push again to shut off the power
  • DURABLE CONSTRUCTION: Plastic texturized pedal top provides maximum durability and foot grip, while the 4-foot (1.2m) long power cord allows for versatile use anywhere; 6 x 3.5 inch (15.2 x 8.9cm) tattoo foot pedal electric switch tapers in height from 1.25 to 2.75 inch (3.2 to 7cm)

 

I use an on/off foot pedal foot switch (different model, manufacturer and specs) for hands free control of my March Pump while brewing.  One foot press turns the pump on or off. Other possible applications could be to control a keg washer or draft line cleaning pump.  Always use caution when using your pump with hot liquids.  Likewise use caution when using electricity around liquids.  Hot liquids and electricity can be dangerous.  Always read and follow manufacturer directions.

DCT Foot Operated On Off Switch Foot Pedal Switch – 115V 15A Woodworking and Sewing Machine Foot Pedal Control Switch – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also: Build A Recirculating Draft Line Cleaning Pump | Hands On Review: Mark’s Keg and Carboy Washer

Using a Pedal Foot Switch for Easy Pump Operation

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

MoreBeer Stainless Steel Inline Thermometer w/Disconnects – $51.99 + Hands on Review, Limited Availability

morebeer inline stainless thermometer

Inline stainless thermometer from MoreBeer

More Info

From the product description, check product page for current description, price and availability:

You likely want to monitor the temperature of your wort as it moves from the chiller to the fermenter, and now you can do just that with this In-Line Thermometer. This high quality thermometer features stainless steel quick disconnects for easy installation in line with the rest of your brewing system, and many users install it on the “out” side of their convoluted heat exchangers and counterflow chillers.

As the wort runs through the body of the in-line thermometer it runs across the 2-inch thermometer probe, giving an instant and incredibly accurate reading of its exact temperature. Ryan Barto, our Fulfillment Operations Manager and also the thermometer’s inventor, says that this handy device will help you to keep better control of your mash temperatures, and makes it easier to transfer your wort to your conical through the counterflow chiller.

 

Limited Availability Deal of the Day: As of this posting, this is marked down to $51.99 as a MoreBeer Deal of the Day. Shipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

I own this thermometer.  Check out my Hands on Review.

In-Line Thermometer (With Stainless Quick Disconnects) WC420

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

10%+10% Off ProFlow Dynamics Homebrew Gear – Disconnects, Fittings, Pumps, False Bottoms, Kettle Screens, Hop Filters, Pickups & More

proflow dynamics homebrew sale

Proflow Dynamics has an extensive selection of homebrew gear, fittings and disconnects anchored by their lineup of Stainless Steel Camlock QDs.

More About ProFlow Dynamics

 

Stacking Deals!

  • 10% Off! Promo code BREW10 gets you 10% off PFD’s entire homebrew lineup
  • ANOTHER 10% Off: You get another 10% off by using any of the links in this post.  Discount reflected at checkout
  • Shipping is an additional cost based on your location.  Because of minimum shipping costs, it may make sense to place a larger order.  Additional items may ship for minimal cost.

ProFlow’s Homebrew Lineup – remember coupon code BREW10 + any link in this post for ANOTHER 10% off

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Price, promotions and availability can change quickly.  Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this post was published; however, they may differ from those you see when you visit the product page.  Check the product page for current price, description and availability

pst:pfdsale

Self-Priming Shurflo Diaphragm Pump – $144.99, Save $25 + Free Shipping, Limited Availability

Self-Priming Shurflo Diaphragm Pump H305
Self-Priming Shurflo Diaphragm Pump

More Info

From the product description, check product page for current description, price and availability:

The ultimate pump for home winemaking use. Self-priming (will push air) so that it can draw out of a tank. Gentle diaphram action so as to not “beat up” the wine. Made of food-grade, NSF approved, materials polypropylene and santoprene, so no metallic interaction with wine. Pumps 3 gallons per minute. Flow can be restricted with an inline valve positioned on the outflow side. Self-regulating motor is designed to temporarily shut down, and then turn back on, when restriction pressure exceeds pump capacity. Has a heat limitation of 125 degrees Fahrenheit so cannot be used in brewing applications.

Pump is equipped with 1/2″ Male NPT posts on the inlet and outlet. Does not include the plastic barb fittings you will need to purchase separately. Please see the “You Might Also Need” section below for our recommendations regarding which fittings to attach to the pump.

Please Note: The diaphragms in this pump are very sensitive to sediment and particulates and can be damaged if any solids are taken into the pump head. We recommend using an Inline Pre-Filter (FIL26) if you think there’s a risk of sucking up solids with your inlet hose (pumping during pressing, for instance).

Technical Specifications

PUMP DESIGN: Positive Displacement 3 Chamber Diaphragm Pump
CHECK VALVE: (1-Way Operation) Prevents Reverse Flow
CAM: 3.0 Degree
MOTOR: Permanent Magnet, P/N 11-195-01, Thermally Protected
VOLTAGE: 115 VAC Nominal
PRESSURE SWITCH: Factory Set @ 45 PSI Shut-Off, Turn On 25 5 PSI
LIQUID TEMPERATURE: 130 Degrees Fahrenheit (54 Degrees Centigrade) Max.
PRIME: Self-Priming Up To 9.0 Ft. Vertical, Max. Inlet Pressure 30 PSI (2.1 Bar)
PORTS: 1/2″ – 14 Male Parallel Thread
Materials:

PLASTICS- Polypropylene
VALVES- Santoprene
DIAPHRAGM – Santoprene
FASTENERS- Zinc Plated Steel
NET WEIGHT: 5.3 Lbs (2.4 Kg)
APPROVALS: UL, C-UL Listed, N.S.F. Listed

 

Winexpert Vintner’s Reserve Chardonnay Wine Recipe Kit.  About: “The perennial white wine favorite. A remarkably versatile wine, this classic now includes oak for a rounded vanilla-oak structure that is smooth and appealing. Dry, with pleasant acidity, Chardonnay’s complexity is fully realized when aged.”

Limited Availability Wine Deal of the Week:  As of this posting, this is marked down to $144.99 as a MoreWine Deal of the Week.  Shipping is also free to addresses in the contiguous US with most $59 Orders.  Quantities are limited. Check the Deal of the Week section – Here – to see if this is still available.

Note that you can redeem this on MoreBeer or MoreWine.  Use coupon code WINEDEAL to get this discount.

Self-Priming Shurflo Diaphragm Pump H305

Tip: MoreBeer, MoreWine and MoreCoffee Combined Cart & Promotions

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

DCT Foot Operated On Off Switch Foot Pedal Switch [Pump Operation]

DCT Foot Operated On Off Switch Foot Pedal Switch – 115V 15A Woodworking and Sewing Machine Foot Pedal Control Switch

More Info

From the product description, check product page for current description, price and availability:

  • POWER CONTROL FOOT SWITCH: Use the DCT Electric Foot Switch Pedal to activate your woodworking tools, power tools, printing tools, sewing machines, tattoo guns, textile tools, and other crafting tools while keeping your hands free
  • HANDS-FREE OPERATION: Improve safety and control by using this hands-free electric foot pedal switch on off foot switch; Easily start and stop power tools with this foot activated on off switch; Provides continuous power until turned off
  • COMPATIBLE WITH YOUR POWER TOOLS: Works with your router, sander, drill press, wood lathe, meat grinder, or other 15 amp power tools and machines (not included); Compatible with variable speed equipment (15 amp foot switch does not allow for speed control)
  • EASY TO USE: Plug the attached 3 prong power cord into a 115 volt grounded outlet, then plug your tool into the 3-prong receptacle on the base of the foot control on off switch; Push the electric pedal forward for power output, then push again to shut off the power
  • DURABLE CONSTRUCTION: Plastic texturized pedal top provides maximum durability and foot grip, while the 4-foot (1.2m) long power cord allows for versatile use anywhere; 6 x 3.5 inch (15.2 x 8.9cm) tattoo foot pedal electric switch tapers in height from 1.25 to 2.75 inch (3.2 to 7cm)

 

I use an on/off foot pedal foot switch (different model, manufacturer and specs) for hands free control of my March Pump while brewing.  One foot press turns the pump on or off. Other possible applications could be to control a keg washer or draft line cleaning pump.  Always use caution when using your pump with hot liquids.  Likewise use caution when using electricity around liquids.  Hot liquids and electricity can be dangerous.  Always read and follow manufacturer directions.

DCT Foot Operated On Off Switch Foot Pedal Switch – 115V 15A Woodworking and Sewing Machine Foot Pedal Control Switch – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also: Build A Recirculating Draft Line Cleaning Pump | Hands On Review: Mark’s Keg and Carboy Washer

Using a Pedal Foot Switch for Easy Pump Operation

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

Announcing: The Super Sucker Transfer Pump!

Super Sucker Transfer Pump PMP700

Super Sucker Transfer Pump via MoreBeer

From the hop description, check product page for current description, price and availability:

  • Transfer beer or wine between vessels without the hassle of starting a siphon
  • Place your receiving vessel side-by-side or even above the transferring vessel
  • Perfect for transferring between primary and secondary fermenter, or from fermenter to bottling bucket or keg
  • Eliminate excess oxygen exposure caused by hand-pumping or blowing into a carboy hood to start a siphon

The Super Sucker transfer pump is the quickest, most hassle-free solution to moving beer or wine between vessels. Rack from primary fermenter to secondary or from carboy to keg without the excess oxygen exposure that results from hand-pumping a siphon or blowing into a carboy hood. Simply run transfer tubing from a racking cane to the pump and then to your receiving vessel, flip the switch, and let the Super Sucker do the work while you kick back and enjoy a cold beverage.

With the Super Sucker you don’t need gravity or CO2 pressure to move liquid around. Thanks to the pump’s considerable max lift height, you can leave your heavy, full fermenter on the ground and place the receiving keg or carboy side-by-side or even above the fermenter on a countertop.

The 10 mm barbed inlet and outlet are perfect for use with 3/8″ ID tubing. We recommend using our Racking Cane Siphon Kit plus 5 ft. of 3/8″ vinyl tubing. Secure pump connections with butterfly hose clamps for easy set up and break down.

Features:

  • Self-Priming
  • 10 mm Barbed Inlet/Outlet
  • On/Off Switch
  • Max Flow: 1.12 Gal/min
  • Suction: 5 in.
  • Max Lift: 150 in. (12.5 ft.)
  • Maximum Temperature: 140°F
  • Pressure: 90 psi
  • Voltage: 12V DC (3.5A)

Super Sucker Transfer Pump PMP700

Homebrew Pump Reviews

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Prices, shipping and availability can change quickly. Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this post was published; however, they may differ from those you see when you visit the product page. Check the product page for current price, description and availability.

Lightobject Mini Food Grade, High Temp Water Pump

Lightobject EWP-2502HT6V High Temperature(100°C) Mini DC6V Water Pump, Food Grade, Sous Vide, 15 GPH

Lightobject EWP-2502HT6V High Temperature(100°C) Mini DC6V Water Pump, Food Grade, Sous Vide, 15 GPH

More Info

From the product description, check product page for current description, price and availability:

  • This is a high temperature (up to 105’C) Food grade mini water pump
  • The shaft is coated with a layer of ZrO2 (zirconium oxide ) for higher temperature handling and better tolerance for acid and alkaline
  • Made in China

This is a high temperature (up to 105’C) Food grade mini water pump. The shaft is coated with a layer of ZrO2 (zirconium oxide ) for higher temperature handling and better tolerance for acid and alkaline. It’s built by a brushless motor providing smooth and quiet operation than a non-brushless water pump. Plus, it will not generate ‘electric spark’ like what a brush type does so it’s more safe. It can be used to pump oil as well (no gasoline*) Specification: Input: DC 5~6V Output: 1.0L/min or 0.264 gallon/min Range: 1M (3ft horizon) @6V Current: 300mA@6V Intake: 0.35in Dia. Outlet: 0.27in Dia. Life span: 6V @ 1600rpm~4200rpm Noise:20dB Working Temp: 212’F (non-submersed) : less than 122’F(submersed) Size(L*W*D): 1.3″ X 0.9″ X 1.4″ Weight (net): 2.0oz Warning: Do not let it run dry without water flow!.

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

If you’re looking for a small pump to include in your system build or project.  In my opinion this is not a direct one to one replacement for something like a Chugger Pump or a March Pump the flow rate isn’t there and the inlet and outlets look small. I do see some possible homebrewing applications including… Transferring wort, mash or sparge water within your system, recirculating mash to help keep a consistent temperature and recirculating wort for chilling.  Note that this is 6V DC.  You need to wire this up to a compatible power supply.

Lightobject EWP-2502HT6V High Temperature(100°C) Mini DC6V Water Pump, Food Grade, Sous Vide, 15 GPH

Pump Reviews!

Related:  All Grain Tips & Gear | Homebrew Pump Discounts, Deals and Resources

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Mk II Stainless Steel Brewing Pump – $76.49 w/stacking deals + Hands on Review

Mark II Beer Pump

Proflow Dynamics has an extensive selection of homebrew gear, fittings and disconnects anchored by their lineup of Stainless Steel Camlock QDs.

More About ProFlow Dynamics

 

Mark II Beer Pump via Proflow Dynamics

More Info

From the product description, check product page for current description, price and availability:

MK II High Temperature Magnetic Drive Pump

  • Stainless Steel Head
  • 110V/60HZ
  • 3.4 meter max head
  • 5 GPM (19L max flow)
  • Max temperature 248 F/ 120 C
  • Water resistant casing
  • 25 Watt Wort Pump
  • 1/2 inch fittings

The MK 11 Magnetic Drive Pump is constructed using food-grade materials and handles boiling wort with ease.  The magnetic drive functions like a clutch allowing one to slow the flow rate down by putting back pressure on the pump.  Since it is centrifugal, it’s not self priming, you must put the pump under the level of the liquid source.  This magnetic driven pump allows you to brew with confidence knowing that no contamination will occur from lubricated bearing potentially coming into contact with your liquid (beer).

 

  • As of this posting, PFD has this for $99.99.
  • 10% Off! Promo code BREW15% gets you 10% off PFD’s entire homebrew lineup
  • ANOTHER 10% Off: You get another 10% off by using any of the links in this post.  Discount reflected at checkout
  • The stacking deals make this pump $76.49.
  • Shipping is an additional cost based on your location.  Because of minimum shipping costs, it may make sense to place a larger order.  Additional items may ship for minimal cost.
  • Also: Hands on Review: Mark II Homebrew Pump w/Stainless Head

MK II Brewing Pump – remember coupon code BREW15% + any link in this post for ANOTHER 10% off

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Price, promotions and availability can change quickly. Check the product page for current price, description and availability prod:pfdmkii

Kegland Mark II 25 Watt Wort Pump – $59.99 + Get a Freebie

Mark II 25 Watt Wort Pump

Mark II 25 Watt Wort Pump from William’s Brewing

More Info

From the product description, check product page for current description, price and availability:

The MKII Pump from Keg Land is a magnetic drive high temperature pump capable of pumping hot wort at temperatures of up to 248° F. It can pump up to 5 gallons per minute, making it perfect for 5 to 20 gallon systems. The maximum height it can pump is 11’ although gallons per minute will be reduced at higher pumping elevations.

The pump head and impeller are constructed of food grade Xarec plastic (very similar to Polysulphone). The magnetic drive acts as a clutch allowing the user to put back pressure on the pump to slow down flow. Like all magnetic drive wort pumps, it is not self priming – you must flood the pump head before turning on the pump. The pump has ½” BSP male fittings on the inlet and outlet, which are compatible with all our ½” female NPT fittings. The inlet is in the center. Besides Xarec plastic, other wetted interior materials are nitrile rubber and stainless steel.

The magnetic drive ensures no lubricated bearings are in contact with the liquid at all, so you can be sure there is no chance of any contamination of the liquid being pumped. The pump features a 67” power cord, and a mounting plate for permanent mounting. The pump is 7¾” in overall length, and 3¼” wide including the mounting plate. The polysulfone head can be mounted at any angle on the pump to fit your application (an optional stainless head, William’s item Q80, is also available). Shop around and compare, we think this is the best value currently available in a high temperature wort transfer pump.

Important Safety Notice: This pump, like all 110 volt items that run in potentially wet areas, should be plugged into a GFI protected outlet for safety.

 

Mark II 25 Watt Wort Pump

Stainless Steel Head Upgrade

Also at William’s Brewing: Mark II 65 Watt Wort Pump

Check sale or product page for current availability & pricing


This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:wmsmii25pump

Topsflo TD5 Beer Pump – $119.99, Save $50 + free shipping

Topsflo TD5 homebrewing pump from MoreBeer.

More Info

From the product description, check product page for current description, price and availability:

This 24v magnetic drive brewing pump is very compact, super quite, safe to use around liquids, and integrates well with electric brewing systems. It has plenty of power, with a max flow rate of 6.4gpm – perfect for recirculating wort in an all grain brewing set up. With the included power adapter, the pump runs on 24 v making it safer around liquids. The pump is light enough that, with the provided rubber mounting bracket, it can be mounted almost anywhere. The head is made from 304 stainless steel. Brew quieter and brew easier, with the Topsflo TD5 Micro Pump.

This is the exact same pump sold by other retailers under brand names such as Steelhead™ and Wort Hog™. Topsflo is the actual manufacturer of this pump. Since we buy direct and do not add custom packaging we are able to sell the same pump for less. We also include a silicone mounting bracket at no additional cost.

  • Made from food grade stainless steel
  • 120 to 24 volt power adapter
  • 1/2 in NPT inlet and outlet
  • Works with high temperatures (110 C/ 230 F)
  • Max flow rate of 6.4 gpm
  • Max head of 19 ft
  • Small compact design
  • Automatic over voltage shutoff
  • Comes with mounting bracket

 

Topsflo TD5 Beer Pump PMP155

Price, promotions and availability can change quickly.  Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this this post was published; however, they may differ from those you see when you visit the product page.  Check the product page for current price, description and availability.

Related: Homebrew Pump Discounts, Deals and Resources

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

DCT Foot Operated On Off Switch Foot Pedal Switch [Pump Operation]

DCT Foot Operated On Off Switch Foot Pedal Switch – 115V 15A Woodworking and Sewing Machine Foot Pedal Control Switch

More Info

From the product description, check product page for current description, price and availability:

  • POWER CONTROL FOOT SWITCH: Use the DCT Electric Foot Switch Pedal to activate your woodworking tools, power tools, printing tools, sewing machines, tattoo guns, textile tools, and other crafting tools while keeping your hands free
  • HANDS-FREE OPERATION: Improve safety and control by using this hands-free electric foot pedal switch on off foot switch; Easily start and stop power tools with this foot activated on off switch; Provides continuous power until turned off
  • COMPATIBLE WITH YOUR POWER TOOLS: Works with your router, sander, drill press, wood lathe, meat grinder, or other 15 amp power tools and machines (not included); Compatible with variable speed equipment (15 amp foot switch does not allow for speed control)
  • EASY TO USE: Plug the attached 3 prong power cord into a 115 volt grounded outlet, then plug your tool into the 3-prong receptacle on the base of the foot control on off switch; Push the electric pedal forward for power output, then push again to shut off the power
  • DURABLE CONSTRUCTION: Plastic texturized pedal top provides maximum durability and foot grip, while the 4-foot (1.2m) long power cord allows for versatile use anywhere; 6 x 3.5 inch (15.2 x 8.9cm) tattoo foot pedal electric switch tapers in height from 1.25 to 2.75 inch (3.2 to 7cm)

 

I use an on/off foot pedal foot switch (different model, manufacturer and specs) for hands free control of my March Pump while brewing.  One foot press turns the pump on or off. Other possible applications could be to control a keg washer or draft line cleaning pump.  Always use caution when using your pump with hot liquids.  Likewise use caution when using electricity around liquids.  Hot liquids and electricity can be dangerous.  Always read and follow manufacturer directions.

DCT Foot Operated On Off Switch Foot Pedal Switch – 115V 15A Woodworking and Sewing Machine Foot Pedal Control Switch – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also: Build A Recirculating Draft Line Cleaning Pump | Hands On Review: Mark’s Keg and Carboy Washer

Using a Pedal Foot Switch for Easy Pump Operation

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.