Category Archives: Temp Control

MoreBeer’s FermWrap Fermentation Heater – $23.99, Limited Availability + free ship eligible + Use it to remove keg labels

12137

FermWrap Fermentation Heater from MoreBeer

More Info

From the product description, check product page for current description, price and availability:

Keep your yeast happy and your ferment warm during those cold winter months with this flexible heater wrap! Unlike those old heater belts, the FermWrap covers a wide area of your carboy or fermentation vessel, promoting an even heat distribution (11″ tall x 25″ wide.). Using tape to adhere, the FermWrap can be attached directly to your fermenter, or can be used to heat the space in a box (or refrigerator) that the fermenter is in. Depending on your configuration and insulation, you can increase the temperature of your ferment from 5-20 degrees Fahrenheit. This differential can be increased by using our carboy bag to insulate a carboy (this has been tested). To decrease the temperature differential, stick only a portion of the FermWrap to the fermenter.

With 40 watts of heat spread over almost two square feet it provides gentle even heating. Draws 40 watts. 115V.

For more precise results, we recommend a temp controller and carboy thermowell for the ultimate in fermentation temperature control. Or for the best control, use the dual stage control and carboy thermowell, as well as a refrigerator, to control both the high and low temps.


 

Limited Availability Deal of the Day: As of this posting, this is marked down to $23.99 as a MoreBeer Deal of the DayShipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

The FermWrap Heater FE650

Alternate Use Tip

I use a similar heat mat to help remove stubborn keg labels.  See: Removing Keg Labels… A Trick That Makes it Easy! – a section of our keg rebuild how-to

Related: Maintaining Fermentation Temps in Colder Weather

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Inkbird ITC-308 Digital Temperature Controller| Review

Inkbird ITC-308 Digital Dual Stage Temp Controller [Kegerator or Fermentation] + Hands on Review

Inkbird ITC-308 Digital Temperature Controller Outlet Thermostat 2-Stage 1100W with Sensor Reptile Beer Brewing Kegs Fridge Cured Meat Breeding Growing

ITC-308 Dual Stage, Pre-Wired Digital Temperature Controller by Inkbird

More Info


Highlighted Features
  • Plug and play design, easy to use
  • Dual relay output, be able to connect with refrigeration and heating equipment at the same time
  • Support reading with Centigrade or Fahrenheit unit
  • Maximum output load: 1100W(110V)
  • Dual display window, be able to display measured temperature and set temperature at the same time

 

This controller can control both a heating and cooling device.  Alternatively, it can control a heating or a cooling device.

Use to control fermentation or kegerator temperatures. This is a great controller. Check out my Hands on Review

Inkbird ITC-308 Digital Temperature Controller Outlet Thermostat 2-Stage 1100W with Sensor Reptile Beer Brewing Kegs Fridge Cured Meat Breeding Growing – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Yeast Starters & Fermentation | Kegerator Tips & Gear | Inkbird ITC308 Review

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

MoreBeer’s 7.5 Gallon Temp Controlled Conical, Refurbished… $1,199, Save $500!

9925

7.5 Gallon Heated and Cooled Conical from MoreBeer

More Info

from MoreBeer…

Ferment 5 gallon batches of beer in these beautiful conical fermenters, and control the temperature of your fermenting beer to within 1 degree, any time of the year! The included Dual-Stage Controller will simultaneously control both the cooling unit and the 40-Watt heater. The cooling unit mounts to the outside of the cone with no internal contact with the beer. The cooling is extremely gentle on your yeast, changing wort temperatures at about a degree an hour. It can get to and hold your ale fermentation temperatures of 65-72 Fahrenheit all the way up to ambient temps of 100 Fahrenheit. In addition, it can get to and hold lager fermentation temperatures of 48-52 Fahrenheit all the way up to ambient temperatures of 80 Fahrenheit.

The Leg Extension Option (CONP770) is needed if you wish to gravity feed into a keg. If you would like to use CO2 to push your beer into a keg, you will need the CO2 Adapter Package (CONP775).

Cooling is made to work with 5 to 6 gallon batches.  Please note that when dropping temperature, your fermenting wort will contract and may pull liquid from your blowoff bucket into the fermentor.  This may also occur when dumping trub from the bottom port, or when racking from the racking arm.

Our conicals come with amazing standard features that makes them light years beyond other conicals on the market, and combined with our new set of options, you can configure them to fit your exact brewing needs! MoreBeer! Stainless Conical Fermentors come with these great features:

  • Control the temperature of your beer, any time of the year
  • Removable foam insulation
  • 304 Stainless Steel
  • Commercial-quality gasket made from durable, food-grade silicone
  • Low profile stand design
  • 1.5 inch butterfly valve
  • Threadless racking arm with position indicator
  • Professional sanitary sample and transfer valve
  • Cone removes from stand for easy cleaning
  • Domed lid with 3 inch clover fitting at the top
  • Sturdy lid clamp allowing for 5 PSI of pressure
  • Pressure Relief welded right to the lid
  • Includes Stainless Blow Off Assembly Kit with built-in Blow Off Bucket
  • Ability to add options, like leg extensions, wheels, and more!
  • For usuage on US 110v
  • .8 amp AC
  • Dimensions: 43″ H (with Blow Off Assembly) x 18″ W

 

  • MoreBeer has a limited number of refurbished 7.5 gallon temp controller conicals available.
  • These are marked down $500 to $1,199.99.
  • Shipping is also free to many US addresses
  • Limited quantities are available, check the product page to see if you can still get in on this deal.

Refurbished: 7.5 Gallon Conical Fermenter – Heated and Cooled – Heated and Cooled

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Inkbird IPB-16s PID Temperature Controller

Inkbird 120V 15A 1800W Heating or Cooling PID Temperature Controller, Plug and Play IPB-16S Prewired Digital Home Brewing and Distillation Controller, Independent Control Pump Thermostat with 2 Plugs

More Info


Highlighted Features
  • 【Plug-n-Play Easy Operation】The electric home brewing controller is an all-in-one machine and no more installation is needed. Just plug in and set up the system according to your needs
  • 【Precise Control】PID digital controller provides accurate temperature control at the range of -50-125 Celsius / -58-257 Fahrenheit, and the accuracy of the temperature is +/- 0.1 Celsius or +/- 0.2 Fahrenheit
  • 【Independent Pump Function】The Pump Function is special designed for home brewing customers and it can be operated separately, just access your pump and press the “Pump” button when you need it
  • 【Safety】The controller with overload protection has adopted high quality metal case and aluminum cooling plate, 6.5 power cord and 2 prong plugs to ensure the safety of your electrical appliances
  • 【Working environmental temperature】-10-55 Celsius /14-131 Fahrenheit(not freezing or condensation state)

 

Inkbird Heating or Cooling PID Temperature Controller IPB-16S Pre-Wired Digital Home Brewing Controller Independent Control Pump Thermostat – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also Consider: Inkbird Dual Stage Temp Controller – Hands on Review – Inkbird Deals

Inkbird ITC-308 WiFi Digital Dual Stage Temp Controller

Inkbird ITC-308 Digital Dual Stage Temp Controller [Kegerator or Fermentation] – $28 w/20% Off Coupon



adamztop5

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Dual Stage Digital Temp Controller

Dual Stage Digital Temp Controller

More Info


 

 

diymore Digital AC 110V Temperature Controller DM-808TT Dual Outlet 10A 1200W Thermostat Heating Cooling with 2 NTC Sensor for Hatching Greenhouse Heater Home Brewing– affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

adamztop5

Inkbird ITC-310TB, Dual Stage w/12 Programmable Timers

Itc-301TB by Inkbird.  Digital Dual Stage Pre-Wired Temperature Controller with 12 Timers.

More Info

From the product description, check product page for current description, price and availability:

Highlighted Features
  • 💫💫[Multipurpose] Mainly used to control temperature during fermentation process of beer and wine brewing, also widely used in home brewing, aquarium, pet breeding, and hatching, etc.
  • 💫💫[Multiperiod] Can be set 12 different temperatures in 12 different periods of time, and the timers will start when the setpoint temperature is reached.
  • 💫💫[Large Time Range] Can be set single or cycle control mode. Wider time setting range: 1~999(min/hr), 1~90(days)
  • 💫💫[Mode & Function] Support °F/°C mode and easy to set. Alarm when over-temperature and sensor error.
  • 💫💫[Dual Relay Output & Display] Dual relay output, be able to connect with refrigeration and heating equipment at the same time. PV and SV dual display windows, be able to display measured temperature and setting temperature at the same time.

 

Dual stage means that the Itc-310TB can control both a heating and cooling device.  Alternatively, it can control a heating or a cooling device.  This controller displays in Fahrenheit and Centigrade.

Inkbird ITC-310T-B Digital Temperature Controller 12 Different Periods of Time for Mason Jar Incubator Winemaking Refrigerator Fridge Reptile – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Related: Settings Walkthrough Inkbird ITC-310TB

Also: Yeast Starters & Fermentation | Kegerator Tips & Gear | Inkbird ITC308 Review

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

prod:B0743CK1FN

Flash Sale, Today Only: 25% Off ThermoWorks ThermoDrop Ambient Temperature Thermometer

thermoworks thermodrop

ThermoDrop from ThermoWorks

More Info

From the product description, check product page for current description, price and availability:

  • Big, backlit digits
  • Auto-rotating display
  • IP67 water resistant
  • Range from -13 to 122°F (-25 to 50°C)
  • Switchable °C/°F
  • Designed in Utah by ThermoWorks

For all of your ambient temperatures on the go, you need ThermoDrop (patent pending). ThermoDrop attaches to your jacket zipper or any place you can attach a key ring. Small enough so that it can be placed inconspicuously but big enough to do the job well. The auto-rotating display and big digits mean you can read the temperature from any angle. Whether hiking, biking, skiing, camping, or just out for an evening stroll, ThermoDrop gives you the temperature of the great outdoors. It will even tell you how cold it got overnight with the Max/Min readings. And, with the IP67 rating, you are protected from splashes and unexpected rain showers. ThermoDrop is perfect for indoor temperatures too! Hang in fridges, freezers, or anywhere you need an ambient measurement.


 

Designed to monitor ambient temps.  Water resistant.  Potential homebrew related applications: Use to monitor your kegerator, beer fridge, fermentation chamber or fermentation area.

This is on sale for $16.50.  That’s a 25% discount.  No coupon code is necessary. Valid today 3/16 only. Check ThermoWorks for current availability and price.

ThermoDrop™ Zipper-Pull Thermometer

Going to Buy Something Else??  We have one time use 10% off coupons.  Those do not work with sale items but the will work with everything else.  If you’re planning to get something else along with this sale item… Get a coupon

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Check sale or product page for current availability & pricing

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

Higher Wattage Gear? BN-Link Digital Two Phase Temp Controller, 1,875 Watt Max

BN-LINK Digital Temperature Controller Heating Cooling 2-Stage Outlet Thermostat Controller Plug for Reptiles Aquarium Carboy Homebrew Breeding Fermenter Seed Germination °C/°F -40-176°F 15A/1875W

BN-LINK Digital Heating and Cooling Professional Thermostat Controller for Seed Germination, Reptiles and Brewing Breeding -40-176°F 15A/1875W

More Info


Highlighted Features
  • ✓ VARIETY OF USES: The heating and cooling thermostat can be used for seedling germination, rooting, brewing, heating, fermentation, aquarium, and more! keep your various environments in their ideal temperature range. Support multi-scene and multi-purpose use. Enrich your life and bring you happiness. Also features a 71 inch power cord and 71 inch probe cord for flexibility
  • ✓ DUAL OUTLET & DUAL FUNCTIONALITY: The professional dual digital outlet three-prong ground plugs thermostat controller is capable of controlling a heating and cooling device simultaneously. Bring you great convenience by replacing those controllers that only have a single function
  • ✓ SET AND GO: The digital reptile aquarium thermometer have clear display screen, flexible buttons, and sensitive socket contacts. Simply set the temperature probe, plug-in the controller, and use the large 6-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius
  • ✓ PROFESSIONAL GRADE: The tempature controlled heater cooler own high-accuracy waterproof temperature probe with working temperature from -58 to 230°F; Controller with working temperature from -40 to 176°F. Maximize its functions
  • SAFE & RELIABLE: The advanced thermostat controller comes with overload protection. Rated Voltage is 125VAC 60Hz, Max Loading: 15A/1875W, 1/2HP, TV-5

 

I would say that 1,875 Watt is a higher capacity than many of the homebrew controllers out there.

BN-LINK Digital Temperature Controller Heating Cooling 2-Stage Outlet Thermostat Controller Plug for Reptiles Aquarium Carboy Homebrew Breeding Fermenter Seed Germination °C/°F -40-176°F 15A/1875W – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Hands on Review!

Hands on Review: BN-Link Digital Two Stage Temp Controller – Fermentation & Kegerator


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Inkbird ITC-310TB, Dual Stage w/12 Programmable Timers

Itc-301TB by Inkbird.  Digital Dual Stage Pre-Wired Temperature Controller with 12 Timers.

More Info

From the product description, check product page for current description, price and availability:

Highlighted Features
  • 💫💫[Multipurpose] Mainly used to control temperature during fermentation process of beer and wine brewing, also widely used in home brewing, aquarium, pet breeding, and hatching, etc.
  • 💫💫[Multiperiod] Can be set 12 different temperatures in 12 different periods of time, and the timers will start when the setpoint temperature is reached.
  • 💫💫[Large Time Range] Can be set single or cycle control mode. Wider time setting range: 1~999(min/hr), 1~90(days)
  • 💫💫[Mode & Function] Support °F/°C mode and easy to set. Alarm when over-temperature and sensor error.
  • 💫💫[Dual Relay Output & Display] Dual relay output, be able to connect with refrigeration and heating equipment at the same time. PV and SV dual display windows, be able to display measured temperature and setting temperature at the same time.

 

Dual stage means that the Itc-310TB can control both a heating and cooling device.  Alternatively, it can control a heating or a cooling device.  This controller displays in Fahrenheit and Centigrade.

Inkbird ITC-310T-B Digital Temperature Controller 12 Different Periods of Time for Mason Jar Incubator Winemaking Refrigerator Fridge Reptile – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Related: Settings Walkthrough Inkbird ITC-310TB

Also: Yeast Starters & Fermentation | Kegerator Tips & Gear | Inkbird ITC308 Review


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

prod:B0743CK1FN t

Inkbird ITC-308 Digital Dual Stage Temp Controller with WiFi + Hands on Review

Inkbird WIFI Temperature Controller Reptile Freezer Thermostat ITC308 2.4GHz Digital Heating and Cooling Aquarium Heater Cooler Greenhouse Plug Outlet Probe Dual Stage 1100W 110V

ITC-308 Dual Stage, Pre-Wired Digital Temperature Controller with WI-FI by Inkbird

More Info

From the product description, check product page for current description, price and availability:

  • [WIFI & APP] WIFI smart controller supports both IOS & Android,WIFI supports 2.4GHz Wi-Fi router, free APP “InkbirdSmart” which is able to monitor temperature at any time.
  • [Dual Relay Output] Dual relay output, which can connect heating and cooling device at the same time.
  • [Alarm for Safe] High/Low temperature limit setting alarm.
  • [Convenient Design] Plug-n-play, easy to use. Support ℃/℉reading and Temperature calibration.
  • [Maximum Output Load] 1100W(110V).

 

This controller can control both a heating and cooling device.  Alternatively, it can control a heating or a cooling device.

In my opinion the original ITC-308 was and is a game changer as far as homebrew temp controllers.  In comparison to available controllers available at the time the ITC-308 was released, it offered loads more features, including dual stage control, for a fraction of the price.  Game changer!  The addition of Wi-Fi control and monitoring to this great controller has made a great temp controller even better.  Check out our Hands on Review of the ITC-308.  That includes a section on the WiFi version.

Inkbird WIFI Temperature Controller Reptile Freezer Thermostat ITC308 2.4GHz Digital Heating and Cooling Aquarium Heater Cooler Greenhouse Plug Outlet Probe Dual Stage 1100W 110V  – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Yeast Starters & Fermentation | Kegerator Tips & Gear | Inkbird Temperature Controller Deals and Reviews!

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

prod:B07PZNGVMX

VIVOHOME Digital Heat Temp Controller

VIVOHOME 40-108°F Temperature Digital LED Heat Mat Thermostat Controller for Seed Germination Reptiles and Brewing

Digital Heat Mat Thermostat Controller

More Info


Highlighted Features
  • IDEAL TEMP CONTROL - Improve propagation rates by maintaining root zone temperatures between 40-108°F (5-42°C); Provide constant optimum temperatures for specific plants and controls temperature in colder or warmer environments; The thermostat will automatically shut off the heat mat when it reaches to the preset temperature
  • COMPACT CONSTRUCTION - High-quality plastic housing with a protective film on the front panel which is durable to ensure that it will not rust or malfunction under harsh conditions; Suction cup on the power cord helps to fix the sensor probe to the target
  • LED INDICATOR - A luminous LED screen display is included which is easy to read and the program will help you to remember the current temperature and read in even dark environments; Easily switch between Celsius and Fahrenheit to meet your needs
  • EASY SET-UP - Simply plug the mat into the thermostat, then place the temperature probe at the desired location; 3 sensitive buttons interface makes a smooth operation and can easily be calibrated; Compatible with almost all heat mats; You can hang or stick it anywhere, on a wall / shelf / cabinet and so much more
  • Compatibility & Safety Guaranteed - Equipped with a 5.8 ft-long power cord and a 6.4 ft-long probe cord, it is suitable for any place you need to place

 

Note: This is for heating only.   Also: Homebrew Temp Controller Roundup! and Maintaining Fermentation Temps in Colder Weather

VIVOHOME 40-108°F Temperature Digital LED Heat Mat Thermostat Controller for Seed Germination Reptiles and Brewing – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Inkbird ITC-308 Digital Temperature Controller| Review



This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

VIVOHOME Digital Heat Temp Controller

VIVOHOME 40-108°F Temperature Digital LED Heat Mat Thermostat Controller for Seed Germination Reptiles and Brewing

Digital Heat Mat Thermostat Controller

More Info


Highlighted Features
  • IDEAL TEMP CONTROL - Improve propagation rates by maintaining root zone temperatures between 40-108°F (5-42°C); Provide constant optimum temperatures for specific plants and controls temperature in colder or warmer environments; The thermostat will automatically shut off the heat mat when it reaches to the preset temperature
  • COMPACT CONSTRUCTION - High-quality plastic housing with a protective film on the front panel which is durable to ensure that it will not rust or malfunction under harsh conditions; Suction cup on the power cord helps to fix the sensor probe to the target
  • LED INDICATOR - A luminous LED screen display is included which is easy to read and the program will help you to remember the current temperature and read in even dark environments; Easily switch between Celsius and Fahrenheit to meet your needs
  • EASY SET-UP - Simply plug the mat into the thermostat, then place the temperature probe at the desired location; 3 sensitive buttons interface makes a smooth operation and can easily be calibrated; Compatible with almost all heat mats; You can hang or stick it anywhere, on a wall / shelf / cabinet and so much more
  • Compatibility & Safety Guaranteed - Equipped with a 5.8 ft-long power cord and a 6.4 ft-long probe cord, it is suitable for any place you need to place

 

Note: This is for heating only.   Also: Homebrew Temp Controller Roundup! and Maintaining Fermentation Temps in Colder Weather

VIVOHOME 40-108°F Temperature Digital LED Heat Mat Thermostat Controller for Seed Germination Reptiles and Brewing – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Inkbird ITC-308 Digital Temperature Controller| Review



This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

5 Cu Ft Insignia Freezer [Fermentation or Kegerator] – on sale for $169.99

Insignia™ - 5.0 Cu. Ft. Chest Freezer - White

5 Cu Ft Insignia Deep Freeze from Best Buy.  Model NS-CZ50WH0

Possible Uses: You could use this to put together a freezer based kegerator/keezer (See: Tips and Gear for your Kegerator) or temperature controlled fermentation chamber.

As of this posting, Best Buy has this marked down to $169.99. Order online to reserve yours and select in store picking to skip the shipping charge.  Check Best Buy for current price and availability.

Insignia™ – 5.0 Cu. Ft. Chest Freezer – White

Check sale or product page for current availability & pricing


Related: Yeast Starters & Fermentation | Kegerator Tips & Gear | Resource Page: Chest Freezer Deals | Inkbird Temperature Controller Deals and Reviews!

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

Inkbird ITC-308 Digital Temperature Controller| Review


pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

WiFi Dual Stage Temp Controller – Works with Alexa & Google Home

Smart Temperature Controller, TESSAN WiFi Plug-in Digital Thermostat with Heating, Cooling Outlet Work with Alexa, Google Home, App Monitor, Record, Alarm for Homebrew Seed Reptile Greenhouse Aquarium

WiFi Dual Stage Temp Controller – Works with Alexa & Google Home

More Info

From the product description, check product page for current description, price and availability:

  • Plug and Play: TESSAN wifi digital temperature controller comes with smart heating and cooling outlets; Simply plug in the smart thermostat, you can mount or hang the plug as needs; With suction cup on the probe, allows to place it to the glass or wall stably; Completed the setup in minutes
  • Advanced Remote Control: Adjust the settings and monitor the smart temperature controller on free app from anywhere; Temps record can be viewed on the phone; Help you locate the detailed data to better monitor the scenes; An alert notification will automatic send to you once the temp exceed the setting range; Support 2.4Ghz Wifi only, dual-band (2.4G and 5G) WiFi need to set a separate 2.4G channel
  • Wide Compatibility: TESSAN wifi temperature controller support -22~221℉ / -30~105℃, suitable for extreme temperature in summer or winter; Each outlet support 10A, 1250W, suitable for main heater and cooler; Ideal for homebrew, fermentation, breeding, incubation, greenhouse and more
  • Durable Salt-proof Probe: The probe is salt and spray resistance and replaceable;It can be widely used in a variety of scenarios that need automatic temperature control; With temperature calibration function, you can get the temps more accurately;
  • Upgrade Mode: TESSAN smart temperature controller has upgraded the program to avoid the constantly trigger of the device after the thermostat reaches the set value; When the set value is exceed, the smart cooling or heating outlet will automatically turn on; It will operate for a period of time to keep the temperature at a more stable leve

 

Smart Temperature Controller, TESSAN WiFi Plug-in Digital Thermostat with Heating, Cooling Outlet Work with Alexa, Google Home, App Monitor, Record, Alarm for Homebrew Seed Reptile Greenhouse Aquarium – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Inkbird ITC-310TB, Dual Stage w/12 Programmable Timers

Itc-301TB by Inkbird.  Digital Dual Stage Pre-Wired Temperature Controller with 12 Timers.

More Info

From the product description, check product page for current description, price and availability:

Highlighted Features
  • 💫💫[Multipurpose] Mainly used to control temperature during fermentation process of beer and wine brewing, also widely used in home brewing, aquarium, pet breeding, and hatching, etc.
  • 💫💫[Multiperiod] Can be set 12 different temperatures in 12 different periods of time, and the timers will start when the setpoint temperature is reached.
  • 💫💫[Large Time Range] Can be set single or cycle control mode. Wider time setting range: 1~999(min/hr), 1~90(days)
  • 💫💫[Mode & Function] Support °F/°C mode and easy to set. Alarm when over-temperature and sensor error.
  • 💫💫[Dual Relay Output & Display] Dual relay output, be able to connect with refrigeration and heating equipment at the same time. PV and SV dual display windows, be able to display measured temperature and setting temperature at the same time.

 

Dual stage means that the Itc-310TB can control both a heating and cooling device.  Alternatively, it can control a heating or a cooling device.  This controller displays in Fahrenheit and Centigrade.

Inkbird ITC-310T-B Digital Temperature Controller 12 Different Periods of Time for Mason Jar Incubator Winemaking Refrigerator Fridge Reptile – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Related: Settings Walkthrough Inkbird ITC-310TB

Also: Yeast Starters & Fermentation | Kegerator Tips & Gear | Inkbird ITC308 Review


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

prod:B0743CK1FN

TWO x Waterproof Heating Mat by VIVOHOME [fermentation temps]

VIVOHOME 20W Waterproof Seedling Heat Mats for Seed Starting Propagation and Increase Germination Success 10 inch x 20.75 inch Pack of 2 MET Safety Standard Certified

More Info


Highlighted Features
  • PROFESSIONAL HEAT MAT - Provide your seedlings with a warmer environment to speed up germination, raise success rates, and increase growth rates; A faster growth rate translates to quicker transplant times and higher future yields; Use indoors, in greenhouses, and grow tents, help make your garden a healthy and fruitful place
  • DURABLE & RELIABLE - Made with heavy duty PVC material that is durable and resists wear and tear; multi-layer structure with built-in insulated wiring and PET film design follows strict safety standards; IPX-4 water-resistant surface helps keep the device clean and functioning properly
  • STABLE HEATING SYSTEM - Automatically warms root area 10-20℉(5-11℃) over the ambient air temperature, which will increase the success of seedlings and cuttings; We recommend using this with VIVOHOME thermostat for proper temperature control
  • EASY TO USE - Simply flatten and place beneath your seedling tray and plug the cord into a standard 120V outlet to begin heating; With helpful instructions and growing tips printed on the mat, you’ll never be at a loss for growing your plants
  • STORE AWAY - Dimensions: 10 x 20.75 inches, with a 5.7-ft power cord, this heating pad fits standard 1020 seedling trays; Comes with a handy carrying bag; Seeds germinated and you need to store the mat? Simply roll it up and pack it away, guaranteed not to take up much room

 

VIVOHOME 20W Waterproof Seedling Heat Mats for Seed Starting Propagation and Increase Germination Success 10 inch x 20.75 inch Pack of 2 MET Safety Standard Certified – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

More Fermentation Related!

 


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Inkbird ITC-308 Digital Temperature Controller| Review

VIVOHOME Digital Heat Temp Controller

VIVOHOME 40-108°F Temperature Digital LED Heat Mat Thermostat Controller for Seed Germination Reptiles and Brewing

Digital Heat Mat Thermostat Controller

More Info


Highlighted Features
  • IDEAL TEMP CONTROL - Improve propagation rates by maintaining root zone temperatures between 40-108°F (5-42°C); Provide constant optimum temperatures for specific plants and controls temperature in colder or warmer environments; The thermostat will automatically shut off the heat mat when it reaches to the preset temperature
  • COMPACT CONSTRUCTION - High-quality plastic housing with a protective film on the front panel which is durable to ensure that it will not rust or malfunction under harsh conditions; Suction cup on the power cord helps to fix the sensor probe to the target
  • LED INDICATOR - A luminous LED screen display is included which is easy to read and the program will help you to remember the current temperature and read in even dark environments; Easily switch between Celsius and Fahrenheit to meet your needs
  • EASY SET-UP - Simply plug the mat into the thermostat, then place the temperature probe at the desired location; 3 sensitive buttons interface makes a smooth operation and can easily be calibrated; Compatible with almost all heat mats; You can hang or stick it anywhere, on a wall / shelf / cabinet and so much more
  • Compatibility & Safety Guaranteed - Equipped with a 5.8 ft-long power cord and a 6.4 ft-long probe cord, it is suitable for any place you need to place

 

Note: This is for heating only.   Also: Homebrew Temp Controller Roundup! and Maintaining Fermentation Temps in Colder Weather

VIVOHOME 40-108°F Temperature Digital LED Heat Mat Thermostat Controller for Seed Germination Reptiles and Brewing – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Inkbird ITC-308 Digital Temperature Controller| Review



This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

AC Infinity SUNCORE Waterproof Seedling Heat Mat [fermentation temps]

AC Infinity SUNCORE A3, Waterproof Seedling Heat Mat 10″ x 20.75″ MET & UL-Certified Heating Pad

More Info


 

 

AC Infinity SUNCORE A3, Waterproof Seedling Heat Mat 10″ x 20.75″ MET & UL-Certified Heating Pad for Indoor Gardening, Hydroponics, Germination, Cloning – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

More Fermentation Related!

 


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

AC Infinity SUNCORE Waterproof Seedling Heat Mat [fermentation temps]

AC Infinity SUNCORE A3, Waterproof Seedling Heat Mat 10″ x 20.75″ MET & UL-Certified Heating Pad

More Info


 

 

AC Infinity SUNCORE A3, Waterproof Seedling Heat Mat 10″ x 20.75″ MET & UL-Certified Heating Pad for Indoor Gardening, Hydroponics, Germination, Cloning – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

More Fermentation Related!

 


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Bayite BTC201 TWO Stage Digital Temp Controller

Temperature Controller bayite BTC201 by bayite. Pre-Wired Digital Outlet Thermostat, 2 Stage Heating and Cooling Mode,

More Info


Highlighted Features
  • Simplified Design---Plug and play, easy to set. Support °C/°F display
  • Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1100W(110V)
  • Dual Display Window---Be able to display real-time temperature and set temperature at the same time.
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • Package Contents: A bayite BTC 201 temperature controller, which comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C)

 

Dual stage means that this can control both a heating and cooling device.  Alternatively, it can control a heating or a cooling device.

bayite Temperature Controller BTC201 10A Dual Pre-Wired Digital Outlet Thermostat Plug, 2 Stage Heating and Cooling Mode, 110V – 240V, Fermentation BBQ Reptile Aquarium – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link



This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon