From the product description, check product page for current description, price and availability:
Siphon Tube Hose Holder
Can hold up to 1/2″ hosing
Clamps down on the wall of the transfer vessel for secure hose positioning
K&B Beer Siphon Transfer Tube Hose Holder – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
“Give your well crafted home brew the respect it deserves and say bye, bye, plastic!
Transfer flawlessly every time with the worlds only 304 Stainless Steel and High Temperature Silicone auto siphon.
With dramatically increased flow rates, absolutely no air bleeds, simple break down and superior sanitation potential we’re confident this will be the last transfer tool you’ll ever need.
Don’t wait till your next batch, get one today!”
As of this posting, coupon code BREWFORCE takes a whopping 30% off the BrewSSSiphon and accessories. Check BrewSSSential for current availability.
Check sale or product page for current availability & pricing
pinned
This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
From the product description, check product page for current description, price and availability:
No more struggling with different techniques to get a siphon started! Get an Easy Siphon and you won’t have to worry about it anymore; one pump and the siphon is running. Talk about Easy!
Comes with 3/8″ cane. 22″ Long by 1″ diameter. 3/8″ tubing must be purchased separately.
Instructions:
Sanitize and rinse your Easy-Siphon.
Get the inner tube gasket and the outer tube wet.
Attach the curved siphon to a hose.
Submerge the end of Easy-Siphon into your container.
If bottling directly, attach the correct bottle for the tubing you are using and place it inside your bottle wand. Otherwise place the the tubing into the container you’re racking to.
Pull the inner tube up about 7″ until the liquid fills the tube.
Pump the inner tube down and siphon will begin.
Pull out inner tube and sanitize Easy-Siphon for storage.
Limited Availability Wine Deal of the Week: As of this posting, this is marked down to $8.99 as a MoreWine Deal of the Week. Shipping is also free to addresses in the contiguous US with most $59 Orders. Quantities are limited. Check the Deal of the Week section – Here – to see if this is still available.
Note that you can redeem this on MoreBeeror MoreWine. Use coupon code WINEDEAL to get this discount.
This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
From HBF: Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions.
Note from HBF: These type of filters are sometimes used as part of oxygenation or aeration setups. I’ve also used a similar filter to help start a siphon. See MoreBeer’s Sterile Siphon Starter for more info on that process. The basic idea is you use a compatible carboy hood and racking cane and blow into a compatible filter to start the flow of liquid. The filter used in MoreBeer’s setup looks similar to this one, although I’m not certain it’s identical.
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
From the product description, check product page for current description, price and availability:
No more struggling with different techniques to get a siphon started! Get an Easy Siphon and you won’t have to worry about it anymore; one pump and the siphon is running. Talk about Easy!
Comes with 1/2″ cane. 1/2″ tubing must be purchased separately. Moves more beer in less time than the 3/8” version.
Instructions:
Sanitize and rinse your Easy-Siphon.
Get the inner tube gasket and the outer tube wet.
Attach the curved siphon to a hose.
Submerge the end of Easy-Siphon into your container.
If bottling directly, attach the correct bottle for the tubing you are using and place it inside your bottle wand. Otherwise place the the tubing into the container you’re racking to.
Pull the inner tube up about 7″ until the liquid fills the tube.
Pump the inner tube down and siphon will begin.
Pull out inner tube and sanitize Easy-Siphon for storage.
Limited Availability Deal of the Day: As of this posting, this is marked down to $11.99 as a MoreBeer Deal of the Day. Shipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.
Product Description – Here– Use coupon code BEERDEAL to get this discount.
This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
pinned
amazon
Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions.
From the product description, check product page for current description, price and availability:
Siphon Tube Hose Holder
Can hold up to 1/2″ hosing
Clamps down on the wall of the transfer vessel for secure hose positioning
K&B Beer Siphon Transfer Tube Hose Holder – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
Easy Jiggler – Stainless Auto Siphon Racking Cane from MoreBeer
From the product description, check product page for current description, price and availability:
The Easy Jiggler combines the convenience of a hand-pump auto siphon with the longevity and simplicity of a stainless steel racking cane. Plastic auto siphons are easy to use, but they’re prone to cracking after heavy use and can break easily if they’re dropped on the ground. Stainless racking canes won’t break on you, but getting the siphon started is its own debacle. You either have to cap your carboy and blow through the hood, exposing your beer to oxygen, or you have to suck on the end of the hose, which isn’t exactly sanitary. Enter the jiggle siphon, the last racking cane you’ll ever own!
Made from 304 stainless steel, the Easy Jiggler will last a lifetime and can be quickly disassembled for cleaning and sanitizing. To use, simply insert the tip of the jiggler into your fermenter and give it a few long, steady strokes to begin the siphon. Once it’s going, you’ll hear the glass ball inside spinning away. To avoid disturbing the trub cake at the bottom of the fermenter, we recommend doing the jiggling action near the surface and then lower the cane once the siphon has begun.
22.5″ long
Made from 304 stainless steel
Includes 60″ length of 10mm ID silicone tubing
Limited Availability Deal of the Day: As of this posting, this is marked down to $24.99 as a MoreBeer Deal of the Day. Shipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.
Product Description – Here– Use coupon code BEERDEAL to get this discount.
This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
From HBF: Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions.
Note from HBF: These type of filters are sometimes used as part of oxygenation or aeration setups. I’ve also used a similar filter to help start a siphon. See MoreBeer’s Sterile Siphon Starter for more info on that process. The basic idea is you use a compatible carboy hood and racking cane and blow into a compatible filter to start the flow of liquid. The filter used in MoreBeer’s setup looks similar to this one, although I’m not certain it’s identical.
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
From the hop description, check product page for current description, price and availability:
Transfer beer or wine between vessels without the hassle of starting a siphon
Place your receiving vessel side-by-side or even above the transferring vessel
Perfect for transferring between primary and secondary fermenter, or from fermenter to bottling bucket or keg
Eliminate excess oxygen exposure caused by hand-pumping or blowing into a carboy hood to start a siphon
The Super Sucker transfer pump is the quickest, most hassle-free solution to moving beer or wine between vessels. Rack from primary fermenter to secondary or from carboy to keg without the excess oxygen exposure that results from hand-pumping a siphon or blowing into a carboy hood. Simply run transfer tubing from a racking cane to the pump and then to your receiving vessel, flip the switch, and let the Super Sucker do the work while you kick back and enjoy a cold beverage.
With the Super Sucker you don’t need gravity or CO2 pressure to move liquid around. Thanks to the pump’s considerable max lift height, you can leave your heavy, full fermenter on the ground and place the receiving keg or carboy side-by-side or even above the fermenter on a countertop.
The 10 mm barbed inlet and outlet are perfect for use with 3/8″ ID tubing. We recommend using our Racking Cane Siphon Kit plus 5 ft. of 3/8″ vinyl tubing. Secure pump connections with butterfly hose clamps for easy set up and break down.
Features:
Self-Priming
10 mm Barbed Inlet/Outlet
On/Off Switch
Max Flow: 1.12 Gal/min
Suction: 5 in.
Max Lift: 150 in. (12.5 ft.)
Maximum Temperature: 140°F
Pressure: 90 psi
Voltage: 12V DC (3.5A)
This just introduced pump is selling for just $59.99
This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
morebeer
Prices, shipping and availability can change quickly. Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this post was published; however, they may differ from those you see when you visit the product page. Check the product page for current price, description and availability.
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
pinned
amazon
Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions.
From HBF: Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions.
Note from HBF: These type of filters are sometimes used as part of oxygenation or aeration setups. I’ve also used a similar filter to help start a siphon. See MoreBeer’s Sterile Siphon Starter for more info on that process. The basic idea is you use a compatible carboy hood and racking cane and blow into a compatible filter to start the flow of liquid. The filter used in MoreBeer’s setup looks similar to this one, although I’m not certain it’s identical.
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
From the product description, check product page for current description, price and availability:
Siphon Tube Hose Holder
Can hold up to 1/2″ hosing
Clamps down on the wall of the transfer vessel for secure hose positioning
K&B Beer Siphon Transfer Tube Hose Holder – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
From the product description, check product page for current description, price and availability:
Detail:
*Siphon Hose with filter is a great accessory for home brew making
*Made of high quality plastic, durable in use.
*Item Condition:100% Brand New
*Material:PP Plastic
*Color:White (As Pictures Show)
*Length:about 1.9m (Approx.)
Package Contents:
1*Siphon Hose
Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
As if this posting, this is eBay offering is selling for just $6.64. Shipping is also free to many US addresses.
This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
greatdeals
Prices, shipping and availability can change quickly. Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this post was published; however, they may differ from those you see when you visit the product page. Check the product page for current price, description and availability. rp:ebaysiphonfilt
From the product description, check product page for current description, price and availability:
No more struggling with different techniques to get a siphon started! Get an Easy Siphon and you won’t have to worry about it anymore; one pump and the siphon is running. Talk about Easy!
Comes with 1/2″ cane. 1/2″ tubing must be purchased separately. Moves more beer in less time than the 3/8” version.
Instructions:
Sanitize and rinse your Easy-Siphon.
Get the inner tube gasket and the outer tube wet.
Attach the curved siphon to a hose.
Submerge the end of Easy-Siphon into your container.
If bottling directly, attach the correct bottle for the tubing you are using and place it inside your bottle wand. Otherwise place the the tubing into the container you’re racking to.
Pull the inner tube up about 7″ until the liquid fills the tube.
Pump the inner tube down and siphon will begin.
Pull out inner tube and sanitize Easy-Siphon for storage.
Limited Availability Deal of the Day: As of this posting, this is marked down to $10.99 as a MoreBeer Deal of the Day. Shipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.
Product Description – Here– Use coupon code BEERDEAL to get this discount.
This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
Easy Jiggler – Stainless Auto Siphon Racking Cane from MoreBeer
More Info
From the product description, check product page for current description, price and availability:
The Easy Jiggler combines the convenience of a hand-pump auto siphon with the longevity and simplicity of a stainless steel racking cane. Plastic auto siphons are easy to use, but they’re prone to cracking after heavy use and can break easily if they’re dropped on the ground. Stainless racking canes won’t break on you, but getting the siphon started is its own debacle. You either have to cap your carboy and blow through the hood, exposing your beer to oxygen, or you have to suck on the end of the hose, which isn’t exactly sanitary. Enter the jiggle siphon, the last racking cane you’ll ever own!
Made from 304 stainless steel, the Easy Jiggler will last a lifetime and can be quickly disassembled for cleaning and sanitizing. To use, simply insert the tip of the jiggler into your fermenter and give it a few long, steady strokes to begin the siphon. Once it’s going, you’ll hear the glass ball inside spinning away. To avoid disturbing the trub cake at the bottom of the fermenter, we recommend doing the jiggling action near the surface and then lower the cane once the siphon has begun.
22.5″ long
Made from 304 stainless steel
Includes 60″ length of 10mm ID silicone tubing
This has had some availability issues since being introduced.
As of this posting, it’s in stock for just $29.99.
Price, promotions and availability can change quickly. Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this post was published; however, they may differ from those you see when you visit the product page. Check the product page for current price, description and availability
pinned
This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
pinned
amazon
Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions.
From the product description, check product page for current description, price and availability:
Finally, a quality siphon for home brewing, distilling, and wine making. For siphoning out of a carboy, bucket or FermZilla. This siphon includes a 60″ long x 1/2″ interior diameter silicone tubing, and the stainless siphon wand itself is 22″ long. A glass ball is enclosed in the end, which combined with a stainless spring, start the siphon for you when you move it back and forth. Sucking or filling the siphon full of fluid is not required: just dip it into the fluid to be transferred, and jiggle it up and down a few times.
This whole assembly is plasticiser and BPA free and virtually unbreakable. It is made out of 304 grade stainless steel and is easy to take apart for cleaning. Easier to start than a conventional siphon but at the same time similarly simple to use and clean.
Note: Some of the pictures and the video show it with vinyl tubing, but it comes with silicone tubing. Silicone is the best because it can be used with everything from beer to hard alcohol.
INSTRUCTIONS
1: Sanitize and rinse your siphon
2: Make sure you have the full vessel significantly above the empty vessel you are filling into
3: Attach the curved siphon to the hose
4: Submerge the end of siphon into your full container.
5: With long swift strokes shake the siphone tube up and down to start the siphon action
This is selling for $29.99
In Stock at William’s Brewing: This has been sold out for a good while at MoreBeer. I noticed that William’s Brewing actually has this in stock as of this posting. Check the product page to see current status.
Price, promotions and availability can change quickly. Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this post was published; however, they may differ from those you see when you visit the product page. Check the product page for current price, description and availability
This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
pinned
amazon
Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions.
