From the product description, check product page for current description, price and availability:
【2 in 1】 This digital dual temperature controller can control 2 devices simultaneously with independent probe and output. Max Output: 10A 120Vac (10A Relay inside, please use Load current <5A). This temperature controller is direct output, you need to connect the heating/cooling devices to the output terminal first, and then power on the temperature controller.
【Heating and cooling function】 This temperature controller 110v has two working modes: heating mode and cooling mode. Temperature control range: -58~248℉, Control accuracy:±1℉. It also supports temperature calibration ( -30~30℉), making the temperature control more accurate.
【Easy to operate】 Set start temperature and stop temperature, this temperature controller will start to work as programmed. You can also set compressor delay time for delay start protection, set high temperature alarm value and low temeprature alarm value for high/low temperature protection.
【Dual 1.5m NTC 10K probes waterproof】 This temperature controller features dual 1.5m NTC 10K probes made in TPE material and NTC 10K thermistor, which is professionally waterproof that can be placed in the water for a long time, longer service life than other metal probes.
【More features you’ll love】This temperature controller can be reset as needed and has data storage function that all parameters setting can be saved after short circuit or power off. It can be used for aquarium, reptile, incubator, terrarium, freezer, refrigerator, fridge, homebrew, vivarium, fermentation, pet breeding, industrial equipment and other temperature-controlled system.
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
♥【What You Get】In this PID temperature controller kit,it include 1 x PID temperature controller,1 x solid state relay 40DA，1 x K type thermocouple，1 x heat sink.
♥【Product parameters】Power supply voltage:110-240VAC 50/60Hz;power comsumption:≤5VA;working environment:ambient temperature: 0℃~50℃,relative humidity: 35%~85% (no condensation) ；storage temperature：-25℃~65℃（avoid ice or dew）；resolution：1℃，0.1℃（adjustable）；wiring method：terminals；accuracy：+0.5%FS;memory protection:non-volatile memory;installation environment:installation type ll, pollution grade 2 (IEC61010-1);logic level output:ON:DC12V; OFF: below DC0.5V; max current: 30mA, load resistance:≥1K.
♥【Feature】 Support 2 wire thermocouple input,1 way solid state relay output,1 way relay alarm output;digital display of real-time and set temperatures,adjustable degrees ℉ and ℃.
♥【Size】The panel size of PID temperature controller is 48(W)mmx48mm(L),install hole size is 46(W)mmx46mm(L).Total size:48mm(W)x48mm(L)x76mm(H)
♥【Widely application】Widely used in chemical industry, medical industry, product industry, machinery industry, greenhouse farming, agricultural planting, etc.
PID Temperature Controllers can be used in conjunction with a relay and a temperature probe to control the your kegerator and fermentation temps. You can also integrate a PID controller into your brew system to control mash temps and more.
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
Inkbird digital dual stage temp controller with 12 timers via MoreBeer
From the product description, check product page for current description, price and availability:
The Inkbird ITC-310T-B dual relay temperature controller is an easy to use and durable controller that is perfect for home brewing. Control both heating and cooling, and set independent differentials for each to keep the exact temperature you need. This Inkbird is programmable allowing you to set up to 12 different temperatures for 12 different periods of time. This is a great way to automate the steps of your mash, set fermentation schedules, and any other creative uses requiring temperature changes over time.
Simple plug and play design with user friendly LED interface
Programmable up to 12 different temperatures over 12 different times
Dual relay output – control both heating and cooling
Adjustable Heating/Cooling differential
1200 W max power
Celsius or Fahrenheit
High and low temperature and sensor fault alarms
Can control temperatures of -58° F through 248° F (-50° C – 120° C)
Body Dimensions: 5.5 in x 2.7 in x 1.3 in
The Ink bird controller performs many of the same functions as the Ranco or Johnson but at a more affordable price, making it a great alternative for temperature control.
Use to control fermentation or kegerator temperatures.
Product Description – Here – Use coupon code BEERDEAL to get this discount.
Availability: This is a More Beer Deal of the Day. Quantities are limited. Check the Deal of the Day section – Here – to see if this is still available.
This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
WiFi Dual Stage Temp Controller – Works with Alexa & Google Home
More Info
From the product description, check product page for current description, price and availability:
Plug and Play: TESSAN wifi digital temperature controller comes with smart heating and cooling outlets; Simply plug in the smart thermostat, you can mount or hang the plug as needs; With suction cup on the probe, allows to place it to the glass or wall stably; Completed the setup in minutes
Advanced Remote Control: Adjust the settings and monitor the smart temperature controller on free app from anywhere; Temps record can be viewed on the phone; Help you locate the detailed data to better monitor the scenes; An alert notification will automatic send to you once the temp exceed the setting range; Support 2.4Ghz Wifi only, dual-band (2.4G and 5G) WiFi need to set a separate 2.4G channel
Wide Compatibility: TESSAN wifi temperature controller support -22~221℉ / -30~105℃, suitable for extreme temperature in summer or winter; Each outlet support 10A, 1250W, suitable for main heater and cooler; Ideal for homebrew, fermentation, breeding, incubation, greenhouse and more
Durable Salt-proof Probe: The probe is salt and spray resistance and replaceable;It can be widely used in a variety of scenarios that need automatic temperature control; With temperature calibration function, you can get the temps more accurately;
Upgrade Mode: TESSAN smart temperature controller has upgraded the program to avoid the constantly trigger of the device after the thermostat reaches the set value; When the set value is exceed, the smart cooling or heating outlet will automatically turn on; It will operate for a period of time to keep the temperature at a more stable leve
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
Possible uses include monitoring kegerator temperatures, beer fridge temperatures and fermentation chamber/area temperatures.
This has a hygrometer function as well. That shows % relative humidity and could be handy for judging whether your Eva Dry (or similar) needs recharged for the purpose of handling excess kegerator and fermentation chamber wetness. See: Damp Kegerator? Fix Kegerator Condensation
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
VIVOHOME 20W Waterproof Seedling Heat Mats for Seed Starting Propagation and Increase Germination Success 10 inch x 20.75 inch Pack of 2 MET Safety Standard Certified
More Info
Highlighted Features
PROFESSIONAL HEAT MAT - Provide your seedlings with a warmer environment to speed up germination, raise success rates, and increase growth rates; A faster growth rate translates to quicker transplant times and higher future yields; Use indoors, in greenhouses, and grow tents, help make your garden a healthy and fruitful place
DURABLE & RELIABLE - Made with heavy duty PVC material that is durable and resists wear and tear; multi-layer structure with built-in insulated wiring and PET film design follows strict safety standards; IPX-4 water-resistant surface helps keep the device clean and functioning properly
STABLE HEATING SYSTEM - Automatically warms root area 10-20℉(5-11℃) over the ambient air temperature, which will increase the success of seedlings and cuttings; We recommend using this with VIVOHOME thermostat for proper temperature control
EASY TO USE - Simply flatten and place beneath your seedling tray and plug the cord into a standard 120V outlet to begin heating; With helpful instructions and growing tips printed on the mat, you’ll never be at a loss for growing your plants
STORE AWAY - Dimensions: 10 x 20.75 inches, with a 5.7-ft power cord, this heating pad fits standard 1020 seedling trays; Comes with a handy carrying bag; Seeds germinated and you need to store the mat? Simply roll it up and pack it away, guaranteed not to take up much room
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
ITC-308 Dual Stage, Pre-Wired Digital Temperature Controller with WI-FI by Inkbird
More Info
From the product description, check product page for current description, price and availability:
[WIFI & APP] WIFI smart controller supports both IOS & Android，WIFI supports 2.4GHz Wi-Fi router, free APP “InkbirdSmart” which is able to monitor temperature at any time.
[Dual Relay Output] Dual relay output, which can connect heating and cooling device at the same time.
[Alarm for Safe] High/Low temperature limit setting alarm.
[Convenient Design] Plug-n-play, easy to use. Support ℃/℉reading and Temperature calibration.
[Maximum Output Load] 1100W(110V).
This controller can control both a heating and cooling device. Alternatively, it can control a heating or a cooling device.
In my opinion the original ITC-308 was and is a game changer as far as homebrew temp controllers. In comparison to available controllers available at the time the ITC-308 was released, it offered loads more features, including dual stage control, for a fraction of the price. Game changer! The addition of Wi-Fi control and monitoring to this great controller has made a great temp controller even better. Check out our Hands on Review of the ITC-308. That includes a section on the WiFi version.
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
Itc-301TB by Inkbird. Digital Dual Stage Pre-Wired Temperature Controller with 12 Timers.
More Info
From the product description, check product page for current description, price and availability:
Highlighted Features
💫💫[Multipurpose] Mainly used to control temperature during fermentation process of beer and wine brewing, also widely used in home brewing, aquarium, pet breeding, and hatching, etc.
💫💫[Multiperiod] Can be set 12 different temperatures in 12 different periods of time, and the timers will start when the setpoint temperature is reached.
💫💫[Large Time Range] Can be set single or cycle control mode. Wider time setting range: 1~999(min/hr), 1~90(days)
💫💫[Mode & Function] Support °F/°C mode and easy to set. Alarm when over-temperature and sensor error.
💫💫[Dual Relay Output & Display] Dual relay output, be able to connect with refrigeration and heating equipment at the same time. PV and SV dual display windows, be able to display measured temperature and setting temperature at the same time.
Dual stage means that the Itc-310TB can control both a heating and cooling device. Alternatively, it can control a heating or a cooling device. This controller displays in Fahrenheit and Centigrade.
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
Professional, Reliable Results: Regulates and maintains your preferred temperature within a control range from 40-108 ℉ (Temperature display range is 32 -210°F); Perfect for professional horticulturalists or the budding grower; Comes with a sensor probe so you can reliably track the temperature of your plant’s roots
High-Quality Construction: With an easy-to-grip hexagonal shape and made of an extra-fortified plastic, components will not rust or malfunction under tough conditions
Zero-effort Set Up & Operation: The controller comes with a manual but you won’t need to read it; Using just 3 buttons, you can set a temperature or change the display between Fahrenheit/Celsius in seconds
Use, Hang, Forget: Our controller comes with a hanging tab and wall mount along with a convenient angled socket to keep cords untangled and neat; Guaranteed to keep your operation perfectly balanced, as all things should be
Compatibility & Safety Guaranteed: Compatible with any heat mat and ready to plug in to any North American outlet
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
Itc-301TB by Inkbird. Digital Dual Stage Pre-Wired Temperature Controller with 12 Timers.
More Info
From the product description, check product page for current description, price and availability:
Highlighted Features
💫💫[Multipurpose] Mainly used to control temperature during fermentation process of beer and wine brewing, also widely used in home brewing, aquarium, pet breeding, and hatching, etc.
💫💫[Multiperiod] Can be set 12 different temperatures in 12 different periods of time, and the timers will start when the setpoint temperature is reached.
💫💫[Large Time Range] Can be set single or cycle control mode. Wider time setting range: 1~999(min/hr), 1~90(days)
💫💫[Mode & Function] Support °F/°C mode and easy to set. Alarm when over-temperature and sensor error.
💫💫[Dual Relay Output & Display] Dual relay output, be able to connect with refrigeration and heating equipment at the same time. PV and SV dual display windows, be able to display measured temperature and setting temperature at the same time.
Dual stage means that the Itc-310TB can control both a heating and cooling device. Alternatively, it can control a heating or a cooling device. This controller displays in Fahrenheit and Centigrade.
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
Itc-301TB by Inkbird. Digital Dual Stage Pre-Wired Temperature Controller with 12 Timers.
More Info
From the product description, check product page for current description, price and availability:
Highlighted Features
💫💫[Multipurpose] Mainly used to control temperature during fermentation process of beer and wine brewing, also widely used in home brewing, aquarium, pet breeding, and hatching, etc.
💫💫[Multiperiod] Can be set 12 different temperatures in 12 different periods of time, and the timers will start when the setpoint temperature is reached.
💫💫[Large Time Range] Can be set single or cycle control mode. Wider time setting range: 1~999(min/hr), 1~90(days)
💫💫[Mode & Function] Support °F/°C mode and easy to set. Alarm when over-temperature and sensor error.
💫💫[Dual Relay Output & Display] Dual relay output, be able to connect with refrigeration and heating equipment at the same time. PV and SV dual display windows, be able to display measured temperature and setting temperature at the same time.
Dual stage means that the Itc-310TB can control both a heating and cooling device. Alternatively, it can control a heating or a cooling device. This controller displays in Fahrenheit and Centigrade.
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
You could use this as part of a kegerator/keezer build or as a fermentation chamber. You would need to use an overriding type thermostat for either of those. Consider: Inkbird Dual Stage Temp Controller
Itc-301TB by Inkbird. Digital Dual Stage Pre-Wired Temperature Controller with 12 Timers.
More Info
From the product description, check product page for current description, price and availability:
Highlighted Features
💫💫[Multipurpose] Mainly used to control temperature during fermentation process of beer and wine brewing, also widely used in home brewing, aquarium, pet breeding, and hatching, etc.
💫💫[Multiperiod] Can be set 12 different temperatures in 12 different periods of time, and the timers will start when the setpoint temperature is reached.
💫💫[Large Time Range] Can be set single or cycle control mode. Wider time setting range: 1~999(min/hr), 1~90(days)
💫💫[Mode & Function] Support °F/°C mode and easy to set. Alarm when over-temperature and sensor error.
💫💫[Dual Relay Output & Display] Dual relay output, be able to connect with refrigeration and heating equipment at the same time. PV and SV dual display windows, be able to display measured temperature and setting temperature at the same time.
Dual stage means that the Itc-310TB can control both a heating and cooling device. Alternatively, it can control a heating or a cooling device. This controller displays in Fahrenheit and Centigrade.
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
GOQOTOMO Smart Temperature Controller Thermostat Heating and Cooling Mode for Homebrew Fermenter Greenhouse Terrarium 100-240VAC NTC Sensor
More Info
From the product description, check product page for current description, price and availability:
[Smart Display] Everything clearly displayed in one color screen, including measured temperature, heating/cooling temperature, high/low temperature alarm and compressor delay.
[User Friendly] It is the easiest temperature controller on the market that you are able to operate without user manual. Setup and display is intuitive.
[Detachable Probe] The probe is easy detachable from Type-C port. Probe replaceable once it breakdown.
[Dual Output] Two independently controlled relays allow to control refrigeration and heating equipment at the same time.
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
Itc-301TB by Inkbird. Digital Dual Stage Pre-Wired Temperature Controller with 12 Timers.
More Info
From the product description, check product page for current description, price and availability:
Highlighted Features
💫💫[Multipurpose] Mainly used to control temperature during fermentation process of beer and wine brewing, also widely used in home brewing, aquarium, pet breeding, and hatching, etc.
💫💫[Multiperiod] Can be set 12 different temperatures in 12 different periods of time, and the timers will start when the setpoint temperature is reached.
💫💫[Large Time Range] Can be set single or cycle control mode. Wider time setting range: 1~999(min/hr), 1~90(days)
💫💫[Mode & Function] Support °F/°C mode and easy to set. Alarm when over-temperature and sensor error.
💫💫[Dual Relay Output & Display] Dual relay output, be able to connect with refrigeration and heating equipment at the same time. PV and SV dual display windows, be able to display measured temperature and setting temperature at the same time.
Dual stage means that the Itc-310TB can control both a heating and cooling device. Alternatively, it can control a heating or a cooling device. This controller displays in Fahrenheit and Centigrade.
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
From the product description, check product page for current description, price and availability:
Keep your yeast happy and your ferment warm during those cold winter months with this flexible heater wrap! Unlike those old heater belts, the FermWrap covers a wide area of your carboy or fermentation vessel, promoting an even heat distribution (11″ tall x 25″ wide.). Using tape to adhere, the FermWrap can be attached directly to your fermenter, or can be used to heat the space in a box (or refrigerator) that the fermenter is in. Depending on your configuration and insulation, you can increase the temperature of your ferment from 5-20 degrees Fahrenheit. This differential can be increased by using our carboy bag to insulate a carboy (this has been tested). To decrease the temperature differential, stick only a portion of the FermWrap to the fermenter.
With 40 watts of heat spread over almost two square feet it provides gentle even heating. Draws 40 watts. 115V.
For more precise results, we recommend a temp controller and carboy thermowell for the ultimate in fermentation temperature control. Or for the best control, use the dual stage control and carboy thermowell, as well as a refrigerator, to control both the high and low temps.
Limited Availability Deal of the Day: As of this posting, this is marked down to $23.99 as a MoreBeer Deal of the Day. Shipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.
Product Description – Here– Use coupon code BEERDEAL to get this discount.
I use a similar heat mat to help remove stubborn keg labels. See: Removing Keg Labels… A Trick That Makes it Easy! – a section of our keg rebuild how-to
This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!
Itc-301TB by Inkbird. Digital Dual Stage Pre-Wired Temperature Controller with 12 Timers.
More Info
From the product description, check product page for current description, price and availability:
Highlighted Features
💫💫[Multipurpose] Mainly used to control temperature during fermentation process of beer and wine brewing, also widely used in home brewing, aquarium, pet breeding, and hatching, etc.
💫💫[Multiperiod] Can be set 12 different temperatures in 12 different periods of time, and the timers will start when the setpoint temperature is reached.
💫💫[Large Time Range] Can be set single or cycle control mode. Wider time setting range: 1~999(min/hr), 1~90(days)
💫💫[Mode & Function] Support °F/°C mode and easy to set. Alarm when over-temperature and sensor error.
💫💫[Dual Relay Output & Display] Dual relay output, be able to connect with refrigeration and heating equipment at the same time. PV and SV dual display windows, be able to display measured temperature and setting temperature at the same time.
Dual stage means that the Itc-310TB can control both a heating and cooling device. Alternatively, it can control a heating or a cooling device. This controller displays in Fahrenheit and Centigrade.
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
WiFi Dual Stage Temp Controller – Works with Alexa & Google Home
More Info
From the product description, check product page for current description, price and availability:
App Remote Control: This smart temperature controller compatible with Amazon Alexa and Google Assistant for voice control. App lets you calibrate and set temp values to suit your needs. Easily monitor temperature in real-time on the smart life app.
Easy to Use: Plug and play, only takes two steps to set up and adjust. Dual relay output, which can connect heating and cooling device at the same time. Support reading with ℃ and ℉.
High Accuracy and Quickly Refresh: With a built-in smart sensor, this digital thermostat provides highly accurate & precise readings. Data measurements are updated every 1s to give you lastest changes of the temperature.
Prompt Alert Notification: Set preset temp ranges with the Smart Life App, if levels fall out of that range, and you’ll receive a notification instantly via app.
Data Storage：Featuring 7 days’ online data storage, you can easily view recent temp records. A curve graph display gives you a clear, visual image for tracking your data.
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
BN-LINK Digital Heating and Cooling Professional Thermostat Controller for Seed Germination, Reptiles and Brewing Breeding -40-176°F 15A/1875W
More Info
Highlighted Features
✓ VARIETY OF USES: The heating and cooling thermostat can be used for seedling germination, rooting, brewing, heating, fermentation, aquarium, and more! keep your various environments in their ideal temperature range. Support multi-scene and multi-purpose use. Enrich your life and bring you happiness. Also features a 71 inch power cord and 71 inch probe cord for flexibility
✓ DUAL OUTLET & DUAL FUNCTIONALITY: The professional dual digital outlet three-prong ground plugs thermostat controller is capable of controlling a heating and cooling device simultaneously. Bring you great convenience by replacing those controllers that only have a single function
✓ SET AND GO: The digital reptile aquarium thermometer have clear display screen, flexible buttons, and sensitive socket contacts. Simply set the temperature probe, plug-in the controller, and use the large 6-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius
✓ PROFESSIONAL GRADE: The tempature controlled heater cooler own high-accuracy waterproof temperature probe with working temperature from -58 to 230°F; Controller with working temperature from -40 to 176°F. Maximize its functions
SAFE & RELIABLE: The advanced thermostat controller comes with overload protection. Rated Voltage is 125VAC 60Hz, Max Loading: 15A/1875W, 1/2HP, TV-5
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
