Category Archives: Wort Chillers

400 GPH Submersible Pump, Brushless Motor, Stainless Impeller Shaft + Recirculating Draft Line Cleaning Build

Winkeyes 400GPH Pump

More Info

From the product description, check product page for current description, price and availability:

Highlighted Features
  • USE BRUSHLESS MOTOR, run smoothly, low noise, long working life compared with brush motor, keep it quiet and not scare the fish.
  • ANTI DRY BURNING DESGIN, the fish pong pump can withstand 48 hours dry burning. So no need to worry about there is not enough water in your fish tank when you go on a short trip.
  • STRONG POWER HIGH LIFT, this fountain pump max lift height: 6.9ft. 25W high efficiency motor for energy saving. Lift height is a max height the water goes up, after connecting the water pipe to the nozzle (Make sure the joint sealed securely and tightly)
  • STAINLESS STEEL PUMP IMPELLER SHAFT, corrosion resistance, strong driving, long working life, so JAKIELAX submersible pump also fit for sea water
  • SUCTION CUP 2 NOZZLES ADJUSTABLE FLOW RATE, 4 individual powerful suction cups that hold the pump securely on the right side of aquarium, vertically or horizontally. water change pump has 2 nozzles for optional

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

Winkeyes 400GPH Water Pump with 48 Hours Anti Dry Burning, Ultra Quiet 25W Submersible Fountain Aquarium Fish Pond Hydroponic Pump with 6.9ft High Lift, 5.9ft Power Cord, 2 Nozzles

– affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading

400 GPH Utility Pump + Draft Line Cleaning Builds

FREESEA Submersible Pump for Aquarium, Pond, Fountain, Hydroponics, Statuary

FREESEA Submersible Pump

More Info

From the product description, check product page for current description, price and availability:

  • High Efficiency and High Quality Materials: Compared with other submersible pumps, This submersible water pump fountain has higher quality and performance. The fountain pump casing is made of high quality ABS plastic and resin, which is anti-corrosion, acid and alkali resistant and waterproof and the protection function of water-proof is IPX8.
  • Water Flow Control and two Water Outlets : The submersible pump has a flow size adjustment valve, you can adjust to get the required water flow and control the water flow.The FREESEA water pump for aquarium is equipped with two water nozzles (1/2 inch and 4/5 inch). Max Flow: 400 GPH. Max Height:5.9 ft.
  • Ultra-Quiet Design : The water pump aquarium is designed with high quality motor to provide a quiet working environment, also with the function of energy saving and low power consumption, even in the bedroom or at night (power: 25 Watt). The threaded fittings of the pump make it work more stable. The impeller shaft is made of stainless steel shaft which can be used for fresh water or sea water. It is resistant to abrasion, rust and has a long service life.
  • Filter sponge and Suction Cup and footpad : This pump has 1 filter sponge, which can effectively filter large blocks during pumping to prevent water pump blockage, effectively improve the circulation system to maintain a clean water environment.And there are four powerful suction cup or footpad at the bottom of the small pump that fits well on a horizontal or vertical glass surface to keep the pump running smoothly.
  • Removable and Cleanable: The water pump for aquarium can be disassembled and assembled easily without any tools. The removable pump head with filter sponge is easy to clean and prevents impurities from entering the pump, and the pump is small in size, making the pump easy to hide or camouflage and easy to carry.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

FREESEA Submersible Pump for Aquarium, Pond, Fountain, Hydroponics, Statuary – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also Consider:

ball lock jumperStainless Steel Ball Lock Jumper with Food Grade Silicone O-Rings: Allows you to connect multiple ball lock runs to clean multiple lines and taps at the same time. Works with both liquid and gas QDs.  Stainless Steel Ball Lock Jumper – via Valuebrew – An easy add-on… food grade o-rings, featured in our Keg Rebuild Post

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

400 GPH Utility Pump + Draft Line Cleaning Builds

FREESEA Submersible Pump for Aquarium, Pond, Fountain, Hydroponics, Statuary

FREESEA Submersible Pump

More Info

From the product description, check product page for current description, price and availability:

  • High Efficiency and High Quality Materials: Compared with other submersible pumps, This submersible water pump fountain has higher quality and performance. The fountain pump casing is made of high quality ABS plastic and resin, which is anti-corrosion, acid and alkali resistant and waterproof and the protection function of water-proof is IPX8.
  • Water Flow Control and two Water Outlets : The submersible pump has a flow size adjustment valve, you can adjust to get the required water flow and control the water flow.The FREESEA water pump for aquarium is equipped with two water nozzles (1/2 inch and 4/5 inch). Max Flow: 400 GPH. Max Height:5.9 ft.
  • Ultra-Quiet Design : The water pump aquarium is designed with high quality motor to provide a quiet working environment, also with the function of energy saving and low power consumption, even in the bedroom or at night (power: 25 Watt). The threaded fittings of the pump make it work more stable. The impeller shaft is made of stainless steel shaft which can be used for fresh water or sea water. It is resistant to abrasion, rust and has a long service life.
  • Filter sponge and Suction Cup and footpad : This pump has 1 filter sponge, which can effectively filter large blocks during pumping to prevent water pump blockage, effectively improve the circulation system to maintain a clean water environment.And there are four powerful suction cup or footpad at the bottom of the small pump that fits well on a horizontal or vertical glass surface to keep the pump running smoothly.
  • Removable and Cleanable: The water pump for aquarium can be disassembled and assembled easily without any tools. The removable pump head with filter sponge is easy to clean and prevents impurities from entering the pump, and the pump is small in size, making the pump easy to hide or camouflage and easy to carry.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

FREESEA Submersible Pump for Aquarium, Pond, Fountain, Hydroponics, Statuary – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also Consider:

ball lock jumperStainless Steel Ball Lock Jumper with Food Grade Silicone O-Rings: Allows you to connect multiple ball lock runs to clean multiple lines and taps at the same time. Works with both liquid and gas QDs.  Stainless Steel Ball Lock Jumper – via Valuebrew – An easy add-on… food grade o-rings, featured in our Keg Rebuild Post


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

Lyqily 740GPH Submersible Water Pump, Draft Line Cleaning, Potential Mark II Replacement & More

Lyqily 740GPH Water Pump Ultra Quiet 55W Submersible Fountain Aquarium Fish Pond Hydroponic Pump with 8.5ft High Lift, 5.9ft Three-pin Plug Power Cord, 3 Nozzles(0.51"/0.63"/0.75")

Lyqily 740GPH Submersible Water Pump Ultra Quiet 55W

More Info

From the product description, check product page for current description, price and availability:

Product Name: Submersible Pump

Ultra-quiet Mini Submersible Pump Compact Multifunctional Detachable

SPECIFICATION
Max Flow Rate: 2800L/H
Max Lift Height: 2.6m
Power: 55W
Voltage: 110-120V/60Hz
Length of Power Cord: 1.8m
Dimension: 105mm x 66mm x 88mm

OPERATE
Neither clog up the entrance of the pump nor suck any dirty liquids.
Should the pump be used on a dirty surface, lift it a bit so that a contact with debris is avoided.
To lower the flood of water, use the control lever located on the side of the pump.
Immerse the pump into the water before connecting it to the plug.
At the very beginning, the pump may not work out properly as it might have some air inside,
So just take it off the water and immerse it again: it will surely work out.

PRECAUTIONS
Always disconnect the plug before handling the pump.
Do not use it without water.
Do not grab it using its cable.
Use only cold water.
Use the pump only if completely immersed.

UPKEEP
Remove the frontal part of the pump and the fan and wash them under flowing water.
Do not remove the drum of the pump.
Remove the frontal part and check that the fan runs the proper way.
Check the pump monthly and make sure the pump and its exit are free of obstruction.


 

Potential Uses:

  • I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly
  • As part of a recirculating wort chiller setup (on the chilled water side).

This looks very similar to the pump featured in Sourcing a Replacement Pump for Mark’s Keg and Carboy Washer – the only thing I’m seeing that’s different is a 3 prong cord vs 2 prong

Lyqily 740GPH Water Pump Ultra Quiet 55W Submersible Fountain Aquarium Fish Pond Hydroponic Pump with 8.5ft High Lift, 5.9ft Three-pin Plug Power Cord, 3 Nozzles(0.51″/0.63″/0.75″) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link



This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

VIVOSUN 400 GPH Utility Pump + Draft Line Cleaning Builds

400 GPH Submersible Pump, Brushless Motor, Stainless Impeller Shaft + Recirculating Draft Line Cleaning Build

Winkeyes 400GPH Pump

More Info

From the product description, check product page for current description, price and availability:

Highlighted Features
  • USE BRUSHLESS MOTOR, run smoothly, low noise, long working life compared with brush motor, keep it quiet and not scare the fish.
  • ANTI DRY BURNING DESGIN, the fish pong pump can withstand 48 hours dry burning. So no need to worry about there is not enough water in your fish tank when you go on a short trip.
  • STRONG POWER HIGH LIFT, this fountain pump max lift height: 6.9ft. 25W high efficiency motor for energy saving. Lift height is a max height the water goes up, after connecting the water pipe to the nozzle (Make sure the joint sealed securely and tightly)
  • STAINLESS STEEL PUMP IMPELLER SHAFT, corrosion resistance, strong driving, long working life, so JAKIELAX submersible pump also fit for sea water
  • SUCTION CUP 2 NOZZLES ADJUSTABLE FLOW RATE, 4 individual powerful suction cups that hold the pump securely on the right side of aquarium, vertically or horizontally. water change pump has 2 nozzles for optional


From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

Winkeyes 400GPH Water Pump with 48 Hours Anti Dry Burning, Ultra Quiet 25W Submersible Fountain Aquarium Fish Pond Hydroponic Pump with 6.9ft High Lift, 5.9ft Power Cord, 2 Nozzles

– affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading

660 GPH Utility Pump by FREESEA + Draft Line Cleaning Builds

FREESEA 160-1100 GPH Submersible Water Pump for Pond Aquariums Hydroponics Fish Tank Garden Fountain Waterfall

FREESEA Submersible Water Pump

More Info


Highlighted Features
  • Powerful versatile: Our submersible water pump features an bottom inlet design that provides powerful suction, capable of pumping water as shallow as 5 mm. The 360° omnidirectional filter effectively removes debris and impurities ensuring thorough water circulation. With its detachable water outlet, it is suitable for various sizes of water pipes, making it versatile for different occasions such as fish tanks, ponds, aquariums, and hydroponic systems.
  • Intelligent Dry Heating Protection: The pond pump will stop from draining and pumping water, al long as the temperature reaches to 185 ℉(85℃), and the motor will restart working after the temperature goes down. This function can effectively reduce the damage caused by dry running.
  • Product Dimensions: This fountain water pump comes with 5.97ft power cord, and the max flow rate can be up to 660GPH, the max lift height can be up to 8.2FT.
  • Whisper-quiet and long-lasting: Our aquarium pump features an ultra-quiet motor that operates at less than 20 decibels, offering a quiet environment for your life. The fish tank pump durable and corrosion-resistant motor ensures a reliable performance, while the easy disassembly case of any blockage in the water inlet, simply clean it with fresh water before use, make maintenance a breeze.
  • Reliable performance and professional after-sales: Our small water pump with our 12-month 24-hour professional after-sales service, you can rest assured knowing that we are committed to providing exceptional customer support. If you have any questions or concerns about the water pump, please don't hesitate to reach out to us.


Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

FREESEA 660 GPH 40W Submersible Water Pump for Pond Aquarium Hydroponics Fish Tank Fountain Waterfall affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading

Chillzilla Counterflow Wort Chiller – $199.99 at Great Fermentations, Save $20

Chillzilla Wort Chiller

Chillzilla Counterflow Wort Chiller via Great Fermentations

More Info

From the product description, check product page for current description, price and availability:

The Chillzilla counterflow wort chiller is one of the quickest, easiest and most effective wort chillers on the market today! It has several unique features that set it apart from lesser chillers. First is its compact, heavy-duty copper construction which equals one tough unit with excellent thermal qualities that allow heat to be easily exchanged from hot wort to cold water. A 5 gallon batch can be cooled to ale pitching temperatures in 10 minutes or less, depending on chilling water temperatures.

In addition to its tough copper construction, Chillzilla includes a tube-in-tube design, where cold water flows through the outer tube in one direction, while hot wort flows through a twisted inner copper tube in the opposite direction. The twisted inner tube creates more turbulence in the cold water, which maximizes chilling, and the shape increases hot wort surface area, allowing wort to be chilled faster.

The Chillzilla also uses very little water, yet is quite effective at doing its job! Compact in size, measuring just 10 inches from the top of the coil to bottom and having a diameter of 6 inches, means that the Chillzilla can be mounted practically anywhere that is convenient! The all metal construction allows sanitation to be accomplished by boiling, heating or use of traditional sanitizers such as Star-San. You’ve never truly chilled until you’ve chilled with the Chillzilla!

NOTE: While it is possible to gravity feed the Chillzilla, using a brew pump like a RipTide brewing pump is highly recommended.

PRODUCT SPECIFICATIONS
Hot Wort Inlet: 1/2 in. male NPT
Hot Wort Outlet: 1/2 in. Barb
Cold Water Inlet/Outlet: 3/4 in. garden hose fitting
Construction: Copper


 

Great Fermentations has this marked down $20 to $199.99 for a limited time. No coupon code is needed, check product page for current price & availability.

Chillzilla Counterflow Wort Chiller

Check sale or product page for current availability & pricing


pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

Kedsum 880 GPH Submersible Pump + Recirculating Draft Line Cleaning Build

KEDSUM 880GPH Submersible Pump(3500L/H, 100W), Ultra Quiet Water Pump with 10ft High Lift, Fountain Pump with 5.9 ft Power Cord, 3 Nozzles for Fish Tank , Pond , Aquarium, Statuary, Hydroponics

KEDSUM Submersible Pump

More Info

From the product description, check product page for current description, price and availability:

  • ★Powerful Speed Flow: Max Flow Rate: 880 GPH per hour(3500L/H), Max Lift Height: up to 10 Feet.(Length of power cord:5.9ft)
  • ★Ultra Quiet: This water pump is designed for reliability and ultra-quiet operation to provide years of service, energy-saving and low power consumption.(Power: 100 W,Voltage: 110V)
  • ★Perfect size: This profile size water pump is great to hide or disguise (Dimensions: 5.1″(H)*5.1″(L)*3.9″(W)).With no seals or messy oils ,the suction cups mounting feet for either vertical or horizontal mounting.
  • ★3 Outlet Adapters: Equipped with 3 Outlet Adapters ,one is 0.51inch,one is 0.63inch ,and the other is 0.75inch, providing a different water flow as you desired.This submersible pump is ideal for fresh-water, salt-water, can be applied in aquarium, fountains, spout, hydroponic and pond.
  • ★Detachable and Cleanable: The water pump is easy to detach to clean. [NOTE: This water pump is metric threads. Pump metric threaded fit for vinyl tubing, need a 13mm metric to 0.5″ NPT Adapter to fit for standard 1/2″ threaded PVC fitting.]

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

KEDSUM Submersible Pump – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also Consider:

ball lock jumperStainless Steel Ball Lock Jumper with Food Grade Silicone O-Rings: Allows you to connect multiple ball lock runs to clean multiple lines and taps at the same time. Works with both liquid and gas QDs.  Stainless Steel Ball Lock Jumper – via Valuebrew – An easy add-on… food grade o-rings, featured in our Keg Rebuild Post


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

400 GPH Utility Pump + Draft Line Cleaning Builds

FREESEA Submersible Pump for Aquarium, Pond, Fountain, Hydroponics, Statuary

FREESEA Submersible Pump

More Info

From the product description, check product page for current description, price and availability:

  • High Efficiency and High Quality Materials: Compared with other submersible pumps, This submersible water pump fountain has higher quality and performance. The fountain pump casing is made of high quality ABS plastic and resin, which is anti-corrosion, acid and alkali resistant and waterproof and the protection function of water-proof is IPX8.
  • Water Flow Control and two Water Outlets : The submersible pump has a flow size adjustment valve, you can adjust to get the required water flow and control the water flow.The FREESEA water pump for aquarium is equipped with two water nozzles (1/2 inch and 4/5 inch). Max Flow: 400 GPH. Max Height:5.9 ft.
  • Ultra-Quiet Design : The water pump aquarium is designed with high quality motor to provide a quiet working environment, also with the function of energy saving and low power consumption, even in the bedroom or at night (power: 25 Watt). The threaded fittings of the pump make it work more stable. The impeller shaft is made of stainless steel shaft which can be used for fresh water or sea water. It is resistant to abrasion, rust and has a long service life.
  • Filter sponge and Suction Cup and footpad : This pump has 1 filter sponge, which can effectively filter large blocks during pumping to prevent water pump blockage, effectively improve the circulation system to maintain a clean water environment.And there are four powerful suction cup or footpad at the bottom of the small pump that fits well on a horizontal or vertical glass surface to keep the pump running smoothly.
  • Removable and Cleanable: The water pump for aquarium can be disassembled and assembled easily without any tools. The removable pump head with filter sponge is easy to clean and prevents impurities from entering the pump, and the pump is small in size, making the pump easy to hide or camouflage and easy to carry.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

FREESEA Submersible Pump for Aquarium, Pond, Fountain, Hydroponics, Statuary – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also Consider:

ball lock jumperStainless Steel Ball Lock Jumper with Food Grade Silicone O-Rings: Allows you to connect multiple ball lock runs to clean multiple lines and taps at the same time. Works with both liquid and gas QDs.  Stainless Steel Ball Lock Jumper – via Valuebrew – An easy add-on… food grade o-rings, featured in our Keg Rebuild Post


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

Hands on Review: Kegland Stainless Steel Counterflow Chiller

kegland chiller review

This review is by Homebrew Finds Contributor Brad Probert.  Brad is an engineer, expert homebrewer and experienced reviewer.  Grab a link to Brad’s website at the end of this review.

Kegland Stainless Counterflow Chiller

In the past, I did some trials on the different types of wort chillers, and ended up with a counterflow chiller as the best solution for me. Of course, it depends on what you are prioritizing as a feature. Plate chillers are the fastest, but after I had a clogging incident, I had no confidence I could ever get it 100% clean again. Immersion chillers (even fancy ones) were slower, but most notably, they required me to continually bob them up and down in order to really be effective. The counterflow chiller is fast, and the relatively large passageways mean you don’t have to worry about debris clogging them up.


Check Current Price & Availability, Review Continues Below:


Here’s how a Counter Flow Chiller (CFC) works. You wort flows inside a smaller diameter tube, which sits inside a larger diameter tube that’s filled with your cooling water. Heat gets drawn out of the wort through the conductive walls of the inner tube (made of heat-conductive metal like copper or stainless steel). To keep the package size compact, these very long lengths of tubing get coiled up on top of each other like a snake. And there are 4 connections- wort in, wort out, cooling water in, cooling water out.

Continue reading

660 GPH Utility Pump by FREESEA + free prime ship & Draft Line Cleaning Builds

FREESEA 160-1100 GPH Submersible Water Pump for Pond Aquariums Hydroponics Fish Tank Garden Fountain Waterfall

FREESEA Submersible Water Pump

More Info


Highlighted Features
  • Powerful versatile: Our submersible water pump features an bottom inlet design that provides powerful suction, capable of pumping water as shallow as 5 mm. The 360° omnidirectional filter effectively removes debris and impurities ensuring thorough water circulation. With its detachable water outlet, it is suitable for various sizes of water pipes, making it versatile for different occasions such as fish tanks, ponds, aquariums, and hydroponic systems.
  • Intelligent Dry Heating Protection: The pond pump will stop from draining and pumping water, al long as the temperature reaches to 185 ℉(85℃), and the motor will restart working after the temperature goes down. This function can effectively reduce the damage caused by dry running.
  • Product Dimensions: This fountain water pump comes with 5.97ft power cord, and the max flow rate can be up to 660GPH, the max lift height can be up to 8.2FT.
  • Whisper-quiet and long-lasting: Our aquarium pump features an ultra-quiet motor that operates at less than 20 decibels, offering a quiet environment for your life. The fish tank pump durable and corrosion-resistant motor ensures a reliable performance, while the easy disassembly case of any blockage in the water inlet, simply clean it with fresh water before use, make maintenance a breeze.
  • Reliable performance and professional after-sales: Our small water pump with our 12-month 24-hour professional after-sales service, you can rest assured knowing that we are committed to providing exceptional customer support. If you have any questions or concerns about the water pump, please don't hesitate to reach out to us.


Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

FREESEA 660 GPH 40W Submersible Water Pump for Pond Aquarium Hydroponics Fish Tank Fountain Waterfall affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading

Today Only: Modular Immersion Chiller – $49.99 at Williams Brewing

Modular Immersion Chiller at Williams Brewing

Modular Immersion Chiller from William’s Brewing

More Info

From the product description, check product page for current description, price and availability:

Immersion wort chillers are great in that they are easy to clean and easy to use. However, having the cooling water hoses attached all the time gets to be tiresome, as you have to deal with the chiller with long hoses full of water once you are done cooling a batch. Our new Modular Immersion Chiller solves this problem. No more lugging around a chiller, cleaning it, and storing it with the unwieldy hoses attached.

This 25′ stainless cooling coil features quick disconnect hose fittings, compatible with Melnor and other quick disconnect hose systems. Best of all, because it is easy to connect and disconnect, It can be adapted to a wide variety of purposes including connecting two in series so you can pre chill your cooling tap water in an ice bath in the warmer months before cooling your wort or still head.

For use as a pre chiller in areas with warmer tap water, hook up two units in series with the first chiller in an ice bath, and the second in your wort. Or if distilling, use one Modular Immersion Chiller to pre chill your still head water, connected between your tap water source and a still head with quick disconnect fittings like our items C74 and C75.

Fits most boiling pots, as well as the Mash & Boil, Grainfather, Brewzilla, and Robobrew. It fits ½” interior diameter tubing (not included, see our optional discounted Chiller Tubing Kit). 15½” tall to the inlets and outlets, and the coil is 7¼” wide.

This also works great as a pre chiller for a wort chiller. Just pipe this coil into your cooling water supply line and pipe your wort chiller into the exit. Then place this in a 5 gallon pail full of ice and water, and you can chill wort even in Florida or Hawaii on a hot day.


 

Modular Immersion Chiller at Williams Brewing

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

boxtech Submersible Water Pump – 265 GPH + Draft Line Cleaning Build

boxtech Submersible Water Pump, Aquarium Water Pump, Fountain Pump, 25W/ 35W/ 45W/60W Ultra Quiet Water Pump for Fish Tank, Aquarium, Pond, Fountain, Hydroponics and Statuary

boxtech Submersible Water Pump

More Info

From the product description, check product page for current description, price and availability:

  • A multi-functional Submersible pump=Add water+Change water+Circulating water+Sucking fish manure. Equipped with 2 water outlets and 5.6 Ft power cord, can be applied in aquarium, fountains, hydroponic and pond
  • Water pump with bottom suction trainer,100% submersible.The pump motor is sealed with high-quality resin and has better insulation performance, which can effectively prevent Water leakage and Electric leakage
  • Max Flow Rate: 265 GPH per hour, Max Lift height: up to 5.6 Feet. 25W high efficiency motor for energy saving, and low water level design
  • This submersible water pump is multi-purpose water pump with low power consumption, low noise, balanced speed, reliable operation, long service life, easy to maintain
  • Backed by 12 month warranty and professional after-sale service within 24hrs

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

boxtech Submersible Water Pump, Aquarium Water Pump, Fountain Pump, 25W/ 35W/ 45W/60W Ultra Quiet Water Pump for Fish Tank, Aquarium, Pond, Fountain, Hydroponics and Statuary – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link



This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

Reader Tip: Stainless Steel Counterflow Chiller… $128 at Kegco

Thanks to HBF Reader Tom for this tip!  [8 Ways to Connect with HBF]kegco counterflow chiller

More Info

From the product description, check product page for current description, price and availability:

  • This chiller speeds the chilling process of your wort twice as fast as a standard immersion wort chiller
  • It is constructed in stainless steel and designed to use with any size brew pots or kettles
  • Pumps hot wort and cold water in and out from opposite directions
  • Features two wort feedings and two water hose connection
  • Chiller is approximately 10-1/4″ high and 6″ in diameter

 

  • This is on sale for just $128.
  • Compare at Amazon
  • No coupon code required, check product page for current availability and price.

STAINLESS STEEL COUNTERFLOW CHILLER KC FL-SCFC

Check sale or product page for current availability & pricing


pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Price, promotions and availability can change quickly.  Check the product page for current price, description and availability.

400 GPH Utility Pump + Draft Line Cleaning Builds

FREESEA Submersible Pump for Aquarium, Pond, Fountain, Hydroponics, Statuary

FREESEA Submersible Pump

More Info

From the product description, check product page for current description, price and availability:

  • High Efficiency and High Quality Materials: Compared with other submersible pumps, This submersible water pump fountain has higher quality and performance. The fountain pump casing is made of high quality ABS plastic and resin, which is anti-corrosion, acid and alkali resistant and waterproof and the protection function of water-proof is IPX8.
  • Water Flow Control and two Water Outlets : The submersible pump has a flow size adjustment valve, you can adjust to get the required water flow and control the water flow.The FREESEA water pump for aquarium is equipped with two water nozzles (1/2 inch and 4/5 inch). Max Flow: 400 GPH. Max Height:5.9 ft.
  • Ultra-Quiet Design : The water pump aquarium is designed with high quality motor to provide a quiet working environment, also with the function of energy saving and low power consumption, even in the bedroom or at night (power: 25 Watt). The threaded fittings of the pump make it work more stable. The impeller shaft is made of stainless steel shaft which can be used for fresh water or sea water. It is resistant to abrasion, rust and has a long service life.
  • Filter sponge and Suction Cup and footpad : This pump has 1 filter sponge, which can effectively filter large blocks during pumping to prevent water pump blockage, effectively improve the circulation system to maintain a clean water environment.And there are four powerful suction cup or footpad at the bottom of the small pump that fits well on a horizontal or vertical glass surface to keep the pump running smoothly.
  • Removable and Cleanable: The water pump for aquarium can be disassembled and assembled easily without any tools. The removable pump head with filter sponge is easy to clean and prevents impurities from entering the pump, and the pump is small in size, making the pump easy to hide or camouflage and easy to carry.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

FREESEA Submersible Pump for Aquarium, Pond, Fountain, Hydroponics, Statuary – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also Consider:

ball lock jumperStainless Steel Ball Lock Jumper with Food Grade Silicone O-Rings: Allows you to connect multiple ball lock runs to clean multiple lines and taps at the same time. Works with both liquid and gas QDs.  Stainless Steel Ball Lock Jumper – via Valuebrew – An easy add-on… food grade o-rings, featured in our Keg Rebuild Post


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

boxtech Submersible Water Pump – 265 GPH + Draft Line Cleaning Build

boxtech Submersible Water Pump, Aquarium Water Pump, Fountain Pump, 25W/ 35W/ 45W/60W Ultra Quiet Water Pump for Fish Tank, Aquarium, Pond, Fountain, Hydroponics and Statuary

boxtech Submersible Water Pump

More Info

From the product description, check product page for current description, price and availability:

  • A multi-functional Submersible pump=Add water+Change water+Circulating water+Sucking fish manure. Equipped with 2 water outlets and 5.6 Ft power cord, can be applied in aquarium, fountains, hydroponic and pond
  • Water pump with bottom suction trainer,100% submersible.The pump motor is sealed with high-quality resin and has better insulation performance, which can effectively prevent Water leakage and Electric leakage
  • Max Flow Rate: 265 GPH per hour, Max Lift height: up to 5.6 Feet. 25W high efficiency motor for energy saving, and low water level design
  • This submersible water pump is multi-purpose water pump with low power consumption, low noise, balanced speed, reliable operation, long service life, easy to maintain
  • Backed by 12 month warranty and professional after-sale service within 24hrs

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

boxtech Submersible Water Pump, Aquarium Water Pump, Fountain Pump, 25W/ 35W/ 45W/60W Ultra Quiet Water Pump for Fish Tank, Aquarium, Pond, Fountain, Hydroponics and Statuary – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link



This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

660 GPH Utility Pump by FREESEA + Draft Line Cleaning Builds

FREESEA 160-1100 GPH Submersible Water Pump for Pond Aquariums Hydroponics Fish Tank Garden Fountain Waterfall

FREESEA Submersible Water Pump

More Info


Highlighted Features
  • Powerful versatile: Our submersible water pump features an bottom inlet design that provides powerful suction, capable of pumping water as shallow as 5 mm. The 360° omnidirectional filter effectively removes debris and impurities ensuring thorough water circulation. With its detachable water outlet, it is suitable for various sizes of water pipes, making it versatile for different occasions such as fish tanks, ponds, aquariums, and hydroponic systems.
  • Intelligent Dry Heating Protection: The pond pump will stop from draining and pumping water, al long as the temperature reaches to 185 ℉(85℃), and the motor will restart working after the temperature goes down. This function can effectively reduce the damage caused by dry running.
  • Product Dimensions: This fountain water pump comes with 5.97ft power cord, and the max flow rate can be up to 660GPH, the max lift height can be up to 8.2FT.
  • Whisper-quiet and long-lasting: Our aquarium pump features an ultra-quiet motor that operates at less than 20 decibels, offering a quiet environment for your life. The fish tank pump durable and corrosion-resistant motor ensures a reliable performance, while the easy disassembly case of any blockage in the water inlet, simply clean it with fresh water before use, make maintenance a breeze.
  • Reliable performance and professional after-sales: Our small water pump with our 12-month 24-hour professional after-sales service, you can rest assured knowing that we are committed to providing exceptional customer support. If you have any questions or concerns about the water pump, please don't hesitate to reach out to us.


Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

FREESEA 660 GPH 40W Submersible Water Pump for Pond Aquarium Hydroponics Fish Tank Fountain Waterfall affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading

HFS(R) Homebrew Beer Wort Plate Chiller

HFS(R) Homebrew Beer Wort Chiller (7.5'' 2.9''/20 plate, 1/2" x 1/2" NPT)

HFS(R) Homebrew Beer Wort Chiller (7.5” 2.9”/20 plate, 1/2″ x 1/2″ NPT)

More Info

From the product description, check product page for current description, price and availability:

  • 304 Stainless with 99.9% Copper Brazing
  • 2.9″W x 7.5″L x 20 Plates— 1/2″NPT Wort Fitting x 3/4″ NPT Water Fitting

 

HFS(R) Homebrew Beer Wort Chiller (7.5” 2.9”/20 plate, 1/2″ x 1/2″ NPT) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

ZChiller – Spiral Star Design Counterflow Wort Chillers – Made in the US – $169.99, Save $20 + free shipping

Large ZChillerZChillers are made in the US by Packless Industries located in Waco, Texas.

 ZChillers are double tube counter flow wort chillers.  The interior tubing is a Spiral Star Design.  This spiraling increases the surface area of copper that’s in contact with your wort.  It also increases turbulence.  More movement across more surface area means your wort chills quickly.

from AIH: “The ZChiller utilizes the enhanced thermal gradients of a counterflow wort chiller with the added benefit of greater surface area for heat transfer. Instead of a simple, cylindrical inner tube, the ZChiller utilizes a unique, convoluted “spiral star” design that enables superior heat transfer out of the wort as well as unparalleled cooling uniformity for consistent cold breaks and record cooling times. The chilling ability matches or exceeds that of plate chillers without the downside of disruptive clogs.”

These advantages result in:

  • Reduced chilling time.
  • More efficient cold break to remove unwanted proteins and particulates from your beer.
  • Cleaner aroma profile because of decrease in DMS production, giving you a more pronounced aroma that you have worked so hard for.
  • Easier cleaning, especially when compared to a plate chiller.

  • This is selling for $189.99
  • Save $20: Adventures in Homebrewing is offering up to $30 off your purchase, depending on your order total.  Get $10 off $80, $20 off $160 and $30 off $240.  No coupon code is required, the discounted amount should be automatically be reflected in your cart before checkout.  Nearly everything qualifies including existing sale items, although their are a few exceptions.  See terms and conditions.
  • Get Free Shipping!  Adventures in Homebrewing is offering free shipping on most orders of $55 or more to addresses in the contiguous US.

Large ZChiller via Adventures in Homebrewing

Check sale or product page for current availability & pricing


This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

aih

Price, promotions and availability can change quickly.  Check the product page for current price, description and availability. prod:zchillers tag:brewmore