From the product description, check product page for current description, price and availability:

• PERFECT FOR ALL SIZE FERMENTERS. At 25″ long and 10″ tall, this heater will easily fit most beer and wine fermenters
• UPGRADED ELECTRICAL CONNECTIONS. Now manufactured with clip connections which are safer and will last longer than other heaters on the market
• EVEN HEAT. Attach to your preferred fermenter with electrical tape and this heater will provide even heat throughout the entire vessel
• ACCURATE TEMPERATURE CONTROL. Keep your fermenting liquid at the exact correct temperature when you pair this heater with a digital temperature controller.

From the product description, check product page for current description, price and availability:

• Controls both a heating and cooling/refrigeration device at the same time. This controller can also be used to easily control a single heating or cooling device
• Waterproof sensor, high/low temperature alarm, and automatic power-on delay to protect compressors
• MAX LOAD: 1100W at 110V. Celsius or Fahrenheit Read-out
• WIDE RANGE OF USES: seedling heat mat, home brewing, beer brewing, aquarium heater, pet breeding, incubation, BBQ, fermentation, accelerating germination, electric radiator, electric oven, heat mat, etc

From the product description, check product page for current description, price and availability:

• MONITOR FERMENTATION: The G. Francis® Homebrew 1/4″ Stainless Steel Thermowell and #7 Bung Stopper for Glass Carboy Fermentation Temperature Thermometer Probe gives your temperature controller accurate readings to keep your beer at a precise temperature for sterile temperature control; Heating kit and carboy not included
• KEEP OUT CONTAMINATION: Place a probe inside the tube and then inside your beer fermentation vessel (not included) to monitor your wort while keeping out harmful contaminants and aeration
• USE YOUR CARBOY: Compatible with most standard glass carboys, temperature controllers, and airlocks; The thermowell is entirely removable from the stopper to fit different sized configurations (#10 stoppers are recommended for plastic carboys)
• COMBINATION SET: In addition to the thermowell, the included #7 bung plug stopper has an airlock hole with a 0.25-inch (6mm) diameter for standard size airlock to prevent your carboy from building up pressure; The stopper has a 1.3-inch (33mm) top diameter and 0.9-inch (24mm) bottom diameter and includes all hardware needed for exact temperature control even in colder environments
• SECURE FIT: Constructed with a stainless-steel tube and silicone bung stopper; Make sure the carboy surface and the stopper itself are dry in order for it to stay secure once pressed into carboy; Approximate 0.25-inch (6mm) tube inside diameter (ID); 15.5-inch (39.4cm) overall length; 14.25-inch (36.2cm) tube and 1.1-inch (2.8cm) stopper

From the product description, check product page for current description, price and availability:

• INNOVATION: Meet Sub Xero the world’s only thermal insulating cooler cover for 5 gallon glass or plastic bottle jug containers. Superior to foam or plastic koozies/coolie. Why settle for warm water when this revolutionary 5 gallon thermal cover allows you to have cold, refreshing, hydrating water whenever & wherever!
• THE NEW COOLER: Electric water coolers are costly, bulky, and not portable. Imagine all the benefits of an electric water cooler. Sub Xero takes that up a step. It’s portable, affordable, last for years, never breaks down or lets you down! It was specifically made for fishing, camping, soccer moms, office, grilling, and anywhere.
• ULTRA PERFORMANCE: Neoprene is just as good as stainless steel insulator at 1/10 of the cost! It’s a synthetic rubber/fiber that maintains its insulation, the thicker the better. It’s extremely flexible, durable, long lasting & performs effectively. The exact fiber that scuba divers wear. It’s about 6mm thick.
• ALL IN ONE: The unique zig-zag stitching on our neoprene insulator coolie gives it added durability. Thus, results in a tighter fit, keeps water cold longer, and traps the cold particles from escaping.

From the product description, check product page for current description, price and availability:

• [Fully Submersible Aquarium Heater]—Voltage 110-120V/60HZ, power 500 watt, heater rod length 10.8 inches, suitable for aquarium/fish/turtle/betta tank 80-130 gallon. The controller power cord is 47 inches, The heater power cord is 67 inches and the temperature control range from 68~93°F.
• [Smart Heating]—When the water temperature is lower than the set temperature (red indicator), the fish heater starts to work until the water temperature reaches the set temperature (blue indicator). It can always provide stable water temperature for your beloved fish.
• [External Controller]—This 500W submersible heater is adjusted by an external controller, which you can mount on the outside edge of the tank. It’s convenient and safe for you to set the temperature, no need to take the heater out from water and risk burning yourself.
• [Dual Temp Displays]—With dual accurate LED digital temperature displays, you can read & set the water temperature at the same time. It is very easy and convenient for you to recognize and observe the temp change in real time even in the night!
• [High Quality Material]—Made of thicker quartz, this heater is shatter-proof and blast-proof. The heater cover is compact designed, which is heat resistant that will protect you little fish from scalding. Strong suction cup bracket help stably fix the heater in every corner of the fish tank.

From the product description, check product page for current description, price and availability:

• PERFECT FOR ALL SIZE FERMENTERS. At 25″ long and 10″ tall, this heater will easily fit most beer and wine fermenters
• UPGRADED ELECTRICAL CONNECTIONS. Now manufactured with clip connections which are safer and will last longer than other heaters on the market
• EVEN HEAT. Attach to your preferred fermenter with electrical tape and this heater will provide even heat throughout the entire vessel
• ACCURATE TEMPERATURE CONTROL. Keep your fermenting liquid at the exact correct temperature when you pair this heater with a digital temperature controller.

From the product description, check product page for current description, price and availability:

• PERFECT FOR ALL SIZE FERMENTERS. At 25″ long and 10″ tall, this heater will easily fit most beer and wine fermenters
• UPGRADED ELECTRICAL CONNECTIONS. Now manufactured with clip connections which are safer and will last longer than other heaters on the market
• EVEN HEAT. Attach to your preferred fermenter with electrical tape and this heater will provide even heat throughout the entire vessel
• ACCURATE TEMPERATURE CONTROL. Keep your fermenting liquid at the exact correct temperature when you pair this heater with a digital temperature controller.